Major IDF and Arduino Update

WiFi and BlueTooth can now be started and stopped at will.
basic functions added to esp32-hal to start and stop the BT radio
SimpleBLE class added to show the most basic functionality
Example to show how to switch between BT, WiFi or Both

cores/esp32/esp32-hal-bt.c

@@ -0,0 +1,65 @@
+// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#include "esp32-hal-bt.h"
+
+#include "bt.h"
+#include "esp_bt_defs.h"
+#include "esp_bt_main.h"
+
+bool btStarted(){
+    return (esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_ENABLED);
+}
+
+bool btStart(){
+    if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_ENABLED){
+        return true;
+    }
+    if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_IDLE){
+        esp_bt_controller_init();
+        while(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_IDLE){}
+    }
+    if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_INITED){
+        if (esp_bt_controller_enable(ESP_BT_MODE_BTDM)) {
+            log_e("BT Enable failed");
+            return false;
+        }
+    }
+    if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_ENABLED){
+        return true;
+    }
+    log_e("BT Start failed");
+    return false;
+}
+
+bool btStop(){
+    if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_IDLE){
+        return true;
+    }
+    if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_ENABLED){
+        if (esp_bt_controller_disable(ESP_BT_MODE_BTDM)) {
+            log_e("BT Disable failed");
+            return false;
+        }
+        while(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_ENABLED);
+    }
+    if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_INITED){
+        return true;
+    }
+    log_e("BT Stop failed");
+    return false;
+}
+
+
+

cores/esp32/esp32-hal-bt.h

@@ -0,0 +1,32 @@
+// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef _ESP32_ESP32_HAL_BT_H_
+#define _ESP32_ESP32_HAL_BT_H_
+
+#include "esp32-hal.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+bool btStarted();
+bool btStart();
+bool btStop();
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ESP32_ESP32_HAL_BT_H_ */

cores/esp32/esp32-hal-misc.c

@@ -19,49 +19,6 @@
 #include "esp_attr.h"
 #include "nvs_flash.h"
 
-#if !CONFIG_ESP32_PHY_AUTO_INIT
-#include "esp_phy_init.h"
-#include "rom/rtc.h"
-void arduino_phy_init()
-{
-    static bool initialized = false;
-    if(initialized){
-        return;
-    }
-    esp_phy_calibration_mode_t calibration_mode = PHY_RF_CAL_PARTIAL;
-    if (rtc_get_reset_reason(0) == DEEPSLEEP_RESET) {
-        calibration_mode = PHY_RF_CAL_NONE;
-    }
-    const esp_phy_init_data_t* init_data = esp_phy_get_init_data();
-    if (init_data == NULL) {
-        printf("failed to obtain PHY init data\n");
-        abort();
-    }
-    esp_phy_calibration_data_t* cal_data =
-            (esp_phy_calibration_data_t*) calloc(sizeof(esp_phy_calibration_data_t), 1);
-    if (cal_data == NULL) {
-        printf("failed to allocate memory for RF calibration data\n");
-        abort();
-    }
-    esp_err_t err = esp_phy_load_cal_data_from_nvs(cal_data);
-    if (err != ESP_OK) {
-        printf("failed to load RF calibration data, falling back to full calibration\n");
-        calibration_mode = PHY_RF_CAL_FULL;
-    }
-
-    esp_phy_init(init_data, calibration_mode, cal_data);
-
-    if (calibration_mode != PHY_RF_CAL_NONE) {
-        err = esp_phy_store_cal_data_to_nvs(cal_data);
-    } else {
-        err = ESP_OK;
-    }
-    esp_phy_release_init_data(init_data);
-    free(cal_data); // PHY maintains a copy of calibration data, so we can free this
-    initialized = true;
-}
-#endif
-
 void yield()
 {
     vPortYield();
@@ -106,18 +63,10 @@ void initVariant() {}
 void init() __attribute__((weak));
 void init() {}
 
-void initWiFi() __attribute__((weak));
-void initWiFi() {}
-
-void initBT() __attribute__((weak));
-void initBT() {}
-
 void initArduino(){
     nvs_flash_init();
     init();
     initVariant();
-    initWiFi();
-    initBT();
 }
 
 //used by hal log

cores/esp32/esp32-hal.h

@@ -58,6 +58,7 @@ void yield(void);
 #include "esp32-hal-ledc.h"
 #include "esp32-hal-sigmadelta.h"
 #include "esp32-hal-timer.h"
+#include "esp32-hal-bt.h"
 #include "esp_system.h"
 
 uint32_t micros();