feedc0de/arduino-esp32
1
0
Fork 0
forked from espressif/arduino-esp32
Code Pull Requests Activity

IDF release/v3.3 (#3672)

Browse Source 
ESP-IDF release/v3.3: 66d3783c8
esp-face: 420fc7e
esp32-camera: 0107093
This commit is contained in:
Me No Dev
2020-11-03 21:20:00 +02:00
committed by GitHub
parent 6e5be78838
commit 22b427df0f
256 changed files with 6074 additions and 1011 deletions
Download Patch File Download Diff File Expand all files Collapse all files

243
tools/sdk/include/mbedtls/mbedtls/ctr_drbg.h
View File

@ -1,7 +1,8 @@
/**
* \file ctr_drbg.h
*
* \brief This file contains CTR_DRBG definitions and functions.
* \brief This file contains definitions and functions for the
* CTR_DRBG pseudorandom generator.
*
* CTR_DRBG is a standardized way of building a PRNG from a block-cipher
* in counter mode operation, as defined in <em>NIST SP 800-90A:
@ -9,14 +10,42 @@
* Bit Generators</em>.
*
* The Mbed TLS implementation of CTR_DRBG uses AES-256 (default) or AES-128
* as the underlying block cipher.
* (if \c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled at compile time)
* as the underlying block cipher, with a derivation function.
* The initial seeding grabs #MBEDTLS_CTR_DRBG_ENTROPY_LEN bytes of entropy.
* See the documentation of mbedtls_ctr_drbg_seed() for more details.
*
* \warning Using 128-bit keys for CTR_DRBG limits the security of generated
* keys and operations that use random values generated to 128-bit security.
* Based on NIST SP 800-90A §10.2.1 table 3 and NIST SP 800-57 part 1 table 2,
* here are the security strengths achieved in typical configuration:
* - 256 bits under the default configuration of the library, with AES-256
* and with #MBEDTLS_CTR_DRBG_ENTROPY_LEN set to 48 or more.
* - 256 bits if AES-256 is used, #MBEDTLS_CTR_DRBG_ENTROPY_LEN is set
* to 32 or more, and the DRBG is initialized with an explicit
* nonce in the \c custom parameter to mbedtls_ctr_drbg_seed().
* - 128 bits if AES-256 is used but #MBEDTLS_CTR_DRBG_ENTROPY_LEN is
* between 24 and 47 and the DRBG is not initialized with an explicit
* nonce (see mbedtls_ctr_drbg_seed()).
* - 128 bits if AES-128 is used (\c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY enabled)
* and #MBEDTLS_CTR_DRBG_ENTROPY_LEN is set to 24 or more (which is
* always the case unless it is explicitly set to a different value
* in config.h).
*
* Note that the value of #MBEDTLS_CTR_DRBG_ENTROPY_LEN defaults to:
* - \c 48 if the module \c MBEDTLS_SHA512_C is enabled and the symbol
* \c MBEDTLS_ENTROPY_FORCE_SHA256 is disabled at compile time.
* This is the default configuration of the library.
* - \c 32 if the module \c MBEDTLS_SHA512_C is disabled at compile time.
* - \c 32 if \c MBEDTLS_ENTROPY_FORCE_SHA256 is enabled at compile time.
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
* Copyright (C) 2006-2019, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
@ -30,6 +59,27 @@
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* **********
*
* This file is part of Mbed TLS (https://tls.mbed.org)
*/
@ -56,9 +106,19 @@
#define MBEDTLS_CTR_DRBG_BLOCKSIZE 16 /**< The block size used by the cipher. */
#if defined(MBEDTLS_CTR_DRBG_USE_128_BIT_KEY)
#define MBEDTLS_CTR_DRBG_KEYSIZE 16 /**< The key size used by the cipher (compile-time choice: 128 bits). */
#define MBEDTLS_CTR_DRBG_KEYSIZE 16
/**< The key size in bytes used by the cipher.
*
* Compile-time choice: 16 bytes (128 bits)
* because #MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled.
*/
#else
#define MBEDTLS_CTR_DRBG_KEYSIZE 32 /**< The key size used by the cipher (compile-time choice: 256 bits). */
#define MBEDTLS_CTR_DRBG_KEYSIZE 32
/**< The key size in bytes used by the cipher.
*
* Compile-time choice: 32 bytes (256 bits)
* because \c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled.
*/
#endif
#define MBEDTLS_CTR_DRBG_KEYBITS ( MBEDTLS_CTR_DRBG_KEYSIZE * 8 ) /**< The key size for the DRBG operation, in bits. */
@ -73,21 +133,31 @@
* \{
*/
/** \def MBEDTLS_CTR_DRBG_ENTROPY_LEN
*
* \brief The amount of entropy used per seed by default, in bytes.
*/
#if !defined(MBEDTLS_CTR_DRBG_ENTROPY_LEN)
#if defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256)
/** This is 48 bytes because the entropy module uses SHA-512
* (\c MBEDTLS_ENTROPY_FORCE_SHA256 is disabled).
*/
#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48
/**< The amount of entropy used per seed by default:
* <ul><li>48 with SHA-512.</li>
* <li>32 with SHA-256.</li></ul>
#else /* defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256) */
/** This is 32 bytes because the entropy module uses SHA-256
* (the SHA512 module is disabled or
* \c MBEDTLS_ENTROPY_FORCE_SHA256 is enabled).
*/
#else
#if !defined(MBEDTLS_CTR_DRBG_USE_128_BIT_KEY)
/** \warning To achieve a 256-bit security strength, you must pass a nonce
* to mbedtls_ctr_drbg_seed().
*/
#endif /* !defined(MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) */
#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 32
/**< Amount of entropy used per seed by default:
* <ul><li>48 with SHA-512.</li>
* <li>32 with SHA-256.</li></ul>
*/
#endif
#endif
#endif /* defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256) */
#endif /* !defined(MBEDTLS_CTR_DRBG_ENTROPY_LEN) */
#if !defined(MBEDTLS_CTR_DRBG_RESEED_INTERVAL)
#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000
@ -106,7 +176,7 @@
#if !defined(MBEDTLS_CTR_DRBG_MAX_SEED_INPUT)
#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384
/**< The maximum size of seed or reseed buffer. */
/**< The maximum size of seed or reseed buffer in bytes. */
#endif
/* \} name SECTION: Module settings */
@ -164,17 +234,68 @@ void mbedtls_ctr_drbg_init( mbedtls_ctr_drbg_context *ctx );
* \brief This function seeds and sets up the CTR_DRBG
* entropy source for future reseeds.
*
* \note Personalization data can be provided in addition to the more generic
* entropy source, to make this instantiation as unique as possible.
* A typical choice for the \p f_entropy and \p p_entropy parameters is
* to use the entropy module:
* - \p f_entropy is mbedtls_entropy_func();
* - \p p_entropy is an instance of ::mbedtls_entropy_context initialized
* with mbedtls_entropy_init() (which registers the platform's default
* entropy sources).
*
* The entropy length is #MBEDTLS_CTR_DRBG_ENTROPY_LEN by default.
* You can override it by calling mbedtls_ctr_drbg_set_entropy_len().
*
* You can provide a personalization string in addition to the
* entropy source, to make this instantiation as unique as possible.
*
* \note The _seed_material_ value passed to the derivation
* function in the CTR_DRBG Instantiate Process
* described in NIST SP 800-90A §10.2.1.3.2
* is the concatenation of the string obtained from
* calling \p f_entropy and the \p custom string.
* The origin of the nonce depends on the value of
* the entropy length relative to the security strength.
* - If the entropy length is at least 1.5 times the
* security strength then the nonce is taken from the
* string obtained with \p f_entropy.
* - If the entropy length is less than the security
* strength, then the nonce is taken from \p custom.
* In this case, for compliance with SP 800-90A,
* you must pass a unique value of \p custom at
* each invocation. See SP 800-90A §8.6.7 for more
* details.
*/
#if MBEDTLS_CTR_DRBG_ENTROPY_LEN < MBEDTLS_CTR_DRBG_KEYSIZE * 3 / 2
/** \warning When #MBEDTLS_CTR_DRBG_ENTROPY_LEN is less than
* #MBEDTLS_CTR_DRBG_KEYSIZE * 3 / 2, to achieve the
* maximum security strength permitted by CTR_DRBG,
* you must pass a value of \p custom that is a nonce:
* this value must never be repeated in subsequent
* runs of the same application or on a different
* device.
*/
#endif
/**
* \param ctx The CTR_DRBG context to seed.
* It must have been initialized with
* mbedtls_ctr_drbg_init().
* After a successful call to mbedtls_ctr_drbg_seed(),
* you may not call mbedtls_ctr_drbg_seed() again on
* the same context unless you call
* mbedtls_ctr_drbg_free() and mbedtls_ctr_drbg_init()
* again first.
* \param f_entropy The entropy callback, taking as arguments the
* \p p_entropy context, the buffer to fill, and the
length of the buffer.
* \param p_entropy The entropy context.
* \param custom Personalization data, that is device-specific
identifiers. Can be NULL.
* \param len The length of the personalization data.
* length of the buffer.
* \p f_entropy is always called with a buffer size
* equal to the entropy length.
* \param p_entropy The entropy context to pass to \p f_entropy.
* \param custom The personalization string.
* This can be \c NULL, in which case the personalization
* string is empty regardless of the value of \p len.
* \param len The length of the personalization string.
* This must be at most
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT
* - #MBEDTLS_CTR_DRBG_ENTROPY_LEN.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on failure.
@ -197,7 +318,8 @@ void mbedtls_ctr_drbg_free( mbedtls_ctr_drbg_context *ctx );
* The default value is off.
*
* \note If enabled, entropy is gathered at the beginning of
* every call to mbedtls_ctr_drbg_random_with_add().
* every call to mbedtls_ctr_drbg_random_with_add()
* or mbedtls_ctr_drbg_random().
* Only use this if your entropy source has sufficient
* throughput.
*
@ -209,18 +331,37 @@ void mbedtls_ctr_drbg_set_prediction_resistance( mbedtls_ctr_drbg_context *ctx,
/**
* \brief This function sets the amount of entropy grabbed on each
* seed or reseed. The default value is
* #MBEDTLS_CTR_DRBG_ENTROPY_LEN.
* seed or reseed.
*
* The default value is #MBEDTLS_CTR_DRBG_ENTROPY_LEN.
*
* \note The security strength of CTR_DRBG is bounded by the
* entropy length. Thus:
* - When using AES-256
* (\c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled,
* which is the default),
* \p len must be at least 32 (in bytes)
* to achieve a 256-bit strength.
* - When using AES-128
* (\c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled)
* \p len must be at least 16 (in bytes)
* to achieve a 128-bit strength.
*
* \param ctx The CTR_DRBG context.
* \param len The amount of entropy to grab.
* \param len The amount of entropy to grab, in bytes.
* This must be at most #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT.
*/
void mbedtls_ctr_drbg_set_entropy_len( mbedtls_ctr_drbg_context *ctx,
size_t len );
/**
* \brief This function sets the reseed interval.
* The default value is #MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
*
* The reseed interval is the number of calls to mbedtls_ctr_drbg_random()
* or mbedtls_ctr_drbg_random_with_add() after which the entropy function
* is called again.
*
* The default value is #MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
*
* \param ctx The CTR_DRBG context.
* \param interval The reseed interval.
@ -233,8 +374,12 @@ void mbedtls_ctr_drbg_set_reseed_interval( mbedtls_ctr_drbg_context *ctx,
* extracts data from the entropy source.
*
* \param ctx The CTR_DRBG context.
* \param additional Additional data to add to the state. Can be NULL.
* \param additional Additional data to add to the state. Can be \c NULL.
* \param len The length of the additional data.
* This must be less than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT - \c entropy_len
* where \c entropy_len is the entropy length
* configured for the context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on failure.
@ -246,7 +391,8 @@ int mbedtls_ctr_drbg_reseed( mbedtls_ctr_drbg_context *ctx,
* \brief This function updates the state of the CTR_DRBG context.
*
* \param ctx The CTR_DRBG context.
* \param additional The data to update the state with.
* \param additional The data to update the state with. This must not be
* \c NULL unless \p add_len is \c 0.
* \param add_len Length of \p additional in bytes. This must be at
* most #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT.
*
@ -264,14 +410,23 @@ int mbedtls_ctr_drbg_update_ret( mbedtls_ctr_drbg_context *ctx,
* \brief This function updates a CTR_DRBG instance with additional
* data and uses it to generate random data.
*
* \note The function automatically reseeds if the reseed counter is exceeded.
* This function automatically reseeds if the reseed counter is exceeded
* or prediction resistance is enabled.
*
* \param p_rng The CTR_DRBG context. This must be a pointer to a
* #mbedtls_ctr_drbg_context structure.
* \param output The buffer to fill.
* \param output_len The length of the buffer.
* \param additional Additional data to update. Can be NULL.
* \param add_len The length of the additional data.
* \param output_len The length of the buffer in bytes.
* \param additional Additional data to update. Can be \c NULL, in which
* case the additional data is empty regardless of
* the value of \p add_len.
* \param add_len The length of the additional data
* if \p additional is not \c NULL.
* This must be less than #MBEDTLS_CTR_DRBG_MAX_INPUT
* and less than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT - \c entropy_len
* where \c entropy_len is the entropy length
* configured for the context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or
@ -284,12 +439,14 @@ int mbedtls_ctr_drbg_random_with_add( void *p_rng,
/**
* \brief This function uses CTR_DRBG to generate random data.
*
* \note The function automatically reseeds if the reseed counter is exceeded.
* This function automatically reseeds if the reseed counter is exceeded
* or prediction resistance is enabled.
*
*
* \param p_rng The CTR_DRBG context. This must be a pointer to a
* #mbedtls_ctr_drbg_context structure.
* \param output The buffer to fill.
* \param output_len The length of the buffer.
* \param output_len The length of the buffer in bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or
@ -336,7 +493,7 @@ MBEDTLS_DEPRECATED void mbedtls_ctr_drbg_update(
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR on file error.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on reseed
* failure.
*/
int mbedtls_ctr_drbg_write_seed_file( mbedtls_ctr_drbg_context *ctx, const char *path );
@ -350,8 +507,10 @@ int mbedtls_ctr_drbg_write_seed_file( mbedtls_ctr_drbg_context *ctx, const char
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR on file error.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or
* #MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG on failure.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on
* reseed failure.
* \return #MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG if the existing
* seed file is too large.
*/
int mbedtls_ctr_drbg_update_seed_file( mbedtls_ctr_drbg_context *ctx, const char *path );
#endif /* MBEDTLS_FS_IO */