feedc0de/arduino-esp32
1
0
Fork 0
forked from espressif/arduino-esp32
Code Pull Requests Activity

Update IDF Libs

Browse Source
This commit is contained in:
me-no-dev
2020-06-28 15:38:58 +03:00
parent 7611f483ae
commit 47b34df897
259 changed files with 1671 additions and 836 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
tools/sdk/esp32s2/include/driver/include/driver/adc_common.h
View File

@ -158,7 +158,7 @@ esp_err_t adc1_config_width(adc_bits_width_t width_bit);
* When enabling power for any of these peripherals, ignore input from GPIO36 and GPIO39.
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
*
* @note Call adc1_config_width() before the first time this
* @note Call ``adc1_config_width()`` before the first time this
* function is called.
*
* @note For any given channel, adc1_config_channel_atten(channel)
@ -230,9 +230,9 @@ esp_err_t adc_set_data_width(adc_unit_t adc_unit, adc_bits_width_t width_bit);
* @brief Configure ADC1 to be usable by the ULP
*
* This function reconfigures ADC1 to be controlled by the ULP.
* Effect of this function can be reverted using adc1_get_raw function.
* Effect of this function can be reverted using ``adc1_get_raw()`` function.
*
* Note that adc1_config_channel_atten, adc1_config_width functions need
* Note that adc1_config_channel_atten, ``adc1_config_width()`` functions need
* to be called to configure ADC1 channels, before ADC1 is used by the ULP.
*/
void adc1_ulp_enable(void);

6
tools/sdk/esp32s2/include/driver/include/driver/i2s.h
View File

@ -1,4 +1,4 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
@ -33,6 +33,8 @@
extern "C" {
#endif
#define I2S_PIN_NO_CHANGE (-1) /*!< Use in i2s_pin_config_t for pins which should not be changed */
typedef intr_handle_t i2s_isr_handle_t;
/**
@ -194,7 +196,7 @@ esp_err_t i2s_write_expand(i2s_port_t i2s_num, const void *src, size_t size, siz
*
* @param ticks_to_wait RX buffer wait timeout in RTOS ticks. If this many ticks pass without bytes becoming available in the DMA receive buffer, then the function will return (note that if data is read from the DMA buffer in pieces, the overall operation may still take longer than this timeout.) Pass portMAX_DELAY for no timeout.
*
* @note If the built-in ADC mode is enabled, we should call i2s_adc_start and i2s_adc_stop around the whole reading process,
* @note If the built-in ADC mode is enabled, we should call i2s_adc_enable and i2s_adc_disable around the whole reading process,
* to prevent the data getting corrupted.
*
* @return