feedc0de/arduino-esp32
1
0
Fork 0
forked from espressif/arduino-esp32
Code Pull Requests Activity

Trailing spaces (#3738)

Browse Source 
* fix typo in WiFiMulti

* clean up trailing spaces

* clean up script file used in cleaning

Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
This commit is contained in:
Mark D
2020-11-02 15:11:26 -05:00
committed by GitHub
parent e4b008e712
commit 56a7ae8712
24 changed files with 96 additions and 96 deletions
Download Patch File Download Diff File Expand all files Collapse all files

42
tools/sdk/include/freemodbus/mb.h
View File

@ -1,4 +1,4 @@
/*
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
@ -71,7 +71,7 @@ PR_BEGIN_EXTERN_C
/*! \ingroup modbus
* \brief Use the default Modbus TCP port (502)
*/
#define MB_TCP_PORT_USE_DEFAULT 0
#define MB_TCP_PORT_USE_DEFAULT 0
/* ----------------------- Type definitions ---------------------------------*/
@ -97,7 +97,7 @@ PR_BEGIN_EXTERN_C
* registers should be updated and reading means that the modbus protocol
* stack needs to know the current register values.
*
* \see eMBRegHoldingCB( ), eMBRegCoilsCB( ), eMBRegDiscreteCB( ) and
* \see eMBRegHoldingCB( ), eMBRegCoilsCB( ), eMBRegDiscreteCB( ) and
* eMBRegInputCB( ).
*/
typedef enum
@ -142,7 +142,7 @@ typedef enum
*
* \return If no error occurs the function returns eMBErrorCode::MB_ENOERR.
* The protocol is then in the disabled state and ready for activation
* by calling eMBEnable( ). Otherwise one of the following error codes
* by calling eMBEnable( ). Otherwise one of the following error codes
* is returned:
* - eMBErrorCode::MB_EINVAL If the slave address was not valid. Valid
* slave addresses are in the range 1 - 247.
@ -171,10 +171,10 @@ eMBErrorCode eMBTCPInit( USHORT usTCPPort );
* \brief Release resources used by the protocol stack.
*
* This function disables the Modbus protocol stack and release all
* hardware resources. It must only be called when the protocol stack
* is disabled.
* hardware resources. It must only be called when the protocol stack
* is disabled.
*
* \note Note all ports implement this function. A port which wants to
* \note Note all ports implement this function. A port which wants to
* get an callback must define the macro MB_PORT_HAS_CLOSE to 1.
*
* \return If the resources where released it return eMBErrorCode::MB_ENOERR.
@ -189,8 +189,8 @@ eMBErrorCode eMBClose( void );
* This function enables processing of Modbus frames. Enabling the protocol
* stack is only possible if it is in the disabled state.
*
* \return If the protocol stack is now in the state enabled it returns
* eMBErrorCode::MB_ENOERR. If it was not in the disabled state it
* \return If the protocol stack is now in the state enabled it returns
* eMBErrorCode::MB_ENOERR. If it was not in the disabled state it
* return eMBErrorCode::MB_EILLSTATE.
*/
eMBErrorCode eMBEnable( void );
@ -200,7 +200,7 @@ eMBErrorCode eMBEnable( void );
*
* This function disables processing of Modbus frames.
*
* \return If the protocol stack has been disabled it returns
* \return If the protocol stack has been disabled it returns
* eMBErrorCode::MB_ENOERR. If it was not in the enabled state it returns
* eMBErrorCode::MB_EILLSTATE.
*/
@ -212,10 +212,10 @@ eMBErrorCode eMBDisable( void );
* This function must be called periodically. The timer interval required
* is given by the application dependent Modbus slave timeout. Internally the
* function calls xMBPortEventGet() and waits for an event from the receiver or
* transmitter state machines.
* transmitter state machines.
*
* \return If the protocol stack is not in the enabled state the function
* returns eMBErrorCode::MB_EILLSTATE. Otherwise it returns
* returns eMBErrorCode::MB_EILLSTATE. Otherwise it returns
* eMBErrorCode::MB_ENOERR.
*/
eMBErrorCode eMBPoll( void );
@ -249,7 +249,7 @@ eMBErrorCode eMBSetSlaveID( UCHAR ucSlaveID, BOOL xIsRunning,
* The callback handler supplied is responsible for interpreting the Modbus PDU and
* the creation of an appropriate response. In case of an error it should return
* one of the possible Modbus exceptions which results in a Modbus exception frame
* sent by the protocol stack.
* sent by the protocol stack.
*
* \param ucFunctionCode The Modbus function code for which this handler should
* be registers. Valid function codes are in the range 1 to 127.
@ -262,7 +262,7 @@ eMBErrorCode eMBSetSlaveID( UCHAR ucSlaveID, BOOL xIsRunning,
* case the values in mbconfig.h should be adjusted. If the argument was not
* valid it returns eMBErrorCode::MB_EINVAL.
*/
eMBErrorCode eMBRegisterCB( UCHAR ucFunctionCode,
eMBErrorCode eMBRegisterCB( UCHAR ucFunctionCode,
pxMBFunctionHandler pxHandler );
/* ----------------------- Callback -----------------------------------------*/
@ -300,7 +300,7 @@ eMBErrorCode eMBRegisterCB( UCHAR ucFunctionCode,
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
* Modbus response is sent.
* - eMBErrorCode::MB_ENOREG If the application can not supply values
* for registers within this range. In this case a
* for registers within this range. In this case a
* <b>ILLEGAL DATA ADDRESS</b> exception frame is sent as a response.
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
* currently not available and the application dependent response
@ -324,18 +324,18 @@ eMBErrorCode eMBRegInputCB( UCHAR * pucRegBuffer, USHORT usAddress,
* this buffer.
* \param usAddress The starting address of the register.
* \param usNRegs Number of registers to read or write.
* \param eMode If eMBRegisterMode::MB_REG_WRITE the application register
* \param eMode If eMBRegisterMode::MB_REG_WRITE the application register
* values should be updated from the values in the buffer. For example
* this would be the case when the Modbus master has issued an
* this would be the case when the Modbus master has issued an
* <b>WRITE SINGLE REGISTER</b> command.
* If the value eMBRegisterMode::MB_REG_READ the application should copy
* If the value eMBRegisterMode::MB_REG_READ the application should copy
* the current values into the buffer \c pucRegBuffer.
*
* \return The function must return one of the following error codes:
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
* Modbus response is sent.
* - eMBErrorCode::MB_ENOREG If the application can not supply values
* for registers within this range. In this case a
* for registers within this range. In this case a
* <b>ILLEGAL DATA ADDRESS</b> exception frame is sent as a response.
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
* currently not available and the application dependent response
@ -370,7 +370,7 @@ eMBErrorCode eMBRegHoldingCB( UCHAR * pucRegBuffer, USHORT usAddress,
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
* Modbus response is sent.
* - eMBErrorCode::MB_ENOREG If the application does not map an coils
* within the requested address range. In this case a
* within the requested address range. In this case a
* <b>ILLEGAL DATA ADDRESS</b> is sent as a response.
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
* currently not available and the application dependent response
@ -399,7 +399,7 @@ eMBErrorCode eMBRegCoilsCB( UCHAR * pucRegBuffer, USHORT usAddress,
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
* Modbus response is sent.
* - eMBErrorCode::MB_ENOREG If no such discrete inputs exists.
* In this case a <b>ILLEGAL DATA ADDRESS</b> exception frame is sent
* In this case a <b>ILLEGAL DATA ADDRESS</b> exception frame is sent
* as a response.
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
* currently not available and the application dependent response

2
tools/sdk/include/freemodbus/mbconfig.h
View File

@ -1,4 +1,4 @@
/*
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.

2
tools/sdk/include/freemodbus/mbframe.h
View File

@ -1,4 +1,4 @@
/*
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.

2
tools/sdk/include/freemodbus/mbfunc.h
View File

@ -1,4 +1,4 @@
/*
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.

2
tools/sdk/include/freemodbus/mbport.h
View File

@ -1,4 +1,4 @@
/*
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.

2
tools/sdk/include/freemodbus/mbproto.h
View File

@ -1,4 +1,4 @@
/*
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.

2
tools/sdk/include/freemodbus/mbutils.h
View File

@ -1,4 +1,4 @@
/*
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.