feedc0de/arduino-esp32
1
0
Fork 0
forked from espressif/arduino-esp32
Code Pull Requests Activity

Update IDF and Tools

Browse Source
This commit is contained in:
me-no-dev
2020-10-13 16:52:16 +03:00
parent 8900e8fca9
commit 659e9a51dd
475 changed files with 4511 additions and 1535 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
tools/sdk/esp32s2/include/driver/esp32s2/include/driver/adc.h
View File

@ -44,29 +44,6 @@ esp_err_t adc_arbiter_config(adc_unit_t adc_unit, adc_arbiter_t *config);
/*---------------------------------------------------------------
Digital controller setting
---------------------------------------------------------------*/
/**
* @brief ADC digital controller initialization.
* @return
* - ESP_OK Success
*/
esp_err_t adc_digi_init(void);
/**
* @brief ADC digital controller deinitialization.
* @return
* - ESP_OK Success
*/
esp_err_t adc_digi_deinit(void);
/**
* @brief Setting the digital controller.
*
* @param config Pointer to digital controller paramter. Refer to `adc_digi_config_t`.
*
* @return
* - ESP_OK Success
*/
esp_err_t adc_digi_controller_config(const adc_digi_config_t *config);
/**
* @brief Enable digital controller to trigger the measurement.

80
tools/sdk/esp32s2/include/driver/esp32s2/include/driver/dac.h Normal file
View File

@ -0,0 +1,80 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "driver/dac_common.h"
#ifdef __cplusplus
extern "C" {
#endif
/*---------------------------------------------------------------
Digital controller setting
---------------------------------------------------------------*/
/**
* @brief DAC digital controller initialization.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_init(void);
/**
* @brief DAC digital controller deinitialization.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_deinit(void);
/**
* @brief Setting the DAC digital controller.
*
* @param cfg Pointer to digital controller paramter. See ``dac_digi_config_t``.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t dac_digi_controller_config(const dac_digi_config_t *cfg);
/**
* @brief DAC digital controller start output voltage.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_start(void);
/**
* @brief DAC digital controller stop output voltage.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_stop(void);
/**
* @brief Reset DAC digital controller FIFO.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_fifo_reset(void);
/**
* @brief Reset DAC digital controller.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_reset(void);
#ifdef __cplusplus
}
#endif

186
tools/sdk/esp32s2/include/driver/include/driver/adc_common.h
View File

@ -76,7 +76,7 @@ typedef enum {
/**
* @brief ADC digital controller encode option.
*
* @deprecated The ESP32S2 don't use I2S DMA. Call ``adc_digi_output_format_t`` instead.
* @deprecated The ESP32-S2 doesn't use I2S DMA. Call ``adc_digi_output_format_t`` instead.
*/
typedef enum {
ADC_ENCODE_12BIT, /*!< ADC to DMA data format, , [15:12]-channel [11:0]-12 bits ADC data */
@ -84,6 +84,35 @@ typedef enum {
ADC_ENCODE_MAX,
} adc_i2s_encode_t;
/*---------------------------------------------------------------
Common setting
---------------------------------------------------------------*/
/**
* @brief Enable ADC power
*/
void adc_power_on(void);
/**
* @brief Power off SAR ADC
* This function will force power down for ADC
*/
void adc_power_off(void);
/**
* @brief Initialize ADC pad
* @param adc_unit ADC unit index
* @param channel ADC channel index
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_gpio_init(adc_unit_t adc_unit, adc_channel_t channel);
/*---------------------------------------------------------------
RTC controller setting
---------------------------------------------------------------*/
/**
* @brief Get the GPIO number of a specific ADC1 channel.
*
@ -97,45 +126,58 @@ typedef enum {
esp_err_t adc1_pad_get_io_num(adc1_channel_t channel, gpio_num_t *gpio_num);
/**
* @brief Set the attenuation of a particular channel on ADC1, and configure its associated GPIO pin mux.
*
* The default ADC full-scale voltage is 1.1 V. To read higher voltages (up to the pin maximum voltage,
* usually 3.3 V) requires setting >0 dB signal attenuation for that ADC channel.
*
* When VDD_A is 3.3 V:
*
* - 0 dB attenuation (ADC_ATTEN_DB_0) gives full-scale voltage 1.1 V
* - 2.5 dB attenuation (ADC_ATTEN_DB_2_5) gives full-scale voltage 1.5 V
* - 6 dB attenuation (ADC_ATTEN_DB_6) gives full-scale voltage 2.2 V
* - 11 dB attenuation (ADC_ATTEN_DB_11) gives full-scale voltage 3.9 V (see note below)
*
* @note The full-scale voltage is the voltage corresponding to a maximum reading (depending on ADC1 configured bit width,
* this value in ESP32 is: 4095 for 12-bits, 2047 for 11-bits, 1023 for 10-bits, 511 for 9 bits.
* this value in ESP32S2 is: 8191 for 13-bits.)
*
* @note At 11 dB attenuation the maximum voltage is limited by VDD_A, not the full scale voltage.
*
* @note For ESP32:
* Due to ADC characteristics, most accurate results are obtained within the following approximate voltage ranges:
*
* - 0 dB attenuation (ADC_ATTEN_DB_0) between 100 and 950 mV
* - 2.5 dB attenuation (ADC_ATTEN_DB_2_5) between 100 and 1250 mV
* - 6 dB attenuation (ADC_ATTEN_DB_6) between 150 to 1750 mV
* - 11 dB attenuation (ADC_ATTEN_DB_11) between 150 to 2450 mV
*
* For maximum accuracy, use the ADC calibration APIs and measure voltages within these recommended ranges.
*
* @note For any given channel, this function must be called before the first time ``adc1_get_raw()`` is called for that channel.
*
* @note This function can be called multiple times to configure multiple
* ADC channels simultaneously. ``adc1_get_raw()`` can then be called for any configured channel.
*
* @param channel ADC1 channel to configure
* @param atten Attenuation level
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
* @brief Set the attenuation of a particular channel on ADC1, and configure its associated GPIO pin mux.
*
* The default ADC full-scale voltage is 1.1 V. To read higher voltages (up to the pin maximum voltage,
* usually 3.3 V) requires setting >0 dB signal attenuation for that ADC channel.
*
* When the analog voltage supply (VDDA) is 3.3 V:
*
* - 0 dB attenuation (ADC_ATTEN_DB_0) gives full-scale voltage 1.1 V
* - 2.5 dB attenuation (ADC_ATTEN_DB_2_5) gives full-scale voltage 1.5 V
* - 6 dB attenuation (ADC_ATTEN_DB_6) gives full-scale voltage 2.2 V
* - 11 dB attenuation (ADC_ATTEN_DB_11) gives full-scale voltage 3.9 V (see note below)
*
* Due to ADC characteristics, most accurate results are obtained within the following approximate voltage ranges:
*
* +----------+------------+--------------------------+
* | SoC | attenuation| suggested range (mV) |
* +==========+============+==========================+
* | | 0 | 100 ~ 950 |
* | +------------+--------------------------+
* | | 2.5 | 100 ~ 1250 |
* | ESP32 +------------+--------------------------+
* | | 6 | 150 ~ 1750 |
* | +------------+--------------------------+
* | | 11 | 150 ~ 2450 |
* +----------+------------+--------------------------+
* | | 0 | 100 ~ 800 |
* | +------------+--------------------------+
* | | 2.5 | 100 ~ 1100 |
* | ESP32-S2 +------------+--------------------------+
* | | 6 | 150 ~ 1350 |
* | +------------+--------------------------+
* | | 11 | 150 ~ 2600 |
* +----------+------------+--------------------------+
*
* For maximum accuracy, use the ADC calibration APIs and measure voltages within these recommended ranges.
* @note The full-scale voltage is the voltage corresponding to a maximum reading (depending on ADC1 configured bit width,
* this value in ESP32 is 4095 for 12-bits, 2047 for 11-bits, 1023 for 10-bits, 511 for 9 bits.
* this value in ESP32-S2 is 8191 for 13-bits.)
*
* @note At 11 dB attenuation the maximum voltage is limited by VDDA, not the full scale voltage.
*
* @note For any given channel, this function must be called before the first time ``adc1_get_raw()`` is called for that channel.
*
* @note This function can be called multiple times to configure multiple
* ADC channels simultaneously. You may call ``adc1_get_raw()`` only after configuring a channel.
*
* @param channel ADC1 channel to configure
* @param atten Attenuation level
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc1_config_channel_atten(adc1_channel_t channel, adc_atten_t atten);
@ -173,27 +215,6 @@ esp_err_t adc1_config_width(adc_bits_width_t width_bit);
*/
int adc1_get_raw(adc1_channel_t channel);
/**
* @brief Enable ADC power
*/
void adc_power_on(void);
/**
* @brief Power off SAR ADC
* This function will force power down for ADC
*/
void adc_power_off(void);
/**
* @brief Initialize ADC pad
* @param adc_unit ADC unit index
* @param channel ADC channel index
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_gpio_init(adc_unit_t adc_unit, adc_channel_t channel);
/**
* @brief Set ADC data invert
* @param adc_unit ADC unit index
@ -215,10 +236,10 @@ esp_err_t adc_set_clk_div(uint8_t clk_div);
/**
* @brief Configure ADC capture width.
*
* @note For ESP32S2, only support ``ADC_WIDTH_BIT_13``.
* @note ESP32-S2 only supports ``ADC_WIDTH_BIT_13``.
*
* @param adc_unit ADC unit index
* @param width_bit Bit capture width for ADC unit. For ESP32S2, only support ``ADC_WIDTH_BIT_13``.
* @param width_bit Bit capture width for ADC unit. ESP32-S2 only supports ``ADC_WIDTH_BIT_13``.
*
* @return
* - ESP_OK success
@ -256,7 +277,7 @@ esp_err_t adc2_pad_get_io_num(adc2_channel_t channel, gpio_num_t *gpio_num);
* The default ADC full-scale voltage is 1.1 V. To read higher voltages (up to the pin maximum voltage,
* usually 3.3 V) requires setting >0 dB signal attenuation for that ADC channel.
*
* When VDD_A is 3.3 V:
* When the analog voltage supply (VDDA) is 3.3 V:
*
* - 0 dB attenuation (ADC_ATTEN_0db) gives full-scale voltage 1.1 V
* - 2.5 dB attenuation (ADC_ATTEN_2_5db) gives full-scale voltage 1.5 V
@ -269,10 +290,10 @@ esp_err_t adc2_pad_get_io_num(adc2_channel_t channel, gpio_num_t *gpio_num);
*
* @note The full-scale voltage is the voltage corresponding to a maximum reading
* (depending on ADC2 configured bit width,
* this value of ESP32 is: 4095 for 12-bits, 2047 for 11-bits, 1023 for 10-bits, 511 for 9 bits.
* this value of ESP32S2 is: 8191 for 13-bits.)
* this value for ESP32 is: 4095 for 12-bits, 2047 for 11-bits, 1023 for 10-bits, 511 for 9 bits.
* this value for ESP32-S2 is: 8191 for 13-bits.)
*
* @note At 11 dB attenuation the maximum voltage is limited by VDD_A, not the full scale voltage.
* @note At 11 dB attenuation the maximum voltage is limited by VDDA, not the full scale voltage.
*
* @param channel ADC2 channel to configure
* @param atten Attenuation level
@ -297,12 +318,12 @@ esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
* must be called before the first time this function is called. If Wi-Fi is started via ``esp_wifi_start()``, this
* function will always fail with ``ESP_ERR_TIMEOUT``.
*
* @note ESP32S2:
* @note ESP32-S2:
* ADC2 support hardware arbiter. The arbiter is to improve the use efficiency of ADC2. After the control right is robbed by the high priority,
* the low priority controller will read the invalid ADC2 data. Default priority: Wi-Fi > RTC > Digital;
*
* @param channel ADC2 channel to read
* @param width_bit Bit capture width for ADC2. For ESP32S2, only support ``ADC_WIDTH_BIT_13``.
* @param width_bit Bit capture width for ADC2. ESP32-S2 only supports ``ADC_WIDTH_BIT_13``.
* @param raw_out the variable to hold the output data.
*
* @return
@ -345,6 +366,33 @@ esp_err_t adc_vref_to_gpio(adc_unit_t adc_unit, gpio_num_t gpio);
* - ESP_ERR_INVALID_ARG: Unsupported GPIO
*/
esp_err_t adc2_vref_to_gpio(gpio_num_t gpio) __attribute__((deprecated));
/*---------------------------------------------------------------
Digital controller setting
---------------------------------------------------------------*/
/**
* @brief ADC digital controller initialization.
* @return
* - ESP_OK Success
*/
esp_err_t adc_digi_init(void);
/**
* @brief ADC digital controller deinitialization.
* @return
* - ESP_OK Success
*/
esp_err_t adc_digi_deinit(void);
/**
* @brief Setting the digital controller.
*
* @param config Pointer to digital controller paramter. Refer to `adc_digi_config_t`.
*
* @return
* - ESP_OK Success
*/
esp_err_t adc_digi_controller_config(const adc_digi_config_t *config);
#ifdef __cplusplus
}

17
tools/sdk/esp32s2/include/driver/include/driver/dac.h → tools/sdk/esp32s2/include/driver/include/driver/dac_common.h
View File

@ -67,22 +67,6 @@ esp_err_t dac_output_enable(dac_channel_t channel);
*/
esp_err_t dac_output_disable(dac_channel_t channel);
/**
* @brief Enable DAC output data from I2S
*
* @return
* - ESP_OK success
*/
esp_err_t dac_i2s_enable(void);
/**
* @brief Disable DAC output data from I2S
*
* @return
* - ESP_OK success
*/
esp_err_t dac_i2s_disable(void);
/**
* @brief Enable cosine wave generator output.
*
@ -105,6 +89,7 @@ esp_err_t dac_cw_generator_disable(void);
* @param cw Configuration.
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG The parameter is NULL.
*/
esp_err_t dac_cw_generator_config(dac_cw_config_t *cw);

6
tools/sdk/esp32s2/include/driver/include/driver/twai.h
View File

@ -166,9 +166,9 @@ esp_err_t twai_driver_uninstall(void);
*
* This function starts the TWAI driver, putting the TWAI driver into the running
* state. This allows the TWAI driver to participate in TWAI bus activities such
* as transmitting/receiving messages. The RX queue is reset in this function,
* clearing any unread messages. This function can only be called when the TWAI
* driver is in the stopped state.
* as transmitting/receiving messages. The TX and RX queue are reset in this function,
* clearing any messages that are unread or pending transmission. This function
* can only be called when the TWAI driver is in the stopped state.
*
* @return
* - ESP_OK: TWAI driver is now running