forked from espressif/arduino-esp32
IDF master c69f0ec32 (#5449)
esp-dsp: master f4d7d6e esp-face: master 420fc7e esp-rainmaker: f1b82c7 esp32-camera: master 6a9497b esp_littlefs: master b58f00c
This commit is contained in:
Me No Dev
GitHub
@ -36,6 +36,7 @@
|
||||
//--------------------------------------------------------------------+
|
||||
// Common Definitions
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
// DFU Protocol
|
||||
typedef enum
|
||||
{
|
||||
@ -77,28 +78,28 @@ typedef enum {
|
||||
|
||||
// DFU Status
|
||||
typedef enum {
|
||||
DFU_STATUS_OK = 0x00,
|
||||
DFU_STATUS_ERRTARGET = 0x01,
|
||||
DFU_STATUS_ERRFILE = 0x02,
|
||||
DFU_STATUS_ERRWRITE = 0x03,
|
||||
DFU_STATUS_ERRERASE = 0x04,
|
||||
DFU_STATUS_ERRCHECK_ERASED = 0x05,
|
||||
DFU_STATUS_ERRPROG = 0x06,
|
||||
DFU_STATUS_ERRVERIFY = 0x07,
|
||||
DFU_STATUS_ERRADDRESS = 0x08,
|
||||
DFU_STATUS_ERRNOTDONE = 0x09,
|
||||
DFU_STATUS_ERRFIRMWARE = 0x0A,
|
||||
DFU_STATUS_ERRVENDOR = 0x0B,
|
||||
DFU_STATUS_ERRUSBR = 0x0C,
|
||||
DFU_STATUS_ERRPOR = 0x0D,
|
||||
DFU_STATUS_ERRUNKNOWN = 0x0E,
|
||||
DFU_STATUS_ERRSTALLEDPKT = 0x0F,
|
||||
} dfu_device_status_t;
|
||||
DFU_STATUS_OK = 0x00,
|
||||
DFU_STATUS_ERR_TARGET = 0x01,
|
||||
DFU_STATUS_ERR_FILE = 0x02,
|
||||
DFU_STATUS_ERR_WRITE = 0x03,
|
||||
DFU_STATUS_ERR_ERASE = 0x04,
|
||||
DFU_STATUS_ERR_CHECK_ERASED = 0x05,
|
||||
DFU_STATUS_ERR_PROG = 0x06,
|
||||
DFU_STATUS_ERR_VERIFY = 0x07,
|
||||
DFU_STATUS_ERR_ADDRESS = 0x08,
|
||||
DFU_STATUS_ERR_NOTDONE = 0x09,
|
||||
DFU_STATUS_ERR_FIRMWARE = 0x0A,
|
||||
DFU_STATUS_ERR_VENDOR = 0x0B,
|
||||
DFU_STATUS_ERR_USBR = 0x0C,
|
||||
DFU_STATUS_ERR_POR = 0x0D,
|
||||
DFU_STATUS_ERR_UNKNOWN = 0x0E,
|
||||
DFU_STATUS_ERR_STALLEDPKT = 0x0F,
|
||||
} dfu_status_t;
|
||||
|
||||
#define DFU_FUNC_ATTR_CAN_DOWNLOAD_BITMASK (1 << 0)
|
||||
#define DFU_FUNC_ATTR_CAN_UPLOAD_BITMASK (1 << 1)
|
||||
#define DFU_FUNC_ATTR_MANIFESTATION_TOLERANT_BITMASK (1 << 2)
|
||||
#define DFU_FUNC_ATTR_WILL_DETACH_BITMASK (1 << 3)
|
||||
#define DFU_ATTR_CAN_DOWNLOAD (1u << 0)
|
||||
#define DFU_ATTR_CAN_UPLOAD (1u << 1)
|
||||
#define DFU_ATTR_MANIFESTATION_TOLERANT (1u << 2)
|
||||
#define DFU_ATTR_WILL_DETACH (1u << 3)
|
||||
|
||||
// DFU Status Request Payload
|
||||
typedef struct TU_ATTR_PACKED
|
||||
@ -107,9 +108,9 @@ typedef struct TU_ATTR_PACKED
|
||||
uint8_t bwPollTimeout[3];
|
||||
uint8_t bState;
|
||||
uint8_t iString;
|
||||
} dfu_status_req_payload_t;
|
||||
} dfu_status_response_t;
|
||||
|
||||
TU_VERIFY_STATIC( sizeof(dfu_status_req_payload_t) == 6, "size is not correct");
|
||||
TU_VERIFY_STATIC( sizeof(dfu_status_response_t) == 6, "size is not correct");
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
|
||||
@ -33,38 +33,54 @@
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Class Driver Default Configure & Validation
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
#if !defined(CFG_TUD_DFU_XFER_BUFSIZE)
|
||||
#error "CFG_TUD_DFU_XFER_BUFSIZE must be defined, it has to be set to the buffer size used in TUD_DFU_DESCRIPTOR"
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Application API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
// Must be called when the application is done with flashing started by
|
||||
// tud_dfu_download_cb() and tud_dfu_manifest_cb().
|
||||
// status is DFU_STATUS_OK if successful, any other error status will cause state to enter dfuError
|
||||
void tud_dfu_finish_flashing(uint8_t status);
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Application Callback API (weak is optional)
|
||||
//--------------------------------------------------------------------+
|
||||
// Invoked during DFU_MANIFEST_SYNC get status request to check if firmware
|
||||
// is valid
|
||||
bool tud_dfu_firmware_valid_check_cb(void);
|
||||
|
||||
// Invoked when a DFU_DNLOAD request is received
|
||||
// This callback takes the wBlockNum chunk of length length and provides it
|
||||
// to the application at the data pointer. This data is only valid for this
|
||||
// call, so the app must use it not or copy it.
|
||||
void tud_dfu_req_dnload_data_cb(uint16_t wBlockNum, uint8_t* data, uint16_t length);
|
||||
// Note: alt is used as the partition number, in order to support multiple partitions like FLASH, EEPROM, etc.
|
||||
|
||||
// Must be called when the application is done using the last block of data
|
||||
// provided by tud_dfu_req_dnload_data_cb
|
||||
void tud_dfu_dnload_complete(void);
|
||||
// Invoked right before tud_dfu_download_cb() (state=DFU_DNBUSY) or tud_dfu_manifest_cb() (state=DFU_MANIFEST)
|
||||
// Application return timeout in milliseconds (bwPollTimeout) for the next download/manifest operation.
|
||||
// During this period, USB host won't try to communicate with us.
|
||||
uint32_t tud_dfu_get_timeout_cb(uint8_t alt, uint8_t state);
|
||||
|
||||
// Invoked during the last DFU_DNLOAD request, signifying that the host believes
|
||||
// it is done transmitting data.
|
||||
// Return true if the application agrees there is no more data
|
||||
// Return false if the device disagrees, which will stall the pipe, and the Host
|
||||
// should initiate a recovery procedure
|
||||
bool tud_dfu_device_data_done_check_cb(void);
|
||||
// Invoked when received DFU_DNLOAD (wLength>0) following by DFU_GETSTATUS (state=DFU_DNBUSY) requests
|
||||
// This callback could be returned before flashing op is complete (async).
|
||||
// Once finished flashing, application must call tud_dfu_finish_flashing()
|
||||
void tud_dfu_download_cb (uint8_t alt, uint16_t block_num, uint8_t const *data, uint16_t length);
|
||||
|
||||
// Invoked when download process is complete, received DFU_DNLOAD (wLength=0) following by DFU_GETSTATUS (state=Manifest)
|
||||
// Application can do checksum, or actual flashing if buffered entire image previously.
|
||||
// Once finished flashing, application must call tud_dfu_finish_flashing()
|
||||
void tud_dfu_manifest_cb(uint8_t alt);
|
||||
|
||||
// Invoked when received DFU_UPLOAD request
|
||||
// Application must populate data with up to length bytes and
|
||||
// Return the number of written bytes
|
||||
TU_ATTR_WEAK uint16_t tud_dfu_upload_cb(uint8_t alt, uint16_t block_num, uint8_t* data, uint16_t length);
|
||||
|
||||
// Invoked when a DFU_DETACH request is received
|
||||
TU_ATTR_WEAK void tud_dfu_detach_cb(void);
|
||||
|
||||
// Invoked when the Host has terminated a download or upload transfer
|
||||
TU_ATTR_WEAK void tud_dfu_abort_cb(void);
|
||||
|
||||
// Invoked when a DFU_UPLOAD request is received
|
||||
// This callback must populate data with up to length bytes
|
||||
// Return the number of bytes to write
|
||||
uint16_t tud_dfu_req_upload_data_cb(uint16_t block_num, uint8_t* data, uint16_t length);
|
||||
TU_ATTR_WEAK void tud_dfu_abort_cb(uint8_t alt);
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Internal Class Driver API
|
||||
|
||||
@ -449,7 +449,7 @@ typedef struct TU_ATTR_PACKED
|
||||
/*------------------------------------------------------------------*/
|
||||
/* Types
|
||||
*------------------------------------------------------------------*/
|
||||
typedef struct TU_ATTR_PACKED{
|
||||
typedef struct TU_ATTR_PACKED {
|
||||
union {
|
||||
struct TU_ATTR_PACKED {
|
||||
uint8_t recipient : 5; ///< Recipient type tusb_request_recipient_t.
|
||||
|
||||
@ -30,11 +30,24 @@
|
||||
#include "common/tusb_common.h"
|
||||
#include "osal/osal.h"
|
||||
#include "common/tusb_fifo.h"
|
||||
#include "dcd_attr.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Configuration
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
#ifndef CFG_TUD_ENDPPOINT_MAX
|
||||
#define CFG_TUD_ENDPPOINT_MAX DCD_ATTR_ENDPOINT_MAX
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// MACRO CONSTANT TYPEDEF PROTYPES
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
typedef enum
|
||||
{
|
||||
DCD_EVENT_INVALID = 0,
|
||||
|
||||
@ -0,0 +1,160 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef TUSB_DCD_ATTR_H_
|
||||
#define TUSB_DCD_ATTR_H_
|
||||
|
||||
#include "tusb_option.h"
|
||||
|
||||
// Attribute includes
|
||||
// - ENDPOINT_MAX: max (logical) number of endpoint
|
||||
// - ENDPOINT_EXCLUSIVE_NUMBER: endpoint number with different direction IN and OUT aren't allowed,
|
||||
// e.g EP1 OUT & EP1 IN cannot exist together
|
||||
// - PORT_HIGHSPEED: mask to indicate which port support highspeed mode, bit0 for port0 and so on.
|
||||
|
||||
//------------- NXP -------------//
|
||||
#if TU_CHECK_MCU(LPC11UXX) || TU_CHECK_MCU(LPC13XX) || TU_CHECK_MCU(LPC15XX)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 5
|
||||
|
||||
#elif TU_CHECK_MCU(LPC175X_6X) || TU_CHECK_MCU(LPC177X_8X) || TU_CHECK_MCU(LPC40XX)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 16
|
||||
|
||||
#elif TU_CHECK_MCU(LPC18XX) || TU_CHECK_MCU(LPC43XX)
|
||||
// TODO USB0 has 6, USB1 has 4
|
||||
#define DCD_ATTR_ENDPOINT_MAX 6
|
||||
|
||||
#elif TU_CHECK_MCU(LPC51UXX)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 5
|
||||
|
||||
#elif TU_CHECK_MCU(LPC54XXX)
|
||||
// TODO USB0 has 5, USB1 has 6
|
||||
#define DCD_ATTR_ENDPOINT_MAX 6
|
||||
|
||||
#elif TU_CHECK_MCU(LPC55XX)
|
||||
// TODO USB0 has 5, USB1 has 6
|
||||
#define DCD_ATTR_ENDPOINT_MAX 6
|
||||
|
||||
#elif TU_CHECK_MCU(MIMXRT10XX)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 8
|
||||
|
||||
#elif TU_CHECK_MCU(MKL25ZXX)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 16
|
||||
|
||||
//------------- Nordic -------------//
|
||||
#elif TU_CHECK_MCU(NRF5X)
|
||||
// 8 CBI + 1 ISO
|
||||
#define DCD_ATTR_ENDPOINT_MAX 9
|
||||
|
||||
//------------- Microchip -------------//
|
||||
#elif TU_CHECK_MCU(SAMD21) || TU_CHECK_MCU(SAMD51) || TU_CHECK_MCU(SAME5X) || \
|
||||
TU_CHECK_MCU(SAMD11) || TU_CHECK_MCU(SAML21) || TU_CHECK_MCU(SAML22)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 8
|
||||
|
||||
#elif TU_CHECK_MCU(SAMG)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 6
|
||||
#define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
|
||||
|
||||
#elif TU_CHECK_MCU(SAMX7X)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 10
|
||||
#define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
|
||||
|
||||
//------------- ST -------------//
|
||||
#elif TU_CHECK_MCU(STM32F0) || TU_CHECK_MCU(STM32F1) || TU_CHECK_MCU(STM32F3) || \
|
||||
TU_CHECK_MCU(STM32L0) || TU_CHECK_MCU(STM32L1) || TU_CHECK_MCU(STM32L4)
|
||||
// F1: F102, F103
|
||||
// L4: L4x2, L4x3
|
||||
#define DCD_ATTR_ENDPOINT_MAX 8
|
||||
|
||||
#elif TU_CHECK_MCU(STM32F2) || TU_CHECK_MCU(STM32F4) || TU_CHECK_MCU(STM32F3)
|
||||
// F1: F105, F107 only has 4
|
||||
// L4: L4x5, L4x6 has 6
|
||||
// For most mcu, FS has 4, HS has 6
|
||||
#define DCD_ATTR_ENDPOINT_MAX 6
|
||||
|
||||
#elif TU_CHECK_MCU(STM32F7)
|
||||
// FS has 6, HS has 9
|
||||
#define DCD_ATTR_ENDPOINT_MAX 9
|
||||
|
||||
#elif TU_CHECK_MCU(STM32H7)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 9
|
||||
|
||||
//------------- Sony -------------//
|
||||
#elif TU_CHECK_MCU(CXD56)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 7
|
||||
#define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
|
||||
|
||||
//------------- TI -------------//
|
||||
#elif TU_CHECK_MCU(MSP430x5xx)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 8
|
||||
|
||||
//------------- ValentyUSB -------------//
|
||||
#elif TU_CHECK_MCU(VALENTYUSB_EPTRI)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 16
|
||||
|
||||
//------------- Nuvoton -------------//
|
||||
#elif TU_CHECK_MCU(NUC121) || TU_CHECK_MCU(NUC126)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 8
|
||||
|
||||
#elif TU_CHECK_MCU(NUC120)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 6
|
||||
|
||||
#elif TU_CHECK_MCU(NUC505)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 12
|
||||
|
||||
//------------- Espressif -------------//
|
||||
#elif TU_CHECK_MCU(ESP32S2) || TU_CHECK_MCU(ESP32S3)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 6
|
||||
|
||||
//------------- Dialog -------------//
|
||||
#elif TU_CHECK_MCU(DA1469X)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 4
|
||||
|
||||
//------------- Raspberry Pi -------------//
|
||||
#elif TU_CHECK_MCU(RP2040)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 16
|
||||
|
||||
//------------- Silabs -------------//
|
||||
#elif TU_CHECK_MCU(EFM32GG) || TU_CHECK_MCU(EFM32GG11) || TU_CHECK_MCU(EFM32GG12)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 7
|
||||
|
||||
//------------- Renesas -------------//
|
||||
#elif TU_CHECK_MCU(RX63X) || TU_CHECK_MCU(RX65X)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 10
|
||||
|
||||
//#elif TU_CHECK_MCU(MM32F327X)
|
||||
// #define DCD_ATTR_ENDPOINT_MAX not knwon yet
|
||||
|
||||
#else
|
||||
#warning "DCD_ATTR_ENDPOINT_MAX is not defined for this MCU, default to 8"
|
||||
#define DCD_ATTR_ENDPOINT_MAX 8
|
||||
#endif
|
||||
|
||||
// Default to fullspeed if not defined
|
||||
//#ifndef PORT_HIGHSPEED
|
||||
// #define DCD_ATTR_PORT_HIGHSPEED 0x00
|
||||
//#endif
|
||||
|
||||
#endif
|
||||
@ -24,18 +24,15 @@
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
/** \ingroup group_usbd
|
||||
* @{ */
|
||||
|
||||
#ifndef _TUSB_USBD_H_
|
||||
#define _TUSB_USBD_H_
|
||||
|
||||
#include "common/tusb_common.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "common/tusb_common.h"
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Application API
|
||||
//--------------------------------------------------------------------+
|
||||
@ -236,7 +233,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
|
||||
// Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
|
||||
#define TUD_HID_DESCRIPTOR(_itfnum, _stridx, _boot_protocol, _report_desc_len, _epin, _epsize, _ep_interval) \
|
||||
/* Interface */\
|
||||
9, TUSB_DESC_INTERFACE, _itfnum, 0, 1, TUSB_CLASS_HID, (uint8_t)((_boot_protocol) ? HID_SUBCLASS_BOOT : 0), _boot_protocol, _stridx,\
|
||||
9, TUSB_DESC_INTERFACE, _itfnum, 0, 1, TUSB_CLASS_HID, (uint8_t)((_boot_protocol) ? (uint8_t)HID_SUBCLASS_BOOT : 0), _boot_protocol, _stridx,\
|
||||
/* HID descriptor */\
|
||||
9, HID_DESC_TYPE_HID, U16_TO_U8S_LE(0x0111), 0, 1, HID_DESC_TYPE_REPORT, U16_TO_U8S_LE(_report_desc_len),\
|
||||
/* Endpoint In */\
|
||||
@ -249,7 +246,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
|
||||
// Interface number, string index, protocol, report descriptor len, EP OUT & IN address, size & polling interval
|
||||
#define TUD_HID_INOUT_DESCRIPTOR(_itfnum, _stridx, _boot_protocol, _report_desc_len, _epout, _epin, _epsize, _ep_interval) \
|
||||
/* Interface */\
|
||||
9, TUSB_DESC_INTERFACE, _itfnum, 0, 2, TUSB_CLASS_HID, (uint8_t)((_boot_protocol) ? HID_SUBCLASS_BOOT : 0), _boot_protocol, _stridx,\
|
||||
9, TUSB_DESC_INTERFACE, _itfnum, 0, 2, TUSB_CLASS_HID, (uint8_t)((_boot_protocol) ? (uint8_t)HID_SUBCLASS_BOOT : 0), _boot_protocol, _stridx,\
|
||||
/* HID descriptor */\
|
||||
9, HID_DESC_TYPE_HID, U16_TO_U8S_LE(0x0111), 0, 1, HID_DESC_TYPE_REPORT, U16_TO_U8S_LE(_report_desc_len),\
|
||||
/* Endpoint Out */\
|
||||
@ -605,17 +602,51 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
|
||||
/* Function */ \
|
||||
9, DFU_DESC_FUNCTIONAL, _attr, U16_TO_U8S_LE(_timeout), U16_TO_U8S_LE(_xfer_size), U16_TO_U8S_LE(0x0101)
|
||||
|
||||
// Length of template descriptr: 18 bytes
|
||||
#define TUD_DFU_MODE_DESC_LEN (9 + 9)
|
||||
// Length of template descriptor: 9 bytes + number of alternatives * 9
|
||||
#define TUD_DFU_DESC_LEN(_alt_count) (9 + (_alt_count) * 9)
|
||||
|
||||
// DFU runtime descriptor
|
||||
// Interface number, string index, attributes, detach timeout, transfer size
|
||||
#define TUD_DFU_MODE_DESCRIPTOR(_itfnum, _stridx, _attr, _timeout, _xfer_size) \
|
||||
/* Interface */ \
|
||||
9, TUSB_DESC_INTERFACE, _itfnum, 0, 0, TUD_DFU_APP_CLASS, TUD_DFU_APP_SUBCLASS, DFU_PROTOCOL_DFU, _stridx, \
|
||||
// Interface number, Alternate count, starting string index, attributes, detach timeout, transfer size
|
||||
// Note: Alternate count must be numberic or macro, string index is increased by one for each Alt interface
|
||||
#define TUD_DFU_DESCRIPTOR(_itfnum, _alt_count, _stridx, _attr, _timeout, _xfer_size) \
|
||||
TU_XSTRCAT(_TUD_DFU_ALT_,_alt_count)(_itfnum, 0, _stridx), \
|
||||
/* Function */ \
|
||||
9, DFU_DESC_FUNCTIONAL, _attr, U16_TO_U8S_LE(_timeout), U16_TO_U8S_LE(_xfer_size), U16_TO_U8S_LE(0x0101)
|
||||
|
||||
#define _TUD_DFU_ALT(_itfnum, _alt, _stridx) \
|
||||
/* Interface */ \
|
||||
9, TUSB_DESC_INTERFACE, _itfnum, _alt, 0, TUD_DFU_APP_CLASS, TUD_DFU_APP_SUBCLASS, DFU_PROTOCOL_DFU, _stridx
|
||||
|
||||
#define _TUD_DFU_ALT_1(_itfnum, _alt_count, _stridx) \
|
||||
_TUD_DFU_ALT(_itfnum, _alt_count, _stridx)
|
||||
|
||||
#define _TUD_DFU_ALT_2(_itfnum, _alt_count, _stridx) \
|
||||
_TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \
|
||||
_TUD_DFU_ALT_1(_itfnum, _alt_count+1, _stridx+1)
|
||||
|
||||
#define _TUD_DFU_ALT_3(_itfnum, _alt_count, _stridx) \
|
||||
_TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \
|
||||
_TUD_DFU_ALT_2(_itfnum, _alt_count+1, _stridx+1)
|
||||
|
||||
#define _TUD_DFU_ALT_4(_itfnum, _alt_count, _stridx) \
|
||||
_TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \
|
||||
_TUD_DFU_ALT_3(_itfnum, _alt_count+1, _stridx+1)
|
||||
|
||||
#define _TUD_DFU_ALT_5(_itfnum, _alt_count, _stridx) \
|
||||
_TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \
|
||||
_TUD_DFU_ALT_4(_itfnum, _alt_count+1, _stridx+1)
|
||||
|
||||
#define _TUD_DFU_ALT_6(_itfnum, _alt_count, _stridx) \
|
||||
_TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \
|
||||
_TUD_DFU_ALT_5(_itfnum, _alt_count+1, _stridx+1)
|
||||
|
||||
#define _TUD_DFU_ALT_7(_itfnum, _alt_count, _stridx) \
|
||||
_TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \
|
||||
_TUD_DFU_ALT_6(_itfnum, _alt_count+1, _stridx+1)
|
||||
|
||||
#define _TUD_DFU_ALT_8(_itfnum, _alt_count, _stridx) \
|
||||
_TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \
|
||||
_TUD_DFU_ALT_7(_itfnum, _alt_count+1, _stridx+1)
|
||||
|
||||
|
||||
//------------- CDC-ECM -------------//
|
||||
|
||||
|
||||
@ -96,7 +96,7 @@
|
||||
#include "class/dfu/dfu_rt_device.h"
|
||||
#endif
|
||||
|
||||
#if CFG_TUD_DFU_MODE
|
||||
#if CFG_TUD_DFU
|
||||
#include "class/dfu/dfu_device.h"
|
||||
#endif
|
||||
|
||||
|
||||
@ -32,9 +32,11 @@
|
||||
#define TUSB_VERSION_REVISION 1
|
||||
#define TUSB_VERSION_STRING TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION)
|
||||
|
||||
/** \defgroup group_mcu Supported MCU
|
||||
* \ref CFG_TUSB_MCU must be defined to one of these
|
||||
* @{ */
|
||||
//--------------------------------------------------------------------+
|
||||
// Supported MCUs
|
||||
// CFG_TUSB_MCU must be defined to one of following value
|
||||
//--------------------------------------------------------------------+
|
||||
#define TU_CHECK_MCU(_m) (CFG_TUSB_MCU == OPT_MCU_##_m)
|
||||
|
||||
#define OPT_MCU_NONE 0
|
||||
|
||||
@ -62,6 +64,7 @@
|
||||
#define OPT_MCU_SAMD11 204 ///< MicroChip SAMD11
|
||||
#define OPT_MCU_SAML22 205 ///< MicroChip SAML22
|
||||
#define OPT_MCU_SAML21 206 ///< MicroChip SAML21
|
||||
#define OPT_MCU_SAMX7X 207 ///< MicroChip SAME70, S70, V70, V71 family
|
||||
|
||||
// STM32
|
||||
#define OPT_MCU_STM32F0 300 ///< ST STM32F0
|
||||
@ -118,18 +121,16 @@
|
||||
// Mind Motion
|
||||
#define OPT_MCU_MM32F327X 1500 ///< Mind Motion MM32F327
|
||||
|
||||
/** @} */
|
||||
//--------------------------------------------------------------------+
|
||||
// Supported OS
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
/** \defgroup group_supported_os Supported RTOS
|
||||
* \ref CFG_TUSB_OS must be defined to one of these
|
||||
* @{ */
|
||||
#define OPT_OS_NONE 1 ///< No RTOS
|
||||
#define OPT_OS_FREERTOS 2 ///< FreeRTOS
|
||||
#define OPT_OS_MYNEWT 3 ///< Mynewt OS
|
||||
#define OPT_OS_CUSTOM 4 ///< Custom OS is implemented by application
|
||||
#define OPT_OS_PICO 5 ///< Raspberry Pi Pico SDK
|
||||
#define OPT_OS_RTTHREAD 6 ///< RT-Thread
|
||||
/** @} */
|
||||
|
||||
// Allow to use command line to change the config name/location
|
||||
#ifdef CFG_TUSB_CONFIG_FILE
|
||||
@ -138,10 +139,6 @@
|
||||
#include "tusb_config.h"
|
||||
#endif
|
||||
|
||||
/** \addtogroup group_configuration
|
||||
* @{ */
|
||||
|
||||
|
||||
//--------------------------------------------------------------------
|
||||
// RootHub Mode Configuration
|
||||
// CFG_TUSB_RHPORTx_MODE contains operation mode and speed for that port
|
||||
@ -249,12 +246,8 @@
|
||||
#define CFG_TUD_DFU_RUNTIME 0
|
||||
#endif
|
||||
|
||||
#ifndef CFG_TUD_DFU_MODE
|
||||
#define CFG_TUD_DFU_MODE 0
|
||||
#endif
|
||||
|
||||
#ifndef CFG_TUD_DFU_TRANSFER_BUFFER_SIZE
|
||||
#define CFG_TUD_DFU_TRANSFER_BUFFER_SIZE 64
|
||||
#ifndef CFG_TUD_DFU
|
||||
#define CFG_TUD_DFU 0
|
||||
#endif
|
||||
|
||||
#ifndef CFG_TUD_NET
|
||||
@ -276,7 +269,7 @@
|
||||
|
||||
//------------- HUB CLASS -------------//
|
||||
#if CFG_TUH_HUB && (CFG_TUSB_HOST_DEVICE_MAX == 1)
|
||||
#error there is no benefit enable hub with max device is 1. Please disable hub or increase CFG_TUSB_HOST_DEVICE_MAX
|
||||
#error There is no benefit enable hub with max device is 1. Please disable hub or increase CFG_TUSB_HOST_DEVICE_MAX
|
||||
#endif
|
||||
|
||||
#ifndef CFG_TUH_ENUMERATION_BUFSIZE
|
||||
@ -287,12 +280,11 @@
|
||||
#endif // TUSB_OPT_HOST_ENABLED
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Port Options
|
||||
// TUP for TinyUSB Port (can be renamed)
|
||||
// Port Specific
|
||||
// TUP stand for TinyUSB Port (can be renamed)
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
// TUP_ARCH_STRICT_ALIGN if arch cannot access unaligned memory
|
||||
|
||||
//------------- Unaligned Memory -------------//
|
||||
|
||||
// ARMv7+ (M3-M7, M23-M33) can access unaligned memory
|
||||
#if (defined(__ARM_ARCH) && (__ARM_ARCH >= 7))
|
||||
@ -311,6 +303,7 @@
|
||||
#define TUP_MCU_STRICT_ALIGN 0
|
||||
#endif
|
||||
|
||||
|
||||
//------------------------------------------------------------------
|
||||
// Configuration Validation
|
||||
//------------------------------------------------------------------
|
||||
|
||||
Reference in New Issue
Block a user