Update IDF to f586f5e (#1296)

* Update BLE lib

* Update IDF to f586f5e

* Restructure Bluetooth Serial includes

* Update esptool and gen_esp32part

* Add partition scheme selection for menuconfig

* Add partition scheme selection for Arduino IDE

* Fix BLE example

* Second attempt BLE fix

* Add exceptions to PIO

Kconfig.projbuild

@@ -0,0 +1,110 @@
+menu "Arduino Configuration"
+
+config ENABLE_ARDUINO_DEPENDS
+    bool
+    select LWIP_SO_RCVBUF
+    select ETHERNET
+    select WIFI_ENABLED
+    select ESP32_PHY_CALIBRATION_AND_DATA_STORAGE
+    select MEMMAP_SMP
+    default "y"
+
+config AUTOSTART_ARDUINO
+    bool "Autostart Arduino setup and loop on boot"
+    default "n"
+    help
+        Enabling this option will implement app_main and start Arduino.
+        All you need to implement in your main.cpp is setup() and loop()
+        and include Arduino.h
+        If disabled, you can call initArduino() to run any preparations
+        required by the framework
+
+config DISABLE_HAL_LOCKS
+    bool "Disable mutex locks for HAL"
+    default "n"
+    help
+        Enabling this option will run all hardware abstraction without locks.
+        While communication with external hardware will be faster, you need to
+        make sure that there is no option to use the same bus from another thread
+        or interrupt at the same time. Option is best used with Arduino enabled
+        and code implemented only in setup/loop and Arduino callbacks
+
+menu "Debug Log Configuration"
+choice ARDUHAL_LOG_DEFAULT_LEVEL
+    bool "Default log level"
+    default ARDUHAL_LOG_DEFAULT_LEVEL_ERROR
+    help
+        Specify how much output to see in logs by default.
+
+config ARDUHAL_LOG_DEFAULT_LEVEL_NONE
+    bool "No output"
+config ARDUHAL_LOG_DEFAULT_LEVEL_ERROR
+    bool "Error"
+config ARDUHAL_LOG_DEFAULT_LEVEL_WARN
+    bool "Warning"
+config ARDUHAL_LOG_DEFAULT_LEVEL_INFO
+    bool "Info"
+config ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG
+    bool "Debug"
+config ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE
+    bool "Verbose"
+endchoice
+
+config ARDUHAL_LOG_DEFAULT_LEVEL
+    int
+    default 0 if ARDUHAL_LOG_DEFAULT_LEVEL_NONE
+    default 1 if ARDUHAL_LOG_DEFAULT_LEVEL_ERROR
+    default 2 if ARDUHAL_LOG_DEFAULT_LEVEL_WARN
+    default 3 if ARDUHAL_LOG_DEFAULT_LEVEL_INFO
+    default 4 if ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG
+    default 5 if ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE
+
+config ARDUHAL_LOG_COLORS
+    bool "Use ANSI terminal colors in log output"
+    default "n"
+    help
+        Enable ANSI terminal color codes in bootloader output.
+        In order to view these, your terminal program must support ANSI color codes.
+
+config ARDUHAL_ESP_LOG
+    bool "Forward ESP_LOGx to Arduino log output"
+    default "n"
+    help
+        This option will redefine the ESP_LOGx macros to Arduino's log_x macros.
+        To enable for your application, add the follwing after your includes:
+        #ifdef ARDUINO_ARCH_ESP32
+        #include "esp32-hal-log.h"
+        #endif
+
+endmenu
+
+choice ARDUHAL_PARTITION_SCHEME
+    bool "Used partition scheme"
+    default ARDUHAL_PARTITION_SCHEME_DEFAULT
+    help
+        Specify which partition scheme to be used.
+
+config ARDUHAL_PARTITION_SCHEME_DEFAULT
+    bool "Default"
+config ARDUHAL_PARTITION_SCHEME_MINIMAL
+    bool "Minimal (for 2MB FLASH)"
+config ARDUHAL_PARTITION_SCHEME_NO_OTA
+    bool "No OTA (for large apps)"
+endchoice
+
+config ARDUHAL_PARTITION_SCHEME
+    string
+    default "default" if ARDUHAL_PARTITION_SCHEME_DEFAULT
+    default "minimal" if ARDUHAL_PARTITION_SCHEME_MINIMAL
+    default "no_ota" if ARDUHAL_PARTITION_SCHEME_NO_OTA
+
+
+config AUTOCONNECT_WIFI
+    bool "Autoconnect WiFi on boot"
+    default "n"
+    depends on AUTOSTART_ARDUINO
+    help
+        If enabled, WiFi will connect to the last used SSID (if station was enabled),
+        else connection will be started only after calling WiFi.begin(ssid, password)
+
+endmenu