feedc0de/arduino-esp32
1
0
Fork 0
forked from espressif/arduino-esp32
Code Pull Requests Activity

Esp32 s3 support (#6341)

Browse Source 
Co-authored-by: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com>
Co-authored-by: Rodrigo Garcia <rodrigo.garcia@espressif.com>
Co-authored-by: Tomáš Pilný <34927466+PilnyTomas@users.noreply.github.com>
Co-authored-by: Pedro Minatel <pedro.minatel@espressif.com>
Co-authored-by: Ivan Grokhotkov <ivan@espressif.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
Co-authored-by: Limor "Ladyada" Fried <limor@ladyada.net>
This commit is contained in:
Me No Dev
2022-03-28 12:09:41 +03:00
committed by GitHub
parent 3f79097d5f
commit 8ee5f0a11e
3774 changed files with 685773 additions and 19284 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
libraries/ESP32/examples/RMT/RMTCallback/RMTCallback.ino
View File

@ -12,7 +12,10 @@ class MyProcessor {
public:
MyProcessor(uint8_t pin, float nanoTicks) {
assert((rmt_recv = rmtInit(21, RMT_RX_MODE, RMT_MEM_192)));
if ((rmt_recv = rmtInit(pin, RMT_RX_MODE, RMT_MEM_192)) == NULL)
{
Serial.println("init receiver failed\n");
}
realNanoTick = rmtSetTick(rmt_recv, nanoTicks);
};
@ -59,6 +62,6 @@ void setup()
void loop()
{
Serial.printf("GPIO 4: %08x 5: %08x 6: %08x\n", mp1.val(), mp2.val(), mp3.val());
Serial.printf("GPIO 4: %08x 5: %08x 10: %08x\n", mp1.val(), mp2.val(), mp3.val());
delay(500);
}

13
libraries/ESP32/examples/RMT/RMTWriteNeoPixel/RMTWriteNeoPixel.ino
View File

@ -5,6 +5,17 @@
#include "esp32-hal.h"
// The effect seen in ESP32C3, ESP32S2 and ESP32S3 is like a Blink of RGB LED
#if CONFIG_IDF_TARGET_ESP32S2
#define BUILTIN_RGBLED_PIN 18
#elif CONFIG_IDF_TARGET_ESP32S3
#define BUILTIN_RGBLED_PIN 48
#elif CONFIG_IDF_TARGET_ESP32C3
#define BUILTIN_RGBLED_PIN 8
#else
#define BUILTIN_RGBLED_PIN 21 // ESP32 has no builtin RGB LED
#endif
#define NR_OF_LEDS 8*4
#define NR_OF_ALL_BITS 24*NR_OF_LEDS
@ -41,7 +52,7 @@ void setup()
{
Serial.begin(115200);
if ((rmt_send = rmtInit(18, RMT_TX_MODE, RMT_MEM_64)) == NULL)
if ((rmt_send = rmtInit(BUILTIN_RGBLED_PIN, RMT_TX_MODE, RMT_MEM_64)) == NULL)
{
Serial.println("init sender failed\n");
}