Update IDF to aaf1239 (#1539)

* fix sdmmc config

* Fix warnings in EEPROM

from @Curclamas

* remove leftover TAG in EEPROM

* Initial add of @stickbreaker i2c

* Add log_n

* fix warnings when log is off

* i2c code clean up and reorganization

* add flags to interrupt allocator

* fix sdmmc config

* Fix warnings in EEPROM

from @Curclamas

* remove leftover TAG in EEPROM

* fix errors with latest IDF

* fix debug optimization (#1365)

incorrect optimization for debugging tick markers.

* Fix some missing BT header

* Change BTSerial log calls

* Update BLE lib

* Arduino-ESP32 release management scripted (#1515)

* Calculate an absolute path for a custom partitions table (#1452)

* * Arduino-ESP32 release management scripted
(ready-to-merge)

* * secure env for espressif/arduino-esp32

* * build tests enabled
* gitter webhook enabled

* * gitter room link fixed
* better comment

* * filepaths fixed

* BT Serial adjustments

* * don't run sketch builds & tests for tagged builds

* Return false from WiFi.hostByName() if hostname is not resolved

* Free BT Memory when BT is not used

* WIFI_MODE_NULL is not supported anymore

* Select some key examples to build with PlatformIO to save some time

* Update BLE lib

* Fixed BLE lib

* Major WiFi overhaul

- auto reconnect on connection loss now works
- moved to event groups
- some code clean up and procedure optimizations
- new methods to get a more elaborate system ststus

* Add cmake tests to travis

* Add initial AsyncUDP

* Add NetBIOS lib and fix CMake includes

* Add Initial WebServer

* Fix WebServer and examples

* travis not quiting on build fail

* Try different travis build

* Update IDF to aaf1239

* Fix WPS Example

* fix script permission and add some fail tests to sketch builder

* Add missing space in WiFiClient::write(Stream &stream)

cores/esp32/esp32-hal-i2c.h

@@ -11,6 +11,7 @@
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.
+// modified Nov 2017 by Chuck Todd <StickBreaker> to support Interrupt Driven I/O
 
 #ifndef _ESP32_HAL_I2C_H_
 #define _ESP32_HAL_I2C_H_
@@ -21,37 +22,48 @@ extern "C" {
 
 #include <stdint.h>
 #include <stdbool.h>
+#include "freertos/FreeRTOS.h"
+#include "freertos/event_groups.h"
 
+// External Wire.h equivalent error Codes
 typedef enum {
-    I2C_ERROR_OK,
+    I2C_ERROR_OK=0,
     I2C_ERROR_DEV,
     I2C_ERROR_ACK,
     I2C_ERROR_TIMEOUT,
     I2C_ERROR_BUS,
-    I2C_ERROR_BUSY
+    I2C_ERROR_BUSY,
+    I2C_ERROR_MEMORY,
+    I2C_ERROR_CONTINUE,
+    I2C_ERROR_NO_BEGIN
 } i2c_err_t;
 
 struct i2c_struct_t;
 typedef struct i2c_struct_t i2c_t;
 
-i2c_t * i2cInit(uint8_t i2c_num, uint16_t slave_addr, bool addr_10bit_en);
-
-//call this after you setup the bus and pins to send empty packet
-//required because when pins are attached, they emit pulses that lock the bus
-void i2cInitFix(i2c_t * i2c);
-
+i2c_t * i2cInit(uint8_t i2c_num, int8_t sda, int8_t scl, uint32_t clk_speed);
+void i2cRelease(i2c_t *i2c); // free ISR, Free DQ, Power off peripheral clock.  Must call i2cInit() to recover
+i2c_err_t i2cWrite(i2c_t * i2c, uint16_t address, uint8_t* buff, uint16_t size, bool sendStop, uint16_t timeOutMillis);
+i2c_err_t i2cRead(i2c_t * i2c, uint16_t address, uint8_t* buff, uint16_t size, bool sendStop, uint16_t timeOutMillis, uint32_t *readCount);
+i2c_err_t i2cFlush(i2c_t *i2c);
 i2c_err_t i2cSetFrequency(i2c_t * i2c, uint32_t clk_speed);
 uint32_t i2cGetFrequency(i2c_t * i2c);
 
+//Functions below should be used only if well understood
+//Might be deprecated and removed in future
 i2c_err_t i2cAttachSCL(i2c_t * i2c, int8_t scl);
 i2c_err_t i2cDetachSCL(i2c_t * i2c, int8_t scl);
 i2c_err_t i2cAttachSDA(i2c_t * i2c, int8_t sda);
 i2c_err_t i2cDetachSDA(i2c_t * i2c, int8_t sda);
 
-i2c_err_t i2cWrite(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data, uint16_t len, bool sendStop);
-i2c_err_t i2cRead(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data, uint16_t len, bool sendStop);
+//Stickbreakers ISR Support
+i2c_err_t i2cProcQueue(i2c_t *i2c, uint32_t *readCount, uint16_t timeOutMillis);
+i2c_err_t i2cAddQueueWrite(i2c_t *i2c, uint16_t i2cDeviceAddr, uint8_t *dataPtr, uint16_t dataLen, bool SendStop, EventGroupHandle_t event);
+i2c_err_t i2cAddQueueRead(i2c_t *i2c, uint16_t i2cDeviceAddr, uint8_t *dataPtr, uint16_t dataLen, bool SendStop, EventGroupHandle_t event);
 
-void i2cReset(i2c_t* i2c);
+//stickbreaker debug support
+void i2cDumpInts(uint8_t num);
+void i2cDumpI2c(i2c_t *i2c);
 
 #ifdef __cplusplus
 }