feedc0de/arduino-esp32
1
0
Fork 0
forked from espressif/arduino-esp32
Code Pull Requests Activity

latest IDF, 240MHz and BLE enabled libs

Browse Source
This commit is contained in:
me-no-dev
2016-11-28 01:11:36 +02:00
parent 1d1aeecde2
commit b82d0e166a
74 changed files with 1999 additions and 1139 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
tools/sdk/include/config/sdkconfig.h
View File

@ -4,8 +4,10 @@
* Espressif IoT Development Framework Configuration
*
*/
#define CONFIG_ESP32_PHY_MAX_TX_POWER 20
#define CONFIG_TRACEMEM_RESERVE_DRAM 0x0
#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE 1
#define CONFIG_MEMMAP_BT 1
#define CONFIG_SECURE_BOOTLOADER_DISABLED 1
#define CONFIG_ESPTOOLPY_FLASHSIZE_4MB 1
#define CONFIG_ESPTOOLPY_FLASHFREQ "80m"
@ -13,10 +15,10 @@
#define CONFIG_ESPTOOLPY_FLASHSIZE "4MB"
#define CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL 1
#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1
#define CONFIG_BT_RESERVE_DRAM 0x0
#define CONFIG_BT_RESERVE_DRAM 0x10000
#define CONFIG_LOG_BOOTLOADER_LEVEL_ERROR 1
#define CONFIG_LWIP_MAX_SOCKETS 4
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_160 1
#define CONFIG_ESP32_ENABLE_STACK_BT 1
#define CONFIG_ULP_COPROC_RESERVE_MEM 0
#define CONFIG_ESPTOOLPY_BAUD 921600
#define CONFIG_TOOLPREFIX "xtensa-esp32-elf-"
@ -24,8 +26,8 @@
#define CONFIG_LWIP_THREAD_LOCAL_STORAGE_INDEX 0
#define CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN 16384
#define CONFIG_AUTOSTART_ARDUINO 1
#define CONFIG_ESP32_ENABLE_STACK_WIFI 1
#define CONFIG_LOG_DEFAULT_LEVEL_ERROR 1
#define CONFIG_MBEDTLS_MPI_USE_INTERRUPT 1
#define CONFIG_MAIN_TASK_STACK_SIZE 4096
#define CONFIG_ESPTOOLPY_FLASHMODE "dio"
#define CONFIG_LOG_DEFAULT_LEVEL 1
@ -36,26 +38,32 @@
#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv"
#define CONFIG_LWIP_DHCP_MAX_NTP_SERVERS 1
#define CONFIG_PARTITION_TABLE_SINGLE_APP 1
#define CONFIG_WIFI_ENABLED 1
#define CONFIG_ESPTOOLPY_FLASHFREQ_80M 1
#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE 2048
#define CONFIG_PHY_DATA_OFFSET 0xf000
#define CONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET 0x10000
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ 160
#define CONFIG_MBEDTLS_MPI_INTERRUPT_NUM 18
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ 240
#define CONFIG_MBEDTLS_HARDWARE_AES 1
#define CONFIG_FREERTOS_HZ 1000
#define CONFIG_FREERTOS_ASSERT_FAIL_ABORT 1
#define CONFIG_MONITOR_BAUD_115200B 1
#define CONFIG_LOG_BOOTLOADER_LEVEL 1
#define CONFIG_ESPTOOLPY_BAUD_OTHER_VAL 115200
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_240 1
#define CONFIG_LWIP_SO_REUSE 1
#define CONFIG_BT_ENABLED 1
#define CONFIG_MONITOR_BAUD 115200
#define CONFIG_FREERTOS_CORETIMER_0 1
#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv"
#define CONFIG_FREERTOS_ISR_STACKSIZE 1536
#define CONFIG_OPTIMIZATION_LEVEL_DEBUG 1
#define CONFIG_ESP32_PHY_AUTO_INIT 1
#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE 32
#define CONFIG_ESPTOOLPY_BAUD_921600B 1
#define CONFIG_APP_OFFSET 0x10000
#define CONFIG_MEMMAP_SMP 1
#define CONFIG_MBEDTLS_HARDWARE_MPI 1
#define CONFIG_MONITOR_BAUD_OTHER_VAL 115200
#define CONFIG_ESPTOOLPY_PORT "/dev/tty.SLAB_USBtoUART"
#define CONFIG_ESP32_PANIC_PRINT_HALT 1

359
tools/sdk/include/driver/driver/pcnt.h Normal file
View File

@ -0,0 +1,359 @@
#ifndef __PCNT_H__
#define __PCNT_H__
#include <esp_types.h>
#include "esp_intr.h"
#include "esp_err.h"
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "freertos/xtensa_api.h"
#include "soc/soc.h"
#include "soc/pcnt_reg.h"
#include "soc/pcnt_struct.h"
#include "soc/gpio_sig_map.h"
#include "driver/gpio.h"
#ifdef __cplusplus
extern "C" {
#endif
#define PCNT_PIN_NOT_USED (-1) /*!< Pin are not used */
typedef enum {
PCNT_MODE_KEEP = 0, /*!< Control mode: won't change counter mode*/
PCNT_MODE_REVERSE = 1, /*!< Control mode: invert counter mode(increase -> decrease, decrease -> increase);*/
PCNT_MODE_DISABLE = 2, /*!< Control mode: Inhibit counter(counter value will not change in this condition)*/
PCNT_MODE_MAX
} pcnt_ctrl_mode_t;
typedef enum {
PCNT_COUNT_DIS = 0, /*!< Counter mode: Decrease counter value*/
PCNT_COUNT_INC = 1, /*!< Counter mode: Increase counter value*/
PCNT_COUNT_DEC = 2, /*!< Counter mode: Inhibit counter(counter value will not change in this condition)*/
PCNT_COUNT_MAX
} pcnt_count_mode_t;
typedef enum {
PCNT_UNIT_0 = 0, /*!< PCNT unit0 */
PCNT_UNIT_1 = 1, /*!< PCNT unit1 */
PCNT_UNIT_2 = 2, /*!< PCNT unit2 */
PCNT_UNIT_3 = 3, /*!< PCNT unit3 */
PCNT_UNIT_4 = 4, /*!< PCNT unit4 */
PCNT_UNIT_5 = 5, /*!< PCNT unit5 */
PCNT_UNIT_6 = 6, /*!< PCNT unit6 */
PCNT_UNIT_7 = 7, /*!< PCNT unit7 */
PCNT_UNIT_MAX,
} pcnt_unit_t;
typedef enum{
PCNT_CHANNEL_0 = 0x00, /*!< PCNT channel0 */
PCNT_CHANNEL_1 = 0x01, /*!< PCNT channel1 */
PCNT_CHANNEL_MAX,
} pcnt_channel_t;
typedef enum {
PCNT_EVT_L_LIM = 0, /*!< PCNT watch point event: Minimum counter value */
PCNT_EVT_H_LIM = 1, /*!< PCNT watch point event: Maximum counter value*/
PCNT_EVT_THRES_0 = 2, /*!< PCNT watch point event: threshold0 value event*/
PCNT_EVT_THRES_1 = 3, /*!< PCNT watch point event: threshold1 value event*/
PCNT_EVT_ZERO = 4, /*!< PCNT watch point event: counter value zero event*/
PCNT_EVT_MAX
} pcnt_evt_type_t;
/**
* @brief Pulse Counter configure struct
*/
typedef struct {
int pulse_gpio_num; /*!< Pulse input gpio_num, if you want to use gpio16, pulse_gpio_num = 16, a negative value will be ignored */
int ctrl_gpio_num; /*!< Contol signal input gpio_num, a negative value will be ignored*/
pcnt_ctrl_mode_t lctrl_mode; /*!< PCNT low control mode*/
pcnt_ctrl_mode_t hctrl_mode; /*!< PCNT high control mode*/
pcnt_count_mode_t pos_mode; /*!< PCNT positive edge count mode*/
pcnt_count_mode_t neg_mode; /*!< PCNT negative edge count mode*/
int16_t counter_h_lim; /*!< Maximum counter value */
int16_t counter_l_lim; /*!< Minimum counter value */
pcnt_unit_t unit; /*!< PCNT unit number */
pcnt_channel_t channel; /*!< the PCNT channel */
} pcnt_config_t;
/**
* @brief Configure Pulse Counter unit
*
* @param pcnt_config Pointer of Pulse Counter unit configure parameter
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_unit_config(pcnt_config_t *pcnt_config);
/**
* @brief Get pulse counter value
*
* @param pcnt_unit Pulse Counter unit number
* @param count Pointer to accept counter value
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_get_counter_value(pcnt_unit_t pcnt_unit, int16_t* count);
/**
* @brief Pause PCNT counter of PCNT unit
*
* @param pcnt_unit PCNT unit number
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_counter_pause(pcnt_unit_t pcnt_unit);
/**
* @brief Resume counting for PCNT counter
*
* @param pcnt_unit PCNT unit number, select from pcnt_unit_t
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_counter_resume(pcnt_unit_t pcnt_unit);
/**
* @brief Clear and reset PCNT counter value to zero
*
* @param pcnt_unit PCNT unit number, select from pcnt_unit_t
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_counter_clear(pcnt_unit_t pcnt_unit);
/**
* @brief Enable PCNT interrupt for PCNT unit
* @note
* Each Pulse counter unit has five watch point events that share the same interrupt.
* Configure events with pcnt_event_enable() and pcnt_event_disable()
*
* @param pcnt_unit PCNT unit number
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_intr_enable(pcnt_unit_t pcnt_unit);
/**
* @brief Disable PCNT interrupt for PCNT uint
*
* @param pcnt_unit PCNT unit number
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_intr_disable(pcnt_unit_t pcnt_unit);
/**
* @brief Enable PCNT event of PCNT unit
*
* @param unit PCNT unit number
* @param evt_type Watch point event type.
* All enabled events share the same interrupt (one interrupt per pulse counter unit).
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_event_enable(pcnt_unit_t unit, pcnt_evt_type_t evt_type);
/**
* @brief Disable PCNT event of PCNT unit
*
* @param unit PCNT unit number
* @param evt_type Watch point event type.
* All enabled events share the same interrupt (one interrupt per pulse counter unit).
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_event_disable(pcnt_unit_t unit, pcnt_evt_type_t evt_type);
/**
* @brief Set PCNT event value of PCNT unit
*
* @param unit PCNT unit number
* @param evt_type Watch point event type.
* All enabled events share the same interrupt (one interrupt per pulse counter unit).
*
* @param value Counter value for PCNT event
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_set_event_value(pcnt_unit_t unit, pcnt_evt_type_t evt_type, int16_t value);
/**
* @brief Get PCNT event value of PCNT unit
*
* @param unit PCNT unit number
* @param evt_type Watch point event type.
* All enabled events share the same interrupt (one interrupt per pulse counter unit).
* @param value Pointer to accept counter value for PCNT event
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_get_event_value(pcnt_unit_t unit, pcnt_evt_type_t evt_type, int16_t *value);
/**
* @brief Register PCNT interrupt handler, the handler is an ISR.
* The handler will be attached to the same CPU core that this function is running on.
* @note
* Users should know that which CPU is running and then pick a INUM that is not used by system.
* We can find the information of INUM and interrupt level in soc.h.
*
* @param pcnt_intr_num PCNT interrupt number, check the info in soc.h, and please see the core-isa.h for more details
* @param fn Interrupt handler function.
* @note
* Note that the handler function MUST be defined with attribution of "IRAM_ATTR".
* @param arg Parameter for handler function
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Function pointer error.
*/
esp_err_t pcnt_isr_register(uint32_t pcnt_intr_num, void (*fn)(void*), void * arg);
/**
* @brief Configure PCNT pulse signal input pin and control input pin
*
* @param unit PCNT unit number
* @param channel PCNT channel number
* @param pulse_io Pulse signal input GPIO
* @note
* Set to PCNT_PIN_NOT_USED if unused.
* @param ctrl_io Control signal input GPIO
* @note
* Set to PCNT_PIN_NOT_USED if unused.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_set_pin(pcnt_unit_t unit, pcnt_channel_t channel, int pulse_io, int ctrl_io);
/**
* @brief Enable PCNT input filter
*
* @param unit PCNT unit number
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_filter_enable(pcnt_unit_t unit);
/**
* @brief Disable PCNT input filter
*
* @param unit PCNT unit number
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_filter_disable(pcnt_unit_t unit);
/**
* @brief Set PCNT filter value
*
* @param unit PCNT unit number
* @param filter_val PCNT signal filter value, counter in APB_CLK cycles.
* Any pulses lasting shorter than this will be ignored when the filter is enabled.
* @note
* filter_val is a 10-bit value, so the maximum filter_val should be limited to 1023.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_set_filter_value(pcnt_unit_t unit, uint16_t filter_val);
/**
* @brief Get PCNT filter value
*
* @param unit PCNT unit number
* @param filter_val Pointer to accept PCNT filter value.
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_get_filter_value(pcnt_unit_t unit, uint16_t *filter_val);
/**
* @brief Set PCNT counter mode
*
* @param unit PCNT unit number
* @param channel PCNT channel number
* @param pos_mode Counter mode when detecting positive edge
* @param neg_mode Counter mode when detecting negative edge
* @param hctrl_mode Counter mode when control signal is high level
* @param lctrl_mode Counter mode when control signal is low level
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t pcnt_set_mode(pcnt_unit_t unit, pcnt_channel_t channel,
pcnt_count_mode_t pos_mode, pcnt_count_mode_t neg_mode,
pcnt_ctrl_mode_t hctrl_mode, pcnt_ctrl_mode_t lctrl_mode);
/**
* @addtogroup pcnt-examples
*
* @{
*
* EXAMPLE OF PCNT CONFIGURATION
* ==============================
* @code{c}
* //1. Config PCNT unit
* pcnt_config_t pcnt_config = {
* .pulse_gpio_num = 4, //set gpio4 as pulse input gpio
* .ctrl_gpio_num = 5, //set gpio5 as control gpio
* .channel = PCNT_CHANNEL_0, //use unit 0 channel 0
* .lctrl_mode = PCNT_MODE_REVERSE, //when control signal is low ,reverse the primary counter mode(inc->dec/dec->inc)
* .hctrl_mode = PCNT_MODE_KEEP, //when control signal is high,keep the primary counter mode
* .pos_mode = PCNT_COUNT_INC, //increment the counter
* .neg_mode = PCNT_COUNT_DIS, //keep the counter value
* .counter_h_lim = 10,
* .counter_l_lim = -10,
* };
* pcnt_unit_config(&pcnt_config); //init unit
* @endcode
*
* EXAMPLE OF PCNT EVENT SETTING
* ==============================
* @code{c}
* //2. Configure PCNT watchpoint event.
* pcnt_set_event_value(PCNT_UNIT_0, PCNT_EVT_THRES_1, 5); //set thres1 value
* pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_THRES_1); //enable thres1 event
* @endcode
*
* For more examples please refer to PCNT example code in IDF_PATH/examples
*
* @}
*/
#ifdef __cplusplus
}
#endif
#endif

2
tools/sdk/include/driver/driver/periph_ctrl.h
View File

@ -39,6 +39,8 @@ typedef enum {
PERIPH_PWM3_MODULE,
PERIPH_UHCI0_MODULE,
PERIPH_UHCI1_MODULE,
PERIPH_RMT_MODULE,
PERIPH_PCNT_MODULE,
} periph_module_t;
/**

794
tools/sdk/include/driver/driver/rmt.h Normal file
View File

@ -0,0 +1,794 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _DRIVER_RMT_CTRL_H_
#define _DRIVER_RMT_CTRL_H_
#include "esp_err.h"
#include "soc/rmt_reg.h"
#include "soc/dport_reg.h"
#include "soc/rmt_struct.h"
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "freertos/xtensa_api.h"
#include "freertos/ringbuf.h"
#include "driver/gpio.h"
#include "driver/periph_ctrl.h"
#ifdef __cplusplus
extern "C" {
#endif
#define RMT_MEM_BLOCK_BYTE_NUM (256)
#define RMT_MEM_ITEM_NUM (RMT_MEM_BLOCK_BYTE_NUM/4)
typedef enum {
RMT_CHANNEL_0=0, /*!< RMT Channel0 */
RMT_CHANNEL_1, /*!< RMT Channel1 */
RMT_CHANNEL_2, /*!< RMT Channel2 */
RMT_CHANNEL_3, /*!< RMT Channel3 */
RMT_CHANNEL_4, /*!< RMT Channel4 */
RMT_CHANNEL_5, /*!< RMT Channel5 */
RMT_CHANNEL_6, /*!< RMT Channel6 */
RMT_CHANNEL_7, /*!< RMT Channel7 */
RMT_CHANNEL_MAX
} rmt_channel_t;
typedef enum {
RMT_MEM_OWNER_TX = 0, /*!< RMT RX mode, RMT transmitter owns the memory block*/
RMT_MEM_OWNER_RX = 1, /*!< RMT RX mode, RMT receiver owns the memory block*/
RMT_MEM_OWNER_MAX,
}rmt_mem_owner_t;
typedef enum {
RMT_BASECLK_REF = 0, /*!< RMT source clock system reference tick, 1MHz by default(Not supported in this version) */
RMT_BASECLK_APB, /*!< RMT source clock is APB CLK, 80Mhz by default */
RMT_BASECLK_MAX,
} rmt_source_clk_t;
typedef enum {
RMT_DATA_MODE_FIFO = 0, /*<! RMT memory access in FIFO mode */
RMT_DATA_MODE_MEM = 1, /*<! RMT memory access in memory mode */
RMT_DATA_MODE_MAX,
} rmt_data_mode_t;
typedef enum {
RMT_MODE_TX=0, /*!< RMT TX mode */
RMT_MODE_RX, /*!< RMT RX mode */
RMT_MODE_MAX
} rmt_mode_t;
typedef enum {
RMT_IDLE_LEVEL_LOW=0, /*!< RMT TX idle level: low Level */
RMT_IDLE_LEVEL_HIGH, /*!< RMT TX idle level: high Level */
RMT_IDLE_LEVEL_MAX,
} rmt_idle_level_t;
typedef enum {
RMT_CARRIER_LEVEL_LOW=0, /*!< RMT carrier wave is modulated for low Level output */
RMT_CARRIER_LEVEL_HIGH, /*!< RMT carrier wave is modulated for high Level output */
RMT_CARRIER_LEVEL_MAX
} rmt_carrier_level_t;
/**
* @brief Data struct of RMT TX configure parameters
*/
typedef struct {
bool loop_en; /*!< RMT loop output mode*/
uint32_t carrier_freq_hz; /*!< RMT carrier frequency */
uint8_t carrier_duty_percent; /*!< RMT carrier duty (%) */
rmt_carrier_level_t carrier_level; /*!< RMT carrier level */
bool carrier_en; /*!< RMT carrier enable */
rmt_idle_level_t idle_level; /*!< RMT idle level */
bool idle_output_en; /*!< RMT idle level output enable*/
}rmt_tx_config_t;
/**
* @brief Data struct of RMT RX configure parameters
*/
typedef struct {
bool filter_en; /*!< RMT receiver filer enable*/
uint8_t filter_ticks_thresh; /*!< RMT filter tick number */
uint16_t idle_threshold; /*!< RMT RX idle threshold */
}rmt_rx_config_t;
/**
* @brief Data struct of RMT configure parameters
*/
typedef struct {
rmt_mode_t rmt_mode; /*!< RMT mode: transmitter or receiver */
rmt_channel_t channel; /*!< RMT channel */
uint8_t clk_div; /*!< RMT channel counter divider */
gpio_num_t gpio_num; /*!< RMT GPIO number */
uint8_t mem_block_num; /*!< RMT memory block number */
union{
rmt_tx_config_t tx_config; /*!< RMT TX parameter */
rmt_rx_config_t rx_config; /*!< RMT RX parameter */
};
} rmt_config_t;
/**
* @brief Set RMT clock divider, channel clock is divided from source clock.
*
* @param channel RMT channel (0-7)
*
* @param div_cnt RMT counter clock divider
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_clk_div(rmt_channel_t channel, uint8_t div_cnt);
/**
* @brief Get RMT clock divider, channel clock is divided from source clock.
*
* @param channel RMT channel (0-7)
*
* @param div_cnt pointer to accept RMT counter divider
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_get_clk_div(rmt_channel_t channel, uint8_t* div_cnt);
/**
* @brief Set RMT RX idle threshold value
*
* In receive mode, when no edge is detected on the input signal
* for longer than idle_thres channel clock cycles,
* the receive process is finished.
*
* @param channel RMT channel (0-7)
*
* @param thresh RMT RX idle threshold
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_rx_idle_thresh(rmt_channel_t channel, uint16_t thresh);
/**
* @brief Get RMT idle threshold value.
*
* In receive mode, when no edge is detected on the input signal
* for longer than idle_thres channel clock cycles,
* the receive process is finished.
*
* @param channel RMT channel (0-7)
*
* @param thresh pointer to accept RMT RX idle threshold value
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_get_rx_idle_thresh(rmt_channel_t channel, uint16_t *thresh);
/**
* @brief Set RMT memory block number for RMT channel
*
* This function is used to configure the amount of memory blocks allocated to channel n
* The 8 channels share a 512x32-bit RAM block which can be read and written
* by the processor cores over the APB bus, as well as read by the transmitters
* and written by the receivers.
* The RAM address range for channel n is start_addr_CHn to end_addr_CHn, which are defined by:
* Memory block start address is RMT_CHANNEL_MEM(n) (in soc/rmt_reg.h),
* that is, start_addr_chn = RMT base address + 0x800 + 64 ∗ 4 ∗ n, and
* end_addr_chn = RMT base address + 0x800 + 64 ∗ 4 ∗ n + 64 ∗ 4 ∗ RMT_MEM_SIZE_CHn mod 512 ∗ 4
* @note
* If memory block number of one channel is set to a value greater than 1, this channel will occupy the memory
* block of the next channel.
* Channel0 can use at most 8 blocks of memory, accordingly channel7 can only use one memory block.
*
* @param channel RMT channel (0-7)
*
* @param rmt_mem_num RMT RX memory block number, one block has 64 * 32 bits.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_mem_block_num(rmt_channel_t channel, uint8_t rmt_mem_num);
/**
* @brief Get RMT memory block number
*
* @param channel RMT channel (0-7)
*
* @param rmt_mem_num Pointer to accept RMT RX memory block number
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_get_mem_block_num(rmt_channel_t channel, uint8_t* rmt_mem_num);
/**
* @brief Configure RMT carrier for TX signal.
*
* Set different values for carrier_high and carrier_low to set different frequency of carrier.
* The unit of carrier_high/low is the source clock tick, not the divided channel counter clock.
*
* @param channel RMT channel (0-7)
*
* @param carrier_en Whether to enable output carrier.
*
* @param high_level High level duration of carrier
*
* @param low_level Low level duration of carrier.
*
* @param carrier_level Configure the way carrier wave is modulated for channel0-7.
*
* 1'b1:transmit on low output level
*
* 1'b0:transmit on high output level
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_tx_carrier(rmt_channel_t channel, bool carrier_en, uint16_t high_level, uint16_t low_level, rmt_carrier_level_t carrier_level);
/**
* @brief Set RMT memory in low power mode.
*
* Reduce power consumed by memory. 1:memory is in low power state.
*
* @param channel RMT channel (0-7)
*
* @param pd_en RMT memory low power enable.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_mem_pd(rmt_channel_t channel, bool pd_en);
/**
* @brief Get RMT memory low power mode.
*
* @param channel RMT channel (0-7)
*
* @param pd_en Pointer to accept RMT memory low power mode.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_get_mem_pd(rmt_channel_t channel, bool* pd_en);
/**
* @brief Set RMT start sending data from memory.
*
* @param channel RMT channel (0-7)
*
* @param tx_idx_rst Set true to reset memory index for TX.
* Otherwise, transmitter will continue sending from the last index in memory.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_tx_start(rmt_channel_t channel, bool tx_idx_rst);
/**
* @brief Set RMT stop sending.
*
* @param channel RMT channel (0-7)
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_tx_stop(rmt_channel_t channel);
/**
* @brief Set RMT start receiving data.
*
* @param channel RMT channel (0-7)
*
* @param rx_idx_rst Set true to reset memory index for receiver.
* Otherwise, receiver will continue receiving data to the last index in memory.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_rx_start(rmt_channel_t channel, bool rx_idx_rst);
/**
* @brief Set RMT stop receiving data.
*
* @param channel RMT channel (0-7)
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_rx_stop(rmt_channel_t channel);
/**
* @brief Reset RMT TX/RX memory index.
*
* @param channel RMT channel (0-7)
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_memory_rw_rst(rmt_channel_t channel);
/**
* @brief Set RMT memory owner.
*
* @param channel RMT channel (0-7)
*
* @param owner To set when the transmitter or receiver can process the memory of channel.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_memory_owner(rmt_channel_t channel, rmt_mem_owner_t owner);
/**
* @brief Get RMT memory owner.
*
* @param channel RMT channel (0-7)
*
* @param owner Pointer to get memory owner.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_get_memory_owner(rmt_channel_t channel, rmt_mem_owner_t* owner);
/**
* @brief Set RMT tx loop mode.
*
* @param channel RMT channel (0-7)
*
* @param loop_en To enable RMT transmitter loop sending mode.
*
* If set true, transmitter will continue sending from the first data
* to the last data in channel0-7 again and again.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_tx_loop_mode(rmt_channel_t channel, bool loop_en);
/**
* @brief Get RMT tx loop mode.
*
* @param channel RMT channel (0-7)
*
* @param loop_en Pointer to accept RMT transmitter loop sending mode.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_get_tx_loop_mode(rmt_channel_t channel, bool* loop_en);
/**
* @brief Set RMT RX filter.
*
* In receive mode, channel0-7 will ignore input pulse when the pulse width is smaller than threshold.
* Counted in source clock, not divided counter clock.
*
* @param channel RMT channel (0-7)
*
* @param rx_filter_en To enable RMT receiver filter.
*
* @param thresh Threshold of pulse width for receiver.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_rx_filter(rmt_channel_t channel, bool rx_filter_en, uint8_t thresh);
/**
* @brief Set RMT source clock
*
* RMT module has two source clock:
* 1. APB clock which is 80Mhz
* 2. REF tick clock, which would be 1Mhz( not supported in this version).
*
* @param channel RMT channel (0-7)
*
* @param base_clk To choose source clock for RMT module.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_source_clk(rmt_channel_t channel, rmt_source_clk_t base_clk);
/**
* @brief Get RMT source clock
*
* RMT module has two source clock:
* 1. APB clock which is 80Mhz
* 2. REF tick clock, which would be 1Mhz( not supported in this version).
*
* @param channel RMT channel (0-7)
*
* @param src_clk Pointer to accept source clock for RMT module.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_get_source_clk(rmt_channel_t channel, rmt_source_clk_t* src_clk);
/**
* @brief Set RMT idle output level for transmitter
*
* @param channel RMT channel (0-7)
*
* @param idle_out_en To enable idle level output.
*
* @param level To set the output signal's level for channel0-7 in idle state.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_idle_level(rmt_channel_t channel, bool idle_out_en, rmt_idle_level_t level);
/**
* @brief Get RMT status
*
* @param channel RMT channel (0-7)
*
* @param status Pointer to accept channel status.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_get_status(rmt_channel_t channel, uint32_t* status);
/**
* @brief Set mask value to RMT interrupt enable register.
*
* @param mask Bit mask to set to the register
*
*/
void rmt_set_intr_enable_mask(uint32_t mask);
/**
* @brief Clear mask value to RMT interrupt enable register.
*
* @param mask Bit mask to clear the register
*
*/
void rmt_clr_intr_enable_mask(uint32_t mask);
/**
* @brief Set RMT RX interrupt enable
*
* @param channel RMT channel (0 - 7)
*
* @param en enable or disable RX interrupt.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_rx_intr_en(rmt_channel_t channel, bool en);
/**
* @brief Set RMT RX error interrupt enable
*
* @param channel RMT channel (0 - 7)
*
* @param en enable or disable RX err interrupt.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_err_intr_en(rmt_channel_t channel, bool en);
/**
* @brief Set RMT TX interrupt enable
*
* @param channel RMT channel (0 - 7)
*
* @param en enable or disable TX interrupt.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_tx_intr_en(rmt_channel_t channel, bool en);
/**
* @brief Set RMT TX event interrupt enable
*
* @param channel RMT channel (0 - 7)
*
* @param en enable or disable TX event interrupt.
*
* @param evt_thresh RMT event interrupt threshold value
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_evt_intr_en(rmt_channel_t channel, bool en, uint16_t evt_thresh);
/**
* @brief Set RMT pins
*
* @param channel RMT channel (0 - 7)
*
* @param mode TX or RX mode for RMT
*
* @param gpio_num GPIO number to transmit or receive the signal.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num);
/**
* @brief Configure RMT parameters
*
* @param rmt_param RMT parameter structor
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_config(rmt_config_t* rmt_param);
/**
* @brief register RMT interrupt handler, the handler is an ISR.
*
* The handler will be attached to the same CPU core that this function is running on.
* Users should know that which CPU is running and then pick a INUM that is not used by system.
* We can find the information of INUM and interrupt level in soc.h.
* @note
* If you already called rmt_driver_install to use system RMT driver,
* please do not register ISR handler again.
*
* @param rmt_intr_num RMT interrupt number, check the info in soc.h, and please see the core-isa.h for more details
*
* @param fn Interrupt handler function.
*
* @note
* the handler function MUST be defined with attribution of "IRAM_ATTR".
*
* @param arg Parameter for handler function
*
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Function pointer error.
* - ESP_FAIL System driver installed, can not register ISR handler for RMT
*/
esp_err_t rmt_isr_register(uint8_t rmt_intr_num, void (* fn)(void* ), void * arg);
/**
* @brief Fill memory data of channel with given RMT items.
*
* @param channel RMT channel (0 - 7)
*
* @param item Pointer of items.
*
* @param item_num RMT sending items number.
*
* @param mem_offset Index offset of memory.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_fill_tx_items(rmt_channel_t channel, rmt_item32_t* item, uint16_t item_num, uint16_t mem_offset);
/**
* @brief Initialize RMT driver
*
* @param channel RMT channel (0 - 7)
*
* @param rx_buf_size Size of RMT RX ringbuffer.
*
* @note
* If we do not need RX ringbuffer, just set rx_buf_size to 0.
*
* @note
* When we call rmt_driver_install function, it will register a driver ISR handler,
* DO NOT REGISTER ISR HANDLER AGAIN.
*
* @param rmt_intr_num RMT interrupt number.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_driver_install(rmt_channel_t channel, size_t rx_buf_size, int rmt_intr_num);
/**
* @brief Uninstall RMT driver.
*
* @param channel RMT channel (0 - 7)
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_driver_uninstall(rmt_channel_t channel);
/**
* @brief RMT send waveform from rmt_item array.
*
* This API allows user to send waveform with any length.
*
* @param channel RMT channel (0 - 7)
*
* @param rmt_item head point of RMT items array.
*
* @param item_num RMT data item number.
*
* @param wait_tx_done If set 1, it will block the task and wait for sending done.
*
* If set 0, it will not wait and return immediately.
*
* @note
* This function will not copy data, instead, it will point to the original items,
* and send the waveform items.
* If wait_tx_done is set to true, this function will block and will not return until
* all items have been sent out.
* If wait_tx_done is set to false, this function will return immediately, and the driver
* interrupt will continue sending the items. We must make sure the item data will not be
* damaged when the driver is still sending items in driver interrupt.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_write_items(rmt_channel_t channel, rmt_item32_t* rmt_item, int item_num, bool wait_tx_done);
/**
* @brief Wait RMT TX finished.
*
* @param channel RMT channel (0 - 7)
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_wait_tx_done(rmt_channel_t channel);
/**
* @brief Get ringbuffer from UART.
*
* Users can get the RMT RX ringbuffer handler, and process the RX data.
*
* @param channel RMT channel (0 - 7)
*
* @param buf_handler Pointer to buffer handler to accept RX ringbuffer handler.
*
* @return
* - ESP_ERR_INVALID_ARG Parameter error
* - ESP_OK Success
*/
esp_err_t rmt_get_ringbuf_handler(rmt_channel_t channel, RingbufHandle_t* buf_handler);
/***************************EXAMPLE**********************************
*
* @note
* You can also refer to example/09_rmt_nec_tx_rx to have more information about how to use RMT module.
*
* ----------------EXAMPLE OF RMT SETTING ---------------------
* @code{c}
* //1. enable RMT
* //enable RMT module, or you can not set any register of it.
* //this will be done in rmt_config API.
* periph_module_enable(PERIPH_RMT_MODULE);
* @endcode
*
* @code{c}
* //2. set RMT transmitter
* void rmt_tx_init()
* {
* rmt_config_t rmt_tx;
* rmt_tx.channel = 0;
* rmt_tx.gpio_num = 16;
* rmt_tx.mem_block_num = 1;
* rmt_tx.clk_div = 100;
* rmt_tx.tx_config.loop_en = false;
* rmt_tx.tx_config.carrier_duty_percent = 50;
* rmt_tx.tx_config.carrier_freq_hz = 38000;
* rmt_tx.tx_config.carrier_level = 1;
* rmt_tx.tx_config.carrier_en = RMT_TX_CARRIER_EN;
* rmt_tx.tx_config.idle_level = 0;
* rmt_tx.tx_config.idle_output_en = true;
* rmt_tx.rmt_mode = 0;
* rmt_config(&rmt_tx);
*
* //install system RMT driver, disable rx ringbuffer for transmitter.
* rmt_driver_install(rmt_tx.channel, 0, RMT_INTR_NUM);
* }
*
* @endcode
* @code{c}
* //3. set RMT receiver
* void rmt_rx_init()
* {
* rmt_config_t rmt_rx;
* rmt_rx.channel = 1;
* rmt_rx.gpio_num = 19;
* rmt_rx.clk_div = 100;
* rmt_rx.mem_block_num = 1;
* rmt_rx.rmt_mode = RMT_MODE_RX;
* rmt_rx.rx_config.filter_en = true;
* rmt_rx.rx_config.filter_ticks_thresh = 100;
* rmt_rx.rx_config.idle_threshold = 0xffff;
* rmt_config(&rmt_rx);
*
* //install system RMT driver.
* rmt_driver_install(rmt_rx.channel, 1000, RMT_INTR_NUM);
* }
*
* ----------------EXAMPLE OF RMT INTERRUPT ------------------
* @code{c}
*
* rmt_isr_register(RMT_INTR_NUM, rmt_isr, NULL); //hook the ISR handler for RMT interrupt
* @endcode
* @note
* 0. If you have called rmt_driver_install, you don't need to set ISR handler any more.
* 1. the first parameter is INUM, you can pick one form interrupt level 1/2 which is not used by the system.
* 2. user should arrange the INUMs that used, better not to use a same INUM for different interrupt source.
* 3. do not pick the INUM that already occupied by the system.
* 4. refer to soc.h to check which INUMs that can be used.
*
* ----------------EXAMPLE OF INTERRUPT HANDLER ---------------
* @code{c}
* #include "esp_attr.h"
* //we should add 'IRAM_ATTR' attribution when we declare the isr function
* void IRAM_ATTR rmt_isr_handler(void* arg)
* {
* //read RMT interrupt status.
* uint32_t intr_st = RMT.int_st.val;
*
* //you will find which channels have triggered fade_end interrupt here,
* //then, you can post some event to RTOS queue to process the event.
* //later we will add a queue in the driver code.
*
* //clear RMT interrupt status.
* RMT.int_clr.val = intr_st;
* }
* @endcode
*
*--------------------------END OF EXAMPLE --------------------------
*/
#ifdef __cplusplus
}
#endif
#endif /* _DRIVER_RMT_CTRL_H_ */

14
tools/sdk/include/driver/driver/uart.h
View File

@ -167,25 +167,25 @@ esp_err_t uart_get_word_length(uart_port_t uart_num, uart_word_length_t* data_bi
* @brief Set UART stop bits.
*
* @param uart_num UART_NUM_0, UART_NUM_1 or UART_NUM_2
* @param bit_num UART stop bits
* @param stop_bits UART stop bits
*
* @return
* - ESP_OK Success
* - ESP_FAIL Fail
*/
esp_err_t uart_set_stop_bits(uart_port_t uart_num, uart_stop_bits_t bit_num);
esp_err_t uart_set_stop_bits(uart_port_t uart_num, uart_stop_bits_t stop_bits);
/**
* @brief Set UART stop bits.
*
* @param uart_num UART_NUM_0, UART_NUM_1 or UART_NUM_2
* @param stop_bit Pointer to accept value of UART stop bits.
* @param stop_bits Pointer to accept value of UART stop bits.
*
* @return
* - ESP_FAIL Parameter error
* - ESP_OK Success, result will be put in (*stop_bit)
*/
esp_err_t uart_get_stop_bits(uart_port_t uart_num, uart_stop_bits_t* stop_bit);
esp_err_t uart_get_stop_bits(uart_port_t uart_num, uart_stop_bits_t* stop_bits);
/**
* @brief Set UART parity.
@ -216,13 +216,13 @@ esp_err_t uart_get_parity(uart_port_t uart_num, uart_parity_t* parity_mode);
* @brief Set UART baud rate.
*
* @param uart_num UART_NUM_0, UART_NUM_1 or UART_NUM_2
* @param baud_rate UART baud-rate.
* @param baudrate UART baud rate.
*
* @return
* - ESP_FAIL Parameter error
* - ESP_OK Success
*/
esp_err_t uart_set_baudrate(uart_port_t uart_num, uint32_t baud_rate);
esp_err_t uart_set_baudrate(uart_port_t uart_num, uint32_t baudrate);
/**
* @brief Get UART bit-rate.
@ -241,7 +241,7 @@ esp_err_t uart_get_baudrate(uart_port_t uart_num, uint32_t* baudrate);
* @brief Set UART line inverse mode
*
* @param uart_num UART_NUM_0, UART_NUM_1 or UART_NUM_2
* @param inverse_mask Choose the wires that need to be inversed.
* @param inverse_mask Choose the wires that need to be inverted.
* Inverse_mask should be chosen from UART_INVERSE_RXD/UART_INVERSE_TXD/UART_INVERSE_RTS/UART_INVERSE_CTS, combine with OR operation.
*
* @return

37
tools/sdk/include/esp32/esp_deepsleep.h
View File

@ -30,25 +30,34 @@ extern "C" {
*/
/**
* @brief Set the chip to deep-sleep mode.
*
* The device will automatically wake up after the deep-sleep time set
* by the users. Upon waking up, the device boots up from user_init.
*
* @attention The parameter time_in_us to be "uint64" is for further development.
* Only the low 32 bits of parameter time_in_us are avalable now.
*
* @param uint64 time_in_us : deep-sleep time, only the low 32bits are avalable now. unit: microsecond
*
* @return null
*/
void system_deep_sleep(uint64_t time_in_us);
* @brief Enter deep-sleep mode
*
* The device will automatically wake up after the deep-sleep time
* Upon waking up, the device calls deep sleep wake stub, and then proceeds
* to load application.
*
* This function does not return.
*
* @param time_in_us deep-sleep time, unit: microsecond
*/
void esp_deep_sleep(uint64_t time_in_us) __attribute__((noreturn));
/**
* @brief Enter deep-sleep mode
*
* Function has been renamed to esp_deep_sleep.
* This name is deprecated and will be removed in a future version.
*
* @param time_in_us deep-sleep time, unit: microsecond
*/
void system_deep_sleep(uint64_t time_in_us) __attribute__((noreturn, deprecated));
/**
* @brief Default stub to run on wake from deep sleep.
*
* Allows for executing code immediately on wake from sleep, before
* the software bootloader or esp-idf app has started up.
* the software bootloader or ESP-IDF app has started up.
*
* This function is weak-linked, so you can implement your own version
* to run code immediately when the chip wakes from

8
tools/sdk/include/esp32/esp_event.h
View File

@ -44,6 +44,7 @@ typedef enum {
SYSTEM_EVENT_AP_STACONNECTED, /**< a station connected to ESP32 soft-AP */
SYSTEM_EVENT_AP_STADISCONNECTED, /**< a station disconnected from ESP32 soft-AP */
SYSTEM_EVENT_AP_PROBEREQRECVED, /**< Receive probe request packet in soft-AP interface */
SYSTEM_EVENT_AP_STA_GOT_IP6, /**< ESP32 station or ap interface v6IP addr is preferred */
SYSTEM_EVENT_MAX
} system_event_id_t;
@ -79,7 +80,11 @@ typedef struct {
typedef struct {
uint8_t pin_code[8]; /**< PIN code of station in enrollee mode */
}system_event_sta_wps_er_pin_t;
} system_event_sta_wps_er_pin_t;
typedef struct {
tcpip_adapter_ip6_info_t ip6_info;
} system_event_ap_sta_got_ip6_t;
typedef struct {
uint8_t mac[6]; /**< MAC address of the station connected to ESP32 soft-AP */
@ -106,6 +111,7 @@ typedef union {
system_event_ap_staconnected_t sta_connected; /**< a station connected to ESP32 soft-AP */
system_event_ap_stadisconnected_t sta_disconnected; /**< a station disconnected to ESP32 soft-AP */
system_event_ap_probe_req_rx_t ap_probereqrecved; /**< ESP32 soft-AP receive probe request packet */
system_event_ap_sta_got_ip6_t got_ip6; /**< ESP32 station or ap ipv6 addr state change to preferred */
} system_event_info_t;
typedef struct {

120
tools/sdk/include/esp32/esp_intr.h
View File

@ -82,126 +82,6 @@ extern "C" {
#define ESP_INTR_DISABLE(inum) \
xt_ints_off((1<<inum))
#define ESP_CCOMPARE_INTR_ENBALE() \
ESP_INTR_ENABLE(ETS_CCOMPARE_INUM)
#define ESP_CCOMPARE_INTR_DISBALE() \
ESP_INTR_DISABLE(ETS_CCOMPARE_INUM)
#define ESP_SPI1_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_SPI1_INUM)
#define ESP_SPI1_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_SPI1_INUM)
#define ESP_SPI2_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_SPI2_INUM)
#define ESP_PWM_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_PWM_INUM)
#define ESP_PWM_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_PWM_INUM)
#define ESP_SPI2_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_SPI2_INUM)
#define ESP_SPI3_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_SPI3_INUM)
#define ESP_SPI3_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_SPI3_INUM)
#define ESP_I2S0_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_I2S0_INUM)
#define ESP_I2S0_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_I2S0_INUM)
#define ESP_I2S1_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_I2S1_INUM)
#define ESP_I2S1_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_I2S1_INUM)
#define ESP_MPWM_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_MPWM_INUM)
#define ESP_EPWM_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_EPWM_INUM)
#define ESP_MPWM_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_MPWM_INUM)
#define ESP_EPWM_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_EPWM_INUM)
#define ESP_BB_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_BB_INUM)
#define ESP_BB_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_BB_INUM)
#define ESP_UART0_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_UART0_INUM)
#define ESP_UART0_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_UART0_INUM)
#define ESP_LEDC_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_LEDC_INUM)
#define ESP_LEDC_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_LEDC_INUM)
#define ESP_GPIO_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_GPIO_INUM)
#define ESP_GPIO_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_GPIO_INUM)
#define ESP_WDT_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_WDT_INUM)
#define ESP_WDT_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_WDT_INUM)
#define ESP_FRC1_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_FRC_TIMER1_INUM)
#define ESP_FRC1_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_FRC_TIMER1_INUM)
#define ESP_FRC2_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_FRC_TIMER2_INUM)
#define ESP_FRC2_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_FRC_TIMER2_INUM)
#define ESP_RTC_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_RTC_INUM)
#define ESP_RTC_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_RTC_INUM)
#define ESP_SLC_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_SLC_INUM)
#define ESP_SLC_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_SLC_INUM)
#define ESP_PCNT_INTR_ENABLE() \
ESP_INTR_ENABLE(ETS_PCNT_INUM)
#define ESP_PCNT_INTR_DISABLE() \
ESP_INTR_DISABLE(ETS_PCNT_INUM)
#define ESP_RMT_CTRL_ENABLE() \
ESP_INTR_ENABLE(ETS_RMT_CTRL_INUM)
#define ESP_RMT_CTRL_DIABLE() \
ESP_INTR_DISABLE(ETS_RMT_CTRL_INUM)
#ifdef __cplusplus
}
#endif

249
tools/sdk/include/esp32/esp_phy_init.h Normal file
View File

@ -0,0 +1,249 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include "esp_err.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @file PHY init parameters and API
*/
/**
* @brief Structure holding PHY init parameters
*/
typedef struct {
uint8_t param_ver_id; /*!< init_data structure version */
uint8_t crystal_select; /*!< 0: 40MHz, 1: 26 MHz, 2: 24 MHz, 3: auto */
uint8_t wifi_rx_gain_swp_step_1; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_2; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_3; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_4; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_5; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_6; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_7; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_8; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_9; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_10; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_11; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_12; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_13; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_14; /*!< do not change */
uint8_t wifi_rx_gain_swp_step_15; /*!< do not change */
uint8_t bt_rx_gain_swp_step_1; /*!< do not change */
uint8_t bt_rx_gain_swp_step_2; /*!< do not change */
uint8_t bt_rx_gain_swp_step_3; /*!< do not change */
uint8_t bt_rx_gain_swp_step_4; /*!< do not change */
uint8_t bt_rx_gain_swp_step_5; /*!< do not change */
uint8_t bt_rx_gain_swp_step_6; /*!< do not change */
uint8_t bt_rx_gain_swp_step_7; /*!< do not change */
uint8_t bt_rx_gain_swp_step_8; /*!< do not change */
uint8_t bt_rx_gain_swp_step_9; /*!< do not change */
uint8_t bt_rx_gain_swp_step_10; /*!< do not change */
uint8_t bt_rx_gain_swp_step_11; /*!< do not change */
uint8_t bt_rx_gain_swp_step_12; /*!< do not change */
uint8_t bt_rx_gain_swp_step_13; /*!< do not change */
uint8_t bt_rx_gain_swp_step_14; /*!< do not change */
uint8_t bt_rx_gain_swp_step_15; /*!< do not change */
uint8_t gain_cmp_1; /*!< do not change */
uint8_t gain_cmp_6; /*!< do not change */
uint8_t gain_cmp_11; /*!< do not change */
uint8_t gain_cmp_ext2_1; /*!< do not change */
uint8_t gain_cmp_ext2_6; /*!< do not change */
uint8_t gain_cmp_ext2_11; /*!< do not change */
uint8_t gain_cmp_ext3_1; /*!< do not change */
uint8_t gain_cmp_ext3_6; /*!< do not change */
uint8_t gain_cmp_ext3_11; /*!< do not change */
uint8_t gain_cmp_bt_ofs_1; /*!< do not change */
uint8_t gain_cmp_bt_ofs_6; /*!< do not change */
uint8_t gain_cmp_bt_ofs_11; /*!< do not change */
uint8_t target_power_qdb_0; /*!< 78 means target power is 78/4=19.5dbm */
uint8_t target_power_qdb_1; /*!< 76 means target power is 76/4=19dbm */
uint8_t target_power_qdb_2; /*!< 74 means target power is 74/4=18.5dbm */
uint8_t target_power_qdb_3; /*!< 68 means target power is 68/4=17dbm */
uint8_t target_power_qdb_4; /*!< 64 means target power is 64/4=16dbm */
uint8_t target_power_qdb_5; /*!< 52 means target power is 52/4=13dbm */
uint8_t target_power_index_mcs0; /*!< target power index is 0, means target power is target_power_qdb_0 19.5dbm; (1m,2m,5.5m,11m,6m,9m) */
uint8_t target_power_index_mcs1; /*!< target power index is 0, means target power is target_power_qdb_0 19.5dbm; (12m) */
uint8_t target_power_index_mcs2; /*!< target power index is 1, means target power is target_power_qdb_1 19dbm; (18m) */
uint8_t target_power_index_mcs3; /*!< target power index is 1, means target power is target_power_qdb_1 19dbm; (24m) */
uint8_t target_power_index_mcs4; /*!< target power index is 2, means target power is target_power_qdb_2 18.5dbm; (36m) */
uint8_t target_power_index_mcs5; /*!< target power index is 3, means target power is target_power_qdb_3 17dbm; (48m) */
uint8_t target_power_index_mcs6; /*!< target power index is 4, means target power is target_power_qdb_4 16dbm; (54m) */
uint8_t target_power_index_mcs7; /*!< target power index is 5, means target power is target_power_qdb_5 13dbm */
uint8_t pwr_ind_11b_en; /*!< 0: 11b power is same as mcs0 and 6m, 1: 11b power different with OFDM */
uint8_t pwr_ind_11b_0; /*!< 1m, 2m power index [0~5] */
uint8_t pwr_ind_11b_1; /*!< 5.5m, 11m power index [0~5] */
uint8_t chan_backoff_en; /*!< 0: channel backoff disable, 1:channel backoff enable */
uint8_t chan1_power_backoff_qdb; /*!< 4 means backoff is 1db */
uint8_t chan2_power_backoff_qdb; /*!< see chan1_power_backoff_qdb */
uint8_t chan3_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan4_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan5_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan6_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan7_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan8_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan9_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan10_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan11_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan12_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan13_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan14_power_backoff_qdb; /*!< chan1_power_backoff_qdb */
uint8_t chan1_rate_backoff_index; /*!< if bit i is set, backoff data rate is target_power_qdb_i */
uint8_t chan2_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan3_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan4_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan5_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan6_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan7_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan8_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan9_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan10_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan11_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan12_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan13_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t chan14_rate_backoff_index; /*!< see chan1_rate_backoff_index */
uint8_t spur_freq_cfg_msb_1; /*!< first spur: */
uint8_t spur_freq_cfg_1; /*!< spur_freq_cfg = (spur_freq_cfg_msb_1 <<8) | spur_freq_cfg_1 */
uint8_t spur_freq_cfg_div_1; /*!< spur_freq=spur_freq_cfg/spur_freq_cfg_div_1 */
uint8_t spur_freq_en_h_1; /*!< the seventh bit for total enable */
uint8_t spur_freq_en_l_1; /*!< each bit for 1 channel, and use [spur_freq_en_h, spur_freq_en_l] to select the spur's channel priority */
uint8_t spur_freq_cfg_msb_2; /*!< second spur: */
uint8_t spur_freq_cfg_2; /*!< spur_freq_cfg = (spur_freq_cfg_msb_2 <<8) | spur_freq_cfg_2 */
uint8_t spur_freq_cfg_div_2; /*!< spur_freq=spur_freq_cfg/spur_freq_cfg_div_2 */
uint8_t spur_freq_en_h_2; /*!< the seventh bit for total enable */
uint8_t spur_freq_en_l_2; /*!< each bit for 1 channel, and use [spur_freq_en_h, spur_freq_en_l] to select the spur's channel priority */
uint8_t spur_freq_cfg_msb_3; /*!< third spur: */
uint8_t spur_freq_cfg_3; /*!< spur_freq_cfg = (spur_freq_cfg_msb_3 <<8) | spur_freq_cfg_3 */
uint8_t spur_freq_cfg_div_3; /*!< spur_freq=spur_freq_cfg/spur_freq_cfg_div_3 */
uint8_t spur_freq_en_h_3; /*!< the seventh bit for total enable */
uint8_t spur_freq_en_l_3; /*!< each bit for 1 channel, and use [spur_freq_en_h, spur_freq_en_l] to select the spur's channel priority, */
uint8_t reserved[23]; /*!< reserved for future expansion */
} esp_phy_init_data_t;
/**
* @brief Opaque PHY calibration data
*/
typedef struct {
uint8_t opaque[1904]; /*!< calibration data */
} esp_phy_calibration_data_t;
typedef enum {
PHY_RF_CAL_PARTIAL = 0x00000000, /*!< Do part of RF calibration. This should be used after power-on reset. */
PHY_RF_CAL_NONE = 0x00000001, /*!< Don't do any RF calibration. This mode is only suggested to be used after deep sleep reset. */
PHY_RF_CAL_FULL = 0x00000002 /*!< Do full RF calibration. Produces best results, but also consumes a lot of time and current. Suggested to be used once. */
} esp_phy_calibration_mode_t;
/**
* @brief Get PHY init data
*
* If "Use a partition to store PHY init data" option is set in menuconfig,
* This function will load PHY init data from a partition. Otherwise,
* PHY init data will be compiled into the application itself, and this function
* will return a pointer to PHY init data located in read-only memory (DROM).
*
* If "Use a partition to store PHY init data" option is enabled, this function
* may return NULL if the data loaded from flash is not valid.
*
* @note Call esp_phy_release_init_data to release the pointer obtained using
* this function after the call to esp_wifi_init.
*
* @return pointer to PHY init data structure
*/
const esp_phy_init_data_t* esp_phy_get_init_data();
/**
* @brief Release PHY init data
* @param data pointer to PHY init data structure obtained from
* esp_phy_get_init_data function
*/
void esp_phy_release_init_data(const esp_phy_init_data_t* data);
/**
* @brief Function called by esp_phy_init to load PHY calibration data
*
* This is a convenience function which can be used to load PHY calibration
* data from NVS. Data can be stored to NVS using esp_phy_store_cal_data_to_nvs
* function.
*
* If calibration data is not present in the NVS, or
* data is not valid (was obtained for a chip with a different MAC address,
* or obtained for a different version of software), this function will
* return an error.
*
* If "Initialize PHY in startup code" option is set in menuconfig, this
* function will be used to load calibration data. To provide a different
* mechanism for loading calibration data, disable
* "Initialize PHY in startup code" option in menuconfig and call esp_phy_init
* function from the application. For an example usage of esp_phy_init and
* this function, see do_phy_init function in cpu_start.c
*
* @param out_cal_data pointer to calibration data structure to be filled with
* loaded data.
* @return ESP_OK on success
*/
esp_err_t esp_phy_load_cal_data_from_nvs(esp_phy_calibration_data_t* out_cal_data);
/**
* @brief Function called by esp_phy_init to store PHY calibration data
*
* This is a convenience function which can be used to store PHY calibration
* data to the NVS. Calibration data is returned by esp_phy_init function.
* Data saved using this function to the NVS can later be loaded using
* esp_phy_store_cal_data_to_nvs function.
*
* If "Initialize PHY in startup code" option is set in menuconfig, this
* function will be used to store calibration data. To provide a different
* mechanism for storing calibration data, disable
* "Initialize PHY in startup code" option in menuconfig and call esp_phy_init
* function from the application.
*
* @param cal_data pointer to calibration data which has to be saved.
* @return ESP_OK on success
*/
esp_err_t esp_phy_store_cal_data_to_nvs(const esp_phy_calibration_data_t* cal_data);
/**
* @brief Initialize PHY module
*
* PHY module should be initialized in order to use WiFi or BT.
* If "Initialize PHY in startup code" option is set in menuconfig,
* this function will be called automatically before app_main is called,
* using parameters obtained from esp_phy_get_init_data.
*
* Applications which don't need to enable PHY on every start up should
* disable this menuconfig option and call esp_phy_init before calling
* esp_wifi_init or bt_controller_init. See do_phy_init function in
* cpu_start.c for an example of using this function.
*
* @param init_data PHY parameters. Default set of parameters can
* be obtained by calling esp_phy_get_default_init_data
* function.
* @param mode Calibration mode (Full, partial, or no calibration)
* @param[inout] calibration_data
* @return ESP_OK on success.
*/
esp_err_t esp_phy_init(const esp_phy_init_data_t* init_data,
esp_phy_calibration_mode_t mode, esp_phy_calibration_data_t* calibration_data);
#ifdef __cplusplus
}
#endif

175
tools/sdk/include/esp32/esp_system.h
View File

@ -16,7 +16,7 @@
#define __ESP_SYSTEM_H__
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "esp_deepsleep.h"
@ -24,166 +24,107 @@
extern "C" {
#endif
/** \defgroup System_APIs System APIs
* @brief System APIs
*/
/** @addtogroup System_APIs
* @{
*/
/**
* @attention application don't need to call this function anymore. It do nothing and will
* be removed in future version.
*/
void system_init(void) __attribute__ ((deprecated));
/**
* @brief Get information of the SDK version.
*
* @param null
*
* @return Information of the SDK version.
*/
const char *system_get_sdk_version(void);
/**
* @brief Reset to default settings.
*
* Reset to default settings of the following APIs : wifi_station_set_auto_connect,
* wifi_set_phy_mode, wifi_softap_set_config related, wifi_station_set_config
* related, and wifi_set_opmode.
*
* @param null
*
* @return null
* Function has been deprecated, please use esp_wifi_restore instead.
* This name will be removed in a future release.
*/
void system_restore(void);
void system_restore(void) __attribute__ ((deprecated));
/**
* @brief Restart PRO and APP CPUs.
*
* This function can be called both from PRO and APP CPUs.
* After successful restart, CPU reset reason will be SW_CPU_RESET.
* Peripherals (except for WiFi, BT, UART0, SPI1, and legacy timers) are not reset.
* This function does not return.
*/
void esp_restart(void) __attribute__ ((noreturn));
/**
* @brief Restart system.
*
* @param null
*
* @return null
* Function has been renamed to esp_restart.
* This name will be removed in a future release.
*/
void system_restart(void);
void system_restart(void) __attribute__ ((deprecated, noreturn));
/**
* @brief Get system time, unit: microsecond.
*
* @param null
*
* @return System time, unit: microsecond.
* This function is deprecated. Use 'gettimeofday' function for 64-bit precision.
* This definition will be removed in a future release.
*/
uint32_t system_get_time(void);
uint32_t system_get_time(void) __attribute__ ((deprecated));
/**
* @brief Get the size of available heap.
*
* @param null
* Note that the returned value may be larger than the maximum contiguous block
* which can be allocated.
*
* @return Available heap size.
* @return Available heap size, in bytes.
*/
uint32_t system_get_free_heap_size(void);
uint32_t esp_get_free_heap_size(void);
/**
* @brief Get RTC time, unit: RTC clock cycle.
* @brief Get the size of available heap.
*
* @param null
* Function has been renamed to esp_get_free_heap_size.
* This name will be removed in a future release.
*
* @return RTC time.
* @return Available heap size, in bytes.
*/
uint64_t system_get_rtc_time(void);
uint32_t system_get_free_heap_size(void) __attribute__ ((deprecated));
/**
* @brief Read user data from the RTC memory.
*
* The user data segment (1024 bytes, as shown below) is used to store user data.
*
* |<---- system data(512 bytes) ---->|<----------- user data(1024 bytes) --------->|
*
* @attention Read and write unit for data stored in the RTC memory is 4 bytes.
* @attention src_addr is the block number (4 bytes per block). So when reading data
* at the beginning of the user data segment, src_addr will be 512/4 = 128,
* n will be data length.
*
* @param uint16 src : source address of rtc memory, src_addr >= 128
* @param void *dst : data pointer
* @param uint16 n : data length, unit: byte
*
* @return true : succeed
* @return false : fail
*/
bool system_rtc_mem_read(uint16_t src, void *dst, uint16_t n);
/**
* @brief Write user data to the RTC memory.
*
* During deep-sleep, only RTC is working. So users can store their data
* in RTC memory if it is needed. The user data segment below (1024 bytes)
* is used to store the user data.
*
* |<---- system data(512 bytes) ---->|<----------- user data(1024 bytes) --------->|
*
* @attention Read and write unit for data stored in the RTC memory is 4 bytes.
* @attention src_addr is the block number (4 bytes per block). So when storing data
* at the beginning of the user data segment, src_addr will be 512/4 = 128,
* n will be data length.
*
* @param uint16 src : source address of rtc memory, src_addr >= 128
* @param void *dst : data pointer
* @param uint16 n : data length, unit: byte
*
* @return true : succeed
* @return false : fail
*/
bool system_rtc_mem_write(uint16_t dst, const void *src, uint16_t n);
/** \defgroup System_boot_APIs Boot APIs
* @brief boot APIs
*/
/** @addtogroup System_boot_APIs
* @{
*/
/**
* @}
*/
/** \defgroup Hardware_MAC_APIs Hardware MAC APIs
* @brief Hardware MAC address APIs
*
* In WiFi MAC, only ESP32 station MAC is the hardware MAC, ESP32 softAP MAC is a software MAC
* calculated from ESP32 station MAC.
* So users need to call wifi_get_macaddr to query the ESP32 softAP MAC if ESP32 station MAC changed.
*
*/
/** @addtogroup Hardware_MAC_APIs
* @{
*/
* @brief Get one random 32-bit word from hardware RNG
*
* @return random value between 0 and UINT32_MAX
*/
uint32_t esp_random(void);
/**
* @brief Read hardware MAC address.
*
* @param uint8 mac[6] : the hardware MAC address, length: 6 bytes.
* In WiFi MAC, only ESP32 station MAC is the hardware MAC, ESP32 softAP MAC is a software MAC
* calculated from ESP32 station MAC.
* So users need to call esp_wifi_get_macaddr to query the ESP32 softAP MAC if ESP32 station MAC changed.
*
* @return esp_err_t
* @param mac hardware MAC address, length: 6 bytes.
*
* @return ESP_OK on success
*/
esp_err_t system_efuse_read_mac(uint8_t mac[6]);
esp_err_t esp_efuse_read_mac(uint8_t* mac);
/**
* @}
* @brief Read hardware MAC address.
*
* Function has been renamed to esp_efuse_read_mac.
* This name will be removed in a future release.
*
* @param mac hardware MAC address, length: 6 bytes.
* @return ESP_OK on success
*/
esp_err_t system_efuse_read_mac(uint8_t mac[6]) __attribute__ ((deprecated));
/**
* @}
*/
* Get SDK version
*
* This function is deprecated and will be removed in a future release.
*
* @return constant string "master"
*/
const char* system_get_sdk_version(void) __attribute__ ((deprecated));
#ifdef __cplusplus
}

48
tools/sdk/include/esp32/esp_types.h
View File

@ -22,52 +22,4 @@
#include <stdbool.h>
#include <stddef.h>
#define __ATTRIB_PACK __attribute__ ((packed))
#define __ATTRIB_PRINTF __attribute__ ((format (printf, 1, 2)))
#define __ATTRIB_NORETURN __attribute__ ((noreturn))
#define __ATTRIB_ALIGN(x) __attribute__ ((aligned((x))))
#define INLINE __inline__
#define LOCAL static
/* probably should not put STATUS here */
typedef enum {
OK = 0,
FAIL,
PENDING,
BUSY,
CANCEL,
} STATUS;
//#define _LITTLE_ENDIAN 1234
//#define _BYTE_ORDER == _LITTLE_ENDIAN
#define ASSERT( x ) do { \
if (!(x)) { \
printf("%s %u\n", __FILE__, __LINE__); \
while (1) { \
asm volatile("nop"); \
}; \
} \
} while (0)
/* #if __GNUC_PREREQ__(4, 1) */
#ifndef __GNUC__
#if 1
#define __offsetof(type, field) __builtin_offsetof(type, field)
#else
#define __offsetof(type, field) ((size_t)(&((type *)0)->field))
#endif
#endif /* __GNUC__ */
/* Macros for counting and rounding. */
#ifndef howmany
#define howmany(x, y) (((x)+((y)-1))/(y))
#endif
#define container_of(ptr, type, member) ({ \
const typeof( ((type *)0)->member ) *__mptr = (ptr); \
(type *)( (char *)__mptr - __offsetof(type,member) );})
#endif /* __ESP_TYPES_H__ */

15
tools/sdk/include/esp32/esp_wifi.h
View File

@ -186,6 +186,21 @@ esp_err_t esp_wifi_start(void);
*/
esp_err_t esp_wifi_stop(void);
/**
* @brief Restore WiFi stack persistent settings to default values
*
* This function will reset settings made using the following APIs:
* - esp_wifi_get_auto_connect,
* - esp_wifi_set_protocol,
* - esp_wifi_set_config related
* - esp_wifi_set_mode
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by eps_wifi_init
*/
esp_err_t esp_wifi_restore(void);
/**
* @brief Connect the ESP32 WiFi station to the AP.
*

22
tools/sdk/include/esp32/esp_wifi_internal.h
View File

@ -43,10 +43,9 @@ extern "C" {
/**
* @brief get whether the wifi driver is allowed to transmit data or not
*
* @param none
*
* @return true : upper layer should stop to transmit data to wifi driver
* @return false : upper layer can transmit data to wifi driver
* @return
* - true : upper layer should stop to transmit data to wifi driver
* - false : upper layer can transmit data to wifi driver
*/
bool esp_wifi_internal_tx_is_stop(void);
@ -54,8 +53,6 @@ bool esp_wifi_internal_tx_is_stop(void);
* @brief free the rx buffer which allocated by wifi driver
*
* @param void* buffer: rx buffer pointer
*
* @return nonoe
*/
void esp_wifi_internal_free_rx_buffer(void* buffer);
@ -78,7 +75,6 @@ int esp_wifi_internal_tx(wifi_interface_t wifi_if, void *buffer, u16_t len);
* @brief The WiFi RX callback function
*
* Each time the WiFi need to forward the packets to high layer, the callback function will be called
*
*/
typedef esp_err_t (*wifi_rxcb_t)(void *buffer, uint16_t len, void *eb);
@ -90,18 +86,18 @@ typedef esp_err_t (*wifi_rxcb_t)(void *buffer, uint16_t len, void *eb);
* @param wifi_interface_t ifx : interface
* @param wifi_rxcb_t fn : WiFi RX callback
*
* @return ESP_OK : succeed
* @return others : fail
* @return
* - ESP_OK : succeed
* - others : fail
*/
esp_err_t esp_wifi_internal_reg_rxcb(wifi_interface_t ifx, wifi_rxcb_t fn);
/**
* @brief Notify WIFI driver that the station got ip successfully
*
* @param none
*
* @return ESP_OK : succeed
* @return others : fail
* @return
* - ESP_OK : succeed
* - others : fail
*/
esp_err_t esp_wifi_internal_set_sta_ip(void);

8
tools/sdk/include/esp32/rom/ets_sys.h
View File

@ -605,6 +605,14 @@ void intr_matrix_set(int cpu_no, uint32_t model_num, uint32_t intr_num);
#define ETS_MEM_BAR() asm volatile ( "" : : : "memory" )
typedef enum {
OK = 0,
FAIL,
PENDING,
BUSY,
CANCEL,
} STATUS;
/**
* @}
*/

1
tools/sdk/include/esp32/rom/uart.h
View File

@ -17,6 +17,7 @@
#include "esp_types.h"
#include "esp_attr.h"
#include "ets_sys.h"
#ifdef __cplusplus
extern "C" {

21
tools/sdk/include/esp32/soc/cpu.h
View File

@ -51,7 +51,10 @@ static inline void cpu_write_itlb(unsigned vpn, unsigned attr)
asm volatile ("witlb %1, %0; isync\n" :: "r" (vpn), "r" (attr));
}
/* Make page 0 access raise an exception.
/**
* @brief Configure memory region protection
*
* Make page 0 access raise an exception.
* Also protect some other unused pages so we can catch weirdness.
* Useful attribute values:
* 0 — cached, RW
@ -70,9 +73,7 @@ static inline void cpu_configure_region_protection()
cpu_write_itlb(0x20000000, 0);
}
/*
/**
* @brief Set CPU frequency to the value defined in menuconfig
*
* Called from cpu_start.c, not intended to be called from other places.
@ -81,4 +82,16 @@ static inline void cpu_configure_region_protection()
*/
void esp_set_cpu_freq(void);
/**
* @brief Stall CPU using RTC controller
* @param cpu_id ID of the CPU to stall (0 = PRO, 1 = APP)
*/
void esp_cpu_stall(int cpu_id);
/**
* @brief Un-stall CPU using RTC controller
* @param cpu_id ID of the CPU to un-stall (0 = PRO, 1 = APP)
*/
void esp_cpu_unstall(int cpu_id);
#endif

1
tools/sdk/include/esp32/soc/dport_reg.h
View File

@ -1028,6 +1028,7 @@
#define DPORT_WIFI_RST_EN_REG (DR_REG_DPORT_BASE + 0x0D0)
/* DPORT_WIFI_RST : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define DPORT_MAC_RST (BIT(2))
#define DPORT_WIFI_RST 0xFFFFFFFF
#define DPORT_WIFI_RST_M ((DPORT_WIFI_RST_V)<<(DPORT_WIFI_RST_S))
#define DPORT_WIFI_RST_V 0xFFFFFFFF

37
tools/sdk/include/esp32/soc/hwcrypto_reg.h Normal file
View File

@ -0,0 +1,37 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __HWCRYPTO_REG_H__
#define __HWCRYPTO_REG_H__
#include "soc.h"
/* registers for RSA acceleration via Multiple Precision Integer ops */
#define RSA_MEM_M_BLOCK_BASE ((DR_REG_RSA_BASE)+0x000)
/* RB & Z use the same memory block, depending on phase of operation */
#define RSA_MEM_RB_BLOCK_BASE ((DR_REG_RSA_BASE)+0x200)
#define RSA_MEM_Z_BLOCK_BASE ((DR_REG_RSA_BASE)+0x200)
#define RSA_MEM_Y_BLOCK_BASE ((DR_REG_RSA_BASE)+0x400)
#define RSA_MEM_X_BLOCK_BASE ((DR_REG_RSA_BASE)+0x600)
#define RSA_M_DASH_REG (DR_REG_RSA_BASE + 0x800)
#define RSA_MODEXP_MODE_REG (DR_REG_RSA_BASE + 0x804)
#define RSA_START_MODEXP_REG (DR_REG_RSA_BASE + 0x808)
#define RSA_MULT_MODE_REG (DR_REG_RSA_BASE + 0x80c)
#define RSA_MULT_START_REG (DR_REG_RSA_BASE + 0x810)
#define RSA_INTERRUPT_REG (DR_REG_RSA_BASE + 0X814)
#define RSA_CLEAN_ADDR (DR_REG_RSA_BASE + 0X818)
#endif

30
tools/sdk/include/esp32/soc/pcnt_reg.h
View File

@ -1319,6 +1319,36 @@
#define PCNT_CORE_STATUS_U0_M ((PCNT_CORE_STATUS_U0_V)<<(PCNT_CORE_STATUS_U0_S))
#define PCNT_CORE_STATUS_U0_V 0xFFFFFFFF
#define PCNT_CORE_STATUS_U0_S 0
/*0: positive value to zero; 1: negative value to zero; 2: counter value negative ; 3: counter value positive*/
#define PCNT_STATUS_CNT_MODE 0x3
#define PCNT_STATUS_CNT_MODE_M ((PCNT_STATUS_CNT_MODE_V)<<(PCNT_STATUS_CNT_MODE_S))
#define PCNT_STATUS_CNT_MODE_V 0x3
#define PCNT_STATUS_CNT_MODE_S 0
/* counter value equals to thresh1*/
#define PCNT_STATUS_THRES1 BIT(2)
#define PCNT_STATUS_THRES1_M BIT(2)
#define PCNT_STATUS_THRES1_V 0x1
#define PCNT_STATUS_THRES1_S 2
/* counter value equals to thresh0*/
#define PCNT_STATUS_THRES0 BIT(3)
#define PCNT_STATUS_THRES0_M BIT(3)
#define PCNT_STATUS_THRES0_V 0x1
#define PCNT_STATUS_THRES0_S 3
/* counter value reaches h_lim*/
#define PCNT_STATUS_L_LIM BIT(4)
#define PCNT_STATUS_L_LIM_M BIT(4)
#define PCNT_STATUS_L_LIM_V 0x1
#define PCNT_STATUS_L_LIM_S 4
/* counter value reaches l_lim*/
#define PCNT_STATUS_H_LIM BIT(5)
#define PCNT_STATUS_H_LIM_M BIT(5)
#define PCNT_STATUS_H_LIM_V 0x1
#define PCNT_STATUS_H_LIM_S 5
/* counter value equals to zero*/
#define PCNT_STATUS_ZERO BIT(6)
#define PCNT_STATUS_ZERO_M BIT(6)
#define PCNT_STATUS_ZERO_V 0x1
#define PCNT_STATUS_ZERO_S 6
#define PCNT_U1_STATUS_REG (DR_REG_PCNT_BASE + 0x0094)
/* PCNT_CORE_STATUS_U1 : RO ;bitpos:[31:0] ;default: 32'h0 ; */

13
tools/sdk/include/esp32/soc/pcnt_struct.h
View File

@ -113,7 +113,18 @@ typedef volatile struct {
};
uint32_t val;
} int_clr;
uint32_t status_unit[8];
union {
struct {
uint32_t cnt_mode:2; /*0: positive value to zero; 1: negative value to zero; 2: counter value negative ; 3: counter value positive*/
uint32_t thres1_lat:1; /* counter value equals to thresh1*/
uint32_t thres0_lat:1; /* counter value equals to thresh0*/
uint32_t l_lim_lat:1; /* counter value reaches h_lim*/
uint32_t h_lim_lat:1; /* counter value reaches l_lim*/
uint32_t zero_lat:1; /* counter value equals zero*/
uint32_t reserved7:25;
};
uint32_t val;
} status_unit[8];
union {
struct {
uint32_t cnt_rst_u0: 1; /*Set this bit to clear unit0's counter.*/

3
tools/sdk/include/esp32/soc/rmt_reg.h
View File

@ -2163,7 +2163,8 @@
#define RMT_DATE_V 0xFFFFFFFF
#define RMT_DATE_S 0
/* RMT memory block address */
#define RMT_CHANNEL_MEM(i) (DR_REG_RMT_BASE + 0x800 + 64 * 4 * (i))
#endif /*_SOC_RMT_REG_H_ */

35
tools/sdk/include/esp32/soc/rmt_struct.h
View File

@ -226,18 +226,35 @@ typedef volatile struct {
} rmt_dev_t;
extern rmt_dev_t RMT;
//Allow access to RMT memory using RMTMEM.chan[0].data[8]
typedef struct {
union {
struct {
uint32_t duration0 :15;
uint32_t level0 :1;
uint32_t duration1 :15;
uint32_t level1 :1;
};
uint32_t val;
};
} rmt_item32_t;
typedef struct {
union {
struct {
uint16_t duration :15;
uint16_t level :1;
};
uint16_t val;
};
} rmt_item16_t;
//Allow access to RMT memory using RMTMEM.chan[0].data32[8]
typedef volatile struct {
struct {
union {
struct {
uint32_t duration0: 15;
uint32_t level0: 1;
uint32_t duration1: 15;
uint32_t level1: 1;
};
uint32_t val;
} data[64];
rmt_item32_t data32[64];
rmt_item16_t data16[128];
};
} chan[8];
} rmt_mem_t;
extern rmt_mem_t RMTMEM;

5
tools/sdk/include/esp32/soc/soc.h
View File

@ -129,10 +129,10 @@
//}}
//Periheral Clock {{
#define APB_CLK_FREQ_ROM 26*1000000
#define APB_CLK_FREQ_ROM ( 26*1000000 )
#define CPU_CLK_FREQ_ROM APB_CLK_FREQ_ROM
#define CPU_CLK_FREQ APB_CLK_FREQ
#define APB_CLK_FREQ 80*1000000 //unit: Hz
#define APB_CLK_FREQ ( 80*1000000 ) //unit: Hz
#define UART_CLK_FREQ APB_CLK_FREQ
#define WDT_CLK_FREQ APB_CLK_FREQ
#define TIMER_CLK_FREQ (80000000>>4) //80MHz divided by 16
@ -141,6 +141,7 @@
//}}
#define DR_REG_DPORT_BASE 0x3ff00000
#define DR_REG_RSA_BASE 0x3ff02000
#define DR_REG_UART_BASE 0x3ff40000
#define DR_REG_SPI1_BASE 0x3ff42000
#define DR_REG_SPI0_BASE 0x3ff43000

18
tools/sdk/include/esp32/soc/wdev_reg.h Normal file
View File

@ -0,0 +1,18 @@
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
/* Hardware random number generator register */
#define WDEV_RND_REG 0x60035144

2
tools/sdk/include/esp32/xtensa/core-macros.h
View File

@ -42,7 +42,7 @@
* share the name with the existing functions from hal.h.
* Including this header file will define XTHAL_USE_CACHE_MACROS
* which directs hal.h not to use the functions.
*
*/
/*
* Single-cache-line operations in C-callable inline assembly.

12
tools/sdk/include/freertos/freertos/FreeRTOS.h
View File

@ -895,7 +895,8 @@ typedef struct xSTATIC_TCB
uint32_t ulDummy18;
uint32_t ucDummy19;
#endif
#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
#if( ( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) \
|| ( portUSING_MPU_WRAPPERS == 1 ) )
uint8_t uxDummy20;
#endif
@ -927,7 +928,6 @@ typedef struct xSTATIC_QUEUE
StaticList_t xDummy3[ 2 ];
UBaseType_t uxDummy4[ 3 ];
BaseType_t ucDummy5[ 2 ];
#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
uint8_t ucDummy6;
@ -943,12 +943,12 @@ typedef struct xSTATIC_QUEUE
#endif
struct {
volatile uint32_t mux;
volatile uint32_t ucDummy10;
#ifdef CONFIG_FREERTOS_PORTMUX_DEBUG
const char *lastLockedFn;
int lastLockedLine;
void *pvDummy8;
UBaseType_t uxDummy11;
#endif
} mux;
} sDummy12;
} StaticQueue_t;
typedef StaticQueue_t StaticSemaphore_t;

3
tools/sdk/include/freertos/freertos/FreeRTOSConfig.h
View File

@ -108,6 +108,7 @@
/* configASSERT behaviour */
#ifndef __ASSEMBLER__
#include <stdlib.h> /* for abort() */
#include "rom/ets_sys.h"
#if defined(CONFIG_FREERTOS_ASSERT_DISABLE)
@ -126,8 +127,6 @@
#endif
#if CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION
#include <stdlib.h>
#include "rom/ets_sys.h"
#define UNTESTED_FUNCTION() { ets_printf("Untested FreeRTOS function %s\r\n", __FUNCTION__); configASSERT(false); } while(0)
#else
#define UNTESTED_FUNCTION()

13
tools/sdk/include/freertos/freertos/list.h
View File

@ -190,6 +190,10 @@ struct xLIST_ITEM
};
typedef struct xLIST_ITEM ListItem_t; /* For some reason lint wants this as two separate definitions. */
#if __GNUC_PREREQ(4, 6)
_Static_assert(sizeof(StaticListItem_t) == sizeof(ListItem_t), "StaticListItem_t != ListItem_t");
#endif
struct xMINI_LIST_ITEM
{
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
@ -199,6 +203,11 @@ struct xMINI_LIST_ITEM
};
typedef struct xMINI_LIST_ITEM MiniListItem_t;
#if __GNUC_PREREQ(4, 6)
_Static_assert(sizeof(StaticMiniListItem_t) == sizeof(MiniListItem_t), "StaticMiniListItem_t != MiniListItem_t");
#endif
/*
* Definition of the type of queue used by the scheduler.
*/
@ -211,6 +220,10 @@ typedef struct xLIST
listSECOND_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
} List_t;
#if __GNUC_PREREQ(4, 6)
_Static_assert(sizeof(StaticList_t) == sizeof(List_t), "StaticList_t != List_t");
#endif
/*
* Access macro to set the owner of a list item. The owner of a list item
* is the object (usually a TCB) that contains the list item.

3
tools/sdk/include/log/esp_log.h
View File

@ -18,10 +18,7 @@
#include <stdint.h>
#include <stdarg.h>
#include "sdkconfig.h"
#ifdef BOOTLOADER_BUILD
#include <rom/ets_sys.h>
#endif
#ifdef __cplusplus
extern "C" {

5
tools/sdk/include/lwip/lwip/autoip.h
View File

@ -68,8 +68,13 @@ extern "C" {
#define ANNOUNCE_NUM 2 /* (number of announcement packets) */
#define ANNOUNCE_INTERVAL 2 /* seconds (time between announcement packets) */
#define ANNOUNCE_WAIT 2 /* seconds (delay before announcing) */
#if CONFIG_MDNS
#define MAX_CONFLICTS 9 /* (max conflicts before rate limiting) */
#define RATE_LIMIT_INTERVAL 20 /* seconds (delay between successive attempts) */
#else
#define MAX_CONFLICTS 10 /* (max conflicts before rate limiting) */
#define RATE_LIMIT_INTERVAL 60 /* seconds (delay between successive attempts) */
#endif
#define DEFEND_INTERVAL 10 /* seconds (min. wait between defensive ARPs) */
/* AutoIP client states */

4
tools/sdk/include/lwip/lwip/nd6.h
View File

@ -352,6 +352,10 @@ err_t nd6_queue_packet(s8_t neighbor_index, struct pbuf * p);
void nd6_reachability_hint(const ip6_addr_t * ip6addr);
#endif /* LWIP_ND6_TCP_REACHABILITY_HINTS */
#if ESP_LWIP
/** set nd6 callback when ipv6 addr state pref*/
void nd6_set_cb(struct netif *netif, void (*cb)(struct netif *netif, u8_t ip_index));
#endif
#ifdef __cplusplus
}
#endif

9
tools/sdk/include/lwip/lwip/netif.h
View File

@ -190,11 +190,6 @@ struct netif {
/** pointer to next in linked list */
struct netif *next;
#if ESP_LWIP
//ip_addr_t is changed by marco IPV4, IPV6
ip_addr_t link_local_addr;
#endif
#if LWIP_IPV4
/** IP address configuration in network byte order */
ip_addr_t ip_addr;
@ -207,6 +202,10 @@ struct netif {
/** The state of each IPv6 address (Tentative, Preferred, etc).
* @see ip6_addr.h */
u8_t ip6_addr_state[LWIP_IPV6_NUM_ADDRESSES];
#if ESP_LWIP
void (*ipv6_addr_cb)(struct netif* netif, u8_t ip_idex); /* callback for ipv6 addr states changed */
#endif
#endif /* LWIP_IPV6 */
/** This function is called by the network device driver
* to pass a packet up the TCP/IP stack. */

51
tools/sdk/include/lwip/lwipopts.h
View File

@ -65,8 +65,8 @@
*/
#define SMEMCPY(dst,src,len) memcpy(dst,src,len)
extern unsigned long os_random(void);
#define LWIP_RAND rand
#define LWIP_RAND rand
/*
------------------------------------
---------- Memory options ----------
@ -200,13 +200,35 @@ extern unsigned long os_random(void);
*/
#define LWIP_DHCP 1
#define DHCP_MAXRTX 0
#define DHCP_MAXRTX 0 //(*(volatile uint32*)0x600011E0)
/*
------------------------------------
---------- AUTOIP options ----------
------------------------------------
*/
#if CONFIG_MDNS
/**
* LWIP_AUTOIP==1: Enable AUTOIP module.
*/
#define LWIP_AUTOIP 1
/**
* LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
* the same interface at the same time.
*/
#define LWIP_DHCP_AUTOIP_COOP 1
/**
* LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
* that should be sent before falling back on AUTOIP. This can be set
* as low as 1 to get an AutoIP address very quickly, but you should
* be prepared to handle a changing IP address when DHCP overrides
* AutoIP.
*/
#define LWIP_DHCP_AUTOIP_COOP_TRIES 2
#endif
/*
----------------------------------
---------- SNMP options ----------
@ -308,6 +330,19 @@ extern unsigned long os_random(void);
---------- LOOPIF options ----------
------------------------------------
*/
#if CONFIG_MDNS
/**
* LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
* address equal to the netif IP address, looping them back up the stack.
*/
#define LWIP_NETIF_LOOPBACK 1
/**
* LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
* sending for each netif (0 = disabled)
*/
#define LWIP_LOOPBACK_MAX_PBUFS 8
#endif
/*
------------------------------------
@ -414,6 +449,15 @@ extern unsigned long os_random(void);
*/
#define SO_REUSE CONFIG_LWIP_SO_REUSE
#if CONFIG_MDNS
/**
* SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets
* to all local matches if SO_REUSEADDR is turned on.
* WARNING: Adds a memcpy for every packet if passing to more than one pcb!
*/
#define SO_REUSE_RXTOALL 1
#endif
/*
----------------------------------------
---------- Statistics options ----------
@ -515,6 +559,7 @@ extern unsigned long os_random(void);
/* Enable all Espressif-only options */
#define ESP_LWIP 1
#define ESP_LWIP_ARP 1
#define ESP_PER_SOC_TCP_WND 1
#define ESP_THREAD_SAFE 1
#define ESP_THREAD_SAFE_DEBUG LWIP_DBG_OFF

51
tools/sdk/include/lwip/port/lwipopts.h
View File

@ -65,8 +65,8 @@
*/
#define SMEMCPY(dst,src,len) memcpy(dst,src,len)
extern unsigned long os_random(void);
#define LWIP_RAND rand
#define LWIP_RAND rand
/*
------------------------------------
---------- Memory options ----------
@ -200,13 +200,35 @@ extern unsigned long os_random(void);
*/
#define LWIP_DHCP 1
#define DHCP_MAXRTX 0
#define DHCP_MAXRTX 0 //(*(volatile uint32*)0x600011E0)
/*
------------------------------------
---------- AUTOIP options ----------
------------------------------------
*/
#if CONFIG_MDNS
/**
* LWIP_AUTOIP==1: Enable AUTOIP module.
*/
#define LWIP_AUTOIP 1
/**
* LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
* the same interface at the same time.
*/
#define LWIP_DHCP_AUTOIP_COOP 1
/**
* LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
* that should be sent before falling back on AUTOIP. This can be set
* as low as 1 to get an AutoIP address very quickly, but you should
* be prepared to handle a changing IP address when DHCP overrides
* AutoIP.
*/
#define LWIP_DHCP_AUTOIP_COOP_TRIES 2
#endif
/*
----------------------------------
---------- SNMP options ----------
@ -308,6 +330,19 @@ extern unsigned long os_random(void);
---------- LOOPIF options ----------
------------------------------------
*/
#if CONFIG_MDNS
/**
* LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
* address equal to the netif IP address, looping them back up the stack.
*/
#define LWIP_NETIF_LOOPBACK 1
/**
* LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
* sending for each netif (0 = disabled)
*/
#define LWIP_LOOPBACK_MAX_PBUFS 8
#endif
/*
------------------------------------
@ -414,6 +449,15 @@ extern unsigned long os_random(void);
*/
#define SO_REUSE CONFIG_LWIP_SO_REUSE
#if CONFIG_MDNS
/**
* SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets
* to all local matches if SO_REUSEADDR is turned on.
* WARNING: Adds a memcpy for every packet if passing to more than one pcb!
*/
#define SO_REUSE_RXTOALL 1
#endif
/*
----------------------------------------
---------- Statistics options ----------
@ -515,6 +559,7 @@ extern unsigned long os_random(void);
/* Enable all Espressif-only options */
#define ESP_LWIP 1
#define ESP_LWIP_ARP 1
#define ESP_PER_SOC_TCP_WND 1
#define ESP_THREAD_SAFE 1
#define ESP_THREAD_SAFE_DEBUG LWIP_DBG_OFF

3
tools/sdk/include/mbedtls/aes_alt.h
View File

@ -20,7 +20,6 @@
*
*
*/
#ifndef AES_ALT_H
#define AES_ALT_H
@ -56,4 +55,4 @@ typedef esp_aes_context mbedtls_aes_context;
}
#endif
#endif /* aes.h */
#endif

796
tools/sdk/include/mbedtls/mbedtls/bignum.h
View File

@ -1,722 +1,78 @@
/**
* \file bignum.h
*
* \brief Multi-precision integer library
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_BIGNUM_H
#define MBEDTLS_BIGNUM_H
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_MBEDTLS_BIGNUM_H__
#define __ESP_MBEDTLS_BIGNUM_H__
#include_next "mbedtls/bignum.h"
/**
* This is a wrapper for the main mbedtls/bignum.h. This wrapper
* provides a few additional ESP32-only functions.
*
* This is because we don't set MBEDTLS_BIGNUM_ALT in the same way we
* do for AES, SHA, etc. Because we still use most of the bignum.h
* implementation and just replace a few hardware accelerated
* functions (see MBEDTLS_MPI_EXP_MOD_ALT & MBEDTLS_MPI_MUL_MPI_ALT in
* esp_config.h).
*
* @note Unlike the other hardware accelerator support functions in esp32/hwcrypto, there is no
* generic "hwcrypto/bignum.h" header for using these functions without mbedTLS. The reason for this
* is that all of the function implementations depend strongly upon the mbedTLS MPI implementation.
*/
/**
* @brief Lock access to RSA Accelerator (MPI/bignum operations)
*
* RSA Accelerator hardware unit can only be used by one
* consumer at a time.
*
* @note This function is non-recursive (do not call it twice from the
* same task.)
*
* @note You do not need to call this if you are using the mbedTLS bignum.h
* API or esp_mpi_xxx functions. This function is only needed if you
* want to call ROM RSA functions or access the registers directly.
*
*/
void esp_mpi_acquire_hardware(void);
/**
* @brief Unlock access to RSA Accelerator (MPI/bignum operations)
*
* Has to be called once for each call to esp_mpi_acquire_hardware().
*
* @note You do not need to call this if you are using the mbedTLS bignum.h
* API or esp_mpi_xxx functions. This function is only needed if you
* want to call ROM RSA functions or access the registers directly.
*/
void esp_mpi_release_hardware(void);
/* @brief MPI modular mupltiplication function
*
* Calculates Z = (X * Y) mod M using MPI hardware acceleration.
*
* This is not part of the standard mbedTLS bignum API.
*
* @note All of X, Y & Z should be less than 4096 bit long or an error is returned.
*
* @param Z Result bignum, should be pre-initialised with mbedtls_mpi_init().
* @param X First multiplication argument.
* @param Y Second multiplication argument.
* @param M Modulus value for result.
*
* @return 0 on success, mbedTLS MPI error codes on failure.
*/
int esp_mpi_mul_mpi_mod(mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y, const mbedtls_mpi *M);
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
#if defined(MBEDTLS_FS_IO)
#include <stdio.h>
#endif
#define MBEDTLS_ERR_MPI_FILE_IO_ERROR -0x0002 /**< An error occurred while reading from or writing to a file. */
#define MBEDTLS_ERR_MPI_BAD_INPUT_DATA -0x0004 /**< Bad input parameters to function. */
#define MBEDTLS_ERR_MPI_INVALID_CHARACTER -0x0006 /**< There is an invalid character in the digit string. */
#define MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL -0x0008 /**< The buffer is too small to write to. */
#define MBEDTLS_ERR_MPI_NEGATIVE_VALUE -0x000A /**< The input arguments are negative or result in illegal output. */
#define MBEDTLS_ERR_MPI_DIVISION_BY_ZERO -0x000C /**< The input argument for division is zero, which is not allowed. */
#define MBEDTLS_ERR_MPI_NOT_ACCEPTABLE -0x000E /**< The input arguments are not acceptable. */
#define MBEDTLS_ERR_MPI_ALLOC_FAILED -0x0010 /**< Memory allocation failed. */
#define MBEDTLS_MPI_CHK(f) do { if( ( ret = f ) != 0 ) goto cleanup; } while( 0 )
/*
* Maximum size MPIs are allowed to grow to in number of limbs.
*/
#define MBEDTLS_MPI_MAX_LIMBS 10000
#if !defined(MBEDTLS_MPI_WINDOW_SIZE)
/*
* Maximum window size used for modular exponentiation. Default: 6
* Minimum value: 1. Maximum value: 6.
*
* Result is an array of ( 2 << MBEDTLS_MPI_WINDOW_SIZE ) MPIs used
* for the sliding window calculation. (So 64 by default)
*
* Reduction in size, reduces speed.
*/
#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */
#endif /* !MBEDTLS_MPI_WINDOW_SIZE */
#if !defined(MBEDTLS_MPI_MAX_SIZE)
/*
* Maximum size of MPIs allowed in bits and bytes for user-MPIs.
* ( Default: 512 bytes => 4096 bits, Maximum tested: 2048 bytes => 16384 bits )
*
* Note: Calculations can results temporarily in larger MPIs. So the number
* of limbs required (MBEDTLS_MPI_MAX_LIMBS) is higher.
*/
#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */
#endif /* !MBEDTLS_MPI_MAX_SIZE */
#define MBEDTLS_MPI_MAX_BITS ( 8 * MBEDTLS_MPI_MAX_SIZE ) /**< Maximum number of bits for usable MPIs. */
/*
* When reading from files with mbedtls_mpi_read_file() and writing to files with
* mbedtls_mpi_write_file() the buffer should have space
* for a (short) label, the MPI (in the provided radix), the newline
* characters and the '\0'.
*
* By default we assume at least a 10 char label, a minimum radix of 10
* (decimal) and a maximum of 4096 bit numbers (1234 decimal chars).
* Autosized at compile time for at least a 10 char label, a minimum radix
* of 10 (decimal) for a number of MBEDTLS_MPI_MAX_BITS size.
*
* This used to be statically sized to 1250 for a maximum of 4096 bit
* numbers (1234 decimal chars).
*
* Calculate using the formula:
* MBEDTLS_MPI_RW_BUFFER_SIZE = ceil(MBEDTLS_MPI_MAX_BITS / ln(10) * ln(2)) +
* LabelSize + 6
*/
#define MBEDTLS_MPI_MAX_BITS_SCALE100 ( 100 * MBEDTLS_MPI_MAX_BITS )
#define MBEDTLS_LN_2_DIV_LN_10_SCALE100 332
#define MBEDTLS_MPI_RW_BUFFER_SIZE ( ((MBEDTLS_MPI_MAX_BITS_SCALE100 + MBEDTLS_LN_2_DIV_LN_10_SCALE100 - 1) / MBEDTLS_LN_2_DIV_LN_10_SCALE100) + 10 + 6 )
#if !defined(MBEDTLS_BIGNUM_ALT)
/*
* Define the base integer type, architecture-wise.
*
* 32-bit integers can be forced on 64-bit arches (eg. for testing purposes)
* by defining MBEDTLS_HAVE_INT32 and undefining MBEDTLS_HAVE_ASM
*/
#if ( ! defined(MBEDTLS_HAVE_INT32) && \
defined(_MSC_VER) && defined(_M_AMD64) )
#define MBEDTLS_HAVE_INT64
typedef int64_t mbedtls_mpi_sint;
typedef uint64_t mbedtls_mpi_uint;
#else
#if ( ! defined(MBEDTLS_HAVE_INT32) && \
defined(__GNUC__) && ( \
defined(__amd64__) || defined(__x86_64__) || \
defined(__ppc64__) || defined(__powerpc64__) || \
defined(__ia64__) || defined(__alpha__) || \
(defined(__sparc__) && defined(__arch64__)) || \
defined(__s390x__) || defined(__mips64) ) )
#define MBEDTLS_HAVE_INT64
typedef int64_t mbedtls_mpi_sint;
typedef uint64_t mbedtls_mpi_uint;
/* mbedtls_t_udbl defined as 128-bit unsigned int */
typedef unsigned int mbedtls_t_udbl __attribute__((mode(TI)));
#define MBEDTLS_HAVE_UDBL
#else
#define MBEDTLS_HAVE_INT32
typedef int32_t mbedtls_mpi_sint;
typedef uint32_t mbedtls_mpi_uint;
typedef uint64_t mbedtls_t_udbl;
#define MBEDTLS_HAVE_UDBL
#endif /* !MBEDTLS_HAVE_INT32 && __GNUC__ && 64-bit platform */
#endif /* !MBEDTLS_HAVE_INT32 && _MSC_VER && _M_AMD64 */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief MPI structure
*/
typedef struct
{
int s; /*!< integer sign */
size_t n; /*!< total # of limbs */
mbedtls_mpi_uint *p; /*!< pointer to limbs */
}
mbedtls_mpi;
/**
* \brief Initialize one MPI (make internal references valid)
* This just makes it ready to be set or freed,
* but does not define a value for the MPI.
*
* \param X One MPI to initialize.
*/
void mbedtls_mpi_init( mbedtls_mpi *X );
/**
* \brief Unallocate one MPI
*
* \param X One MPI to unallocate.
*/
void mbedtls_mpi_free( mbedtls_mpi *X );
/**
* \brief Enlarge to the specified number of limbs
*
* \param X MPI to grow
* \param nblimbs The target number of limbs
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_grow( mbedtls_mpi *X, size_t nblimbs );
/**
* \brief Resize down, keeping at least the specified number of limbs
*
* \param X MPI to shrink
* \param nblimbs The minimum number of limbs to keep
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_shrink( mbedtls_mpi *X, size_t nblimbs );
/**
* \brief Copy the contents of Y into X
*
* \param X Destination MPI
* \param Y Source MPI
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_copy( mbedtls_mpi *X, const mbedtls_mpi *Y );
/**
* \brief Swap the contents of X and Y
*
* \param X First MPI value
* \param Y Second MPI value
*/
void mbedtls_mpi_swap( mbedtls_mpi *X, mbedtls_mpi *Y );
/**
* \brief Safe conditional assignement X = Y if assign is 1
*
* \param X MPI to conditionally assign to
* \param Y Value to be assigned
* \param assign 1: perform the assignment, 0: keep X's original value
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
*
* \note This function is equivalent to
* if( assign ) mbedtls_mpi_copy( X, Y );
* except that it avoids leaking any information about whether
* the assignment was done or not (the above code may leak
* information through branch prediction and/or memory access
* patterns analysis).
*/
int mbedtls_mpi_safe_cond_assign( mbedtls_mpi *X, const mbedtls_mpi *Y, unsigned char assign );
/**
* \brief Safe conditional swap X <-> Y if swap is 1
*
* \param X First mbedtls_mpi value
* \param Y Second mbedtls_mpi value
* \param assign 1: perform the swap, 0: keep X and Y's original values
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
*
* \note This function is equivalent to
* if( assign ) mbedtls_mpi_swap( X, Y );
* except that it avoids leaking any information about whether
* the assignment was done or not (the above code may leak
* information through branch prediction and/or memory access
* patterns analysis).
*/
int mbedtls_mpi_safe_cond_swap( mbedtls_mpi *X, mbedtls_mpi *Y, unsigned char assign );
/**
* \brief Set value from integer
*
* \param X MPI to set
* \param z Value to use
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_lset( mbedtls_mpi *X, mbedtls_mpi_sint z );
/**
* \brief Get a specific bit from X
*
* \param X MPI to use
* \param pos Zero-based index of the bit in X
*
* \return Either a 0 or a 1
*/
int mbedtls_mpi_get_bit( const mbedtls_mpi *X, size_t pos );
/**
* \brief Set a bit of X to a specific value of 0 or 1
*
* \note Will grow X if necessary to set a bit to 1 in a not yet
* existing limb. Will not grow if bit should be set to 0
*
* \param X MPI to use
* \param pos Zero-based index of the bit in X
* \param val The value to set the bit to (0 or 1)
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_MPI_BAD_INPUT_DATA if val is not 0 or 1
*/
int mbedtls_mpi_set_bit( mbedtls_mpi *X, size_t pos, unsigned char val );
/**
* \brief Return the number of zero-bits before the least significant
* '1' bit
*
* Note: Thus also the zero-based index of the least significant '1' bit
*
* \param X MPI to use
*/
size_t mbedtls_mpi_lsb( const mbedtls_mpi *X );
/**
* \brief Return the number of bits up to and including the most
* significant '1' bit'
*
* Note: Thus also the one-based index of the most significant '1' bit
*
* \param X MPI to use
*/
size_t mbedtls_mpi_bitlen( const mbedtls_mpi *X );
/**
* \brief Return the total size in bytes
*
* \param X MPI to use
*/
size_t mbedtls_mpi_size( const mbedtls_mpi *X );
/**
* \brief Import from an ASCII string
*
* \param X Destination MPI
* \param radix Input numeric base
* \param s Null-terminated string buffer
*
* \return 0 if successful, or a MBEDTLS_ERR_MPI_XXX error code
*/
int mbedtls_mpi_read_string( mbedtls_mpi *X, int radix, const char *s );
/**
* \brief Export into an ASCII string
*
* \param X Source MPI
* \param radix Output numeric base
* \param buf Buffer to write the string to
* \param buflen Length of buf
* \param olen Length of the string written, including final NUL byte
*
* \return 0 if successful, or a MBEDTLS_ERR_MPI_XXX error code.
* *olen is always updated to reflect the amount
* of data that has (or would have) been written.
*
* \note Call this function with buflen = 0 to obtain the
* minimum required buffer size in *olen.
*/
int mbedtls_mpi_write_string( const mbedtls_mpi *X, int radix,
char *buf, size_t buflen, size_t *olen );
#if defined(MBEDTLS_FS_IO)
/**
* \brief Read X from an opened file
*
* \param X Destination MPI
* \param radix Input numeric base
* \param fin Input file handle
*
* \return 0 if successful, MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if
* the file read buffer is too small or a
* MBEDTLS_ERR_MPI_XXX error code
*/
int mbedtls_mpi_read_file( mbedtls_mpi *X, int radix, FILE *fin );
/**
* \brief Write X into an opened file, or stdout if fout is NULL
*
* \param p Prefix, can be NULL
* \param X Source MPI
* \param radix Output numeric base
* \param fout Output file handle (can be NULL)
*
* \return 0 if successful, or a MBEDTLS_ERR_MPI_XXX error code
*
* \note Set fout == NULL to print X on the console.
*/
int mbedtls_mpi_write_file( const char *p, const mbedtls_mpi *X, int radix, FILE *fout );
#endif /* MBEDTLS_FS_IO */
/**
* \brief Import X from unsigned binary data, big endian
*
* \param X Destination MPI
* \param buf Input buffer
* \param buflen Input buffer size
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_read_binary( mbedtls_mpi *X, const unsigned char *buf, size_t buflen );
/**
* \brief Export X into unsigned binary data, big endian.
* Always fills the whole buffer, which will start with zeros
* if the number is smaller.
*
* \param X Source MPI
* \param buf Output buffer
* \param buflen Output buffer size
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if buf isn't large enough
*/
int mbedtls_mpi_write_binary( const mbedtls_mpi *X, unsigned char *buf, size_t buflen );
/**
* \brief Left-shift: X <<= count
*
* \param X MPI to shift
* \param count Amount to shift
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_shift_l( mbedtls_mpi *X, size_t count );
/**
* \brief Right-shift: X >>= count
*
* \param X MPI to shift
* \param count Amount to shift
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_shift_r( mbedtls_mpi *X, size_t count );
/**
* \brief Compare unsigned values
*
* \param X Left-hand MPI
* \param Y Right-hand MPI
*
* \return 1 if |X| is greater than |Y|,
* -1 if |X| is lesser than |Y| or
* 0 if |X| is equal to |Y|
*/
int mbedtls_mpi_cmp_abs( const mbedtls_mpi *X, const mbedtls_mpi *Y );
/**
* \brief Compare signed values
*
* \param X Left-hand MPI
* \param Y Right-hand MPI
*
* \return 1 if X is greater than Y,
* -1 if X is lesser than Y or
* 0 if X is equal to Y
*/
int mbedtls_mpi_cmp_mpi( const mbedtls_mpi *X, const mbedtls_mpi *Y );
/**
* \brief Compare signed values
*
* \param X Left-hand MPI
* \param z The integer value to compare to
*
* \return 1 if X is greater than z,
* -1 if X is lesser than z or
* 0 if X is equal to z
*/
int mbedtls_mpi_cmp_int( const mbedtls_mpi *X, mbedtls_mpi_sint z );
/**
* \brief Unsigned addition: X = |A| + |B|
*
* \param X Destination MPI
* \param A Left-hand MPI
* \param B Right-hand MPI
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_add_abs( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B );
/**
* \brief Unsigned subtraction: X = |A| - |B|
*
* \param X Destination MPI
* \param A Left-hand MPI
* \param B Right-hand MPI
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_NEGATIVE_VALUE if B is greater than A
*/
int mbedtls_mpi_sub_abs( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B );
/**
* \brief Signed addition: X = A + B
*
* \param X Destination MPI
* \param A Left-hand MPI
* \param B Right-hand MPI
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_add_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B );
/**
* \brief Signed subtraction: X = A - B
*
* \param X Destination MPI
* \param A Left-hand MPI
* \param B Right-hand MPI
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_sub_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B );
/**
* \brief Signed addition: X = A + b
*
* \param X Destination MPI
* \param A Left-hand MPI
* \param b The integer value to add
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_add_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_sint b );
/**
* \brief Signed subtraction: X = A - b
*
* \param X Destination MPI
* \param A Left-hand MPI
* \param b The integer value to subtract
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_sub_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_sint b );
/**
* \brief Baseline multiplication: X = A * B
*
* \param X Destination MPI
* \param A Left-hand MPI
* \param B Right-hand MPI
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_mul_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B );
/**
* \brief Baseline multiplication: X = A * b
*
* \param X Destination MPI
* \param A Left-hand MPI
* \param b The unsigned integer value to multiply with
*
* \note b is unsigned
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_mul_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_uint b );
/**
* \brief Division by mbedtls_mpi: A = Q * B + R
*
* \param Q Destination MPI for the quotient
* \param R Destination MPI for the rest value
* \param A Left-hand MPI
* \param B Right-hand MPI
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if B == 0
*
* \note Either Q or R can be NULL.
*/
int mbedtls_mpi_div_mpi( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, const mbedtls_mpi *B );
/**
* \brief Division by int: A = Q * b + R
*
* \param Q Destination MPI for the quotient
* \param R Destination MPI for the rest value
* \param A Left-hand MPI
* \param b Integer to divide by
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if b == 0
*
* \note Either Q or R can be NULL.
*/
int mbedtls_mpi_div_int( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, mbedtls_mpi_sint b );
/**
* \brief Modulo: R = A mod B
*
* \param R Destination MPI for the rest value
* \param A Left-hand MPI
* \param B Right-hand MPI
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if B == 0,
* MBEDTLS_ERR_MPI_NEGATIVE_VALUE if B < 0
*/
int mbedtls_mpi_mod_mpi( mbedtls_mpi *R, const mbedtls_mpi *A, const mbedtls_mpi *B );
/**
* \brief Modulo: r = A mod b
*
* \param r Destination mbedtls_mpi_uint
* \param A Left-hand MPI
* \param b Integer to divide by
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if b == 0,
* MBEDTLS_ERR_MPI_NEGATIVE_VALUE if b < 0
*/
int mbedtls_mpi_mod_int( mbedtls_mpi_uint *r, const mbedtls_mpi *A, mbedtls_mpi_sint b );
/**
* \brief Sliding-window exponentiation: X = A^E mod N
*
* \param X Destination MPI
* \param A Left-hand MPI
* \param E Exponent MPI
* \param N Modular MPI
* \param _RR Speed-up MPI used for recalculations
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_MPI_BAD_INPUT_DATA if N is negative or even or
* if E is negative
*
* \note _RR is used to avoid re-computing R*R mod N across
* multiple calls, which speeds up things a bit. It can
* be set to NULL if the extra performance is unneeded.
*/
int mbedtls_mpi_exp_mod( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *E, const mbedtls_mpi *N, mbedtls_mpi *_RR );
/**
* \brief Fill an MPI X with size bytes of random
*
* \param X Destination MPI
* \param size Size in bytes
* \param f_rng RNG function
* \param p_rng RNG parameter
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_fill_random( mbedtls_mpi *X, size_t size,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/**
* \brief Greatest common divisor: G = gcd(A, B)
*
* \param G Destination MPI
* \param A Left-hand MPI
* \param B Right-hand MPI
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed
*/
int mbedtls_mpi_gcd( mbedtls_mpi *G, const mbedtls_mpi *A, const mbedtls_mpi *B );
/**
* \brief Modular inverse: X = A^-1 mod N
*
* \param X Destination MPI
* \param A Left-hand MPI
* \param N Right-hand MPI
*
* \return 0 if successful,
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_MPI_BAD_INPUT_DATA if N is negative or nil
MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if A has no inverse mod N
*/
int mbedtls_mpi_inv_mod( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *N );
/**
* \brief Miller-Rabin primality test
*
* \param X MPI to check
* \param f_rng RNG function
* \param p_rng RNG parameter
*
* \return 0 if successful (probably prime),
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if X is not prime
*/
int mbedtls_mpi_is_prime( const mbedtls_mpi *X,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/**
* \brief Prime number generation
*
* \param X Destination MPI
* \param nbits Required size of X in bits
* ( 3 <= nbits <= MBEDTLS_MPI_MAX_BITS )
* \param dh_flag If 1, then (X-1)/2 will be prime too
* \param f_rng RNG function
* \param p_rng RNG parameter
*
* \return 0 if successful (probably prime),
* MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_MPI_BAD_INPUT_DATA if nbits is < 3
*/
int mbedtls_mpi_gen_prime( mbedtls_mpi *X, size_t nbits, int dh_flag,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
#else /* MBEDTLS_BIGNUM_ALT */
#include "bignum_alt.h"
#endif /* MBEDTLS_BIGNUM_ALT */
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_mpi_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* bignum.h */

10
tools/sdk/include/mbedtls/mbedtls/esp_config.h
View File

@ -239,7 +239,9 @@
/* The following units have ESP32 hardware support,
uncommenting each _ALT macro will use the
hardware-accelerated implementation. */
#ifdef CONFIG_MBEDTLS_HARDWARE_AES
#define MBEDTLS_AES_ALT
#endif
/* Currently hardware SHA does not work with TLS handshake,
due to concurrency issue. Internal TW#7111. */
@ -250,11 +252,11 @@
/* The following MPI (bignum) functions have ESP32 hardware support,
Uncommenting these macros will use the hardware-accelerated
implementations.
Disabled as number of limbs limited by bug. Internal TW#7112.
*/
//#define MBEDTLS_MPI_EXP_MOD_ALT
//#define MBEDTLS_MPI_MUL_MPI_ALT
#ifdef CONFIG_MBEDTLS_HARDWARE_MPI
#define MBEDTLS_MPI_EXP_MOD_ALT
#define MBEDTLS_MPI_MUL_MPI_ALT
#endif
/**
* \def MBEDTLS_MD2_PROCESS_ALT

17
tools/sdk/include/mbedtls/sha1_alt.h
View File

@ -1,7 +1,16 @@
/*
* copyright (c) 2010 - 2012 Espressif System
*
*/
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SHA1_ALT_H_
#define _SHA1_ALT_H_

18
tools/sdk/include/mbedtls/sha256_alt.h
View File

@ -1,8 +1,16 @@
/*
* copyright (c) 2010 - 2012 Espressif System
*
*/
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SHA256_ALT_H_
#define _SHA256_ALT_H_
@ -30,4 +38,4 @@ typedef esp_sha_context mbedtls_sha256_context;
}
#endif
#endif /* sha256.h */
#endif

19
tools/sdk/include/mbedtls/sha512_alt.h
View File

@ -1,9 +1,16 @@
/*
* copyright (c) 2010 - 2012 Espressif System
*
* esf Link List Descriptor
*/
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SHA512_ALT_H_
#define _SHA512_ALT_H_
@ -30,4 +37,4 @@ typedef esp_sha_context mbedtls_sha512_context;
}
#endif
#endif /* sha512.h */
#endif

24
tools/sdk/include/nvs_flash/nvs_flash.h
View File

@ -18,27 +18,13 @@
extern "C" {
#endif
/** Initialise NVS flash storage with default flash sector layout
Temporarily, this region is hardcoded as a 12KB (0x3000 byte)
region starting at 36KB (0x9000 byte) offset in flash.
@return ESP_OK if flash was successfully initialised.
*/
/**
* @brief Initialize NVS flash storage with layout given in the partition table.
*
* @return ESP_OK if storage was successfully initialized.
*/
esp_err_t nvs_flash_init(void);
/** Initialise NVS flash storage with custom flash sector layout
@param baseSector Flash sector (units of 4096 bytes) offset to start NVS.
@param sectorCount Length (in flash sectors) of NVS region.
@return ESP_OK if flash was successfully initialised.
@note Use this parameter if you're not using the options in menuconfig for
configuring flash layout & partition table.
*/
esp_err_t nvs_flash_init_custom(uint32_t baseSector, uint32_t sectorCount);
#ifdef __cplusplus
}

7
tools/sdk/include/openssl/internal/ssl_dbg.h
View File

@ -55,16 +55,17 @@
#else
#ifdef SSL_PRINT_LOG
#undef SSL_PRINT_LOG
#define SSL_PRINT_LOG(...)
#endif
#define SSL_PRINT_LOG(...)
#ifdef SSL_ERROR_LOG
#undef SSL_ERROR_LOG
#define SSL_ERROR_LOG(...)
#endif
#define SSL_ERROR_LOG(...)
#ifdef SSL_LOCAL_LOG
#undef SSL_LOCAL_LOG
#define SSL_LOCAL_LOG(...)
#endif
#define SSL_LOCAL_LOG(...)
#endif
#if SSL_DEBUG_LOCATION_ENABLE

2
tools/sdk/include/spi_flash/esp_spi_flash.h
View File

@ -76,6 +76,8 @@ esp_err_t spi_flash_erase_range(size_t start_address, size_t size);
*
* @note Address in flash, dest, has to be 4-byte aligned.
* This is a temporary limitation which will be removed.
* @note If source address is in DROM, this function will return
* ESP_ERR_INVALID_ARG.
*
* @param dest destination address in Flash
* @param src pointer to the source buffer

37
tools/sdk/include/tcpip_adapter/tcpip_adapter.h
View File

@ -64,18 +64,22 @@ typedef struct {
ip4_addr_t gw;
} tcpip_adapter_ip_info_t;
typedef struct {
ip6_addr_t ip;
} tcpip_adapter_ip6_info_t;
typedef dhcps_lease_t tcpip_adapter_dhcps_lease_t;
#if CONFIG_DHCP_STA_LIST
typedef struct {
uint8_t mac[6];
ip4_addr_t ip;
}tcpip_adapter_sta_info_t;
} tcpip_adapter_sta_info_t;
typedef struct {
tcpip_adapter_sta_info_t sta[ESP_WIFI_MAX_CONN_NUM];
int num;
}tcpip_adapter_sta_list_t;
} tcpip_adapter_sta_list_t;
#endif
#endif
@ -211,6 +215,35 @@ esp_err_t tcpip_adapter_get_ip_info(tcpip_adapter_if_t tcpip_if, tcpip_adapter_i
*/
esp_err_t tcpip_adapter_set_ip_info(tcpip_adapter_if_t tcpip_if, tcpip_adapter_ip_info_t *ip_info);
/**
* @brief create interface's linklocal IPv6 information
*
* @note this function will create a linklocal IPv6 address about input interface,
* if this address status changed to preferred, will call event call back ,
* notify user linklocal IPv6 address has been verified
*
* @param[in] tcpip_if: the interface which we want to set IP information
*
*
* @return ESP_OK
* ESP_ERR_TCPIP_ADAPTER_INVALID_PARAMS
*/
esp_err_t tcpip_adapter_create_ip6_linklocal(tcpip_adapter_if_t tcpip_if);
/**
* @brief get interface's linkloacl IPv6 information
*
* There has an IPv6 information copy in adapter library, if interface is up,and IPv6 info
* is preferred,it will get IPv6 linklocal IP successfully
*
* @param[in] tcpip_if: the interface which we want to set IP information
* @param[in] if_ip6: If successful, IPv6 information will be returned in this argument.
*
* @return ESP_OK
* ESP_ERR_TCPIP_ADAPTER_INVALID_PARAMS
*/
esp_err_t tcpip_adapter_get_ip6_linklocal(tcpip_adapter_if_t tcpip_if, ip6_addr_t *if_ip6);
#if 0
esp_err_t tcpip_adapter_get_mac(tcpip_adapter_if_t tcpip_if, uint8_t *mac);

1
tools/sdk/include/wpa_supplicant/endian.h
View File

@ -119,6 +119,7 @@ typedef __uint64_t uint64_t;
#endif /* _BYTE_ORDER == _LITTLE_ENDIAN */
/* Alignment-agnostic encode/decode bytestream to/from little/big endian. */
#define INLINE __inline__
static INLINE uint16_t
be16dec(const void *pp)