diff --git a/README.md b/README.md
index 6c19ebb..a7fda54 100644
--- a/README.md
+++ b/README.md
@@ -11,7 +11,7 @@
 
 ## How to clone ? (READ THIS OR YOU WILL FAIL)
 
-```
+```bash
 git clone --recursive git@github.com:bobbycar-graz/bobbycar-boardcomputer-firmware.git
 cd bobbycar-boardcomputer-firmware/
 ./esp-idf/install.sh
@@ -21,7 +21,7 @@ cd bobbycar-boardcomputer-firmware/
 ## How to compile
 Also do the initialization if you use an IDE, otherwise build will fail.
 
-```
+```bash
 # before you try to build anything, always do this first:
 . export.sh
 
@@ -33,9 +33,17 @@ idf.py -p /dev/ttyUSB0 -b 921600 flash monitor
 
 # flash only app (do this for development as it is much faster)
 idf.py -p /dev/ttyUSB0 -b 921600 app-flash monitor
+
+# alternative commands (After '. export.sh')
+bobby-build # Builds the firmware
+bobby-flash # Flashes the firmware
+bobby-app-flash # Just flashes the app partition
+bobby-monitor # Opens the serial monitor
+bobby-coredump # Opens the coredump-utility
+open-ide # Opens qtcreator
 ```
 
-if you are inside monitor, hit Ctrl+T then Ctrl+X to exit.
+If you are inside monitor, hit Ctrl+T then Ctrl+X to exit.
 
 Hit Ctrl+T then Ctrl+A to reflash the app and return to monitor (very handy during development)