dolphin/Source/Plugins/Plugin_VideoOGL/Src/memcpy_amd.cpp

/******************************************************************************

 Copyright (c) 2001 Advanced Micro Devices, Inc.

 LIMITATION OF LIABILITY:  THE MATERIALS ARE PROVIDED *AS IS* WITHOUT ANY
 EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY,
 NONINFRINGEMENT OF THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY
 PARTICULAR PURPOSE.  IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY
 DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS,
 BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR
 INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY
 OF SUCH DAMAGES.  BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION OR LIMITATION
 OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY
 NOT APPLY TO YOU.

 AMD does not assume any responsibility for any errors which may appear in the
 Materials nor any responsibility to support or update the Materials.  AMD retains
 the right to make changes to its test specifications at any time, without notice.

 NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any
 further information, software, technical information, know-how, or show-how
 available to you.

 So that all may benefit from your experience, please report  any  problems
 or  suggestions about this software to 3dsdk.support@amd.com

 AMD Developer Technologies, M/S 585
 Advanced Micro Devices, Inc.
 5900 E. Ben White Blvd.
 Austin, TX 78741
 3dsdk.support@amd.com
******************************************************************************/

#include <assert.h>

/*****************************************************************************
MEMCPY_AMD.CPP
******************************************************************************/

// Very optimized memcpy() routine for AMD Athlon and Duron family.
// This code uses any of FOUR different basic copy methods, depending
// on the transfer size.
// NOTE:  Since this code uses MOVNTQ (also known as "Non-Temporal MOV" or
// "Streaming Store"), and also uses the software prefetch instructions,
// be sure you're running on Athlon/Duron or other recent CPU before calling!

#define TINY_BLOCK_COPY 64       // upper limit for movsd type copy
// The smallest copy uses the X86 "movsd" instruction, in an optimized
// form which is an "unrolled loop".

#define IN_CACHE_COPY 2 * 1024  // upper limit for movq/movq copy w/SW prefetch
// Next is a copy that uses the MMX registers to copy 8 bytes at a time,
// also using the "unrolled loop" optimization.   This code uses
// the software prefetch instruction to get the data into the cache.

#define UNCACHED_COPY 4 * 1024 // upper limit for movq/movntq w/SW prefetch
// For larger blocks, which will spill beyond the cache, it's faster to
// use the Streaming Store instruction MOVNTQ.   This write instruction
// bypasses the cache and writes straight to main memory.  This code also
// uses the software prefetch instruction to pre-read the data.
// USE 64 * 1024 FOR THIS VALUE IF YOU'RE ALWAYS FILLING A "CLEAN CACHE"

#define BLOCK_PREFETCH_COPY  infinity // no limit for movq/movntq w/block prefetch 
#define CACHEBLOCK 80h // number of 64-byte blocks (cache lines) for block prefetch
// For the largest size blocks, a special technique called Block Prefetch
// can be used to accelerate the read operations.   Block Prefetch reads
// one address per cache line, for a series of cache lines, in a short loop.
// This is faster than using software prefetch.  The technique is great for
// getting maximum read bandwidth, especially in DDR memory systems.

//#include <stddef.h>

// Inline assembly syntax for use with Visual C++
#ifdef _WIN32
#include <windows.h>
#endif

#if defined(_MSC_VER) && !defined(__x86_64__) && !defined(_M_X64)

void * memcpy_amd(void *dest, const void *src, size_t n)
{
    __asm {
	mov		ecx, [n]		; number of bytes to copy
	mov		edi, [dest]		; destination
	mov		esi, [src]		; source
	mov		ebx, ecx		; keep a copy of count

	cld
	cmp		ecx, TINY_BLOCK_COPY
	jb		$memcpy_ic_3	; tiny? skip mmx copy

	cmp		ecx, 32*1024		; do not align between 32k-64k because
	jbe		$memcpy_do_align	;  it appears to be slower
	cmp		ecx, 64*1024
	jbe		$memcpy_align_done
$memcpy_do_align:
	mov		ecx, 8			; a trick that is faster than rep movsb...
	sub		ecx, edi		; align destination to qword
	and		ecx, 111b		; get the low bits
	sub		ebx, ecx		; update copy count
	neg		ecx				; set up to jump into the array
	add		ecx, offset $memcpy_align_done
	jmp		ecx				; jump to array of movsb''s

align 4
	movsb
	movsb
	movsb
	movsb
	movsb
	movsb
	movsb
	movsb

$memcpy_align_done:			; destination is dword aligned
	mov		ecx, ebx		; number of bytes left to copy
	shr		ecx, 6			; get 64-byte block count
	jz		$memcpy_ic_2	; finish the last few bytes

	cmp		ecx, IN_CACHE_COPY/64	; too big 4 cache? use uncached copy
	jae		$memcpy_uc_test

// This is small block copy that uses the MMX registers to copy 8 bytes
// at a time.  It uses the "unrolled loop" optimization, and also uses
// the software prefetch instruction to get the data into the cache.
align 16
$memcpy_ic_1:			; 64-byte block copies, in-cache copy

	prefetchnta [esi + (200*64/34+192)]		; start reading ahead

	movq	mm0, [esi+0]	; read 64 bits
	movq	mm1, [esi+8]
	movq	[edi+0], mm0	; write 64 bits
	movq	[edi+8], mm1	;    note:  the normal movq writes the
	movq	mm2, [esi+16]	;    data to cache; a cache line will be
	movq	mm3, [esi+24]	;    allocated as needed, to store the data
	movq	[edi+16], mm2
	movq	[edi+24], mm3
	movq	mm0, [esi+32]
	movq	mm1, [esi+40]
	movq	[edi+32], mm0
	movq	[edi+40], mm1
	movq	mm2, [esi+48]
	movq	mm3, [esi+56]
	movq	[edi+48], mm2
	movq	[edi+56], mm3

	add		esi, 64			; update source pointer
	add		edi, 64			; update destination pointer
	dec		ecx				; count down
	jnz		$memcpy_ic_1	; last 64-byte block?

$memcpy_ic_2:
	mov		ecx, ebx		; has valid low 6 bits of the byte count
$memcpy_ic_3:
	shr		ecx, 2			; dword count
	and		ecx, 1111b		; only look at the "remainder" bits
	neg		ecx				; set up to jump into the array
	add		ecx, offset $memcpy_last_few
	jmp		ecx				; jump to array of movsd''s

$memcpy_uc_test:
	cmp		ecx, UNCACHED_COPY/64	; big enough? use block prefetch copy
	jae		$memcpy_bp_1

$memcpy_64_test:
	or		ecx, ecx		; tail end of block prefetch will jump here
	jz		$memcpy_ic_2	; no more 64-byte blocks left

// For larger blocks, which will spill beyond the cache, it's faster to
// use the Streaming Store instruction MOVNTQ.   This write instruction
// bypasses the cache and writes straight to main memory.  This code also
// uses the software prefetch instruction to pre-read the data.
align 16
$memcpy_uc_1:				; 64-byte blocks, uncached copy

	prefetchnta [esi + (200*64/34+192)]		; start reading ahead

	movq	mm0,[esi+0]		; read 64 bits
	add		edi,64			; update destination pointer
	movq	mm1,[esi+8]
	add		esi,64			; update source pointer
	movq	mm2,[esi-48]
	movntq	[edi-64], mm0	; write 64 bits, bypassing the cache
	movq	mm0,[esi-40]	;    note: movntq also prevents the CPU
	movntq	[edi-56], mm1	;    from READING the destination address
	movq	mm1,[esi-32]	;    into the cache, only to be over-written
	movntq	[edi-48], mm2	;    so that also helps performance
	movq	mm2,[esi-24]
	movntq	[edi-40], mm0
	movq	mm0,[esi-16]
	movntq	[edi-32], mm1
	movq	mm1,[esi-8]
	movntq	[edi-24], mm2
	movntq	[edi-16], mm0
	dec		ecx
	movntq	[edi-8], mm1
	jnz		$memcpy_uc_1	; last 64-byte block?

	jmp		$memcpy_ic_2		; almost done

// For the largest size blocks, a special technique called Block Prefetch
// can be used to accelerate the read operations.   Block Prefetch reads
// one address per cache line, for a series of cache lines, in a short loop.
// This is faster than using software prefetch.  The technique is great for
// getting maximum read bandwidth, especially in DDR memory systems.
$memcpy_bp_1:			; large blocks, block prefetch copy

	cmp		ecx, CACHEBLOCK			; big enough to run another prefetch loop?
	jl		$memcpy_64_test			; no, back to regular uncached copy

	mov		eax, CACHEBLOCK / 2		; block prefetch loop, unrolled 2X
	add		esi, CACHEBLOCK * 64	; move to the top of the block
align 16
$memcpy_bp_2:
	mov		edx, [esi-64]		; grab one address per cache line
	mov		edx, [esi-128]		; grab one address per cache line
	sub		esi, 128			; go reverse order to suppress HW prefetcher
	dec		eax					; count down the cache lines
	jnz		$memcpy_bp_2		; keep grabbing more lines into cache

	mov		eax, CACHEBLOCK		; now that it is in cache, do the copy
align 16
$memcpy_bp_3:
	movq	mm0, [esi   ]		; read 64 bits
	movq	mm1, [esi+ 8]
	movq	mm2, [esi+16]
	movq	mm3, [esi+24]
	movq	mm4, [esi+32]
	movq	mm5, [esi+40]
	movq	mm6, [esi+48]
	movq	mm7, [esi+56]
	add		esi, 64				; update source pointer
	movntq	[edi   ], mm0		; write 64 bits, bypassing cache
	movntq	[edi+ 8], mm1		;    note: movntq also prevents the CPU
	movntq	[edi+16], mm2		;    from READING the destination address 
	movntq	[edi+24], mm3		;    into the cache, only to be over-written,
	movntq	[edi+32], mm4		;    so that also helps performance
	movntq	[edi+40], mm5
	movntq	[edi+48], mm6
	movntq	[edi+56], mm7
	add		edi, 64				; update dest pointer

	dec		eax					; count down

	jnz		$memcpy_bp_3		; keep copying
	sub		ecx, CACHEBLOCK		; update the 64-byte block count
	jmp		$memcpy_bp_1		; keep processing chunks

// The smallest copy uses the X86 "movsd" instruction, in an optimized
// form which is an "unrolled loop".   Then it handles the last few bytes.
align 4
	movsd
	movsd			; perform last 1-15 dword copies
	movsd
	movsd
	movsd
	movsd
	movsd
	movsd
	movsd
	movsd			; perform last 1-7 dword copies
	movsd
	movsd
	movsd
	movsd
	movsd
	movsd

$memcpy_last_few:		; dword aligned from before movsd''s
	mov		ecx, ebx	; has valid low 2 bits of the byte count
	and		ecx, 11b	; the last few cows must come home
	jz		$memcpy_final	; no more, lets leave
	rep		movsb		; the last 1, 2, or 3 bytes

$memcpy_final: 
	emms				; clean up the MMX state
	sfence				; flush the write buffer
	mov		eax, [dest]	; ret value = destination pointer

    }
}

// mmx memcmp implementation, size has to be a multiple of 8
// returns 0 is equal, nonzero value if not equal
// ~10 times faster than standard memcmp
// (zerofrog)
unsigned char memcmp_mmx(const void* src1, const void* src2, int cmpsize)
{
	assert( (cmpsize&7) == 0 );

	__asm {
		push esi
		mov ecx, cmpsize
		mov edx, src1
		mov esi, src2
		
		cmp ecx, 32
		jl Done4

		// custom test first 8 to make sure things are ok
		movq mm0, [esi]
		movq mm1, [esi+8]
		pcmpeqd mm0, [edx]
		pcmpeqd mm1, [edx+8]
		pand mm0, mm1
		movq mm2, [esi+16]
		pmovmskb eax, mm0
		movq mm3, [esi+24]

		// check if eq
		cmp eax, 0xff
		je NextComp
		mov eax, 1
		jmp End

NextComp:
		pcmpeqd mm2, [edx+16]
		pcmpeqd mm3, [edx+24]
		pand mm2, mm3
		pmovmskb eax, mm2

		sub ecx, 32
		add esi, 32
		add edx, 32

		// check if eq
		cmp eax, 0xff
		je ContinueTest
		mov eax, 1
		jmp End

		cmp ecx, 64
		jl Done8

Cmp8:
		movq mm0, [esi]
		movq mm1, [esi+8]
		movq mm2, [esi+16]
		movq mm3, [esi+24]
		movq mm4, [esi+32]
		movq mm5, [esi+40]
		movq mm6, [esi+48]
		movq mm7, [esi+56]
		pcmpeqd mm0, [edx]
		pcmpeqd mm1, [edx+8]
		pcmpeqd mm2, [edx+16]
		pcmpeqd mm3, [edx+24]
		pand mm0, mm1
		pcmpeqd mm4, [edx+32]
		pand mm0, mm2
		pcmpeqd mm5, [edx+40]
		pand mm0, mm3
		pcmpeqd mm6, [edx+48]
		pand mm0, mm4
		pcmpeqd mm7, [edx+56]
		pand mm0, mm5
		pand mm0, mm6
		pand mm0, mm7
		pmovmskb eax, mm0
		
		// check if eq
		cmp eax, 0xff
		je Continue
		mov eax, 1
		jmp End

Continue:
		sub ecx, 64
		add esi, 64
		add edx, 64
ContinueTest:
		cmp ecx, 64
		jge Cmp8

Done8:
		test ecx, 0x20
		jz Done4
		movq mm0, [esi]
		movq mm1, [esi+8]
		movq mm2, [esi+16]
		movq mm3, [esi+24]
		pcmpeqd mm0, [edx]
		pcmpeqd mm1, [edx+8]
		pcmpeqd mm2, [edx+16]
		pcmpeqd mm3, [edx+24]
		pand mm0, mm1
		pand mm0, mm2
		pand mm0, mm3
		pmovmskb eax, mm0
		sub ecx, 32
		add esi, 32
		add edx, 32

		// check if eq
		cmp eax, 0xff
		je Done4
		mov eax, 1
		jmp End

Done4:
		cmp ecx, 24
		jne Done2
		movq mm0, [esi]
		movq mm1, [esi+8]
		movq mm2, [esi+16]
		pcmpeqd mm0, [edx]
		pcmpeqd mm1, [edx+8]
		pcmpeqd mm2, [edx+16]
		pand mm0, mm1
		pand mm0, mm2
		pmovmskb eax, mm0

		// check if eq
		cmp eax, 0xff
		setne al
		jmp End

Done2:
		cmp ecx, 16
		jne Done1

		movq mm0, [esi]
		movq mm1, [esi+8]
		pcmpeqd mm0, [edx]
		pcmpeqd mm1, [edx+8]
		pand mm0, mm1
		pmovmskb eax, mm0

		// check if eq
		cmp eax, 0xff
		setne al
		jmp End

Done1:
		cmp ecx, 8
		jne Done

		mov eax, [esi]
		mov esi, [esi+4]
		cmp eax, [edx]
		je Next
		mov eax, 1
		jmp End

Next:
		cmp esi, [edx+4]
		setne al
		jmp End

Done:
		xor eax, eax

End:
		pop esi
		emms
	}
}

#else // _MSC_VER
// assume gcc or mingw or win x64

#include <memory.h>
#include <string.h>

void * memcpy_amd(void *dest, const void *src, size_t n)
{
memcpy(dest, src, n);
return dest;
}


#endif