diff --git a/components/esp_phy/CMakeLists.txt b/components/esp_phy/CMakeLists.txt
index f6cea7452d..b3efc9c51f 100644
--- a/components/esp_phy/CMakeLists.txt
+++ b/components/esp_phy/CMakeLists.txt
@@ -57,22 +57,30 @@ if(link_binary_libs)
 
     idf_component_get_property(esp_phy_lib esp_phy COMPONENT_LIB)
 
+    if(CONFIG_ESP_PHY_ENABLE_CERT_TEST)
+        if(CONFIG_IDF_TARGET_ESP32)
+            target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libbttestmode.a
+            librftest.a $<TARGET_FILE:${esp_phy_lib}>)
+        elseif(CONFIG_IDF_TARGET_ESP32S2)
+            target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> librftest.a
+            librfate.a $<TARGET_FILE:${esp_phy_lib}>)
+        else()
+            target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libbttestmode.a
+            librfate.a librftest.a $<TARGET_FILE:${esp_phy_lib}>)
+        endif()
+    endif()
+
     if(CONFIG_IDF_TARGET_ESP32)
         target_link_libraries(${COMPONENT_LIB} PUBLIC rtc)
         target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a librtc.a
         $<TARGET_FILE:${esp_phy_lib}>)
-    elseif(CONFIG_IDF_TARGET_ESP32S2)
-        target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a
-        $<TARGET_FILE:${esp_phy_lib}>)
     elseif(CONFIG_SOC_BT_SUPPORTED OR CONFIG_SOC_IEEE802154_SUPPORTED)
         target_link_libraries(${COMPONENT_LIB} PUBLIC btbb)
         target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a libbtbb.a
         $<TARGET_FILE:${esp_phy_lib}>)
-    endif()
-
-    if(CONFIG_ESP_PHY_ENABLE_CERT_TEST)
-        target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libbttestmode.a
-        librfate.a librftest.a $<TARGET_FILE:${esp_phy_lib}>)
+    elseif(CONFIG_SOC_WIFI_SUPPORTED)
+        target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a
+        $<TARGET_FILE:${esp_phy_lib}>)
     endif()
 endif()
 
diff --git a/components/esp_phy/Kconfig b/components/esp_phy/Kconfig
index b6b4e4923e..77c4d53b0d 100644
--- a/components/esp_phy/Kconfig
+++ b/components/esp_phy/Kconfig
@@ -124,7 +124,6 @@ menu "PHY"
     config ESP_PHY_ENABLE_CERT_TEST
         bool "Enable RF certification test functions"
         default n
-        depends on IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3
         help
             If enabled, you can use RF certification test APIs.
 
diff --git a/components/esp_phy/include/esp_phy_cert_test.h b/components/esp_phy/include/esp_phy_cert_test.h
index 461295683c..75e6b5e093 100644
--- a/components/esp_phy/include/esp_phy_cert_test.h
+++ b/components/esp_phy/include/esp_phy_cert_test.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -63,7 +63,7 @@ typedef struct {
     uint32_t phy_rx_correct_count; /*!< The number of desired packets received */
     int phy_rx_rssi;               /*!< Average RSSI of desired packets */
     uint32_t phy_rx_total_count;   /*!< The number of total packets received */
-    uint32_t phy_rx_result_flag;   /*!< 0 means no RX info; 1 means the lastest Wi-Fi RX info; 2 means the lastest BLE RX info. */
+    uint32_t phy_rx_result_flag;   /*!< 0 means no RX info; 1 means the latest Wi-Fi RX info; 2 means the latest BLE RX info. */
 } esp_phy_rx_result_t;
 
 /**
@@ -120,7 +120,7 @@ void esp_phy_cbw40m_en(bool en);
 void esp_phy_wifi_tx(uint32_t chan, esp_phy_wifi_rate_t rate, int8_t backoff, uint32_t length_byte, uint32_t packet_delay, uint32_t packet_num);
 
 /**
- * @brief Test start/stop command, used to stop transmitting or reciving state.
+ * @brief Test start/stop command, used to stop transmitting or receiving state.
  *
  * @param value:
  *     Value should be set to 3 before TX/RX.
diff --git a/components/esp_phy/lib b/components/esp_phy/lib
index 06e7625de1..8608fcf54d 160000
--- a/components/esp_phy/lib
+++ b/components/esp_phy/lib
@@ -1 +1 @@
-Subproject commit 06e7625de197bc12797dd701d6762229bca01826
+Subproject commit 8608fcf54d51e81f2e74ebf335fa33f61953f7c8
diff --git a/examples/phy/.build-test-rules.yml b/examples/phy/.build-test-rules.yml
index 78b3f1475e..921265fed0 100644
--- a/examples/phy/.build-test-rules.yml
+++ b/examples/phy/.build-test-rules.yml
@@ -1,7 +1,3 @@
 # Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
 
 examples/phy/cert_test:
-  enable:
-    - if: IDF_TARGET in ["esp32c3", "esp32s3"]
-      temporary: true
-      reason: the other targets are not tested yet
diff --git a/examples/phy/cert_test/README.md b/examples/phy/cert_test/README.md
index ee41af138c..197c573919 100644
--- a/examples/phy/cert_test/README.md
+++ b/examples/phy/cert_test/README.md
@@ -1,5 +1,5 @@
-| Supported Targets | ESP32-C3 | ESP32-S3 |
-| ----------------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
 
 # Certification Test Example
 
@@ -13,7 +13,7 @@ Before project configuration and build, be sure to set the correct chip target u
 
 ### Hardware Required
 
-* A development board with ESP32-C3/ESP32-S3/ SoC.
+* A development board with ESP32/ESP32-C2/ESP32-C3/ESP32-C6/ESP32-H2/ESP32-S2/ESP32-S3/ SoC.
 * A USB cable for Power supply and programming
 
 ### Configure the project
@@ -34,11 +34,6 @@ Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
 
 (To exit the serial monitor, type ``Ctrl-]``.)
 
-See the Getting Started Guide for all the steps to configure and use the ESP-IDF to build projects.
-
-* [ESP-IDF Getting Started Guide on ESP32-C3](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/get-started/index.html)
-* [ESP-IDF Getting Started Guide on ESP32-S3](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/get-started/index.html)
-
 ## Example Output
 
 The command and output logs for each test are as follows:
@@ -118,4 +113,3 @@ phy>
 ## Troubleshooting
 
 For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
-
diff --git a/examples/phy/cert_test/main/cert_test.c b/examples/phy/cert_test/main/cert_test.c
index 4e8e3c0405..cd8ac2afac 100644
--- a/examples/phy/cert_test/main/cert_test.c
+++ b/examples/phy/cert_test/main/cert_test.c
@@ -1,9 +1,10 @@
 /*
- * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
+#include "sdkconfig.h"
 #include "nvs_flash.h"
 
 #include "esp_console.h"
@@ -38,18 +39,25 @@ void app_main(void)
     register_phy_cmd();
 
     /* rftest.a requirements */
+#if CONFIG_SOC_WIFI_SUPPORTED
     esp_wifi_power_domain_on();
+#endif
 
     esp_phy_rftest_config(1);
     esp_phy_rftest_init();
 #endif
 
+    int help_index = 1;
     printf("\n ==================================================\n");
     printf(" |            RF certification test               |\n");
     printf(" |                                                |\n");
     printf(" |  1. Print 'help' to gain overview of commands  |\n");
-    printf(" |  2. Wi-Fi certification test                   |\n");
-    printf(" |  3. Bluetooth certification test               |\n");
+#if CONFIG_SOC_WIFI_SUPPORTED
+    printf(" |  %d. Wi-Fi certification test                   |\n", ++help_index);
+#endif
+#if CONFIG_SOC_BT_SUPPORTED
+    printf(" |  %d. Bluetooth certification test               |\n", ++help_index);
+#endif
     printf(" |                                                |\n");
     printf(" =================================================\n\n");
 
diff --git a/examples/phy/cert_test/main/cmd_phy.c b/examples/phy/cert_test/main/cmd_phy.c
index 35365861d0..952629a2a6 100644
--- a/examples/phy/cert_test/main/cmd_phy.c
+++ b/examples/phy/cert_test/main/cmd_phy.c
@@ -3,6 +3,8 @@
  *
  * SPDX-License-Identifier: Unlicense OR CC0-1.0
  */
+
+#include "sdkconfig.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "esp_log.h"
diff --git a/examples/phy/cert_test/sdkconfig.defaults b/examples/phy/cert_test/sdkconfig.defaults
index b0ce7b5c29..13e6bed13d 100644
--- a/examples/phy/cert_test/sdkconfig.defaults
+++ b/examples/phy/cert_test/sdkconfig.defaults
@@ -2,3 +2,4 @@ CONFIG_ESP_TASK_WDT_EN=n
 
 CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION=y
 CONFIG_ESP_PHY_ENABLE_CERT_TEST=y
+CONFIG_BT_ENABLED=y
diff --git a/examples/phy/cert_test/sdkconfig.defaults.esp32s3 b/examples/phy/cert_test/sdkconfig.defaults.esp32s3
new file mode 100644
index 0000000000..771824b41e
--- /dev/null
+++ b/examples/phy/cert_test/sdkconfig.defaults.esp32s3
@@ -0,0 +1,4 @@
+#
+# ESP32S3-specific
+#
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=4096