docs/en: update heap debugging guide for tracing on RISC-V architecture

docs/en/api-reference/system/heap_debug.rst

@@ -213,7 +213,11 @@ An example::
       ...
   }
 
-The output from the heap trace will look something like this::
+The output from the heap trace will look something like this:
+
+.. only:: CONFIG_IDF_TARGET_ARCH_XTENSA
+
+    ::
 
         2 allocations trace (100 entry buffer)
         32 bytes (@ 0x3ffaf214) allocated CPU 0 ccount 0x2e9b7384 caller 0x400d276d:0x400d27c1
@@ -229,20 +233,33 @@ The output from the heap trace will look something like this::
         40 bytes 'leaked' in trace (2 allocations)
         total allocations 2 total frees 0
 
+.. only:: CONFIG_IDF_TARGET_ARCH_RISCV
+
+    ::
+
+        2 allocations trace (100 entry buffer)
+        32 bytes (@ 0x3ffaf214) allocated CPU 0 ccount 0x2e9b7384 caller
+        8 bytes (@ 0x3ffaf804) allocated CPU 0 ccount 0x2e9b79c0 caller
+        40 bytes 'leaked' in trace (2 allocations)
+        total allocations 2 total frees 0
+
 (Above example output is using :doc:`IDF Monitor </api-guides/tools/idf-monitor>` to automatically decode PC addresses to their source files & line number.)
 
 The first line indicates how many allocation entries are in the buffer, compared to its total size.
 
 In ``HEAP_TRACE_LEAKS`` mode, for each traced memory allocation which has not already been freed a line is printed with:
 
-- ``XX bytes`` is number of bytes allocated
+.. list::
-- ``@ 0x...`` is the heap address returned from malloc/calloc.
-- ``CPU x`` is the CPU (0 or 1) running when the allocation was made.
-- ``ccount 0x...`` is the CCOUNT (CPU cycle count) register value when the allocation was mode. Is different for CPU 0 vs CPU 1.
-- ``caller 0x...`` gives the call stack of the call to malloc()/free(), as a list of PC addresses.
-  These can be decoded to source files and line numbers, as shown above.
 
-The depth of the call stack recorded for each trace entry can be configured in the project configuration menu, under ``Heap Memory Debugging`` -> ``Enable heap tracing`` -> ``Heap tracing stack depth``. Up to 10 stack frames can be recorded for each allocation (the default is 2). Each additional stack frame increases the memory usage of each ``heap_trace_record_t`` record by eight bytes.
+    - ``XX bytes`` is number of bytes allocated
+    - ``@ 0x...`` is the heap address returned from malloc/calloc.
+    - ``CPU x`` is the CPU (0 or 1) running when the allocation was made.
+    - ``ccount 0x...`` is the CCOUNT (CPU cycle count) register value when the allocation was mode. Is different for CPU 0 vs CPU 1.
+    :CONFIG_IDF_TARGET_ARCH_XTENSA: - ``caller 0x...`` gives the call stack of the call to malloc()/free(), as a list of PC addresses. These can be decoded to source files and line numbers, as shown above.
+
+.. only:: not CONFIG_IDF_TARGET_ARCH_RISCV
+
+    The depth of the call stack recorded for each trace entry can be configured in the project configuration menu, under ``Heap Memory Debugging`` -> ``Enable heap tracing`` -> ``Heap tracing stack depth``. Up to 10 stack frames can be recorded for each allocation (the default is 2). Each additional stack frame increases the memory usage of each ``heap_trace_record_t`` record by eight bytes.
 
 Finally, the total number of 'leaked' bytes (bytes allocated but not freed while trace was running) is printed, and the total number of allocations this represents.