diff --git a/components/esp_hw_support/CMakeLists.txt b/components/esp_hw_support/CMakeLists.txt
index 80b5c5ec0d..f07906a1ae 100644
--- a/components/esp_hw_support/CMakeLists.txt
+++ b/components/esp_hw_support/CMakeLists.txt
@@ -122,12 +122,6 @@ if(NOT BOOTLOADER_BUILD)
     if(CONFIG_SOC_RTC_FAST_MEM_SUPPORTED)
         list(APPEND srcs "sleep_wake_stub.c")
     endif()
-
-    if(CONFIG_IDF_TARGET_ESP32H2)
-        list(REMOVE_ITEM srcs
-                "sleep_wake_stub.c"   # TODO: IDF-6268
-            )
-    endif()
 else()
     # Requires "_esp_error_check_failed()" function
     list(APPEND priv_requires "esp_system")
diff --git a/components/esp_hw_support/include/esp_sleep.h b/components/esp_hw_support/include/esp_sleep.h
index a836a399c2..f0f3f26ab9 100644
--- a/components/esp_hw_support/include/esp_sleep.h
+++ b/components/esp_hw_support/include/esp_sleep.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -26,10 +26,21 @@ typedef void (*esp_deep_sleep_cb_t)(void);
 /**
  * @brief Logic function used for EXT1 wakeup mode.
  */
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
+#if CONFIG_IDF_TARGET_ESP32
 typedef enum {
     ESP_EXT1_WAKEUP_ALL_LOW = 0,    //!< Wake the chip when all selected GPIOs go low
     ESP_EXT1_WAKEUP_ANY_HIGH = 1    //!< Wake the chip when any of the selected GPIOs go high
 } esp_sleep_ext1_wakeup_mode_t;
+#else
+typedef enum {
+    ESP_EXT1_WAKEUP_ANY_LOW = 0,    //!< Wake the chip when any of the selected GPIOs go low
+    ESP_EXT1_WAKEUP_ANY_HIGH = 1,    //!< Wake the chip when any of the selected GPIOs go high
+    ESP_EXT1_WAKEUP_ALL_LOW __attribute__((deprecated("wakeup mode \"ALL_LOW\" is no longer supported after ESP32, \
+    please use ESP_EXT1_WAKEUP_ANY_LOW instead"))) = ESP_EXT1_WAKEUP_ANY_LOW
+} esp_sleep_ext1_wakeup_mode_t;
+#endif
+#endif
 
 #if SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP
 typedef enum {
diff --git a/components/esp_hw_support/port/esp32h2/pmu_sleep.c b/components/esp_hw_support/port/esp32h2/pmu_sleep.c
index 30ef282da7..ffe456fa60 100644
--- a/components/esp_hw_support/port/esp32h2/pmu_sleep.c
+++ b/components/esp_hw_support/port/esp32h2/pmu_sleep.c
@@ -14,6 +14,7 @@
 #include "soc/soc.h"
 #include "soc/rtc.h"
 #include "soc/pmu_struct.h"
+#include "hal/lp_aon_hal.h"
 #include "esp_private/esp_pmu.h"
 
 #define HP(state)   (PMU_MODE_HP_ ## state)
@@ -218,6 +219,8 @@ uint32_t pmu_sleep_start(uint32_t wakeup_opt, uint32_t reject_opt, uint32_t lslp
 {
     assert(PMU_instance()->hal);
 
+    lp_aon_hal_inform_wakeup_type(dslp);
+
     pmu_ll_hp_set_wakeup_enable(PMU_instance()->hal->dev, wakeup_opt);
     pmu_ll_hp_set_reject_enable(PMU_instance()->hal->dev, reject_opt);
 
diff --git a/components/esp_hw_support/port/esp32h2/private_include/pmu_param.h b/components/esp_hw_support/port/esp32h2/private_include/pmu_param.h
index 22ca4216e4..f52cdcf5ff 100644
--- a/components/esp_hw_support/port/esp32h2/private_include/pmu_param.h
+++ b/components/esp_hw_support/port/esp32h2/private_include/pmu_param.h
@@ -337,34 +337,33 @@ typedef struct {
             .pd_cur          = 1,                           \
             .bias_sleep      = 1,                           \
             .xpd             = 0,                           \
-            .dbias           = 0x15,                        \
-            .slp_mem_xpd     = 1,                           \
-            .slp_mem_dbias   = 0xc,                         \
-            .slp_logic_xpd   = 1,                           \
-            .slp_logic_dbias = 0x5,                         \
-            .drv_b           = 0x18c                        \
+            .dbias           = 0,                           \
+            .slp_mem_xpd     = 0,                           \
+            .slp_mem_dbias   = 0,                           \
+            .slp_logic_xpd   = 0,                           \
+            .slp_logic_dbias = 0,                           \
+            .drv_b           = 0xFFFFFF                     \
         }                                                   \
     },                                                      \
     .lp_sys[PMU_MODE_LP_ACTIVE] = {                         \
         .analog = {                                         \
             .xpd           = 1,                             \
-            .dbias         = 0x1a,                          \
+            .dbias         = 0xe,                           \
             .slp_xpd       = 0,                             \
             .slp_dbias     = 0,                             \
-            .drv_b         = 0x7                            \
+            .drv_b         = 0                              \
         }                                                   \
     },                                                      \
     .lp_sys[PMU_MODE_LP_SLEEP] = {                          \
         .analog = {                                         \
             .xpd_bias      = 0,                             \
-            .dbg_atten     = 0xe,                           \
             .pd_cur        = 1,                             \
             .bias_sleep    = 1,                             \
             .xpd           = 0,                             \
             .dbias         = 0,                             \
             .slp_xpd       = 1,                             \
-            .slp_dbias     = 0xe,                           \
-            .drv_b         = 0                              \
+            .slp_dbias     = 5,                             \
+            .drv_b         = 7                              \
         }                                                   \
     }                                                       \
 }
diff --git a/components/esp_hw_support/sleep_gpio.c b/components/esp_hw_support/sleep_gpio.c
index 8a420fce9b..759659d1a9 100644
--- a/components/esp_hw_support/sleep_gpio.c
+++ b/components/esp_hw_support/sleep_gpio.c
@@ -20,14 +20,13 @@
 #include "driver/gpio.h"
 #include "hal/gpio_hal.h"
 #include "hal/rtc_io_hal.h"
+#include "soc/rtc_io_periph.h"
 
 #if SOC_LP_AON_SUPPORTED
 #include "hal/lp_aon_hal.h"
 #else
-#if !CONFIG_IDF_TARGET_ESP32H2
 #include "hal/rtc_hal.h"
 #endif
-#endif
 
 #include "esp_private/gpio.h"
 #include "esp_private/sleep_gpio.h"
diff --git a/components/esp_hw_support/sleep_modes.c b/components/esp_hw_support/sleep_modes.c
index a513570e2a..3835c113aa 100644
--- a/components/esp_hw_support/sleep_modes.c
+++ b/components/esp_hw_support/sleep_modes.c
@@ -32,11 +32,9 @@
 #if SOC_LP_AON_SUPPORTED
 #include "hal/lp_aon_hal.h"
 #else
-#if !CONFIG_IDF_TARGET_ESP32H2
 #include "hal/rtc_cntl_ll.h"
 #include "hal/rtc_hal.h"
 #endif
-#endif
 
 #include "driver/uart.h"
 
@@ -90,6 +88,7 @@
 #include "esp32h2/rom/cache.h"
 #include "esp32h2/rom/rtc.h"
 #include "soc/extmem_reg.h"
+#include "hal/gpio_ll.h"
 #endif
 
 #if SOC_LP_TIMER_SUPPORTED
@@ -260,7 +259,6 @@ static void touch_wakeup_prepare(void);
 static void gpio_deep_sleep_wakeup_prepare(void);
 #endif
 
-#if !CONFIG_IDF_TARGET_ESP32H2
 #if SOC_RTC_FAST_MEM_SUPPORTED
 #if SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY
 static RTC_FAST_ATTR esp_deep_sleep_wake_stub_fn_t wake_stub_fn_handler = NULL;
@@ -366,7 +364,6 @@ void RTC_IRAM_ATTR esp_default_wake_deep_sleep(void)
 
 void __attribute__((weak, alias("esp_default_wake_deep_sleep"))) esp_wake_deep_sleep(void);
 #endif // SOC_RTC_FAST_MEM_SUPPORTED
-#endif // !CONFIG_IDF_TARGET_ESP32H2
 
 void esp_deep_sleep(uint64_t time_in_us)
 {
@@ -641,7 +638,6 @@ static esp_err_t IRAM_ATTR esp_sleep_start(uint32_t pd_flags, esp_sleep_mode_t m
 #endif
     }
 #endif
-
     misc_modules_sleep_prepare(deep_sleep);
 
 #if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
@@ -681,7 +677,6 @@ static esp_err_t IRAM_ATTR esp_sleep_start(uint32_t pd_flags, esp_sleep_mode_t m
     if (periph_using_8m) {
         sleep_flags |= RTC_SLEEP_DIG_USE_8M;
     }
-
     // Enter sleep
     esp_err_t result;
 #if SOC_PMU_SUPPORTED
@@ -721,7 +716,6 @@ static esp_err_t IRAM_ATTR esp_sleep_start(uint32_t pd_flags, esp_sleep_mode_t m
             esp_sleep_isolate_digital_gpio();
 #endif
 
-#if !CONFIG_IDF_TARGET_ESP32H2 // TODO: IDF-6268
 #if SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY
             esp_set_deep_sleep_wake_stub_default_entry();
             // Enter Deep Sleep
@@ -742,9 +736,6 @@ static esp_err_t IRAM_ATTR esp_sleep_start(uint32_t pd_flags, esp_sleep_mode_t m
             result = rtc_deep_sleep_start(s_config.wakeup_triggers, reject_triggers);
 #endif
 #endif // SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY
-#else  // !CONFIG_IDF_TARGET_ESP32H2
-            result = ESP_OK;
-#endif // !CONFIG_IDF_TARGET_ESP32H2
         } else {
             /* On esp32c6, only the lp_aon pad hold function can only hold the GPIO state in the active mode.
                In order to avoid the leakage of the SPI cs pin, hold it here */
@@ -1425,20 +1416,23 @@ static void ext1_wakeup_prepare(void)
         rtcio_hal_function_select(rtc_pin, RTCIO_FUNC_RTC);
         // set input enable in sleep mode
         rtcio_hal_input_enable(rtc_pin);
-#endif
-
 #if SOC_PM_SUPPORT_RTC_PERIPH_PD
         // Pad configuration depends on RTC_PERIPH state in sleep mode
         if (s_config.domain[ESP_PD_DOMAIN_RTC_PERIPH].pd_option != ESP_PD_OPTION_ON) {
-#if SOC_RTCIO_INPUT_OUTPUT_SUPPORTED
-            // RTC_PERIPH will be powered down, so RTC_IO_ registers will
-            // loose their state. Lock pad configuration.
-            // Pullups/pulldowns also need to be disabled.
-            rtcio_hal_pullup_disable(rtc_pin);
-            rtcio_hal_pulldown_disable(rtc_pin);
-#endif
             rtcio_hal_hold_enable(rtc_pin);
         }
+#endif
+#else
+        /* ESP32H2 use hp iomux to config rtcio, and there is no complete
+        * rtcio functionality. In the case of EXT1 wakeup, rtcio only provides
+        * a pathway to EXT1. */
+
+        // Route pad to DIGITAL
+        rtcio_hal_function_select(rtc_pin, RTCIO_FUNC_DIGITAL);
+        // set input enable
+        gpio_ll_input_enable(&GPIO, gpio);
+        // hold rtc_pin to use it during sleep state
+        rtcio_hal_hold_enable(rtc_pin);
 #endif
         // Keep track of pins which are processed to bail out early
         rtc_gpio_mask &= ~BIT(rtc_pin);
@@ -1446,7 +1440,7 @@ static void ext1_wakeup_prepare(void)
 
     // Clear state from previous wakeup
     rtc_hal_ext1_clear_wakeup_status();
-    // Set RTC IO pins and mode (any high, all low) to be used for wakeup
+    // Set RTC IO pins and mode to be used for wakeup
     rtc_hal_ext1_set_wakeup_pins(s_config.ext1_rtc_gpio_mask, s_config.ext1_trigger_mode);
 }
 
@@ -1476,20 +1470,14 @@ uint64_t esp_sleep_get_ext1_wakeup_status(void)
 #if SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP
 uint64_t esp_sleep_get_gpio_wakeup_status(void)
 {
-#if CONFIG_IDF_TARGET_ESP32H2 // TODO: IDF-6268
-    return 0;
-#else
     if (esp_sleep_get_wakeup_cause() != ESP_SLEEP_WAKEUP_GPIO) {
         return 0;
     }
-
     return rtc_hal_gpio_get_wakeup_status();
-#endif // !CONFIG_IDF_TARGET_ESP32H2
 }
 
 static void gpio_deep_sleep_wakeup_prepare(void)
 {
-#if !CONFIG_IDF_TARGET_ESP32H2 // TODO: IDF-6268
     for (gpio_num_t gpio_idx = GPIO_NUM_0; gpio_idx < GPIO_NUM_MAX; gpio_idx++) {
         if (((1ULL << gpio_idx) & s_config.gpio_wakeup_mask) == 0) {
             continue;
@@ -1505,7 +1493,6 @@ static void gpio_deep_sleep_wakeup_prepare(void)
     }
     // Clear state from previous wakeup
     rtc_hal_gpio_clear_wakeup_status();
-#endif // !CONFIG_IDF_TARGET_ESP32H2
 }
 
 esp_err_t esp_deep_sleep_enable_gpio_wakeup(uint64_t gpio_pin_mask, esp_deepsleep_gpio_wake_up_mode_t mode)
diff --git a/components/esp_rom/include/esp32h2/rom/rtc.h b/components/esp_rom/include/esp32h2/rom/rtc.h
index 7f516d704b..69e625dc50 100644
--- a/components/esp_rom/include/esp32h2/rom/rtc.h
+++ b/components/esp_rom/include/esp32h2/rom/rtc.h
@@ -51,6 +51,7 @@ extern "C" {
   *     LP_AON_STORE6_REG     FAST_RTC_MEMORY_ENTRY
   *     LP_AON_STORE7_REG     FAST_RTC_MEMORY_CRC
   *     LP_AON_STORE8_REG     Store light sleep wake stub addr
+  *     LP_AON_STORE9_REG     Store the sleep mode at bit[0]  (0:light sleep 1:deep sleep)
   *************************************************************************************
   */
 
@@ -63,6 +64,7 @@ extern "C" {
 #define RTC_RESET_CAUSE_REG     LP_AON_STORE6_REG
 #define RTC_MEMORY_CRC_REG      LP_AON_STORE7_REG
 #define LIGHT_SLEEP_WAKE_STUB_ADDR_REG  LP_AON_STORE8_REG
+#define SLEEP_MODE_REG          LP_AON_STORE9_REG
 
 #define RTC_DISABLE_ROM_LOG ((1 << 0) | (1 << 16)) //!< Disable logging from the ROM code.
 
diff --git a/components/esp_system/ld/esp32h2/sections.ld.in b/components/esp_system/ld/esp32h2/sections.ld.in
index c8e45343f3..8f84717185 100644
--- a/components/esp_system/ld/esp32h2/sections.ld.in
+++ b/components/esp_system/ld/esp32h2/sections.ld.in
@@ -17,6 +17,8 @@ SECTIONS
   {
     . = ALIGN(4);
     _rtc_fast_start = ABSOLUTE(.);
+    _rtc_text_start = ABSOLUTE(.);
+    *(.rtc.entry.text)
 
     mapping[rtc_text]
 
diff --git a/components/esp_system/test_apps/esp_system_unity_tests/main/test_sleep.c b/components/esp_system/test_apps/esp_system_unity_tests/main/test_sleep.c
index 681ae8a81d..8ae49e9948 100644
--- a/components/esp_system/test_apps/esp_system_unity_tests/main/test_sleep.c
+++ b/components/esp_system/test_apps/esp_system_unity_tests/main/test_sleep.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2019-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2019-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -419,7 +419,11 @@ TEST_CASE("wake up using ext1 when RTC_PERIPH is off (13 low)", "[deepsleep][ign
 {
     // This test needs external pullup
     ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
+#if CONFIG_IDF_TARGET_ESP32
     ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ALL_LOW));
+#else
+    ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_LOW));
+#endif
     esp_deep_sleep_start();
 }
 
@@ -439,7 +443,11 @@ TEST_CASE("wake up using ext1 when RTC_PERIPH is on (13 low)", "[deepsleep][igno
     ESP_ERROR_CHECK(gpio_pullup_en(GPIO_NUM_13));
     ESP_ERROR_CHECK(gpio_pulldown_dis(GPIO_NUM_13));
     ESP_ERROR_CHECK(esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON));
+#if CONFIG_IDF_TARGET_ESP32
     ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ALL_LOW));
+#else
+    ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_LOW));
+#endif
     esp_deep_sleep_start();
 }
 #endif // SOC_PM_SUPPORT_EXT1_WAKEUP
diff --git a/components/hal/esp32c6/include/hal/lp_aon_hal.h b/components/hal/esp32c6/include/hal/lp_aon_hal.h
index c619dc0a6d..f3cd9e6b85 100644
--- a/components/hal/esp32c6/include/hal/lp_aon_hal.h
+++ b/components/hal/esp32c6/include/hal/lp_aon_hal.h
@@ -8,17 +8,10 @@
 
 #include "hal/lp_aon_ll.h"
 
-#define rtc_hal_ext1_get_wakeup_status()                    lp_aon_hal_ext1_get_wakeup_status()
-#define rtc_hal_ext1_clear_wakeup_status()                  lp_aon_hal_ext1_clear_wakeup_status()
-#define rtc_hal_ext1_set_wakeup_pins(mask, mode)            lp_aon_hal_ext1_set_wakeup_pins(mask, mode)
-#define rtc_hal_ext1_clear_wakeup_pins()                    lp_aon_hal_ext1_clear_wakeup_pins()
-#define rtc_hal_ext1_get_wakeup_pins()                      lp_aon_hal_ext1_get_wakeup_pins()
-
-
-#define lp_aon_hal_ext1_get_wakeup_status()                 lp_aon_ll_ext1_get_wakeup_status()
-#define lp_aon_hal_ext1_clear_wakeup_status()               lp_aon_ll_ext1_clear_wakeup_status()
-#define lp_aon_hal_ext1_set_wakeup_pins(mask, mode)         lp_aon_ll_ext1_set_wakeup_pins(mask, mode)
-#define lp_aon_hal_ext1_clear_wakeup_pins()                 lp_aon_ll_ext1_clear_wakeup_pins()
-#define lp_aon_hal_ext1_get_wakeup_pins()                   lp_aon_ll_ext1_get_wakeup_pins()
+#define rtc_hal_ext1_get_wakeup_status()                    lp_aon_ll_ext1_get_wakeup_status()
+#define rtc_hal_ext1_clear_wakeup_status()                  lp_aon_ll_ext1_clear_wakeup_status()
+#define rtc_hal_ext1_set_wakeup_pins(mask, mode)            lp_aon_ll_ext1_set_wakeup_pins(mask, mode)
+#define rtc_hal_ext1_clear_wakeup_pins()                    lp_aon_ll_ext1_clear_wakeup_pins()
+#define rtc_hal_ext1_get_wakeup_pins()                      lp_aon_ll_ext1_get_wakeup_pins()
 
 #define lp_aon_hal_inform_wakeup_type(dslp)                 lp_aon_ll_inform_wakeup_type(dslp)
diff --git a/components/hal/esp32c6/include/hal/lp_aon_ll.h b/components/hal/esp32c6/include/hal/lp_aon_ll.h
index db08715964..22ae12dbf6 100644
--- a/components/hal/esp32c6/include/hal/lp_aon_ll.h
+++ b/components/hal/esp32c6/include/hal/lp_aon_ll.h
@@ -40,7 +40,7 @@ static inline void lp_aon_ll_ext1_clear_wakeup_status(void)
 /**
  * @brief Set the wake-up LP_IO of the ext1 wake-up source
  * @param mask wakeup LP_IO bitmap, bit 0~7 corresponds to LP_IO 0~7
- * @param mode 0: Wake the chip when all selected GPIOs go low
+ * @param mode 0: Wake the chip when any of the selected GPIOs go low
  *             1: Wake the chip when any of the selected GPIOs go high
  */
 static inline  void lp_aon_ll_ext1_set_wakeup_pins(uint32_t mask, int mode)
diff --git a/components/hal/esp32h2/include/hal/lp_aon_hal.h b/components/hal/esp32h2/include/hal/lp_aon_hal.h
new file mode 100644
index 0000000000..f3cd9e6b85
--- /dev/null
+++ b/components/hal/esp32h2/include/hal/lp_aon_hal.h
@@ -0,0 +1,17 @@
+/*
+ * SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#pragma once
+
+#include "hal/lp_aon_ll.h"
+
+#define rtc_hal_ext1_get_wakeup_status()                    lp_aon_ll_ext1_get_wakeup_status()
+#define rtc_hal_ext1_clear_wakeup_status()                  lp_aon_ll_ext1_clear_wakeup_status()
+#define rtc_hal_ext1_set_wakeup_pins(mask, mode)            lp_aon_ll_ext1_set_wakeup_pins(mask, mode)
+#define rtc_hal_ext1_clear_wakeup_pins()                    lp_aon_ll_ext1_clear_wakeup_pins()
+#define rtc_hal_ext1_get_wakeup_pins()                      lp_aon_ll_ext1_get_wakeup_pins()
+
+#define lp_aon_hal_inform_wakeup_type(dslp)                 lp_aon_ll_inform_wakeup_type(dslp)
diff --git a/components/hal/esp32h2/include/hal/lp_aon_ll.h b/components/hal/esp32h2/include/hal/lp_aon_ll.h
new file mode 100644
index 0000000000..f556def282
--- /dev/null
+++ b/components/hal/esp32h2/include/hal/lp_aon_ll.h
@@ -0,0 +1,97 @@
+/*
+ * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+// The LL layer for ESP32-H2 LP_AON register operations
+
+#pragma once
+
+#include <stdlib.h>
+#include "soc/soc.h"
+#include "soc/lp_aon_struct.h"
+#include "hal/misc.h"
+#include "esp32h2/rom/rtc.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief Get ext1 wakeup source status
+ * @return  The lower 8 bits of the returned value are the bitmap of
+ *          the wakeup source status, bit 0~7 corresponds to LP_IO 0~7
+ */
+static inline  uint32_t lp_aon_ll_ext1_get_wakeup_status(void)
+{
+    return HAL_FORCE_READ_U32_REG_FIELD(LP_AON.ext_wakeup_cntl, ext_wakeup_status);
+}
+
+/**
+ * @brief Clear the ext1 wakeup source status
+ */
+static inline void lp_aon_ll_ext1_clear_wakeup_status(void)
+{
+    HAL_FORCE_MODIFY_U32_REG_FIELD(LP_AON.ext_wakeup_cntl, ext_wakeup_status_clr, 1);
+}
+
+/**
+ * @brief Set the wake-up LP_IO of the ext1 wake-up source
+ * @param mask wakeup LP_IO bitmap, bit 0~7 corresponds to LP_IO 0~7
+ * @param mode 0: Wake the chip when any of the selected GPIOs go low
+ *             1: Wake the chip when any of the selected GPIOs go high
+ */
+static inline  void lp_aon_ll_ext1_set_wakeup_pins(uint32_t mask, int mode)
+{
+    uint32_t wakeup_sel_mask = HAL_FORCE_READ_U32_REG_FIELD(LP_AON.ext_wakeup_cntl, ext_wakeup_sel);
+    wakeup_sel_mask |= mask;
+    HAL_FORCE_MODIFY_U32_REG_FIELD(LP_AON.ext_wakeup_cntl, ext_wakeup_sel, wakeup_sel_mask);
+
+    uint32_t wakeup_level_mask = HAL_FORCE_READ_U32_REG_FIELD(LP_AON.ext_wakeup_cntl, ext_wakeup_lv);
+    if (mode) {
+        wakeup_level_mask |= mask;
+    } else {
+        wakeup_level_mask &= ~mask;
+    }
+    HAL_FORCE_MODIFY_U32_REG_FIELD(LP_AON.ext_wakeup_cntl, ext_wakeup_lv, wakeup_level_mask);
+}
+
+/**
+ * @brief Clear all ext1 wakup-source setting
+ */
+static inline  void lp_aon_ll_ext1_clear_wakeup_pins(void)
+{
+    HAL_FORCE_MODIFY_U32_REG_FIELD(LP_AON.ext_wakeup_cntl, ext_wakeup_sel, 0);
+}
+
+/**
+ * @brief Get ext1 wakeup source setting
+ * @return  The lower 8 bits of the returned value are the bitmap of
+ *          the wakeup source status, bit 0~7 corresponds to LP_IO 0~7
+ */
+static inline  uint32_t lp_aon_ll_ext1_get_wakeup_pins(void)
+{
+    return HAL_FORCE_READ_U32_REG_FIELD(LP_AON.ext_wakeup_cntl, ext_wakeup_sel);
+}
+
+
+/**
+ *  @brief ROM obtains the wake-up type through LP_AON_STORE9_REG[0].
+ *         Set the flag to inform
+ * @param true: deepsleep      false: lightsleep
+ */
+static inline  void lp_aon_ll_inform_wakeup_type(bool dslp)
+{
+    if (dslp) {
+        REG_SET_BIT(SLEEP_MODE_REG, BIT(0));    /* Tell rom to run deep sleep wake stub */
+
+    } else {
+        REG_CLR_BIT(SLEEP_MODE_REG, BIT(0));    /* Tell rom to run light sleep wake stub */
+    }
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/components/soc/esp32c6/include/soc/soc_caps.h b/components/soc/esp32c6/include/soc/soc_caps.h
index ddcb0f886f..52d9b8f7da 100644
--- a/components/soc/esp32c6/include/soc/soc_caps.h
+++ b/components/soc/esp32c6/include/soc/soc_caps.h
@@ -203,7 +203,10 @@
 
 /*-------------------------- RTCIO CAPS --------------------------------------*/
 #define SOC_RTCIO_PIN_COUNT                 8
-#define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED    1 // The target has separate LP(RTC) IOMUX
+#define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1  /* This macro indicates that the target has separate RTC IOMUX hardware feature,
+                                             * so it supports unique IOMUX configuration (including IE, OE, PU, PD, DRV etc.)
+                                             * when the pins are switched to RTC function.
+                                             */
 #define SOC_RTCIO_HOLD_SUPPORTED            1
 #define SOC_RTCIO_WAKE_SUPPORTED            1
 
diff --git a/components/soc/esp32h2/include/soc/Kconfig.soc_caps.in b/components/soc/esp32h2/include/soc/Kconfig.soc_caps.in
index 7dee2ca2c5..e019e99a72 100644
--- a/components/soc/esp32h2/include/soc/Kconfig.soc_caps.in
+++ b/components/soc/esp32h2/include/soc/Kconfig.soc_caps.in
@@ -175,6 +175,10 @@ config SOC_LP_TIMER_SUPPORTED
     bool
     default y
 
+config SOC_LP_AON_SUPPORTED
+    bool
+    default y
+
 config SOC_PAU_SUPPORTED
     bool
     default y
@@ -1103,6 +1107,10 @@ config SOC_PM_SUPPORT_BT_WAKEUP
     bool
     default y
 
+config SOC_PM_SUPPORT_EXT1_WAKEUP
+    bool
+    default y
+
 config SOC_PM_SUPPORT_CPU_PD
     bool
     default y
diff --git a/components/soc/esp32h2/include/soc/soc_caps.h b/components/soc/esp32h2/include/soc/soc_caps.h
index aa87cf7cee..845dffb21d 100644
--- a/components/soc/esp32h2/include/soc/soc_caps.h
+++ b/components/soc/esp32h2/include/soc/soc_caps.h
@@ -69,6 +69,7 @@
 #define SOC_APM_SUPPORTED               1
 #define SOC_PMU_SUPPORTED               1
 #define SOC_LP_TIMER_SUPPORTED          1
+#define SOC_LP_AON_SUPPORTED            1
 #define SOC_PAU_SUPPORTED               1
 #define SOC_CLK_TREE_SUPPORTED          1
 #define SOC_ASSIST_DEBUG_SUPPORTED      1
@@ -463,7 +464,7 @@
 
 /*-------------------------- Power Management CAPS ----------------------------*/
 #define SOC_PM_SUPPORT_BT_WAKEUP        (1)
-// #define SOC_PM_SUPPORT_EXT1_WAKEUP      (1) // TODO: IDF-6268
+#define SOC_PM_SUPPORT_EXT1_WAKEUP      (1)
 #define SOC_PM_SUPPORT_CPU_PD           (1)
 #define SOC_PM_SUPPORT_MODEM_PD         (1) /*!<modem includes BLE and 15.4 */
 #define SOC_PM_SUPPORT_XTAL32K_PD       (1)
diff --git a/components/soc/esp32s2/include/soc/soc_caps.h b/components/soc/esp32s2/include/soc/soc_caps.h
index 7ea6a91c03..669ff5773e 100644
--- a/components/soc/esp32s2/include/soc/soc_caps.h
+++ b/components/soc/esp32s2/include/soc/soc_caps.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -249,7 +249,10 @@
 
 /*-------------------------- RTCIO CAPS --------------------------------------*/
 #define SOC_RTCIO_PIN_COUNT   22
-#define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1 // The target has separate RTC IOMUX
+#define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1  /* This macro indicates that the target has separate RTC IOMUX hardware feature,
+                                             * so it supports unique IOMUX configuration (including IE, OE, PU, PD, DRV etc.)
+                                             * when the pins are switched to RTC function.
+                                             */
 #define SOC_RTCIO_HOLD_SUPPORTED 1
 #define SOC_RTCIO_WAKE_SUPPORTED 1
 
diff --git a/components/soc/esp32s3/include/soc/soc_caps.h b/components/soc/esp32s3/include/soc/soc_caps.h
index 0a6206dab3..6cd12bd56e 100644
--- a/components/soc/esp32s3/include/soc/soc_caps.h
+++ b/components/soc/esp32s3/include/soc/soc_caps.h
@@ -278,7 +278,10 @@
 
 /*-------------------------- RTCIO CAPS --------------------------------------*/
 #define SOC_RTCIO_PIN_COUNT   22
-#define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1 // The target has separate RTC IOMUX
+#define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1  /* This macro indicates that the target has separate RTC IOMUX hardware feature,
+                                             * so it supports unique IOMUX configuration (including IE, OE, PU, PD, DRV etc.)
+                                             * when the pins are switched to RTC function.
+                                             */
 #define SOC_RTCIO_HOLD_SUPPORTED 1
 #define SOC_RTCIO_WAKE_SUPPORTED 1
 
diff --git a/examples/system/deep_sleep/main/Kconfig.projbuild b/examples/system/deep_sleep/main/Kconfig.projbuild
index 97793a8209..281703bcd9 100644
--- a/examples/system/deep_sleep/main/Kconfig.projbuild
+++ b/examples/system/deep_sleep/main/Kconfig.projbuild
@@ -32,20 +32,192 @@ menu "Example Configuration"
             floating pins. When triggering a wake up, connect one or both of the pins to HIGH. Note that floating
             pins may trigger a wake up.
 
-    config EXAMPLE_EXT1_USE_INTERNAL_PULLUPS
-        bool "Use internal pull-up/downs for EXT1 wakeup source"
-        default n
-        depends on EXAMPLE_EXT1_WAKEUP
-        help
-            When using EXT1 wakeup source without external pull-up/downs, you may want to make use of the internal
-            ones.
+    menu "EXT1 wakeup configuration"
+        visible if EXAMPLE_EXT1_WAKEUP
 
-            However, the RTC IO reside in the RTC Periph power domain. Enable this option to force that power domain
-            ON during deep sleep. Note that this will increase some power comsumption, so it's still suggested to use
-            external ones instead.
+        config EXAMPLE_EXT1_WAKEUP_PIN_1
+            int "Enable wakeup from PIN_1"
+            depends on !IDF_TARGET_ESP32
+            default 2 if !IDF_TARGET_ESP32H2
+            default 10 if IDF_TARGET_ESP32H2
+            range 0 7 if IDF_TARGET_ESP32C6
+            range 7 14 if IDF_TARGET_ESP32H2
+            range 0 21 if IDF_TARGET_ESP32S2
+            range 0 21 if IDF_TARGET_ESP32S3
 
-            EXT0 wakeup source resides in the same power domain as RTCIO (RTC Periph), so internal pull-up/downs are
-            always available. There's no need to explicitly force it on for EXT0.
+        choice EXAMPLE_EXT1_WAKEUP_PIN_1_SEL
+            prompt "Enable wakeup from PIN_1"
+            default EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_2
+            depends on IDF_TARGET_ESP32
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_0
+                bool "GPIO 0"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_2
+                bool "GPIO 2"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_4
+                bool "GPIO 4"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_12
+                bool "GPIO 12"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_13
+                bool "GPIO 13"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_14
+                bool "GPIO 14"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_15
+                bool "GPIO 15"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_25
+                bool "GPIO 25"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_26
+                bool "GPIO 26"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_27
+                bool "GPIO 27"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_32
+                bool "GPIO 32"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_33
+                bool "GPIO 33"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_34
+                bool "GPIO 34"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_35
+                bool "GPIO 35"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_36
+                bool "GPIO 36"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_37
+                bool "GPIO 37"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_38
+                bool "GPIO 38"
+            config EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_39
+                bool "GPIO 39"
+        endchoice
+
+        config EXAMPLE_EXT1_WAKEUP_PIN_1
+            int
+            depends on IDF_TARGET_ESP32
+            default 0 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_0
+            default 2 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_2
+            default 4 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_4
+            default 12 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_12
+            default 13 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_13
+            default 14 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_14
+            default 15 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_15
+            default 25 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_25
+            default 26 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_26
+            default 27 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_27
+            default 32 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_32
+            default 33 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_33
+            default 34 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_34
+            default 35 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_35
+            default 36 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_36
+            default 37 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_37
+            default 38 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_38
+            default 39 if EXAMPLE_EXT1_WAKEUP_PIN_1_SEL_39
+
+        config EXAMPLE_EXT1_WAKEUP_PIN_2
+            int "Enable wakeup from PIN_2"
+            depends on !IDF_TARGET_ESP32
+            default 4 if !IDF_TARGET_ESP32H2
+            default 11 if IDF_TARGET_ESP32H2
+            range 0 7 if IDF_TARGET_ESP32C6
+            range 7 14 if IDF_TARGET_ESP32H2
+            range 0 21 if IDF_TARGET_ESP32S2
+            range 0 21 if IDF_TARGET_ESP32S3
+
+        choice EXAMPLE_EXT1_WAKEUP_PIN_2_SEL
+            prompt "Enable wakeup from PIN_2"
+            default EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_4
+            depends on IDF_TARGET_ESP32
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_0
+                bool "GPIO 0"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_2
+                bool "GPIO 2"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_4
+                bool "GPIO 4"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_12
+                bool "GPIO 12"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_13
+                bool "GPIO 13"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_14
+                bool "GPIO 14"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_15
+                bool "GPIO 15"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_25
+                bool "GPIO 25"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_26
+                bool "GPIO 26"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_27
+                bool "GPIO 27"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_32
+                bool "GPIO 32"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_33
+                bool "GPIO 33"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_34
+                bool "GPIO 34"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_35
+                bool "GPIO 35"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_36
+                bool "GPIO 36"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_37
+                bool "GPIO 37"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_38
+                bool "GPIO 38"
+            config EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_39
+                bool "GPIO 39"
+        endchoice
+
+        config EXAMPLE_EXT1_WAKEUP_PIN_2
+            int
+            depends on IDF_TARGET_ESP32
+            default 0 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_0
+            default 2 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_2
+            default 4 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_4
+            default 12 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_12
+            default 13 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_13
+            default 14 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_14
+            default 15 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_15
+            default 25 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_25
+            default 26 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_26
+            default 27 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_27
+            default 32 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_32
+            default 33 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_33
+            default 34 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_34
+            default 35 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_35
+            default 36 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_36
+            default 37 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_37
+            default 38 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_38
+            default 39 if EXAMPLE_EXT1_WAKEUP_PIN_2_SEL_39
+
+        choice EXAMPLE_EXT1_WAKEUP_MODE_SEL
+            prompt "Select wakeup mode from EXT1"
+            default ESP_EXT1_WAKEUP_ANY_HIGH
+            config ESP_EXT1_WAKEUP_ANY_LOW
+                bool "GPIO any low level"
+                depends on !IDF_TARGET_ESP32
+            config ESP_EXT1_WAKEUP_ALL_LOW
+                bool "GPIO all low level"
+                depends on IDF_TARGET_ESP32
+            config ESP_EXT1_WAKEUP_ANY_HIGH
+                bool "GPIO any high level"
+        endchoice
+
+        config EXAMPLE_EXT1_WAKEUP_MODE
+            int
+            default 0 if ESP_EXT1_WAKEUP_ANY_LOW
+            default 0 if ESP_EXT1_WAKEUP_ALL_LOW
+            default 1 if ESP_EXT1_WAKEUP_ANY_HIGH
+
+        config EXAMPLE_EXT1_USE_INTERNAL_PULLUPS
+            bool "Use internal pull-up/downs for EXT1 wakeup source"
+            default n
+            depends on EXAMPLE_EXT1_WAKEUP
+            help
+                When using EXT1 wakeup source without external pull-up/downs, you may want to make use of
+                the internal ones.
+
+                if we turn off the RTC_PERIPH domain or if certain chips lack the RTC_PERIPH domain,
+                we will use the HOLD feature to maintain the pull-up and pull-down on the pins during sleep.
+                but if we turn on the RTC_PERIPH domain, we don not need to use HOLD feature and this will
+                increase some power comsumption.
+
+                EXT0 wakeup source resides in the same power domain as RTCIO (RTC Periph), so internal
+                pull-up/downs are always available. There's no need to explicitly force it on for EXT0.
+    endmenu
 
     config EXAMPLE_GPIO_WAKEUP
         bool "Enable wakeup from GPIO"
@@ -60,11 +232,9 @@ menu "Example Configuration"
 
         config EXAMPLE_GPIO_WAKEUP_PIN
             int "Enable wakeup from GPIO"
-            default 0 if !IDF_TARGET_ESP32H2
-            default 7 if IDF_TARGET_ESP32H2
+            default 0
             range 0 7 if IDF_TARGET_ESP32C6
-            range 7 14 if IDF_TARGET_ESP32H2
-            range 0 5 if !IDF_TARGET_ESP32C6 && !IDF_TARGET_ESP32H2
+            range 0 5 if !IDF_TARGET_ESP32C6
 
         config EXAMPLE_GPIO_WAKEUP_HIGH_LEVEL
             bool "Enable GPIO high-level wakeup"
diff --git a/examples/system/deep_sleep/main/ext_wakeup.c b/examples/system/deep_sleep/main/ext_wakeup.c
index 72ce6b0a6c..e6cc7ac10a 100644
--- a/examples/system/deep_sleep/main/ext_wakeup.c
+++ b/examples/system/deep_sleep/main/ext_wakeup.c
@@ -9,6 +9,7 @@
 #include "sdkconfig.h"
 #include "driver/rtc_io.h"
 
+
 #if CONFIG_EXAMPLE_EXT0_WAKEUP
 #if CONFIG_IDF_TARGET_ESP32
     const int ext_wakeup_pin_0 = 25;
@@ -32,24 +33,46 @@ void example_deep_sleep_register_ext0_wakeup(void)
 #if CONFIG_EXAMPLE_EXT1_WAKEUP
 void example_deep_sleep_register_ext1_wakeup(void)
 {
-    const int ext_wakeup_pin_1 = 2;
+    const int ext_wakeup_pin_1 = CONFIG_EXAMPLE_EXT1_WAKEUP_PIN_1;
+    const int ext_wakeup_pin_2 = CONFIG_EXAMPLE_EXT1_WAKEUP_PIN_2;
     const uint64_t ext_wakeup_pin_1_mask = 1ULL << ext_wakeup_pin_1;
-    const int ext_wakeup_pin_2 = 4;
     const uint64_t ext_wakeup_pin_2_mask = 1ULL << ext_wakeup_pin_2;
-
     printf("Enabling EXT1 wakeup on pins GPIO%d, GPIO%d\n", ext_wakeup_pin_1, ext_wakeup_pin_2);
-    ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(ext_wakeup_pin_1_mask | ext_wakeup_pin_2_mask, ESP_EXT1_WAKEUP_ANY_HIGH));
+    const esp_sleep_ext1_wakeup_mode_t ext_wakeup_mode = CONFIG_EXAMPLE_EXT1_WAKEUP_MODE;
+
+    ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(ext_wakeup_pin_1_mask | ext_wakeup_pin_2_mask, ext_wakeup_mode));
 
     /* If there are no external pull-up/downs, tie wakeup pins to inactive level with internal pull-up/downs via RTC IO
      * during deepsleep. However, RTC IO relies on the RTC_PERIPH power domain. Keeping this power domain on will
-     * increase some power comsumption. */
+     * increase some power comsumption. However, if we turn off the RTC_PERIPH domain or if certain chips lack the RTC_PERIPH
+     * domain, we will use the HOLD feature to maintain the pull-up and pull-down on the pins during sleep.*/
 #if CONFIG_EXAMPLE_EXT1_USE_INTERNAL_PULLUPS
-    ESP_ERROR_CHECK(esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON));
-    ESP_ERROR_CHECK(rtc_gpio_pullup_dis(ext_wakeup_pin_1));
-    ESP_ERROR_CHECK(rtc_gpio_pulldown_en(ext_wakeup_pin_1));
-    ESP_ERROR_CHECK(rtc_gpio_pullup_dis(ext_wakeup_pin_2));
-    ESP_ERROR_CHECK(rtc_gpio_pulldown_en(ext_wakeup_pin_2));
-#endif //CONFIG_EXAMPLE_EXT1_USE_INTERNAL_PULLUPS
+#if SOC_RTCIO_INPUT_OUTPUT_SUPPORTED
+    if (ext_wakeup_mode) {
+        ESP_ERROR_CHECK(rtc_gpio_pullup_dis(ext_wakeup_pin_1));
+        ESP_ERROR_CHECK(rtc_gpio_pulldown_en(ext_wakeup_pin_1));
+        ESP_ERROR_CHECK(rtc_gpio_pullup_dis(ext_wakeup_pin_2));
+        ESP_ERROR_CHECK(rtc_gpio_pulldown_en(ext_wakeup_pin_2));
+    } else {
+        ESP_ERROR_CHECK(rtc_gpio_pulldown_dis(ext_wakeup_pin_1));
+        ESP_ERROR_CHECK(rtc_gpio_pullup_en(ext_wakeup_pin_1));
+        ESP_ERROR_CHECK(rtc_gpio_pulldown_dis(ext_wakeup_pin_2));
+        ESP_ERROR_CHECK(rtc_gpio_pullup_en(ext_wakeup_pin_2));
+    }
+#else
+    if (ext_wakeup_mode) {
+        ESP_ERROR_CHECK(gpio_pullup_dis(ext_wakeup_pin_1));
+        ESP_ERROR_CHECK(gpio_pulldown_en(ext_wakeup_pin_1));
+        ESP_ERROR_CHECK(gpio_pullup_dis(ext_wakeup_pin_2));
+        ESP_ERROR_CHECK(gpio_pulldown_en(ext_wakeup_pin_2));
+    } else {
+        ESP_ERROR_CHECK(gpio_pulldown_dis(ext_wakeup_pin_1));
+        ESP_ERROR_CHECK(gpio_pullup_en(ext_wakeup_pin_1));
+        ESP_ERROR_CHECK(gpio_pulldown_dis(ext_wakeup_pin_2));
+        ESP_ERROR_CHECK(gpio_pullup_en(ext_wakeup_pin_2));
+    }
+#endif
+#endif // CONFIG_EXAMPLE_EXT1_USE_INTERNAL_PULLUPS
 }
 
 #endif // CONFIG_EXAMPLE_EXT1_WAKEUP