diff --git a/components/esp_hw_support/port/esp32s3/rtc_clk.c b/components/esp_hw_support/port/esp32s3/rtc_clk.c
index f85af1317a..e9b01499b4 100644
--- a/components/esp_hw_support/port/esp32s3/rtc_clk.c
+++ b/components/esp_hw_support/port/esp32s3/rtc_clk.c
@@ -203,6 +203,7 @@ void rtc_clk_bbpll_configure(rtc_xtal_freq_t xtal_freq, int pll_freq)
     uint8_t dcur;
     uint8_t dbias;
 
+    /* BBPLL CALIBRATION START */
     CLEAR_PERI_REG_MASK(I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_HIGH);
     SET_PERI_REG_MASK(I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_LOW);
 
@@ -277,15 +278,19 @@ void rtc_clk_bbpll_configure(rtc_xtal_freq_t xtal_freq, int pll_freq)
     }
     uint8_t i2c_bbpll_lref  = (dchgp << I2C_BBPLL_OC_DCHGP_LSB) | (div_ref);
     uint8_t i2c_bbpll_div_7_0 = div7_0;
-    uint8_t i2c_bbpll_dcur = (1 << I2C_BBPLL_OC_DLREF_SEL_LSB ) | (2 << I2C_BBPLL_OC_DHREF_SEL_LSB) | dcur;
+    uint8_t i2c_bbpll_dcur = (1 << I2C_BBPLL_OC_DLREF_SEL_LSB ) | (3 << I2C_BBPLL_OC_DHREF_SEL_LSB) | dcur;
     REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_OC_REF_DIV, i2c_bbpll_lref);
     REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_OC_DIV_7_0, i2c_bbpll_div_7_0);
     REGI2C_WRITE_MASK(I2C_BBPLL, I2C_BBPLL_OC_DR1, dr1);
     REGI2C_WRITE_MASK(I2C_BBPLL, I2C_BBPLL_OC_DR3, dr3);
     REGI2C_WRITE(I2C_BBPLL, I2C_BBPLL_OC_DCUR, i2c_bbpll_dcur);
     REGI2C_WRITE_MASK(I2C_BBPLL, I2C_BBPLL_OC_VCO_DBIAS, dbias);
-    REGI2C_WRITE_MASK(I2C_BBPLL, I2C_BBPLL_OC_DHREF_SEL, 2);
-    REGI2C_WRITE_MASK(I2C_BBPLL, I2C_BBPLL_OC_DLREF_SEL, 1);
+
+    /* WAIT CALIBRATION DONE */
+    while (!GET_PERI_REG_MASK(I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_CAL_DONE));
+    /* BBPLL CALIBRATION STOP */
+    CLEAR_PERI_REG_MASK(I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_LOW);
+    SET_PERI_REG_MASK(I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_HIGH);
     s_cur_pll_freq = pll_freq;
 }
 
diff --git a/components/soc/esp32s3/include/soc/regi2c_defs.h b/components/soc/esp32s3/include/soc/regi2c_defs.h
index 1daf44802a..c3344e65c1 100644
--- a/components/soc/esp32s3/include/soc/regi2c_defs.h
+++ b/components/soc/esp32s3/include/soc/regi2c_defs.h
@@ -12,6 +12,7 @@
 #define I2C_MST_ANA_CONF0_REG  0x6000E040
 #define I2C_MST_BBPLL_STOP_FORCE_HIGH  (BIT(2))
 #define I2C_MST_BBPLL_STOP_FORCE_LOW  (BIT(3))
+#define I2C_MST_BBPLL_CAL_DONE  (BIT(24))
 
 #define ANA_CONFIG_REG  0x6000E044
 #define ANA_CONFIG_S    (8)