ci: cleanup, combine and remove old ttfw unit test app configs

tools/unit-test-app/configs/default_2_c2

@@ -1,7 +0,0 @@
-# This config is split between targets since different component needs to be included
-CONFIG_IDF_TARGET="esp32c2"
-TEST_COMPONENTS=app_trace esp_eth esp_hid esp_phy esp_wifi espcoredump hal lwip mdns newlib partition_table sdmmc
-CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE=n
-CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT=y
-CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC=n
-CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=n

tools/unit-test-app/configs/default_2_c6

@@ -1,3 +0,0 @@
-# This config is split between targets since different component needs to be included
-CONFIG_IDF_TARGET="esp32c6"
-TEST_COMPONENTS=app_trace esp_eth esp_hid esp_phy esp_wifi espcoredump hal lwip mdns newlib partition_table sdmmc

tools/unit-test-app/configs/default_2_h2

@@ -1,3 +0,0 @@
-# This config is split between targets since different component needs to be included
-CONFIG_IDF_TARGET="esp32h2"
-TEST_COMPONENTS=app_trace esp_eth esp_hid esp_netif esp_phy esp_wifi espcoredump hal lwip mdns newlib partition_table sdmmc

tools/unit-test-app/configs/default_2_s2

@@ -1,3 +0,0 @@
-# This config is split between targets since different component needs to be excluded (esp32, esp32s2)
-CONFIG_IDF_TARGET="esp32s2"
-TEST_EXCLUDE_COMPONENTS=bt driver soc spi_flash

tools/unit-test-app/configs/default_2_s3

@@ -1,3 +0,0 @@
-# This config is split between targets since different component needs to be excluded (esp32, esp32s2)
-CONFIG_IDF_TARGET="esp32s3"
-TEST_EXCLUDE_COMPONENTS=bt esp32s3 driver soc spi_flash test_utils

tools/unit-test-app/configs/default_32_2

@@ -1,3 +0,0 @@
-# continue from default
-CONFIG_IDF_TARGET="esp32"
-TEST_COMPONENTS=spi_flash

tools/unit-test-app/configs/default_3_c2

@@ -1,3 +0,0 @@
-# This config is split between targets since different component needs to be included
-CONFIG_IDF_TARGET="esp32c2"
-TEST_EXCLUDE_COMPONENTS=app_trace esp_eth esp_hid esp_netif esp_phy esp_ringbuf esp_wifi espcoredump hal lwip mdns newlib partition_table sdmmc driver soc spi_flash

tools/unit-test-app/configs/default_3_c3

@@ -1,3 +0,0 @@
-# This config is split between targets since different component needs to be included
-CONFIG_IDF_TARGET="esp32c3"
-TEST_COMPONENTS=spi_flash lwip

tools/unit-test-app/configs/default_3_c6

@@ -1,3 +0,0 @@
-# This config is split between targets since different component needs to be included
-CONFIG_IDF_TARGET="esp32c6"
-TEST_EXCLUDE_COMPONENTS=app_trace esp_eth esp_hid esp_netif esp_phy esp_ringbuf esp_wifi espcoredump hal lwip mdns newlib partition_table sdmmc driver soc spi_flash

tools/unit-test-app/configs/default_3_h2

@@ -1,3 +0,0 @@
-# This config is split between targets since different component needs to be included
-CONFIG_IDF_TARGET="esp32h2"
-TEST_EXCLUDE_COMPONENTS=app_trace esp_eth esp_hid esp_netif esp_phy esp_ringbuf esp_wifi espcoredump hal lwip mdns newlib partition_table sdmmc driver soc spi_flash

tools/unit-test-app/configs/default_c2

@@ -1,3 +1,8 @@
 # This config is split between targets since different component needs to be included
 CONFIG_IDF_TARGET="esp32c2"
-TEST_COMPONENTS= soc spi_flash
+# spi_flash is tested in other configs
+TEST_EXCLUDE_COMPONENTS=spi_flash
+CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE=n
+CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT=y
+CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC=n
+CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=n

tools/unit-test-app/configs/default_c3

@@ -1,3 +1,4 @@
 # This config is split between targets since different component needs to be excluded
 CONFIG_IDF_TARGET="esp32c3"
-TEST_EXCLUDE_COMPONENTS=bt driver soc spi_flash lwip spiffs perfmon test_utils
+# spi_flash is tested in other configs
+TEST_EXCLUDE_COMPONENTS=spi_flash

tools/unit-test-app/configs/default_c6

@@ -1,3 +1,4 @@
 # This config is split between targets since different component needs to be included
 CONFIG_IDF_TARGET="esp32c6"
-TEST_COMPONENTS=spi_flash
+# spi_flash is tested in other configs
+TEST_EXCLUDE_COMPONENTS=spi_flash

tools/unit-test-app/configs/default_esp32

@@ -1,3 +1,4 @@
 # This config is split between targets since different component needs to be excluded (esp32, esp32s2)
 CONFIG_IDF_TARGET="esp32"
-TEST_EXCLUDE_COMPONENTS=bt driver soc spi_flash test_utils
+# spi_flash are tested in other configs
+TEST_EXCLUDE_COMPONENTS=spi_flash test_utils

tools/unit-test-app/configs/default_h2

@@ -1,3 +1,4 @@
 # This config is split between targets since different component needs to be included
 CONFIG_IDF_TARGET="esp32h2"
-TEST_COMPONENTS=spi_flash
+# spi_flash is tested in other configs
+TEST_EXCLUDE_COMPONENTS=spi_flash

tools/unit-test-app/configs/default_s2

@@ -1,4 +1,5 @@
-# This config is split between targets since different component needs to be included (esp32, esp32s2)
+# This config is split between targets since different component needs to be included
 CONFIG_IDF_TARGET="esp32s2"
-TEST_COMPONENTS=spi_flash test_utils
+# spi_flash is tested in other configs
+TEST_EXCLUDE_COMPONENTS=spi_flash
 CONFIG_ESP32S2_RTCDATA_IN_FAST_MEM=y

tools/unit-test-app/configs/default_s2_2

@@ -1,3 +0,0 @@
-# This config is split between targets since different component needs to be included (esp32, esp32s2)
-CONFIG_IDF_TARGET="esp32s2"
-TEST_COMPONENTS=spi_flash

tools/unit-test-app/configs/default_s3

@@ -1,3 +1,4 @@
 # This config is split between targets since different component needs to be included
 CONFIG_IDF_TARGET="esp32s3"
-TEST_COMPONENTS=spi_flash
+# spi_flash is tested in other configs
+TEST_EXCLUDE_COMPONENTS=spi_flash test_utils

tools/unit-test-app/configs/no_optimization_c6

@@ -1,3 +1,3 @@
 CONFIG_IDF_TARGET="esp32c6"
-TEST_COMPONENTS=esp_ipc spi_flash
+TEST_COMPONENTS=spi_flash
 CONFIG_COMPILER_OPTIMIZATION_NONE=y

tools/unit-test-app/configs/no_optimization_h2

@@ -1,3 +1,3 @@
 CONFIG_IDF_TARGET="esp32h2"
-TEST_COMPONENTS=esp_ipc spi_flash
+TEST_COMPONENTS=spi_flash
 CONFIG_COMPILER_OPTIMIZATION_NONE=y

tools/unit-test-app/configs/psram

@@ -1,5 +1,5 @@
 CONFIG_IDF_TARGET="esp32"
-TEST_EXCLUDE_COMPONENTS=bt driver spi_flash test_utils soc esp-tls sdmmc
+TEST_EXCLUDE_COMPONENTS=bt driver spi_flash test_utils esp-tls
 CONFIG_SPIRAM=y
 CONFIG_ESP_INT_WDT_TIMEOUT_MS=800
 CONFIG_SPIRAM_OCCUPY_NO_HOST=y

tools/unit-test-app/configs/psram_2

@@ -1,5 +1,5 @@
 CONFIG_IDF_TARGET="esp32"
-TEST_COMPONENTS=spi_flash soc
+TEST_COMPONENTS=spi_flash
 CONFIG_SPIRAM=y
 CONFIG_ESP_INT_WDT_TIMEOUT_MS=800
 CONFIG_SPIRAM_OCCUPY_NO_HOST=y

tools/unit-test-app/configs/psram_3

@@ -1,6 +0,0 @@
-CONFIG_IDF_TARGET="esp32"
-TEST_COMPONENTS=sdmmc
-CONFIG_SPIRAM=y
-CONFIG_ESP_INT_WDT_TIMEOUT_MS=800
-CONFIG_SPIRAM_OCCUPY_NO_HOST=y
-CONFIG_ESP_WIFI_RX_IRAM_OPT=n

tools/unit-test-app/configs/release

@@ -1,5 +1,5 @@
 CONFIG_IDF_TARGET="esp32"
-TEST_COMPONENTS=driver soc spi_flash
+TEST_EXCLUDE_COMPONENTS=test_utils
 CONFIG_COMPILER_OPTIMIZATION_SIZE=y
 CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y

tools/unit-test-app/configs/release_2

@@ -1,6 +0,0 @@
-# This config is split between targets since different component needs to be included (esp32, esp32s2)
-CONFIG_IDF_TARGET="esp32"
-TEST_EXCLUDE_COMPONENTS=bt driver soc spi_flash test_utils
-CONFIG_COMPILER_OPTIMIZATION_SIZE=y
-CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
-CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y

tools/unit-test-app/configs/release_2_s2

@@ -1,6 +0,0 @@
-# This config is split between targets since different component needs to be excluded (esp32, esp32s2)
-CONFIG_IDF_TARGET="esp32s2"
-TEST_EXCLUDE_COMPONENTS=bt driver soc spi_flash test_utils
-CONFIG_COMPILER_OPTIMIZATION_SIZE=y
-CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
-CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y

tools/unit-test-app/configs/release_c2

@@ -1,5 +1,9 @@
 CONFIG_IDF_TARGET="esp32c2"
-TEST_COMPONENTS=spi_flash sdmmc
+TEST_EXCLUDE_COMPONENTS=test_utils
 CONFIG_COMPILER_OPTIMIZATION_SIZE=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y
 CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE=n
+CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT=y
+CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC=n
+CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=n

tools/unit-test-app/configs/release_c3_2

@@ -1,5 +0,0 @@
-CONFIG_IDF_TARGET="esp32c3"
-TEST_COMPONENTS=spi_flash sdmmc
-CONFIG_COMPILER_OPTIMIZATION_SIZE=y
-CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y
-CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y

tools/unit-test-app/configs/release_c6

@@ -1,5 +1,5 @@
 CONFIG_IDF_TARGET="esp32c6"
-TEST_COMPONENTS=esp_ipc spi_flash sdmmc
+TEST_EXCLUDE_COMPONENTS=test_utils
 CONFIG_COMPILER_OPTIMIZATION_SIZE=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y
 CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y

tools/unit-test-app/configs/release_h2

@@ -1,5 +1,5 @@
 CONFIG_IDF_TARGET="esp32h2"
-TEST_COMPONENTS=esp_ipc spi_flash sdmmc
+TEST_EXCLUDE_COMPONENTS=test_utils
 CONFIG_COMPILER_OPTIMIZATION_SIZE=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y
 CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y

tools/unit-test-app/configs/release_s2

@@ -1,6 +1,6 @@
 # This config is split between targets since different component needs to be included (esp32, esp32s2)
 CONFIG_IDF_TARGET="esp32s2"
-TEST_COMPONENTS=spi_flash
+TEST_EXCLUDE_COMPONENTS=test_utils
 CONFIG_COMPILER_OPTIMIZATION_SIZE=y
 CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y

tools/unit-test-app/configs/release_s3

@@ -1,5 +1,5 @@
 CONFIG_IDF_TARGET="esp32s3"
-TEST_COMPONENTS=spi_flash
+TEST_EXCLUDE_COMPONENTS=test_utils
 CONFIG_COMPILER_OPTIMIZATION_SIZE=y
 CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y

tools/unit-test-app/configs/single_core

@@ -1,6 +1,5 @@
-# This config is split between targets since different component needs to be included (esp32, esp32s2)
 CONFIG_IDF_TARGET="esp32"
-TEST_COMPONENTS=spi_flash
+TEST_EXCLUDE_COMPONENTS=test_utils
 CONFIG_FREERTOS_UNICORE=y
 CONFIG_ESP32_IRAM_AS_8BIT_ACCESSIBLE_MEMORY=y
 CONFIG_ESP32_RTCDATA_IN_FAST_MEM=y

tools/unit-test-app/configs/single_core_2

@@ -1,5 +0,0 @@
-# This config is split between targets since different component needs to be excluded (esp32, esp32s2)
-CONFIG_IDF_TARGET="esp32"
-TEST_EXCLUDE_COMPONENTS=bt driver soc spi_flash test_utils
-CONFIG_FREERTOS_UNICORE=y
-CONFIG_ESP32_RTCDATA_IN_FAST_MEM=y

tools/unit-test-app/configs/single_core_2_s2

@@ -1,5 +0,0 @@
-# This config is split between targets since different component needs to be excluded (esp32, esp32s2)
-CONFIG_IDF_TARGET="esp32s2"
-TEST_EXCLUDE_COMPONENTS=bt driver soc spi_flash
-CONFIG_FREERTOS_UNICORE=y
-CONFIG_ESP32S2_RTCDATA_IN_FAST_MEM=y