diff --git a/examples/peripherals/lcd/gc9a01/main/CMakeLists.txt b/examples/peripherals/lcd/gc9a01/main/CMakeLists.txt
deleted file mode 100644
index 6baba7b9eb..0000000000
--- a/examples/peripherals/lcd/gc9a01/main/CMakeLists.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-idf_component_register(SRCS "esp_lcd_panel_gc9a01.c" "gc9a01_example_main.c" "lvgl_demo_ui.c"
-                       INCLUDE_DIRS ".")
diff --git a/examples/peripherals/lcd/gc9a01/main/esp_lcd_panel_gc9a01.c b/examples/peripherals/lcd/gc9a01/main/esp_lcd_panel_gc9a01.c
deleted file mode 100644
index dd63de01d1..0000000000
--- a/examples/peripherals/lcd/gc9a01/main/esp_lcd_panel_gc9a01.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-#include <stdlib.h>
-#include <sys/cdefs.h>
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "esp_lcd_panel_interface.h"
-#include "esp_lcd_panel_io.h"
-#include "esp_lcd_panel_vendor.h"
-#include "esp_lcd_panel_ops.h"
-#include "esp_lcd_panel_commands.h"
-#include "driver/gpio.h"
-#include "esp_log.h"
-#include "esp_check.h"
-
-static const char *TAG = "gc9a01";
-
-static esp_err_t panel_gc9a01_del(esp_lcd_panel_t *panel);
-static esp_err_t panel_gc9a01_reset(esp_lcd_panel_t *panel);
-static esp_err_t panel_gc9a01_init(esp_lcd_panel_t *panel);
-static esp_err_t panel_gc9a01_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data);
-static esp_err_t panel_gc9a01_invert_color(esp_lcd_panel_t *panel, bool invert_color_data);
-static esp_err_t panel_gc9a01_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y);
-static esp_err_t panel_gc9a01_swap_xy(esp_lcd_panel_t *panel, bool swap_axes);
-static esp_err_t panel_gc9a01_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap);
-static esp_err_t panel_gc9a01_disp_on_off(esp_lcd_panel_t *panel, bool off);
-
-typedef struct {
-    esp_lcd_panel_t base;
-    esp_lcd_panel_io_handle_t io;
-    int reset_gpio_num;
-    bool reset_level;
-    int x_gap;
-    int y_gap;
-    unsigned int bits_per_pixel;
-    uint8_t madctl_val; // save current value of LCD_CMD_MADCTL register
-    uint8_t colmod_cal; // save surrent value of LCD_CMD_COLMOD register
-} gc9a01_panel_t;
-
-esp_err_t esp_lcd_new_panel_gc9a01(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel)
-{
-    esp_err_t ret = ESP_OK;
-    gc9a01_panel_t *gc9a01 = NULL;
-    ESP_GOTO_ON_FALSE(io && panel_dev_config && ret_panel, ESP_ERR_INVALID_ARG, err, TAG, "invalid argument");
-    gc9a01 = calloc(1, sizeof(gc9a01_panel_t));
-    ESP_GOTO_ON_FALSE(gc9a01, ESP_ERR_NO_MEM, err, TAG, "no mem for gc9a01 panel");
-
-    if (panel_dev_config->reset_gpio_num >= 0) {
-        gpio_config_t io_conf = {
-            .mode = GPIO_MODE_OUTPUT,
-            .pin_bit_mask = 1ULL << panel_dev_config->reset_gpio_num,
-        };
-        ESP_GOTO_ON_ERROR(gpio_config(&io_conf), err, TAG, "configure GPIO for RST line failed");
-    }
-
-    switch (panel_dev_config->color_space) {
-    case ESP_LCD_COLOR_SPACE_RGB:
-        gc9a01->madctl_val = 0;
-        break;
-    case ESP_LCD_COLOR_SPACE_BGR:
-        gc9a01->madctl_val |= LCD_CMD_BGR_BIT;
-        break;
-    default:
-        ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported color space");
-        break;
-    }
-
-    switch (panel_dev_config->bits_per_pixel) {
-    case 16:
-        gc9a01->colmod_cal = 0x55;
-        break;
-    case 18:
-        gc9a01->colmod_cal = 0x66;
-        break;
-    default:
-        ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported pixel width");
-        break;
-    }
-
-    gc9a01->io = io;
-    gc9a01->bits_per_pixel = panel_dev_config->bits_per_pixel;
-    gc9a01->reset_gpio_num = panel_dev_config->reset_gpio_num;
-    gc9a01->reset_level = panel_dev_config->flags.reset_active_high;
-    gc9a01->base.del = panel_gc9a01_del;
-    gc9a01->base.reset = panel_gc9a01_reset;
-    gc9a01->base.init = panel_gc9a01_init;
-    gc9a01->base.draw_bitmap = panel_gc9a01_draw_bitmap;
-    gc9a01->base.invert_color = panel_gc9a01_invert_color;
-    gc9a01->base.set_gap = panel_gc9a01_set_gap;
-    gc9a01->base.mirror = panel_gc9a01_mirror;
-    gc9a01->base.swap_xy = panel_gc9a01_swap_xy;
-    gc9a01->base.disp_on_off = panel_gc9a01_disp_on_off;
-    *ret_panel = &(gc9a01->base);
-    ESP_LOGD(TAG, "new gc9a01 panel @%p", gc9a01);
-
-    return ESP_OK;
-
-err:
-    if (gc9a01) {
-        if (panel_dev_config->reset_gpio_num >= 0) {
-            gpio_reset_pin(panel_dev_config->reset_gpio_num);
-        }
-        free(gc9a01);
-    }
-    return ret;
-}
-
-static esp_err_t panel_gc9a01_del(esp_lcd_panel_t *panel)
-{
-    gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
-
-    if (gc9a01->reset_gpio_num >= 0) {
-        gpio_reset_pin(gc9a01->reset_gpio_num);
-    }
-    ESP_LOGD(TAG, "del gc9a01 panel @%p", gc9a01);
-    free(gc9a01);
-    return ESP_OK;
-}
-
-static esp_err_t panel_gc9a01_reset(esp_lcd_panel_t *panel)
-{
-    gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
-    esp_lcd_panel_io_handle_t io = gc9a01->io;
-
-    // perform hardware reset
-    if (gc9a01->reset_gpio_num >= 0) {
-        gpio_set_level(gc9a01->reset_gpio_num, gc9a01->reset_level);
-        vTaskDelay(pdMS_TO_TICKS(10));
-        gpio_set_level(gc9a01->reset_gpio_num, !gc9a01->reset_level);
-        vTaskDelay(pdMS_TO_TICKS(10));
-    } else { // perform software reset
-        esp_lcd_panel_io_tx_param(io, LCD_CMD_SWRESET, NULL, 0);
-        vTaskDelay(pdMS_TO_TICKS(20)); // spec, wait at least 5ms before sending new command
-    }
-
-    return ESP_OK;
-}
-
-typedef struct {
-    uint8_t cmd;
-    uint8_t data[16];
-    uint8_t data_bytes; // Length of data in above data array; 0xFF = end of cmds.
-} lcd_init_cmd_t;
-
-static const lcd_init_cmd_t vendor_specific_init[] = {
-    // Enable Inter Register
-    {0xfe, {0}, 0},
-    {0xef, {0}, 0},
-    {0xeb, {0x14}, 1},
-    {0x84, {0x60}, 1},
-    {0x85, {0xff}, 1},
-    {0x86, {0xff}, 1},
-    {0x87, {0xff}, 1},
-    {0x8e, {0xff}, 1},
-    {0x8f, {0xff}, 1},
-    {0x88, {0x0a}, 1},
-    {0x89, {0x23}, 1},
-    {0x8a, {0x00}, 1},
-    {0x8b, {0x80}, 1},
-    {0x8c, {0x01}, 1},
-    {0x8d, {0x03}, 1},
-    {0x90, {0x08, 0x08, 0x08, 0x08}, 4},
-    {0xff, {0x60, 0x01, 0x04}, 3},
-    {0xC3, {0x13}, 1},
-    {0xC4, {0x13}, 1},
-    {0xC9, {0x30}, 1},
-    {0xbe, {0x11}, 1},
-    {0xe1, {0x10, 0x0e}, 2},
-    {0xdf, {0x21, 0x0c, 0x02}, 3},
-    // Set gamma
-    {0xF0, {0x45, 0x09, 0x08, 0x08, 0x26, 0x2a}, 6},
-    {0xF1, {0x43, 0x70, 0x72, 0x36, 0x37, 0x6f}, 6},
-    {0xF2, {0x45, 0x09, 0x08, 0x08, 0x26, 0x2a}, 6},
-    {0xF3, {0x43, 0x70, 0x72, 0x36, 0x37, 0x6f}, 6},
-    {0xed, {0x1b, 0x0b}, 2},
-    {0xae, {0x77}, 1},
-    {0xcd, {0x63}, 1},
-    {0x70, {0x07, 0x07, 0x04, 0x0e, 0x0f, 0x09, 0x07, 0x08, 0x03}, 9},
-    {0xE8, {0x34}, 1}, // 4 dot inversion
-    {0x60, {0x38, 0x0b, 0x6D, 0x6D, 0x39, 0xf0, 0x6D, 0x6D}, 8},
-    {0x61, {0x38, 0xf4, 0x6D, 0x6D, 0x38, 0xf7, 0x6D, 0x6D}, 8},
-    {0x62, {0x38, 0x0D, 0x71, 0xED, 0x70, 0x70, 0x38, 0x0F, 0x71, 0xEF, 0x70, 0x70}, 12},
-    {0x63, {0x38, 0x11, 0x71, 0xF1, 0x70, 0x70, 0x38, 0x13, 0x71, 0xF3, 0x70, 0x70}, 12},
-    {0x64, {0x28, 0x29, 0xF1, 0x01, 0xF1, 0x00, 0x07}, 7},
-    {0x66, {0x3C, 0x00, 0xCD, 0x67, 0x45, 0x45, 0x10, 0x00, 0x00, 0x00}, 10},
-    {0x67, {0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, 0x54, 0x10, 0x32, 0x98}, 10},
-    {0x74, {0x10, 0x45, 0x80, 0x00, 0x00, 0x4E, 0x00}, 7},
-    {0x98, {0x3e, 0x07}, 2},
-    {0x99, {0x3e, 0x07}, 2},
-    {0, {0}, 0xff},
-};
-
-static esp_err_t panel_gc9a01_init(esp_lcd_panel_t *panel)
-{
-    gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
-    esp_lcd_panel_io_handle_t io = gc9a01->io;
-
-    // LCD goes into sleep mode and display will be turned off after power on reset, exit sleep mode first
-    esp_lcd_panel_io_tx_param(io, LCD_CMD_SLPOUT, NULL, 0);
-    vTaskDelay(pdMS_TO_TICKS(100));
-    esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]) {
-        gc9a01->madctl_val,
-    }, 1);
-    esp_lcd_panel_io_tx_param(io, LCD_CMD_COLMOD, (uint8_t[]) {
-        gc9a01->colmod_cal,
-    }, 1);
-
-    // vendor specific initialization, it can be different between manufacturers
-    // should consult the LCD supplier for initialization sequence code
-    int cmd = 0;
-    while (vendor_specific_init[cmd].data_bytes != 0xff) {
-        esp_lcd_panel_io_tx_param(io, vendor_specific_init[cmd].cmd, vendor_specific_init[cmd].data, vendor_specific_init[cmd].data_bytes & 0x1F);
-        cmd++;
-    }
-
-    return ESP_OK;
-}
-
-static esp_err_t panel_gc9a01_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data)
-{
-    gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
-    assert((x_start < x_end) && (y_start < y_end) && "start position must be smaller than end position");
-    esp_lcd_panel_io_handle_t io = gc9a01->io;
-
-    x_start += gc9a01->x_gap;
-    x_end += gc9a01->x_gap;
-    y_start += gc9a01->y_gap;
-    y_end += gc9a01->y_gap;
-
-    // define an area of frame memory where MCU can access
-    esp_lcd_panel_io_tx_param(io, LCD_CMD_CASET, (uint8_t[]) {
-        (x_start >> 8) & 0xFF,
-        x_start & 0xFF,
-        ((x_end - 1) >> 8) & 0xFF,
-        (x_end - 1) & 0xFF,
-    }, 4);
-    esp_lcd_panel_io_tx_param(io, LCD_CMD_RASET, (uint8_t[]) {
-        (y_start >> 8) & 0xFF,
-        y_start & 0xFF,
-        ((y_end - 1) >> 8) & 0xFF,
-        (y_end - 1) & 0xFF,
-    }, 4);
-    // transfer frame buffer
-    size_t len = (x_end - x_start) * (y_end - y_start) * gc9a01->bits_per_pixel / 8;
-    esp_lcd_panel_io_tx_color(io, LCD_CMD_RAMWR, color_data, len);
-
-    return ESP_OK;
-}
-
-static esp_err_t panel_gc9a01_invert_color(esp_lcd_panel_t *panel, bool invert_color_data)
-{
-    gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
-    esp_lcd_panel_io_handle_t io = gc9a01->io;
-    int command = 0;
-    if (invert_color_data) {
-        command = LCD_CMD_INVON;
-    } else {
-        command = LCD_CMD_INVOFF;
-    }
-    esp_lcd_panel_io_tx_param(io, command, NULL, 0);
-    return ESP_OK;
-}
-
-static esp_err_t panel_gc9a01_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y)
-{
-    gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
-    esp_lcd_panel_io_handle_t io = gc9a01->io;
-    if (mirror_x) {
-        gc9a01->madctl_val |= LCD_CMD_MX_BIT;
-    } else {
-        gc9a01->madctl_val &= ~LCD_CMD_MX_BIT;
-    }
-    if (mirror_y) {
-        gc9a01->madctl_val |= LCD_CMD_MY_BIT;
-    } else {
-        gc9a01->madctl_val &= ~LCD_CMD_MY_BIT;
-    }
-    esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]) {
-        gc9a01->madctl_val
-    }, 1);
-    return ESP_OK;
-}
-
-static esp_err_t panel_gc9a01_swap_xy(esp_lcd_panel_t *panel, bool swap_axes)
-{
-    gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
-    esp_lcd_panel_io_handle_t io = gc9a01->io;
-    if (swap_axes) {
-        gc9a01->madctl_val |= LCD_CMD_MV_BIT;
-    } else {
-        gc9a01->madctl_val &= ~LCD_CMD_MV_BIT;
-    }
-    esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]) {
-        gc9a01->madctl_val
-    }, 1);
-    return ESP_OK;
-}
-
-static esp_err_t panel_gc9a01_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap)
-{
-    gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
-    gc9a01->x_gap = x_gap;
-    gc9a01->y_gap = y_gap;
-    return ESP_OK;
-}
-
-static esp_err_t panel_gc9a01_disp_on_off(esp_lcd_panel_t *panel, bool on_off)
-{
-    gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
-    esp_lcd_panel_io_handle_t io = gc9a01->io;
-    int command = 0;
-    if (on_off) {
-        command = LCD_CMD_DISPON;
-    } else {
-        command = LCD_CMD_DISPOFF;
-    }
-    esp_lcd_panel_io_tx_param(io, command, NULL, 0);
-    return ESP_OK;
-}
diff --git a/examples/peripherals/lcd/gc9a01/main/esp_lcd_panel_gc9a01.h b/examples/peripherals/lcd/gc9a01/main/esp_lcd_panel_gc9a01.h
deleted file mode 100644
index 3d0c5a0e7d..0000000000
--- a/examples/peripherals/lcd/gc9a01/main/esp_lcd_panel_gc9a01.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-#pragma once
-
-#include "esp_lcd_panel_vendor.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @brief Create LCD panel for model GC9A01
- *
- * @param[in] io LCD panel IO handle
- * @param[in] panel_dev_config general panel device configuration
- * @param[out] ret_panel Returned LCD panel handle
- * @return
- *          - ESP_ERR_INVALID_ARG   if parameter is invalid
- *          - ESP_ERR_NO_MEM        if out of memory
- *          - ESP_OK                on success
- */
-esp_err_t esp_lcd_new_panel_gc9a01(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel);
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/examples/peripherals/lcd/gc9a01/main/idf_component.yml b/examples/peripherals/lcd/gc9a01/main/idf_component.yml
deleted file mode 100644
index 84e851db81..0000000000
--- a/examples/peripherals/lcd/gc9a01/main/idf_component.yml
+++ /dev/null
@@ -1,3 +0,0 @@
-dependencies:
-  idf: ">=4.4"
-  lvgl/lvgl: "~8.2.0"
diff --git a/examples/peripherals/lcd/i2c_oled/main/i2c_oled_example_main.c b/examples/peripherals/lcd/i2c_oled/main/i2c_oled_example_main.c
index d3bae5e43c..638652e51c 100644
--- a/examples/peripherals/lcd/i2c_oled/main/i2c_oled_example_main.c
+++ b/examples/peripherals/lcd/i2c_oled/main/i2c_oled_example_main.c
@@ -38,7 +38,7 @@ static const char *TAG = "example";
 
 #define EXAMPLE_LVGL_TICK_PERIOD_MS    2
 
-extern void example_lvgl_demo_ui(lv_obj_t *scr);
+extern void example_lvgl_demo_ui(lv_disp_t *disp);
 
 static bool example_notify_lvgl_flush_ready(esp_lcd_panel_io_handle_t panel_io, esp_lcd_panel_io_event_data_t *edata, void *user_ctx)
 {
@@ -159,8 +159,7 @@ void app_main(void)
     ESP_ERROR_CHECK(esp_timer_start_periodic(lvgl_tick_timer, EXAMPLE_LVGL_TICK_PERIOD_MS * 1000));
 
     ESP_LOGI(TAG, "Display LVGL Scroll Text");
-    lv_obj_t *scr = lv_disp_get_scr_act(disp);
-    example_lvgl_demo_ui(scr);
+    example_lvgl_demo_ui(disp);
 
     while (1) {
         // raise the task priority of LVGL and/or reduce the handler period can improve the performance
diff --git a/examples/peripherals/lcd/i2c_oled/main/lvgl_demo_ui.c b/examples/peripherals/lcd/i2c_oled/main/lvgl_demo_ui.c
index a8d0ee9d6a..28d9801515 100644
--- a/examples/peripherals/lcd/i2c_oled/main/lvgl_demo_ui.c
+++ b/examples/peripherals/lcd/i2c_oled/main/lvgl_demo_ui.c
@@ -6,8 +6,9 @@
 
 #include "lvgl.h"
 
-void example_lvgl_demo_ui(lv_obj_t *scr)
+void example_lvgl_demo_ui(lv_disp_t *disp)
 {
+    lv_obj_t *scr = lv_disp_get_scr_act(disp);
     lv_obj_t *label = lv_label_create(scr);
     lv_label_set_long_mode(label, LV_LABEL_LONG_SCROLL_CIRCULAR); /* Circular scroll */
     lv_label_set_text(label, "Hello Espressif, Hello LVGL.");
diff --git a/examples/peripherals/lcd/i80_controller/main/i80_controller_example_main.c b/examples/peripherals/lcd/i80_controller/main/i80_controller_example_main.c
index e3e1c156e2..26f4168852 100644
--- a/examples/peripherals/lcd/i80_controller/main/i80_controller_example_main.c
+++ b/examples/peripherals/lcd/i80_controller/main/i80_controller_example_main.c
@@ -74,7 +74,7 @@ static const char *TAG = "example";
 // Supported alignment: 16, 32, 64. A higher alignment can enables higher burst transfer size, thus a higher i80 bus throughput.
 #define EXAMPLE_PSRAM_DATA_ALIGNMENT   64
 
-extern void example_lvgl_demo_ui(lv_obj_t *scr);
+extern void example_lvgl_demo_ui(lv_disp_t *disp);
 
 static bool example_notify_lvgl_flush_ready(esp_lcd_panel_io_handle_t panel_io, esp_lcd_panel_io_event_data_t *edata, void *user_ctx)
 {
@@ -268,8 +268,7 @@ void app_main(void)
     ESP_ERROR_CHECK(esp_timer_start_periodic(lvgl_tick_timer, EXAMPLE_LVGL_TICK_PERIOD_MS * 1000));
 
     ESP_LOGI(TAG, "Display LVGL animation");
-    lv_obj_t *scr = lv_disp_get_scr_act(disp);
-    example_lvgl_demo_ui(scr);
+    example_lvgl_demo_ui(disp);
 
     while (1) {
         // raise the task priority of LVGL and/or reduce the handler period can improve the performance
diff --git a/examples/peripherals/lcd/i80_controller/main/lvgl_demo_ui.c b/examples/peripherals/lcd/i80_controller/main/lvgl_demo_ui.c
index cd4731e6a4..d3d8b4d8e4 100644
--- a/examples/peripherals/lcd/i80_controller/main/lvgl_demo_ui.c
+++ b/examples/peripherals/lcd/i80_controller/main/lvgl_demo_ui.c
@@ -74,8 +74,10 @@ static void anim_timer_cb(lv_timer_t *timer)
     }
 }
 
-void example_lvgl_demo_ui(lv_obj_t *scr)
+void example_lvgl_demo_ui(lv_disp_t *disp)
 {
+    lv_obj_t *scr = lv_disp_get_scr_act(disp);
+
     // Create image
     img_logo = lv_img_create(scr);
     lv_img_set_src(img_logo, &esp_logo);
diff --git a/examples/peripherals/lcd/rgb_panel/main/lvgl_demo_ui.c b/examples/peripherals/lcd/rgb_panel/main/lvgl_demo_ui.c
index 3db1b24ea9..2ed988ceb3 100644
--- a/examples/peripherals/lcd/rgb_panel/main/lvgl_demo_ui.c
+++ b/examples/peripherals/lcd/rgb_panel/main/lvgl_demo_ui.c
@@ -39,8 +39,9 @@ static void add_data(lv_timer_t *timer)
     lv_chart_set_next_value2(chart, lv_chart_get_series_next(chart, NULL), lv_rand(0, 200), lv_rand(0, 1000));
 }
 
-void example_lvgl_demo_ui(lv_obj_t *scr)
+void example_lvgl_demo_ui(lv_disp_t *disp)
 {
+    lv_obj_t *scr = lv_disp_get_scr_act(disp);
     lv_obj_t *chart = lv_chart_create(scr);
     lv_obj_set_size(chart, 200, 150);
     lv_obj_align(chart, LV_ALIGN_CENTER, 0, 0);
diff --git a/examples/peripherals/lcd/rgb_panel/main/rgb_lcd_example_main.c b/examples/peripherals/lcd/rgb_panel/main/rgb_lcd_example_main.c
index 436cf29310..0b0fe81f36 100644
--- a/examples/peripherals/lcd/rgb_panel/main/rgb_lcd_example_main.c
+++ b/examples/peripherals/lcd/rgb_panel/main/rgb_lcd_example_main.c
@@ -60,7 +60,7 @@ SemaphoreHandle_t sem_vsync_end;
 SemaphoreHandle_t sem_gui_ready;
 #endif
 
-extern void example_lvgl_demo_ui(lv_obj_t *scr);
+extern void example_lvgl_demo_ui(lv_disp_t *disp);
 
 static bool example_on_vsync_event(esp_lcd_panel_handle_t panel, const esp_lcd_rgb_panel_event_data_t *event_data, void *user_data)
 {
@@ -226,8 +226,7 @@ void app_main(void)
     ESP_ERROR_CHECK(esp_timer_start_periodic(lvgl_tick_timer, EXAMPLE_LVGL_TICK_PERIOD_MS * 1000));
 
     ESP_LOGI(TAG, "Display LVGL Scatter Chart");
-    lv_obj_t *scr = lv_disp_get_scr_act(disp);
-    example_lvgl_demo_ui(scr);
+    example_lvgl_demo_ui(disp);
 
     while (1) {
         // raise the task priority of LVGL and/or reduce the handler period can improve the performance
diff --git a/examples/peripherals/lcd/gc9a01/CMakeLists.txt b/examples/peripherals/lcd/spi_lcd_touch/CMakeLists.txt
similarity index 79%
rename from examples/peripherals/lcd/gc9a01/CMakeLists.txt
rename to examples/peripherals/lcd/spi_lcd_touch/CMakeLists.txt
index 0189b462ae..ec78aa1cc8 100644
--- a/examples/peripherals/lcd/gc9a01/CMakeLists.txt
+++ b/examples/peripherals/lcd/spi_lcd_touch/CMakeLists.txt
@@ -1,4 +1,4 @@
 cmake_minimum_required(VERSION 3.16)
 
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
-project(lcd_gc9a01)
+project(spi_lcd_touch)
diff --git a/examples/peripherals/lcd/gc9a01/README.md b/examples/peripherals/lcd/spi_lcd_touch/README.md
similarity index 62%
rename from examples/peripherals/lcd/gc9a01/README.md
rename to examples/peripherals/lcd/spi_lcd_touch/README.md
index 65e5836bfd..7a3c1710b4 100644
--- a/examples/peripherals/lcd/gc9a01/README.md
+++ b/examples/peripherals/lcd/spi_lcd_touch/README.md
@@ -1,20 +1,24 @@
 | Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-S2 | ESP32-S3 |
 | ----------------- | ----- | -------- | -------- | -------- | -------- |
 
-# GC9A01 porting example
+# SPI LCD and Touch Panel Example
 
 [esp_lcd](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/lcd.html) provides several panel drivers out-of box, e.g. ST7789, SSD1306, NT35510. However, there're a lot of other panels on the market, it's beyond `esp_lcd` component's responsibility to include them all.
 
 `esp_lcd` allows user to add their own panel drivers in the project scope (i.e. panel driver can live outside of esp-idf), so that the upper layer code like LVGL porting code can be reused without any modifications, as long as user-implemented panel driver follows the interface defined in the `esp_lcd` component.
 
-This example shows how to add the GC9A01 driver in the project folder but still use the API provided by `esp_lcd` component. As GC9A01 is famous in the form of a circular screen, this example will draw a fancy dash board with the LVGL library. For more information about porting the LVGL library, you can also refer to [another lvgl porting example](../i80_controller/README.md).
+This example shows how to use GC9A01 or ILI9341 display driver from Component manager in esp-idf project. These components are using API provided by `esp_lcd` component. This example will draw a fancy dash board with the LVGL library. For more information about porting the LVGL library, you can also refer to [another lvgl porting example](../i80_controller/README.md).
+
+## Touch controller STMPE610
+
+In this example you can enable touch controller STMPE610 connected via SPI. The SPI connection is shared with LCD screen.
 
 ## How to use the example
 
 ### Hardware Required
 
 * An ESP development board
-* An GC9A01 LCD panel, with SPI interface
+* An GC9A01 or ILI9341 LCD panel, with SPI interface (with/without STMPE610 SPI touch)
 * An USB cable for power supply and programming
 
 ### Hardware Connection
@@ -22,7 +26,7 @@ This example shows how to add the GC9A01 driver in the project folder but still
 The connection between ESP Board and the LCD is as follows:
 
 ```
-       ESP Board                           GC9A01 Panel
+       ESP Board                       GC9A01/ILI9341 Panel + TOUCH
 ┌──────────────────────┐              ┌────────────────────┐
 │             GND      ├─────────────►│ GND                │
 │                      │              │                    │
@@ -30,20 +34,24 @@ The connection between ESP Board and the LCD is as follows:
 │                      │              │                    │
 │             PCLK     ├─────────────►│ SCL                │
 │                      │              │                    │
-│             DATA0    ├─────────────►│ SDA                │
+│             MOSI     ├─────────────►│ MOSI               │
+│                      │              │                    │
+│             MISO     |◄─────────────┤ MISO               │
 │                      │              │                    │
 │             RST      ├─────────────►│ RES                │
 │                      │              │                    │
 │             DC       ├─────────────►│ DC                 │
 │                      │              │                    │
-│             CS       ├─────────────►│ CS                 │
+│             LCD CS   ├─────────────►│ LCD CS             │
+│                      │              │                    │
+│             TOUCH CS ├─────────────►│ TOUCH CS           │
 │                      │              │                    │
 │             BK_LIGHT ├─────────────►│ BLK                │
 └──────────────────────┘              └────────────────────┘
 ```
 
-The GPIO number used by this example can be changed in [lvgl_example_main.c](main/gc9a01_example_main.c).
-Especially, please pay attention to the level used to turn on the LCD backlight, some LCD module needs a low level to turn it on, while others take a high level. You can change the backlight level macro `EXAMPLE_LCD_BK_LIGHT_ON_LEVEL` in [lvgl_example_main.c](main/gc9a01_example_main.c).
+The GPIO number used by this example can be changed in [lvgl_example_main.c](main/spi_lcd_touch_example_main.c).
+Especially, please pay attention to the level used to turn on the LCD backlight, some LCD module needs a low level to turn it on, while others take a high level. You can change the backlight level macro `EXAMPLE_LCD_BK_LIGHT_ON_LEVEL` in [lvgl_example_main.c](main/spi_lcd_touch_example_main.c).
 
 ### Build and Flash
 
@@ -59,19 +67,23 @@ See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/l
 
 ```bash
 ...
-I (304) cpu_start: Starting scheduler.
-I (308) example: Turn off LCD backlight
-I (308) gpio: GPIO[2]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
-I (318) example: Initialize SPI bus
-I (318) example: Install panel IO
-I (328) gpio: GPIO[5]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
-I (338) example: Install GC9A01 panel driver
-I (338) gpio: GPIO[3]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
-I (468) example: Turn on LCD backlight
-I (468) example: Initialize LVGL library
-I (468) example: Register display driver to LVGL
-I (468) example: Install LVGL tick timer
-I (468) example: Display LVGL Meter Widget
+I (409) cpu_start: Starting scheduler on APP CPU.
+I (419) example: Turn off LCD backlight
+I (419) gpio: GPIO[2]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
+I (429) example: Initialize SPI bus
+I (439) example: Install panel IO
+I (439) gpio: GPIO[5]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
+I (449) example: Install GC9A01 panel driver
+I (459) gpio: GPIO[3]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
+I (589) gpio: GPIO[0]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
+I (589) example: Initialize touch controller STMPE610
+I (589) STMPE610: TouchPad ID: 0x0811
+I (589) STMPE610: TouchPad Ver: 0x03
+I (599) example: Turn on LCD backlight
+I (599) example: Initialize LVGL library
+I (609) example: Register display driver to LVGL
+I (619) example: Install LVGL tick timer
+I (619) example: Display LVGL Meter Widget
 ...
 ```
 
@@ -80,7 +92,5 @@ I (468) example: Display LVGL Meter Widget
 
 * Why the LCD doesn't light up?
   * Check the backlight's turn-on level, and update it in `EXAMPLE_LCD_BK_LIGHT_ON_LEVEL`
-* Weird color display?
-  * Each LCD panel has it's own initialize code, see the `vendor_specific_init` array defined in [GC9A01 driver](main/esp_lcd_panel_gc9a01.c), where contains the Gama setting. You should consult your the LCD supplier.
 
-For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
\ No newline at end of file
+For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
diff --git a/examples/peripherals/lcd/spi_lcd_touch/main/CMakeLists.txt b/examples/peripherals/lcd/spi_lcd_touch/main/CMakeLists.txt
new file mode 100644
index 0000000000..2849837502
--- /dev/null
+++ b/examples/peripherals/lcd/spi_lcd_touch/main/CMakeLists.txt
@@ -0,0 +1,2 @@
+idf_component_register(SRCS "spi_lcd_touch_example_main.c" "lvgl_demo_ui.c"
+                       INCLUDE_DIRS ".")
diff --git a/examples/peripherals/lcd/spi_lcd_touch/main/Kconfig.projbuild b/examples/peripherals/lcd/spi_lcd_touch/main/Kconfig.projbuild
new file mode 100644
index 0000000000..683c6eb168
--- /dev/null
+++ b/examples/peripherals/lcd/spi_lcd_touch/main/Kconfig.projbuild
@@ -0,0 +1,35 @@
+menu "Example Configuration"
+
+    choice EXAMPLE_LCD_CONTROLLER
+        prompt "LCD controller model"
+        default EXAMPLE_LCD_CONTROLLER_ILI9341
+        help
+            Select LCD controller model
+
+        config EXAMPLE_LCD_CONTROLLER_ILI9341
+            bool "ILI9341"
+
+        config EXAMPLE_LCD_CONTROLLER_GC9A01
+            bool "GC9A01"
+    endchoice
+
+    config EXAMPLE_LCD_TOUCH_ENABLED
+        bool "Enable LCD touch"
+        default n
+        help
+            Enable this option if you wish to use display touch. You can select from touch controllers.
+
+    choice EXAMPLE_LCD_TOUCH_CONTROLLER
+        prompt "LCD touch controller model"
+        depends on EXAMPLE_LCD_TOUCH_ENABLED
+        default EXAMPLE_LCD_TOUCH_CONTROLLER_STMPE610
+        help
+            Select LCD touch controller model
+
+        config EXAMPLE_LCD_TOUCH_CONTROLLER_STMPE610
+            bool "STMPE610"
+            help
+                Touch controller STMPE610 connected via SPI.
+    endchoice
+
+endmenu
diff --git a/examples/peripherals/lcd/spi_lcd_touch/main/idf_component.yml b/examples/peripherals/lcd/spi_lcd_touch/main/idf_component.yml
new file mode 100644
index 0000000000..a1a4039923
--- /dev/null
+++ b/examples/peripherals/lcd/spi_lcd_touch/main/idf_component.yml
@@ -0,0 +1,6 @@
+dependencies:
+  idf: ">=4.4"
+  lvgl/lvgl: "~8.3.0"
+  esp_lcd_ili9341: "^1.0"
+  esp_lcd_gc9a01: "^1.0"
+  esp_lcd_touch_stmpe610: "^1.0"
diff --git a/examples/peripherals/lcd/gc9a01/main/lvgl_demo_ui.c b/examples/peripherals/lcd/spi_lcd_touch/main/lvgl_demo_ui.c
similarity index 78%
rename from examples/peripherals/lcd/gc9a01/main/lvgl_demo_ui.c
rename to examples/peripherals/lcd/spi_lcd_touch/main/lvgl_demo_ui.c
index 4c6321b5d5..591dd95eed 100644
--- a/examples/peripherals/lcd/gc9a01/main/lvgl_demo_ui.c
+++ b/examples/peripherals/lcd/spi_lcd_touch/main/lvgl_demo_ui.c
@@ -9,14 +9,27 @@
 #include "lvgl.h"
 
 static lv_obj_t *meter;
+static lv_obj_t * btn;
+static lv_disp_rot_t rotation = LV_DISP_ROT_NONE;
 
 static void set_value(void *indic, int32_t v)
 {
     lv_meter_set_indicator_end_value(meter, indic, v);
 }
 
-void example_lvgl_demo_ui(lv_obj_t *scr)
+static void btn_cb(lv_event_t * e)
 {
+    lv_disp_t *disp = lv_event_get_user_data(e);
+    rotation++;
+    if (rotation > LV_DISP_ROT_270) {
+        rotation = LV_DISP_ROT_NONE;
+    }
+    lv_disp_set_rotation(disp, rotation);
+}
+
+void example_lvgl_demo_ui(lv_disp_t *disp)
+{
+    lv_obj_t *scr = lv_disp_get_scr_act(disp);
     meter = lv_meter_create(scr);
     lv_obj_center(meter);
     lv_obj_set_size(meter, 200, 200);
@@ -51,6 +64,13 @@ void example_lvgl_demo_ui(lv_obj_t *scr)
     /*Add a needle line indicator*/
     indic = lv_meter_add_needle_line(meter, scale, 4, lv_palette_main(LV_PALETTE_GREY), -10);
 
+    btn = lv_btn_create(scr);
+    lv_obj_t * lbl = lv_label_create(btn);
+    lv_label_set_text_static(lbl, LV_SYMBOL_REFRESH" ROTATE");
+    lv_obj_align(btn, LV_ALIGN_BOTTOM_LEFT, 30, -30);
+    /*Button event*/
+    lv_obj_add_event_cb(btn, btn_cb, LV_EVENT_CLICKED, disp);
+
     /*Create an animation to set the value*/
     lv_anim_t a;
     lv_anim_init(&a);
diff --git a/examples/peripherals/lcd/gc9a01/main/gc9a01_example_main.c b/examples/peripherals/lcd/spi_lcd_touch/main/spi_lcd_touch_example_main.c
similarity index 54%
rename from examples/peripherals/lcd/gc9a01/main/gc9a01_example_main.c
rename to examples/peripherals/lcd/spi_lcd_touch/main/spi_lcd_touch_example_main.c
index c3e181142f..4b3e51939d 100644
--- a/examples/peripherals/lcd/gc9a01/main/gc9a01_example_main.c
+++ b/examples/peripherals/lcd/spi_lcd_touch/main/spi_lcd_touch_example_main.c
@@ -16,7 +16,16 @@
 #include "esp_err.h"
 #include "esp_log.h"
 #include "lvgl.h"
-#include "esp_lcd_panel_gc9a01.h"
+
+#if CONFIG_EXAMPLE_LCD_CONTROLLER_ILI9341
+#include "esp_lcd_ili9341.h"
+#elif CONFIG_EXAMPLE_LCD_CONTROLLER_GC9A01
+#include "esp_lcd_gc9a01.h"
+#endif
+
+#if CONFIG_EXAMPLE_LCD_TOUCH_CONTROLLER_STMPE610
+#include "esp_lcd_touch_stmpe610.h"
+#endif
 
 static const char *TAG = "example";
 
@@ -29,23 +38,35 @@ static const char *TAG = "example";
 #define EXAMPLE_LCD_PIXEL_CLOCK_HZ     (20 * 1000 * 1000)
 #define EXAMPLE_LCD_BK_LIGHT_ON_LEVEL  1
 #define EXAMPLE_LCD_BK_LIGHT_OFF_LEVEL !EXAMPLE_LCD_BK_LIGHT_ON_LEVEL
-#define EXAMPLE_PIN_NUM_DATA0          19
-#define EXAMPLE_PIN_NUM_PCLK           18
-#define EXAMPLE_PIN_NUM_CS             4
-#define EXAMPLE_PIN_NUM_DC             5
-#define EXAMPLE_PIN_NUM_RST            3
+#define EXAMPLE_PIN_NUM_SCLK           18
+#define EXAMPLE_PIN_NUM_MOSI           19
+#define EXAMPLE_PIN_NUM_MISO           21
+#define EXAMPLE_PIN_NUM_LCD_DC         5
+#define EXAMPLE_PIN_NUM_LCD_RST        3
+#define EXAMPLE_PIN_NUM_LCD_CS         4
 #define EXAMPLE_PIN_NUM_BK_LIGHT       2
+#define EXAMPLE_PIN_NUM_TOUCH_CS       15
 
 // The pixel number in horizontal and vertical
+#if CONFIG_EXAMPLE_LCD_CONTROLLER_ILI9341
+#define EXAMPLE_LCD_H_RES              240
+#define EXAMPLE_LCD_V_RES              320
+#elif CONFIG_EXAMPLE_LCD_CONTROLLER_GC9A01
 #define EXAMPLE_LCD_H_RES              240
 #define EXAMPLE_LCD_V_RES              240
+#endif
 // Bit number used to represent command and parameter
 #define EXAMPLE_LCD_CMD_BITS           8
 #define EXAMPLE_LCD_PARAM_BITS         8
 
 #define EXAMPLE_LVGL_TICK_PERIOD_MS    2
 
-extern void example_lvgl_demo_ui(lv_obj_t *scr);
+
+#if CONFIG_EXAMPLE_LCD_TOUCH_ENABLED
+esp_lcd_touch_handle_t tp = NULL;
+#endif
+
+extern void example_lvgl_demo_ui(lv_disp_t *disp);
 
 static bool example_notify_lvgl_flush_ready(esp_lcd_panel_io_handle_t panel_io, esp_lcd_panel_io_event_data_t *edata, void *user_ctx)
 {
@@ -65,6 +86,78 @@ static void example_lvgl_flush_cb(lv_disp_drv_t *drv, const lv_area_t *area, lv_
     esp_lcd_panel_draw_bitmap(panel_handle, offsetx1, offsety1, offsetx2 + 1, offsety2 + 1, color_map);
 }
 
+/* Rotate display and touch, when rotated screen in LVGL. Called when driver parameters are updated. */
+static void example_lvgl_port_update_callback(lv_disp_drv_t *drv)
+{
+    esp_lcd_panel_handle_t panel_handle = (esp_lcd_panel_handle_t) drv->user_data;
+
+    switch (drv->rotated) {
+    case LV_DISP_ROT_NONE:
+        // Rotate LCD display
+        esp_lcd_panel_swap_xy(panel_handle, false);
+        esp_lcd_panel_mirror(panel_handle, true, false);
+#if CONFIG_EXAMPLE_LCD_TOUCH_ENABLED
+        // Rotate LCD touch
+        esp_lcd_touch_set_mirror_y(tp, false);
+        esp_lcd_touch_set_mirror_x(tp, false);
+#endif
+        break;
+    case LV_DISP_ROT_90:
+        // Rotate LCD display
+        esp_lcd_panel_swap_xy(panel_handle, true);
+        esp_lcd_panel_mirror(panel_handle, true, true);
+#if CONFIG_EXAMPLE_LCD_TOUCH_ENABLED
+        // Rotate LCD touch
+        esp_lcd_touch_set_mirror_y(tp, false);
+        esp_lcd_touch_set_mirror_x(tp, false);
+#endif
+        break;
+    case LV_DISP_ROT_180:
+        // Rotate LCD display
+        esp_lcd_panel_swap_xy(panel_handle, false);
+        esp_lcd_panel_mirror(panel_handle, false, true);
+#if CONFIG_EXAMPLE_LCD_TOUCH_ENABLED
+        // Rotate LCD touch
+        esp_lcd_touch_set_mirror_y(tp, false);
+        esp_lcd_touch_set_mirror_x(tp, false);
+#endif
+        break;
+    case LV_DISP_ROT_270:
+        // Rotate LCD display
+        esp_lcd_panel_swap_xy(panel_handle, true);
+        esp_lcd_panel_mirror(panel_handle, false, false);
+#if CONFIG_EXAMPLE_LCD_TOUCH_ENABLED
+        // Rotate LCD touch
+        esp_lcd_touch_set_mirror_y(tp, false);
+        esp_lcd_touch_set_mirror_x(tp, false);
+#endif
+        break;
+    }
+}
+
+#if CONFIG_EXAMPLE_LCD_TOUCH_ENABLED
+static void example_lvgl_touch_cb(lv_indev_drv_t * drv, lv_indev_data_t * data)
+{
+    uint16_t touchpad_x[1] = {0};
+    uint16_t touchpad_y[1] = {0};
+    uint8_t touchpad_cnt = 0;
+
+    /* Read touch controller data */
+    esp_lcd_touch_read_data(drv->user_data);
+
+    /* Get coordinates */
+    bool touchpad_pressed = esp_lcd_touch_get_coordinates(drv->user_data, touchpad_x, touchpad_y, NULL, &touchpad_cnt, 1);
+
+    if (touchpad_pressed && touchpad_cnt > 0) {
+        data->point.x = touchpad_x[0];
+        data->point.y = touchpad_y[0];
+        data->state = LV_INDEV_STATE_PRESSED;
+    } else {
+        data->state = LV_INDEV_STATE_RELEASED;
+    }
+}
+#endif
+
 static void example_increase_lvgl_tick(void *arg)
 {
     /* Tell LVGL how many milliseconds has elapsed */
@@ -85,9 +178,9 @@ void app_main(void)
 
     ESP_LOGI(TAG, "Initialize SPI bus");
     spi_bus_config_t buscfg = {
-        .sclk_io_num = EXAMPLE_PIN_NUM_PCLK,
-        .mosi_io_num = EXAMPLE_PIN_NUM_DATA0,
-        .miso_io_num = -1,
+        .sclk_io_num = EXAMPLE_PIN_NUM_SCLK,
+        .mosi_io_num = EXAMPLE_PIN_NUM_MOSI,
+        .miso_io_num = EXAMPLE_PIN_NUM_MISO,
         .quadwp_io_num = -1,
         .quadhd_io_num = -1,
         .max_transfer_sz = EXAMPLE_LCD_H_RES * 80 * sizeof(uint16_t),
@@ -97,8 +190,8 @@ void app_main(void)
     ESP_LOGI(TAG, "Install panel IO");
     esp_lcd_panel_io_handle_t io_handle = NULL;
     esp_lcd_panel_io_spi_config_t io_config = {
-        .dc_gpio_num = EXAMPLE_PIN_NUM_DC,
-        .cs_gpio_num = EXAMPLE_PIN_NUM_CS,
+        .dc_gpio_num = EXAMPLE_PIN_NUM_LCD_DC,
+        .cs_gpio_num = EXAMPLE_PIN_NUM_LCD_CS,
         .pclk_hz = EXAMPLE_LCD_PIXEL_CLOCK_HZ,
         .lcd_cmd_bits = EXAMPLE_LCD_CMD_BITS,
         .lcd_param_bits = EXAMPLE_LCD_PARAM_BITS,
@@ -113,20 +206,54 @@ void app_main(void)
     ESP_LOGI(TAG, "Install GC9A01 panel driver");
     esp_lcd_panel_handle_t panel_handle = NULL;
     esp_lcd_panel_dev_config_t panel_config = {
-        .reset_gpio_num = EXAMPLE_PIN_NUM_RST,
+        .reset_gpio_num = EXAMPLE_PIN_NUM_LCD_RST,
+#if CONFIG_EXAMPLE_LCD_CONTROLLER_ILI9341
+        .color_space = ESP_LCD_COLOR_SPACE_RGB,
+#elif CONFIG_EXAMPLE_LCD_CONTROLLER_GC9A01
         .color_space = ESP_LCD_COLOR_SPACE_BGR,
+#endif
         .bits_per_pixel = 16,
     };
+#if CONFIG_EXAMPLE_LCD_CONTROLLER_ILI9341
+    ESP_ERROR_CHECK(esp_lcd_new_panel_ili9341(io_handle, &panel_config, &panel_handle));
+#elif CONFIG_EXAMPLE_LCD_CONTROLLER_GC9A01
     ESP_ERROR_CHECK(esp_lcd_new_panel_gc9a01(io_handle, &panel_config, &panel_handle));
+#endif
 
     ESP_ERROR_CHECK(esp_lcd_panel_reset(panel_handle));
     ESP_ERROR_CHECK(esp_lcd_panel_init(panel_handle));
+#if CONFIG_EXAMPLE_LCD_CONTROLLER_GC9A01
     ESP_ERROR_CHECK(esp_lcd_panel_invert_color(panel_handle, true));
+#endif
     ESP_ERROR_CHECK(esp_lcd_panel_mirror(panel_handle, true, false));
 
     // user can flush pre-defined pattern to the screen before we turn on the screen or backlight
     ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(panel_handle, true));
 
+#if CONFIG_EXAMPLE_LCD_TOUCH_ENABLED
+    esp_lcd_panel_io_handle_t tp_io_handle = NULL;
+    esp_lcd_panel_io_spi_config_t tp_io_config = ESP_LCD_TOUCH_IO_SPI_STMPE610_CONFIG(EXAMPLE_PIN_NUM_TOUCH_CS);
+    // Attach the TOUCH to the SPI bus
+    ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)LCD_HOST, &tp_io_config, &tp_io_handle));
+
+    esp_lcd_touch_config_t tp_cfg = {
+        .x_max = EXAMPLE_LCD_H_RES,
+        .y_max = EXAMPLE_LCD_V_RES,
+        .rst_gpio_num = -1,
+        .int_gpio_num = -1,
+        .flags = {
+            .swap_xy = 0,
+            .mirror_x = 0,
+            .mirror_y = 0,
+        },
+    };
+
+#if CONFIG_EXAMPLE_LCD_TOUCH_CONTROLLER_STMPE610
+    ESP_LOGI(TAG, "Initialize touch controller STMPE610");
+    ESP_ERROR_CHECK(esp_lcd_touch_new_spi_stmpe610(tp_io_handle, &tp_cfg, &tp));
+#endif // CONFIG_EXAMPLE_LCD_TOUCH_CONTROLLER_STMPE610
+#endif // CONFIG_EXAMPLE_LCD_TOUCH_ENABLED
+
     ESP_LOGI(TAG, "Turn on LCD backlight");
     gpio_set_level(EXAMPLE_PIN_NUM_BK_LIGHT, EXAMPLE_LCD_BK_LIGHT_ON_LEVEL);
 
@@ -146,6 +273,7 @@ void app_main(void)
     disp_drv.hor_res = EXAMPLE_LCD_H_RES;
     disp_drv.ver_res = EXAMPLE_LCD_V_RES;
     disp_drv.flush_cb = example_lvgl_flush_cb;
+    disp_drv.drv_update_cb = example_lvgl_port_update_callback;
     disp_drv.draw_buf = &disp_buf;
     disp_drv.user_data = panel_handle;
     lv_disp_t *disp = lv_disp_drv_register(&disp_drv);
@@ -160,9 +288,19 @@ void app_main(void)
     ESP_ERROR_CHECK(esp_timer_create(&lvgl_tick_timer_args, &lvgl_tick_timer));
     ESP_ERROR_CHECK(esp_timer_start_periodic(lvgl_tick_timer, EXAMPLE_LVGL_TICK_PERIOD_MS * 1000));
 
+#if CONFIG_EXAMPLE_LCD_TOUCH_ENABLED
+    static lv_indev_drv_t indev_drv;    // Input device driver (Touch)
+    lv_indev_drv_init(&indev_drv);
+    indev_drv.type = LV_INDEV_TYPE_POINTER;
+    indev_drv.disp = disp;
+    indev_drv.read_cb = example_lvgl_touch_cb;
+    indev_drv.user_data = tp;
+
+    lv_indev_drv_register(&indev_drv);
+#endif
+
     ESP_LOGI(TAG, "Display LVGL Meter Widget");
-    lv_obj_t *scr = lv_disp_get_scr_act(disp);
-    example_lvgl_demo_ui(scr);
+    example_lvgl_demo_ui(disp);
 
     while (1) {
         // raise the task priority of LVGL and/or reduce the handler period can improve the performance
diff --git a/examples/peripherals/lcd/gc9a01/sdkconfig.defaults b/examples/peripherals/lcd/spi_lcd_touch/sdkconfig.defaults
similarity index 100%
rename from examples/peripherals/lcd/gc9a01/sdkconfig.defaults
rename to examples/peripherals/lcd/spi_lcd_touch/sdkconfig.defaults