fix(phy): fix esp32 build fail issue

Closes https://github.com/espressif/esp-idf/issues/11972

components/esp_phy/CMakeLists.txt

@@ -57,19 +57,6 @@ if(link_binary_libs)
 
     idf_component_get_property(esp_phy_lib esp_phy COMPONENT_LIB)
 
-    if(CONFIG_IDF_TARGET_ESP32)
-        target_link_libraries(${COMPONENT_LIB} PUBLIC rtc)
-        target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a librtc.a
-        $<TARGET_FILE:${esp_phy_lib}>)
-    elseif(CONFIG_IDF_TARGET_ESP32S2)
-        target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a
-        $<TARGET_FILE:${esp_phy_lib}>)
-    elseif(CONFIG_SOC_BT_SUPPORTED OR CONFIG_SOC_IEEE802154_SUPPORTED)
-        target_link_libraries(${COMPONENT_LIB} PUBLIC btbb)
-        target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a libbtbb.a
-        $<TARGET_FILE:${esp_phy_lib}>)
-    endif()
-
     if(CONFIG_ESP_PHY_ENABLE_CERT_TEST)
         if(CONFIG_IDF_TARGET_ESP32)
             target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libbttestmode.a
@@ -82,6 +69,19 @@ if(link_binary_libs)
             librfate.a librftest.a $<TARGET_FILE:${esp_phy_lib}>)
         endif()
     endif()
+
+    if(CONFIG_IDF_TARGET_ESP32)
+        target_link_libraries(${COMPONENT_LIB} PUBLIC rtc)
+        target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a librtc.a
+        $<TARGET_FILE:${esp_phy_lib}>)
+    elseif(CONFIG_SOC_BT_SUPPORTED OR CONFIG_SOC_IEEE802154_SUPPORTED)
+        target_link_libraries(${COMPONENT_LIB} PUBLIC btbb)
+        target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a libbtbb.a
+        $<TARGET_FILE:${esp_phy_lib}>)
+    elseif(CONFIG_SOC_WIFI_SUPPORTED)
+        target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a
+        $<TARGET_FILE:${esp_phy_lib}>)
+    endif()
 endif()
 
 if(CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION)

components/esp_phy/include/esp_phy_cert_test.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -63,7 +63,7 @@ typedef struct {
     uint32_t phy_rx_correct_count; /*!< The number of desired packets received */
     int phy_rx_rssi;               /*!< Average RSSI of desired packets */
     uint32_t phy_rx_total_count;   /*!< The number of total packets received */
-    uint32_t phy_rx_result_flag;   /*!< 0 means no RX info; 1 means the lastest Wi-Fi RX info; 2 means the lastest BLE RX info. */
+    uint32_t phy_rx_result_flag;   /*!< 0 means no RX info; 1 means the latest Wi-Fi RX info; 2 means the latest BLE RX info. */
 } esp_phy_rx_result_t;
 
 /**
@@ -120,7 +120,7 @@ void esp_phy_cbw40m_en(bool en);
 void esp_phy_wifi_tx(uint32_t chan, esp_phy_wifi_rate_t rate, int8_t backoff, uint32_t length_byte, uint32_t packet_delay, uint32_t packet_num);
 
 /**
- * @brief Test start/stop command, used to stop transmitting or reciving state.
+ * @brief Test start/stop command, used to stop transmitting or receiving state.
  *
  * @param value:
  *     Value should be set to 3 before TX/RX.

examples/phy/.build-test-rules.yml

@@ -1,7 +1,3 @@
 # Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
 
 examples/phy/cert_test:
-  enable:
-    - if: IDF_TARGET in ["esp32", "esp32c2", "esp32c3", "esp32c6", "esp32h2", "esp32s2", "esp32s3"]
-      temporary: true
-      reason: the other targets are not tested yet

examples/phy/cert_test/sdkconfig.defaults

@@ -2,3 +2,4 @@ CONFIG_ESP_TASK_WDT_EN=n
 
 CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION=y
 CONFIG_ESP_PHY_ENABLE_CERT_TEST=y
+CONFIG_BT_ENABLED=y