diff --git a/components/bt/controller/esp32c5/bt.c b/components/bt/controller/esp32c5/bt.c
index 793abbf310..c0ed4fff55 100644
--- a/components/bt/controller/esp32c5/bt.c
+++ b/components/bt/controller/esp32c5/bt.c
@@ -40,12 +40,12 @@
 #include "esp_phy_init.h"
 #include "esp_private/periph_ctrl.h"
 #include "soc/retention_periph_defs.h"
-#include "esp_private/sleep_retention.h"
 #include "soc/regdma.h"
 #include "bt_osi_mem.h"
 
 #if CONFIG_FREERTOS_USE_TICKLESS_IDLE
 #include "esp_private/sleep_modem.h"
+#include "esp_private/sleep_retention.h"
 #endif // CONFIG_FREERTOS_USE_TICKLESS_IDLE
 
 #include "freertos/FreeRTOS.h"
@@ -128,8 +128,8 @@ extern void r_ble_rtc_wake_up_state_clr(void);
 extern int os_msys_init(void);
 extern void os_msys_deinit(void);
 #if CONFIG_FREERTOS_USE_TICKLESS_IDLE
-extern const sleep_retention_entries_config_t *esp_ble_mac_retention_link_get(uint8_t *size, uint8_t extra);
-extern void esp_ble_set_wakeup_overhead(uint32_t overhead);
+extern sleep_retention_entries_config_t *r_esp_ble_mac_retention_link_get(uint8_t *size, uint8_t extra);
+extern void r_esp_ble_set_wakeup_overhead(uint32_t overhead);
 #endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
 extern void r_esp_ble_change_rtc_freq(uint32_t freq);
 extern int ble_sm_alg_gen_dhkey(const uint8_t *peer_pub_key_x,
@@ -303,12 +303,7 @@ void esp_bt_rtc_slow_clk_select(uint8_t slow_clk_src)
     switch (slow_clk_src) {
         case MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL:
             ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using main XTAL as clock source");
-            uint32_t chip_version = efuse_hal_chip_revision();
-            if (chip_version == 0) {
-                modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (400 - 1));
-            } else{
-                modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (5 - 1));
-            }
+            modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (480 - 1));
             break;
         case MODEM_CLOCK_LPCLK_SRC_RC_SLOW:
             ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 136 kHz RC as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
@@ -373,57 +368,48 @@ IRAM_ATTR void controller_wakeup_cb(void *arg)
 }
 
 #if CONFIG_FREERTOS_USE_TICKLESS_IDLE
-// TODO: IDF-10765
-// static esp_err_t sleep_modem_ble_mac_retention_init(void *arg)
-// {
-    // uint8_t size;
-    // int extra = *(int *)arg;
-    // const sleep_retention_entries_config_t *ble_mac_modem_config = esp_ble_mac_retention_link_get(&size, extra);
-    // esp_err_t err = sleep_retention_entries_create(ble_mac_modem_config, size, REGDMA_LINK_PRI_BT_MAC_BB, SLEEP_RETENTION_MODULE_BLE_MAC);
-    // if (err == ESP_OK) {
-    //     ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Modem BLE MAC retention initialization");
-    // }
-    // return err;
-//     return ESP_OK;
-// }
+static esp_err_t sleep_modem_ble_mac_retention_init(void *arg)
+{
+    uint8_t size;
+    int extra = *(int *)arg;
+    sleep_retention_entries_config_t *ble_mac_modem_config = r_esp_ble_mac_retention_link_get(&size, extra);
+    esp_err_t err = sleep_retention_entries_create(ble_mac_modem_config, size, REGDMA_LINK_PRI_BT_MAC_BB, SLEEP_RETENTION_MODULE_BLE_MAC);
+    if (err == ESP_OK) {
+        ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Modem BLE MAC retention initialization");
+    }
+    return err;
+    return ESP_OK;
+}
 
 static esp_err_t sleep_modem_ble_mac_modem_state_init(uint8_t extra)
 {
-    // TODO: IDF-10765
-    // int retention_args = extra;
-    // sleep_retention_module_init_param_t init_param = {
-    //     .cbs     = { .create = { .handle = sleep_modem_ble_mac_retention_init, .arg = &retention_args } },
-    //     .depends = BIT(SLEEP_RETENTION_MODULE_BT_BB)
-    // };
-    // esp_err_t err = sleep_retention_module_init(SLEEP_RETENTION_MODULE_BLE_MAC, &init_param);
-    // if (err == ESP_OK) {
-    //     err = sleep_retention_module_allocate(SLEEP_RETENTION_MODULE_BLE_MAC);
-    // }
-    // return err;
-    ESP_LOGW(NIMBLE_PORT_LOG_TAG, "This func temporary not supported for current target!");
-    return ESP_OK;
+    int retention_args = extra;
+    sleep_retention_module_init_param_t init_param = {
+        .cbs     = { .create = { .handle = sleep_modem_ble_mac_retention_init, .arg = &retention_args } },
+        .depends = BIT(SLEEP_RETENTION_MODULE_BT_BB)
+    };
+    esp_err_t err = sleep_retention_module_init(SLEEP_RETENTION_MODULE_BLE_MAC, &init_param);
+    if (err == ESP_OK) {
+        err = sleep_retention_module_allocate(SLEEP_RETENTION_MODULE_BLE_MAC);
+    }
+    return err;
 }
 
 static void sleep_modem_ble_mac_modem_state_deinit(void)
 {
-    // TODO: IDF-10765
-    // esp_err_t err = sleep_retention_module_free(SLEEP_RETENTION_MODULE_BLE_MAC);
-    // if (err == ESP_OK) {
-    //     err = sleep_retention_module_deinit(SLEEP_RETENTION_MODULE_BLE_MAC);
-    //     assert(err == ESP_OK);
-    // }
-    ESP_LOGW(NIMBLE_PORT_LOG_TAG, "This func temporary not supported for current target!");
+    esp_err_t err = sleep_retention_module_free(SLEEP_RETENTION_MODULE_BLE_MAC);
+    if (err == ESP_OK) {
+        err = sleep_retention_module_deinit(SLEEP_RETENTION_MODULE_BLE_MAC);
+        assert(err == ESP_OK);
+    }
 }
 
 void sleep_modem_light_sleep_overhead_set(uint32_t overhead)
 {
-    // TODO: IDF-10765
-    // esp_ble_set_wakeup_overhead(overhead);
-    ESP_LOGW(NIMBLE_PORT_LOG_TAG, "This func temporary not supported for current target!");
+    r_esp_ble_set_wakeup_overhead(overhead);
 }
 #endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
 
-
 esp_err_t controller_sleep_init(void)
 {
     esp_err_t rc = 0;
@@ -446,7 +432,7 @@ esp_err_t controller_sleep_init(void)
     }
 #if CONFIG_FREERTOS_USE_TICKLESS_IDLE
     /* Create a new regdma link for BLE related register restoration */
-    rc = sleep_modem_ble_mac_modem_state_init(1);
+    rc = sleep_modem_ble_mac_modem_state_init(0);
     assert(rc == 0);
     esp_sleep_enable_bt_wakeup();
     ESP_LOGW(NIMBLE_PORT_LOG_TAG, "Enable light sleep, the wake up source is BLE timer");
diff --git a/components/bt/controller/lib_esp32c5/esp32c5-bt-lib b/components/bt/controller/lib_esp32c5/esp32c5-bt-lib
index 53056440bc..b4f67e85c5 160000
--- a/components/bt/controller/lib_esp32c5/esp32c5-bt-lib
+++ b/components/bt/controller/lib_esp32c5/esp32c5-bt-lib
@@ -1 +1 @@
-Subproject commit 53056440bc6e76f5bf00fd920769a4979dcc7d66
+Subproject commit b4f67e85c54cc8f55b5130e47805dc8c906a736c
diff --git a/components/esp_phy/esp32c5/include/btbb_retention_reg.h b/components/esp_phy/esp32c5/include/btbb_retention_reg.h
index fbb3997296..69a6d6618d 100644
--- a/components/esp_phy/esp32c5/include/btbb_retention_reg.h
+++ b/components/esp_phy/esp32c5/include/btbb_retention_reg.h
@@ -12,8 +12,8 @@ extern "C" {
 
 // btbb sleep retention reg
 
-#define BB_PART_0_SIZE 93
-#define BB_PART_1_SIZE 62
+#define BB_PART_0_SIZE 128
+#define BB_PART_1_SIZE 68
 #define BB_PART_2_SIZE 19
 #define BB_PART_0_ADDR 0x600A2000
 #define BB_PART_1_ADDR 0x600A2800
diff --git a/components/soc/esp32c5/include/soc/Kconfig.soc_caps.in b/components/soc/esp32c5/include/soc/Kconfig.soc_caps.in
index 05a536033d..6ddccc8adf 100644
--- a/components/soc/esp32c5/include/soc/Kconfig.soc_caps.in
+++ b/components/soc/esp32c5/include/soc/Kconfig.soc_caps.in
@@ -1235,6 +1235,10 @@ config SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH
     int
     default 12
 
+config SOC_PM_SUPPORT_BT_WAKEUP
+    bool
+    default y
+
 config SOC_PM_SUPPORT_EXT1_WAKEUP
     bool
     default y
diff --git a/components/soc/esp32c5/include/soc/soc_caps.h b/components/soc/esp32c5/include/soc/soc_caps.h
index 7dd26f79ec..920055d750 100644
--- a/components/soc/esp32c5/include/soc/soc_caps.h
+++ b/components/soc/esp32c5/include/soc/soc_caps.h
@@ -538,7 +538,7 @@
 /*-------------------------- Power Management CAPS ----------------------------*/
 // #define SOC_PM_SUPPORT_WIFI_WAKEUP      (1)
 // #define SOC_PM_SUPPORT_BEACON_WAKEUP    (1)
-// #define SOC_PM_SUPPORT_BT_WAKEUP        (1)
+#define SOC_PM_SUPPORT_BT_WAKEUP        (1)
 #define SOC_PM_SUPPORT_EXT1_WAKEUP      (1)
 #define SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN   (1) /*!<Supports one bit per pin to configure the EXT1 trigger level */
 #define SOC_PM_SUPPORT_CPU_PD           (1)
diff --git a/examples/bluetooth/.build-test-rules.yml b/examples/bluetooth/.build-test-rules.yml
index 782bd4d5d4..bab15073b0 100644
--- a/examples/bluetooth/.build-test-rules.yml
+++ b/examples/bluetooth/.build-test-rules.yml
@@ -200,10 +200,6 @@ examples/bluetooth/nimble/blecent:
   <<: *bt_default_depends
   disable:
     - if: SOC_BLE_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET in ["esp32c5"]
-      temporary: true
-      reason: Not supported yet
   depends_components:
     - bt
     - esp_phy
@@ -252,10 +248,6 @@ examples/bluetooth/nimble/power_save:
   <<: *bt_default_depends
   disable:
     - if: SOC_BLE_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET in ["esp32c5"]
-      temporary: true
-      reason: Not supported yet
   depends_components:
     - bt
     - esp_phy
diff --git a/examples/bluetooth/nimble/power_save/README.md b/examples/bluetooth/nimble/power_save/README.md
index f74f8b5cdd..ca3fe6853e 100644
--- a/examples/bluetooth/nimble/power_save/README.md
+++ b/examples/bluetooth/nimble/power_save/README.md
@@ -22,6 +22,8 @@ This example contains some build configurations. For each configuration, a few c
 - `sdkconfig.32m.esp32h2`: ESP32H2 uses main XTAL as low power clock in light sleep enabled.
 - `sdkconfig.defaults.esp32c2`: ESP32C2 uses 32kHz XTAL as low power clock in light sleep enabled.
 - `sdkconfig.26m.esp32c2`: ESP32C2 uses main XTAL as low power clock in light sleep enabled.
+- `sdkconfig.defaults.esp32c5`: ESP32C5 uses 32kHz XTAL as low power clock in light sleep enabled.
+- `sdkconfig.48m.esp32c5`: ESP32C5 uses main XTAL as low power clock in light sleep enabled.
 
 ## How to use example
 
diff --git a/examples/bluetooth/nimble/power_save/main/Kconfig.projbuild b/examples/bluetooth/nimble/power_save/main/Kconfig.projbuild
index ca160813fe..3baf775104 100644
--- a/examples/bluetooth/nimble/power_save/main/Kconfig.projbuild
+++ b/examples/bluetooth/nimble/power_save/main/Kconfig.projbuild
@@ -2,9 +2,10 @@ menu "Example Configuration"
 
     choice EXAMPLE_MAX_CPU_FREQ
         prompt "Maximum CPU frequency"
-        default EXAMPLE_MAX_CPU_FREQ_160 if !IDF_TARGET_ESP32H2 && !IDF_TARGET_ESP32C2
+        default EXAMPLE_MAX_CPU_FREQ_160 if !IDF_TARGET_ESP32H2 && !IDF_TARGET_ESP32C2 && !IDF_TARGET_ESP32C5
         default EXAMPLE_MAX_CPU_FREQ_96 if IDF_TARGET_ESP32H2
         default EXAMPLE_MAX_CPU_FREQ_120 if IDF_TARGET_ESP32C2
+        default EXAMPLE_MAX_CPU_FREQ_240 if IDF_TARGET_ESP32C5
         depends on PM_ENABLE
         help
             Maximum CPU frequency to use for dynamic frequency scaling.
@@ -21,7 +22,7 @@ menu "Example Configuration"
             depends on IDF_TARGET_ESP32C2
         config EXAMPLE_MAX_CPU_FREQ_240
             bool "240 MHz"
-            depends on IDF_TARGET_ESP32 || IDF_TARGET_ESP32S3
+            depends on IDF_TARGET_ESP32 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32C5
     endchoice
 
     config EXAMPLE_MAX_CPU_FREQ_MHZ
@@ -34,7 +35,8 @@ menu "Example Configuration"
 
     choice EXAMPLE_MIN_CPU_FREQ
         prompt "Minimum CPU frequency"
-        default EXAMPLE_MIN_CPU_FREQ_40M if !IDF_TARGET_ESP32H2 && !IDF_TARGET_ESP32C2
+        default EXAMPLE_MIN_CPU_FREQ_40M if !IDF_TARGET_ESP32H2 && !IDF_TARGET_ESP32C2 && !IDF_TARGET_ESP32C5
+        default EXAMPLE_MIN_CPU_FREQ_48M if IDF_TARGET_ESP32C5
         default EXAMPLE_MIN_CPU_FREQ_32M if IDF_TARGET_ESP32H2
         default EXAMPLE_MIN_CPU_FREQ_26M if IDF_TARGET_ESP32C2
         depends on PM_ENABLE
@@ -51,6 +53,9 @@ menu "Example Configuration"
                 BBPLL and then re-enable it with a different frequency.Since the
                 Bluetooth baseband works from PLL frequency, it will temporarily
                 lose its 80 MHz clock, while the BBPLL is disabled.
+        config EXAMPLE_MIN_CPU_FREQ_48M
+            bool "48 MHz (use with 48MHz XTAL)"
+            depends on XTAL_FREQ_48 || XTAL_FREQ_AUTO
         config EXAMPLE_MIN_CPU_FREQ_40M
             bool "40 MHz (use with 40MHz XTAL)"
             depends on XTAL_FREQ_40 || XTAL_FREQ_AUTO
@@ -73,6 +78,7 @@ menu "Example Configuration"
     config EXAMPLE_MIN_CPU_FREQ_MHZ
         int
         default 80 if EXAMPLE_MIN_CPU_FREQ_80M
+        default 48 if EXAMPLE_MIN_CPU_FREQ_48M
         default 40 if EXAMPLE_MIN_CPU_FREQ_40M
         default 32 if EXAMPLE_MIN_CPU_FREQ_32M
         default 26 if EXAMPLE_MIN_CPU_FREQ_26M
diff --git a/examples/bluetooth/nimble/power_save/sdkconfig.48m.esp32c5 b/examples/bluetooth/nimble/power_save/sdkconfig.48m.esp32c5
new file mode 100644
index 0000000000..3c0540b874
--- /dev/null
+++ b/examples/bluetooth/nimble/power_save/sdkconfig.48m.esp32c5
@@ -0,0 +1,22 @@
+CONFIG_IDF_TARGET="esp32c5"
+
+# Bluetooth Low Power Config
+CONFIG_BT_LE_SLEEP_ENABLE=y
+CONFIG_BT_LE_LP_CLK_SRC_MAIN_XTAL=y
+
+#
+# Power Management
+#
+CONFIG_PM_ENABLE=y
+CONFIG_PM_DFS_INIT_AUTO=y
+CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
+# end of Power Management
+
+CONFIG_FREERTOS_USE_TICKLESS_IDLE=y
+
+#
+# Sleep Config
+#
+CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y
+CONFIG_ESP_SLEEP_CACHE_SAFE_ASSERTION=y
+# end of Sleep Config
diff --git a/examples/bluetooth/nimble/power_save/sdkconfig.defaults.esp32c5 b/examples/bluetooth/nimble/power_save/sdkconfig.defaults.esp32c5
new file mode 100644
index 0000000000..8b53211402
--- /dev/null
+++ b/examples/bluetooth/nimble/power_save/sdkconfig.defaults.esp32c5
@@ -0,0 +1,29 @@
+CONFIG_IDF_TARGET="esp32c5"
+
+# Bluetooth Low Power Config
+CONFIG_BT_LE_SLEEP_ENABLE=y
+CONFIG_BT_LE_LP_CLK_SRC_DEFAULT=y
+
+#
+# Power Management
+#
+CONFIG_PM_ENABLE=y
+CONFIG_PM_DFS_INIT_AUTO=y
+CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
+CONFIG_PM_POWER_DOWN_PERIPHERAL_IN_LIGHT_SLEEP=y
+# end of Power Management
+
+CONFIG_FREERTOS_USE_TICKLESS_IDLE=y
+
+#
+# Sleep Config
+#
+CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y
+CONFIG_ESP_SLEEP_CACHE_SAFE_ASSERTION=y
+# end of Sleep Config
+
+#
+# RTC Clock Config
+#
+CONFIG_RTC_CLK_SRC_EXT_CRYS=y
+# end of RTC Clock Config
diff --git a/examples/bluetooth/nimble/pytest_nimble_test.py b/examples/bluetooth/nimble/pytest_nimble_test.py
index da3c89756e..c664d4d1c6 100644
--- a/examples/bluetooth/nimble/pytest_nimble_test.py
+++ b/examples/bluetooth/nimble/pytest_nimble_test.py
@@ -1,6 +1,5 @@
 # SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
 # SPDX-License-Identifier: CC0-1.0
-
 import os.path
 from typing import Tuple
 
@@ -14,6 +13,7 @@ from pytest_embedded_idf.dut import IdfDut
 @pytest.mark.esp32h2
 @pytest.mark.esp32c3
 @pytest.mark.esp32s3
+@pytest.mark.esp32c5
 @pytest.mark.esp32
 @pytest.mark.wifi_two_dut
 @pytest.mark.parametrize(