feedc0de/esp-idf
1
0
Fork 0
forked from espressif/esp-idf
Code Pull Requests Activity

spi_master: sct mode supported on c6

Browse Source
This commit is contained in:
wanlei
2023-03-10 19:31:54 +08:00
parent 1e6c61daa6
commit a307096ec0
4 changed files with 362 additions and 40 deletions
Download Patch File Download Diff File Expand all files Collapse all files

52
components/driver/test_apps/spi/master/main/test_spi_master_sct.c
View File

@@ -41,27 +41,16 @@ static void hd_master(void)
{
spi_device_handle_t handle;
spi_bus_config_t buscfg={
.mosi_io_num = SPI2_IOMUX_PIN_NUM_MOSI,
.miso_io_num = SPI2_IOMUX_PIN_NUM_MISO,
.sclk_io_num = SPI2_IOMUX_PIN_NUM_CLK,
.quadwp_io_num = -1,
.quadhd_io_num = -1,
.max_transfer_sz = 4092 * 10,
};
spi_bus_config_t buscfg = SPI_BUS_TEST_DEFAULT_CONFIG();
buscfg.max_transfer_sz = 4092 * 10;
spi_device_interface_config_t devcfg = {
.command_bits = 8,
.address_bits = 8,
.dummy_bits = 8,
.clock_speed_hz = 10 * 1000,
.duty_cycle_pos = 128, //50% duty cycle
.mode = 0,
.spics_io_num = SPI2_IOMUX_PIN_NUM_CS,
.cs_ena_posttrans = 3, //Keep the CS low 3 cycles after transaction, to stop slave from missing the last bit when CS has less propagation delay than CLK
.queue_size = 3,
.flags = SPI_DEVICE_HALFDUPLEX,
};
spi_device_interface_config_t devcfg = SPI_DEVICE_TEST_DEFAULT_CONFIG();
devcfg.command_bits = 8;
devcfg.address_bits = 8;
devcfg.dummy_bits = 8;
devcfg.clock_speed_hz = 10 * 1000;
devcfg.input_delay_ns = 0;
devcfg.flags = SPI_DEVICE_HALFDUPLEX;
TEST_ESP_OK(spi_bus_initialize(SPI2_HOST, &buscfg, SPI_DMA_CH_AUTO));
TEST_ESP_OK(spi_bus_add_device(SPI2_HOST, &devcfg, &handle));
@@ -181,26 +170,11 @@ static void hd_master(void)
static void hd_slave(void)
{
spi_bus_config_t bus_cfg = {
.miso_io_num = SPI2_IOMUX_PIN_NUM_MISO,
.mosi_io_num = SPI2_IOMUX_PIN_NUM_MOSI,
.sclk_io_num = SPI2_IOMUX_PIN_NUM_CLK,
.quadwp_io_num = -1,
.quadhd_io_num = -1,
.max_transfer_sz = 4092 * 4,
};
spi_bus_config_t buscfg = SPI_BUS_TEST_DEFAULT_CONFIG();
spi_slave_hd_slot_config_t slave_hd_cfg = SPI_SLOT_TEST_DEFAULT_CONFIG();
slave_hd_cfg.dma_chan = SPI_DMA_CH_AUTO,
spi_slave_hd_slot_config_t slave_hd_cfg = {
.spics_io_num = SPI2_IOMUX_PIN_NUM_CS,
.dma_chan = SPI_DMA_CH_AUTO,
.flags = 0,
.mode = 0,
.command_bits = 8,
.address_bits = 8,
.dummy_bits = 8,
.queue_size = 4,
};
TEST_ESP_OK(spi_slave_hd_init(SPI2_HOST, &bus_cfg, &slave_hd_cfg));
TEST_ESP_OK(spi_slave_hd_init(SPI2_HOST, &buscfg, &slave_hd_cfg));
spi_slave_hd_data_t *ret_trans = NULL;

328
components/hal/esp32c6/include/hal/spi_ll.h
View File

@@ -644,8 +644,8 @@ static inline void spi_ll_master_set_line_mode(spi_dev_t *hw, spi_line_mode_t li
hw->ctrl.faddr_dual = (line_mode.addr_lines == 2);
hw->ctrl.faddr_quad = (line_mode.addr_lines == 4);
hw->ctrl.fread_dual = (line_mode.data_lines == 2);
hw->user.fwrite_dual = (line_mode.data_lines == 2);
hw->ctrl.fread_quad = (line_mode.data_lines == 4);
hw->user.fwrite_dual = (line_mode.data_lines == 2);
hw->user.fwrite_quad = (line_mode.data_lines == 4);
}
@@ -1167,6 +1167,332 @@ static inline uint32_t spi_ll_slave_hd_get_last_addr(spi_dev_t *hw)
return hw->slave1.slv_last_addr;
}
/*------------------------------------------------------------------------------
* Segmented-Configure-Transfer
*----------------------------------------------------------------------------*/
#define SPI_LL_CONF_BUF_SET_BIT(_w, _m) ({ \
(_w) |= (_m); \
})
#define SPI_LL_CONF_BUF_CLR_BIT(_w, _m) ({ \
(_w) &= ~(_m); \
})
#define SPI_LL_CONF_BUF_SET_FIELD(_w, _f, val) ({ \
((_w) = (((_w) & ~((_f##_V) << (_f##_S))) | (((val) & (_f##_V))<<(_f##_S)))); \
})
#define SPI_LL_CONF_BUF_GET_FIELD(_w, _f) ({ \
(((_w) >> (_f##_S)) & (_f##_V)); \
})
//This offset is 1, for bitmap
#define SPI_LL_CONF_BUFFER_OFFSET (1)
//bitmap must be the first
#define SPI_LL_CONF_BITMAP_POS (0)
#define SPI_LL_ADDR_REG_POS (0)
#define SPI_LL_CTRL_REG_POS (1)
#define SPI_LL_CLOCK_REG_POS (2)
#define SPI_LL_USER_REG_POS (3)
#define SPI_LL_USER1_REG_POS (4)
#define SPI_LL_USER2_REG_POS (5)
#define SPI_LL_MS_DLEN_REG_POS (6)
#define SPI_LL_MISC_REG_POS (7)
#define SPI_LL_DIN_MODE_REG_POS (8)
#define SPI_LL_DIN_NUM_REG_POS (9)
#define SPI_LL_DOUT_MODE_REG_POS (10)
#define SPI_LL_DMA_CONF_REG_POS (11)
#define SPI_LL_DMA_INT_ENA_REG_POS (12)
#define SPI_LL_DMA_INT_CLR_REG_POS (13)
#define SPI_LL_SCT_MAGIC_NUMBER (0x2)
/**
* Set conf phase bits len to HW for segment config trans mode.
*
* @param hw Beginning address of the peripheral registers.
* @param conf_bitlen Value of field conf_bitslen in cmd reg.
*/
static inline void spi_ll_set_conf_phase_bits_len(spi_dev_t *hw, uint32_t conf_bitlen)
{
if (conf_bitlen <= SOC_SPI_SCT_CONF_BITLEN_MAX) {
hw->cmd.conf_bitlen = conf_bitlen;
}
}
/**
* Update the conf buffer for conf phase
*
* @param hw Beginning address of the peripheral registers.
* @param is_end Is this transaction the end of this segment.
* @param conf_buffer Conf buffer to be updated.
*/
static inline void spi_ll_format_conf_phase_conf_buffer(spi_dev_t *hw, bool is_end, uint32_t conf_buffer[SOC_SPI_SCT_BUFFER_NUM_MAX])
{
//user reg: usr_conf_nxt
if (is_end) {
SPI_LL_CONF_BUF_CLR_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_CONF_NXT_M);
} else {
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_CONF_NXT_M);
}
}
/**
* Update the line mode of conf buffer for conf phase
*
* @param hw Beginning address of the peripheral registers.
* @param line_mode line mode struct of each phase.
* @param conf_buffer Conf buffer to be updated.
*/
static inline void spi_ll_format_line_mode_conf_buff(spi_dev_t *hw, spi_line_mode_t line_mode, uint32_t conf_buffer[SOC_SPI_SCT_BUFFER_NUM_MAX])
{
conf_buffer[SPI_LL_CTRL_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] &= ~SPI_LL_ONE_LINE_CTRL_MASK;
conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] &= ~SPI_LL_ONE_LINE_USER_MASK;
switch (line_mode.cmd_lines)
{
case 2: SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_CTRL_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_FCMD_DUAL_M); break;
case 4: SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_CTRL_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_FCMD_QUAD_M); break;
default: break;
}
switch (line_mode.addr_lines)
{
case 2: SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_CTRL_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_FADDR_DUAL_M); break;
case 4: SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_CTRL_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_FADDR_QUAD_M); break;
default: break;
}
switch (line_mode.data_lines)
{
case 2: SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_CTRL_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_FREAD_DUAL_M );
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_FWRITE_DUAL_M);
break;
case 4: SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_CTRL_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_FREAD_QUAD_M );
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_FWRITE_QUAD_M);
break;
default: break;
}
}
/**
* Update the conf buffer for prep phase
*
* @param hw Beginning address of the peripheral registers.
* @param setup CS setup time
* @param conf_buffer Conf buffer to be updated.
*/
static inline void spi_ll_format_prep_phase_conf_buffer(spi_dev_t *hw, uint8_t setup, uint32_t conf_buffer[SOC_SPI_SCT_BUFFER_NUM_MAX])
{
//user reg: cs_setup
if(setup) {
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_CS_SETUP_M);
} else {
SPI_LL_CONF_BUF_CLR_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_CS_SETUP_M);
}
//user1 reg: cs_setup_time
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_USER1_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_CS_SETUP_TIME, setup - 1);
}
/**
* Update the conf buffer for cmd phase
*
* @param hw Beginning address of the peripheral registers.
* @param cmd Command value
* @param cmdlen Length of the cmd phase
* @param lsbfirst Whether LSB first
* @param conf_buffer Conf buffer to be updated.
*/
static inline void spi_ll_format_cmd_phase_conf_buffer(spi_dev_t *hw, uint16_t cmd, int cmdlen, bool lsbfirst, uint32_t conf_buffer[SOC_SPI_SCT_BUFFER_NUM_MAX])
{
//user reg: usr_command
if (cmdlen) {
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_COMMAND_M);
} else {
SPI_LL_CONF_BUF_CLR_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_COMMAND_M);
}
//user2 reg: usr_command_bitlen
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_USER2_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_COMMAND_BITLEN, cmdlen - 1);
//user2 reg: usr_command_value
if (lsbfirst) {
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_USER2_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_COMMAND_VALUE, cmd);
} else {
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_USER2_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_COMMAND_VALUE, HAL_SPI_SWAP_DATA_TX(cmd, cmdlen));
}
}
/**
* Update the conf buffer for addr phase
*
* @param hw Beginning address of the peripheral registers.
* @param addr Address to set
* @param addrlen Length of the address phase
* @param lsbfirst whether the LSB first feature is enabled.
* @param conf_buffer Conf buffer to be updated.
*/
static inline void spi_ll_format_addr_phase_conf_buffer(spi_dev_t *hw, uint64_t addr, int addrlen, bool lsbfirst, uint32_t conf_buffer[SOC_SPI_SCT_BUFFER_NUM_MAX])
{
//user reg: usr_addr
if (addrlen) {
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_ADDR_M);
} else {
SPI_LL_CONF_BUF_CLR_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_ADDR_M);
}
//user1 reg: usr_addr_bitlen
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_USER1_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_ADDR_BITLEN, addrlen - 1);
//addr reg: addr
if (lsbfirst) {
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_ADDR_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_ADDR_VALUE, HAL_SWAP32(addr));
} else {
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_ADDR_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_ADDR_VALUE, (addr << (32 - addrlen)));
}
}
/**
* Update the conf buffer for dummy phase
*
* @param hw Beginning address of the peripheral registers.
* @param dummy_n Dummy cycles used. 0 to disable the dummy phase.
* @param conf_buffer Conf buffer to be updated.
*/
static inline void spi_ll_format_dummy_phase_conf_buffer(spi_dev_t *hw, int dummy_n, uint32_t conf_buffer[SOC_SPI_SCT_BUFFER_NUM_MAX])
{
//user reg: usr_dummy
if (dummy_n) {
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_DUMMY_M);
} else {
SPI_LL_CONF_BUF_CLR_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_DUMMY_M);
}
//user1 reg: usr_dummy_cyclelen
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_USER1_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_DUMMY_CYCLELEN, dummy_n - 1);
}
/**
* Update the conf buffer for dout phase
*
* @param hw Beginning address of the peripheral registers.
* @param bitlen output length, in bits.
* @param conf_buffer Conf buffer to be updated.
*/
static inline void spi_ll_format_dout_phase_conf_buffer(spi_dev_t *hw, int bitlen, uint32_t conf_buffer[SOC_SPI_SCT_BUFFER_NUM_MAX])
{
if (bitlen) {
//user reg: usr_mosi
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_MOSI_M);
//dma_conf reg: dma_tx_ena
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_DMA_CONF_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_DMA_TX_ENA_M);
//ms_dlen reg: ms_data_bitlen
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_MS_DLEN_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_MS_DATA_BITLEN, bitlen - 1);
} else {
//user reg: usr_mosi
SPI_LL_CONF_BUF_CLR_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_MOSI_M);
//dma_conf reg: dma_tx_ena
SPI_LL_CONF_BUF_CLR_BIT(conf_buffer[SPI_LL_DMA_CONF_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_DMA_TX_ENA_M);
}
}
/**
* Update the conf buffer for din phase
*
* @param hw Beginning address of the peripheral registers.
* @param bitlen input length, in bits.
* @param conf_buffer Conf buffer to be updated.
*/
static inline void spi_ll_format_din_phase_conf_buffer(spi_dev_t *hw, int bitlen, uint32_t conf_buffer[SOC_SPI_SCT_BUFFER_NUM_MAX])
{
if (bitlen) {
//user reg: usr_miso
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_MISO_M);
//dma_conf reg: dma_rx_ena
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_DMA_CONF_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_DMA_RX_ENA_M);
//ms_dlen reg: ms_data_bitlen
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_MS_DLEN_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_MS_DATA_BITLEN, bitlen - 1);
} else {
//user reg: usr_miso
SPI_LL_CONF_BUF_CLR_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_USR_MISO_M);
//dma_conf reg: dma_rx_ena
SPI_LL_CONF_BUF_CLR_BIT(conf_buffer[SPI_LL_DMA_CONF_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_DMA_RX_ENA_M);
}
}
/**
* Update the conf buffer for done phase
*
* @param hw Beginning address of the peripheral registers.
* @param setup CS hold time
* @param conf_buffer Conf buffer to be updated.
*/
static inline void spi_ll_format_done_phase_conf_buffer(spi_dev_t *hw, int hold, uint32_t conf_buffer[SOC_SPI_SCT_BUFFER_NUM_MAX])
{
//user reg: cs_hold
if(hold) {
SPI_LL_CONF_BUF_SET_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_CS_HOLD_M);
} else {
SPI_LL_CONF_BUF_CLR_BIT(conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_CS_HOLD_M);
}
//user1 reg: cs_hold_time
SPI_LL_CONF_BUF_SET_FIELD(conf_buffer[SPI_LL_USER1_REG_POS + SPI_LL_CONF_BUFFER_OFFSET], SPI_CS_HOLD_TIME, hold);
}
/**
* Initialize the conf buffer:
*
* - init bitmap
* - save all register values into the rest of the conf buffer words
*
* @param hw Beginning address of the peripheral registers.
* @param conf_buffer Conf buffer to be updated.
*/
__attribute__((always_inline))
static inline void spi_ll_init_conf_buffer(spi_dev_t *hw, uint32_t conf_buffer[SOC_SPI_SCT_BUFFER_NUM_MAX])
{
conf_buffer[SPI_LL_CONF_BITMAP_POS] = 0x7FFF | (SPI_LL_SCT_MAGIC_NUMBER << 28);
conf_buffer[SPI_LL_ADDR_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->addr.usr_addr_value;
conf_buffer[SPI_LL_CTRL_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->ctrl.val;
conf_buffer[SPI_LL_CLOCK_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->clock.val;
conf_buffer[SPI_LL_USER_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->user.val;
conf_buffer[SPI_LL_USER1_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->user1.val;
conf_buffer[SPI_LL_USER2_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->user2.val;
conf_buffer[SPI_LL_MS_DLEN_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->ms_dlen.val;
conf_buffer[SPI_LL_MISC_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->misc.val;
conf_buffer[SPI_LL_DIN_MODE_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->din_mode.val;
conf_buffer[SPI_LL_DIN_NUM_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->din_num.val;
conf_buffer[SPI_LL_DOUT_MODE_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->dout_mode.val;
conf_buffer[SPI_LL_DMA_CONF_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->dma_conf.val;
conf_buffer[SPI_LL_DMA_INT_ENA_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->dma_int_ena.val;
conf_buffer[SPI_LL_DMA_INT_CLR_REG_POS + SPI_LL_CONF_BUFFER_OFFSET] = hw->dma_int_clr.val;
}
/**
* Enable/Disable the conf phase
*
* @param hw Beginning address of the peripheral registers.
* @param enable True: enable; False: disable
*/
static inline void spi_ll_conf_state_enable(spi_dev_t *hw, bool enable)
{
hw->slave.usr_conf = enable;
}
/**
* Set Segmented-Configure-Transfer required magic value
*
* @param hw Beginning address of the peripheral registers.
* @param magic_value magic value
*/
static inline void spi_ll_set_magic_number(spi_dev_t *hw, uint8_t magic_value)
{
hw->slave.dma_seg_magic_value = magic_value;
}
#undef SPI_LL_RST_MASK
#undef SPI_LL_UNUSED_INT_MASK

16
components/soc/esp32c6/include/soc/Kconfig.soc_caps.in
View File

@@ -963,6 +963,22 @@ config SOC_SPI_SUPPORT_CLK_RC_FAST
bool
default y
config SOC_SPI_SCT_SUPPORTED
bool
default y
config SOC_SPI_SCT_REG_NUM
int
default 14
config SOC_SPI_SCT_BUFFER_NUM_MAX
bool
default y
config SOC_SPI_SCT_CONF_BITLEN_MAX
hex
default 0x3FFFA
config SOC_MEMSPI_IS_INDEPENDENT
bool
default y

6
components/soc/esp32c6/include/soc/soc_caps.h
View File

@@ -392,6 +392,12 @@
// host_id = 0 -> SPI0/SPI1, host_id = 1 -> SPI2,
#define SOC_SPI_PERIPH_SUPPORT_MULTILINE_MODE(host_id) ({(void)host_id; 1;})
#define SOC_SPI_SCT_SUPPORTED 1
#define SOC_SPI_SCT_SUPPORTED_PERIPH(PERIPH_NUM) ((PERIPH_NUM==1) ? 1 : 0) //Support Segmented-Configure-Transfer
#define SOC_SPI_SCT_REG_NUM 14
#define SOC_SPI_SCT_BUFFER_NUM_MAX (1 + SOC_SPI_SCT_REG_NUM) //1-word-bitmap + 14-word-regs
#define SOC_SPI_SCT_CONF_BITLEN_MAX 0x3FFFA //18 bits wide reg
#define SOC_MEMSPI_IS_INDEPENDENT 1
#define SOC_SPI_MAX_PRE_DIVIDER 16