diff --git a/examples/peripherals/spi_slave/README.md b/examples/peripherals/spi_slave/README.md
index af864f697b..3083e5643f 100644
--- a/examples/peripherals/spi_slave/README.md
+++ b/examples/peripherals/spi_slave/README.md
@@ -7,13 +7,13 @@ These two projects illustrate the SPI Slave driver. They're supposed to be flash
 
 The default GPIOs used in the example are the following:
 
-| Signal    | ESP32  | ESP32-S2 | ESP32-C3 | ESP32-C6 | ESP32-H2 |
-|-----------|--------|----------|----------|----------|----------|
-| Handshake | GPIO2  | GPIO2    | GPIO3    | GPIO15   | GPIO2    |
-| MOSI      | GPIO12 | GPIO12   | GPIO7    | GPIO20   | GPIO5    |
-| MISO      | GPIO13 | GPIO13   | GPIO2    | GPIO19   | GPIO0    |
-| SCLK      | GPIO15 | GPIO15   | GPIO6    | GPIO18   | GPIO4    |
-| CS        | GPIO14 | GPIO14   | GPIO10   | GPIO9    | GPIO1    |
+| Signal    | ESP32  | ESP32-S2 | ESP32-S3 | ESP32-C3 | ESP32-C6 | ESP32-H2 |
+|-----------|--------|----------|----------|----------|----------|----------|
+| Handshake | GPIO2  | GPIO2    | GPIO2    | GPIO3    | GPIO15   | GPIO2    |
+| MOSI      | GPIO12 | GPIO12   | GPIO11   | GPIO7    | GPIO20   | GPIO5    |
+| MISO      | GPIO13 | GPIO13   | GPIO13   | GPIO2    | GPIO19   | GPIO0    |
+| SCLK      | GPIO15 | GPIO15   | GPIO12   | GPIO6    | GPIO18   | GPIO4    |
+| CS        | GPIO14 | GPIO14   | GPIO10   | GPIO10   | GPIO9    | GPIO1    |
 
 
 Please run wires between the following GPIOs between the slave and master to make the example function:
@@ -26,4 +26,4 @@ Please run wires between the following GPIOs between the slave and master to mak
 | SCLK       | SCLK      |
 | CS         | CS        |
 
-Be aware that the example by default uses lines normally reserved for JTAG on ESP32. If this is an issue, either because of hardwired JTAG hardware or because of the need to do JTAG debugging, feel free to change the GPIO settings by editing defines in the top of main.c in the master/slave source code.
\ No newline at end of file
+Be aware that the example by default uses lines normally reserved for JTAG on ESP32. If this is an issue, either because of hardwired JTAG hardware or because of the need to do JTAG debugging, feel free to change the GPIO settings by editing defines in the top of main.c in the master/slave source code.