feedc0de/esp-idf
1
0
Fork 0
forked from espressif/esp-idf
Code Pull Requests Activity

eth: support W5500 in network examples

Browse Source
This commit is contained in:
morris
2020-11-06 16:06:20 +08:00
parent 1e905acacf
commit aea901f014
9 changed files with 291 additions and 139 deletions
Download Patch File Download Diff File Expand all files Collapse all files

42
examples/common_components/protocol_examples_common/Kconfig.projbuild
View File

@ -33,7 +33,7 @@ menu "Example Connection Configuration"
choice EXAMPLE_USE_ETHERNET
prompt "Ethernet Type"
default EXAMPLE_USE_INTERNAL_ETHERNET if IDF_TARGET_ESP32
default EXAMPLE_USE_DM9051 if !IDF_TARGET_ESP32
default EXAMPLE_USE_W5500
help
Select which kind of Ethernet will be used in the example.
@ -51,6 +51,13 @@ menu "Example Connection Configuration"
help
Select external SPI-Ethernet module.
config EXAMPLE_USE_W5500
bool "W5500 Module"
select ETH_USE_SPI_ETHERNET
select ETH_SPI_ETHERNET_W5500
help
Select external SPI-Ethernet module (W5500).
config EXAMPLE_USE_OPENETH
bool "OpenCores Ethernet MAC (EXPERIMENTAL)"
select ETH_USE_OPENETH
@ -108,55 +115,55 @@ menu "Example Connection Configuration"
Set the GPIO number used by SMI MDIO.
endif
if EXAMPLE_USE_DM9051
config EXAMPLE_DM9051_SPI_HOST
if ETH_USE_SPI_ETHERNET
config EXAMPLE_ETH_SPI_HOST
int "SPI Host Number"
range 0 2
default 1
help
Set the SPI host used to communicate with DM9051.
Set the SPI host used to communicate with the SPI Ethernet Controller.
config EXAMPLE_DM9051_SCLK_GPIO
config EXAMPLE_ETH_SPI_SCLK_GPIO
int "SPI SCLK GPIO number"
range 0 33
default 19
default 20
help
Set the GPIO number used by SPI SCLK.
config EXAMPLE_DM9051_MOSI_GPIO
config EXAMPLE_ETH_SPI_MOSI_GPIO
int "SPI MOSI GPIO number"
range 0 33
default 23
default 19
help
Set the GPIO number used by SPI MOSI.
config EXAMPLE_DM9051_MISO_GPIO
config EXAMPLE_ETH_SPI_MISO_GPIO
int "SPI MISO GPIO number"
range 0 33
default 25
default 18
help
Set the GPIO number used by SPI MISO.
config EXAMPLE_DM9051_CS_GPIO
config EXAMPLE_ETH_SPI_CS_GPIO
int "SPI CS GPIO number"
range 0 33
default 22
default 21
help
Set the GPIO number used by SPI CS.
config EXAMPLE_DM9051_SPI_CLOCK_MHZ
config EXAMPLE_ETH_SPI_CLOCK_MHZ
int "SPI clock speed (MHz)"
range 20 80
default 20
default 36
help
Set the clock speed (MHz) of SPI interface.
config EXAMPLE_DM9051_INT_GPIO
config EXAMPLE_ETH_SPI_INT_GPIO
int "Interrupt GPIO number"
default 4
help
Set the GPIO number used by DM9051 interrupt.
endif
Set the GPIO number used by the SPI Ethernet module interrupt line.
endif # ETH_USE_SPI_ETHERNET
config EXAMPLE_ETH_PHY_RST_GPIO
int "PHY Reset GPIO number"
@ -168,7 +175,6 @@ menu "Example Connection Configuration"
config EXAMPLE_ETH_PHY_ADDR
int "PHY Address"
range 0 31 if EXAMPLE_USE_INTERNAL_ETHERNET
range 1 1 if !EXAMPLE_USE_INTERNAL_ETHERNET
default 1
help
Set PHY address according your board schematic.

48
examples/common_components/protocol_examples_common/connect.c
View File

@ -15,7 +15,10 @@
#include "esp_wifi_default.h"
#if CONFIG_EXAMPLE_CONNECT_ETHERNET
#include "esp_eth.h"
#endif
#if CONFIG_ETH_USE_SPI_ETHERNET
#include "driver/spi_master.h"
#endif // CONFIG_ETH_USE_SPI_ETHERNET
#endif // CONFIG_EXAMPLE_CONNECT_ETHERNET
#include "esp_log.h"
#include "esp_netif.h"
#include "driver/gpio.h"
@ -359,31 +362,48 @@ static esp_netif_t* eth_start(void)
#elif CONFIG_EXAMPLE_ETH_PHY_DP83848
s_phy = esp_eth_phy_new_dp83848(&phy_config);
#endif
#elif CONFIG_EXAMPLE_USE_DM9051
#elif CONFIG_ETH_USE_SPI_ETHERNET
gpio_install_isr_service(0);
spi_device_handle_t spi_handle = NULL;
spi_bus_config_t buscfg = {
.miso_io_num = CONFIG_EXAMPLE_DM9051_MISO_GPIO,
.mosi_io_num = CONFIG_EXAMPLE_DM9051_MOSI_GPIO,
.sclk_io_num = CONFIG_EXAMPLE_DM9051_SCLK_GPIO,
.miso_io_num = CONFIG_EXAMPLE_ETH_SPI_MISO_GPIO,
.mosi_io_num = CONFIG_EXAMPLE_ETH_SPI_MOSI_GPIO,
.sclk_io_num = CONFIG_EXAMPLE_ETH_SPI_SCLK_GPIO,
.quadwp_io_num = -1,
.quadhd_io_num = -1,
};
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_DM9051_SPI_HOST, &buscfg, 1));
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_ETH_SPI_HOST, &buscfg, 1));
#if CONFIG_EXAMPLE_USE_DM9051
spi_device_interface_config_t devcfg = {
.command_bits = 1,
.address_bits = 7,
.mode = 0,
.clock_speed_hz = CONFIG_EXAMPLE_DM9051_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_DM9051_CS_GPIO,
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_ETH_SPI_CS_GPIO,
.queue_size = 20
};
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_DM9051_SPI_HOST, &devcfg, &spi_handle));
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_ETH_SPI_HOST, &devcfg, &spi_handle));
/* dm9051 ethernet driver is based on spi driver */
eth_dm9051_config_t dm9051_config = ETH_DM9051_DEFAULT_CONFIG(spi_handle);
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_DM9051_INT_GPIO;
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_ETH_SPI_INT_GPIO;
s_mac = esp_eth_mac_new_dm9051(&dm9051_config, &mac_config);
s_phy = esp_eth_phy_new_dm9051(&phy_config);
#elif CONFIG_EXAMPLE_USE_W5500
spi_device_interface_config_t devcfg = {
.command_bits = 16, // Actually it's the address phase in W5500 SPI frame
.address_bits = 8, // Actually it's the control phase in W5500 SPI frame
.mode = 0,
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_ETH_SPI_CS_GPIO,
.queue_size = 20
};
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_ETH_SPI_HOST, &devcfg, &spi_handle));
/* w5500 ethernet driver is based on spi driver */
eth_w5500_config_t w5500_config = ETH_W5500_DEFAULT_CONFIG(spi_handle);
w5500_config.int_gpio_num = CONFIG_EXAMPLE_ETH_SPI_INT_GPIO;
s_mac = esp_eth_mac_new_w5500(&w5500_config, &mac_config);
s_phy = esp_eth_phy_new_w5500(&phy_config);
#endif
#elif CONFIG_EXAMPLE_USE_OPENETH
phy_config.autonego_timeout_ms = 100;
s_mac = esp_eth_mac_new_openeth(&mac_config);
@ -393,6 +413,14 @@ static esp_netif_t* eth_start(void)
// Install Ethernet driver
esp_eth_config_t config = ETH_DEFAULT_CONFIG(s_mac, s_phy);
ESP_ERROR_CHECK(esp_eth_driver_install(&config, &s_eth_handle));
#if !CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET
/* The SPI Ethernet module might doesn't have a burned factory MAC address, we cat to set it manually.
02:00:00 is a Locally Administered OUI range so should not be used except when testing on a LAN under your control.
*/
ESP_ERROR_CHECK(esp_eth_ioctl(s_eth_handle, ETH_CMD_S_MAC_ADDR, (uint8_t[]) {
0x02, 0x00, 0x00, 0x12, 0x34, 0x56
}));
#endif
// combine driver with netif
s_eth_glue = esp_eth_new_netif_glue(s_eth_handle);
esp_netif_attach(netif, s_eth_glue);

47
examples/ethernet/basic/main/Kconfig.projbuild
View File

@ -2,7 +2,7 @@ menu "Example Configuration"
choice EXAMPLE_USE_ETHERNET
prompt "Ethernet Type"
default EXAMPLE_USE_INTERNAL_ETHERNET if IDF_TARGET_ESP32
default EXAMPLE_USE_DM9051 if !IDF_TARGET_ESP32
default EXAMPLE_USE_W5500
help
Select which kind of Ethernet will be used in the example.
@ -20,7 +20,13 @@ menu "Example Configuration"
help
Select external SPI-Ethernet module (DM9051).
endchoice
config EXAMPLE_USE_W5500
bool "W5500 Module"
select ETH_USE_SPI_ETHERNET
select ETH_SPI_ETHERNET_W5500
help
Select external SPI-Ethernet module (W5500).
endchoice # EXAMPLE_USE_ETHERNET
if EXAMPLE_USE_INTERNAL_ETHERNET
choice EXAMPLE_ETH_PHY_MODEL
@ -58,7 +64,7 @@ menu "Example Configuration"
help
The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
Goto https://www.microchip.com/wwwproducts/en/KSZ8041 for more information about it.
endchoice
endchoice # EXAMPLE_ETH_PHY_MODEL
config EXAMPLE_ETH_MDC_GPIO
int "SMI MDC GPIO number"
@ -71,57 +77,57 @@ menu "Example Configuration"
default 18
help
Set the GPIO number used by SMI MDIO.
endif
endif # EXAMPLE_USE_INTERNAL_ETHERNET
if EXAMPLE_USE_DM9051
config EXAMPLE_DM9051_SPI_HOST
if ETH_USE_SPI_ETHERNET
config EXAMPLE_ETH_SPI_HOST
int "SPI Host Number"
range 0 2
default 1
help
Set the SPI host used to communicate with the SPI Ethernet Controller.
config EXAMPLE_DM9051_SCLK_GPIO
config EXAMPLE_ETH_SPI_SCLK_GPIO
int "SPI SCLK GPIO number"
range 0 33
default 19
default 20
help
Set the GPIO number used by SPI SCLK.
config EXAMPLE_DM9051_MOSI_GPIO
config EXAMPLE_ETH_SPI_MOSI_GPIO
int "SPI MOSI GPIO number"
range 0 33
default 23
default 19
help
Set the GPIO number used by SPI MOSI.
config EXAMPLE_DM9051_MISO_GPIO
config EXAMPLE_ETH_SPI_MISO_GPIO
int "SPI MISO GPIO number"
range 0 33
default 25
default 18
help
Set the GPIO number used by SPI MISO.
config EXAMPLE_DM9051_CS_GPIO
config EXAMPLE_ETH_SPI_CS_GPIO
int "SPI CS GPIO number"
range 0 33
default 22
default 21
help
Set the GPIO number used by SPI CS.
config EXAMPLE_DM9051_SPI_CLOCK_MHZ
config EXAMPLE_ETH_SPI_CLOCK_MHZ
int "SPI clock speed (MHz)"
range 5 80
default 20
default 36
help
Set the clock speed (MHz) of SPI interface.
config EXAMPLE_DM9051_INT_GPIO
config EXAMPLE_ETH_SPI_INT_GPIO
int "Interrupt GPIO number"
default 4
help
Set the GPIO number used by DM9051 interrupt.
endif
Set the GPIO number used by the SPI Ethernet module interrupt line.
endif # ETH_USE_SPI_ETHERNET
config EXAMPLE_ETH_PHY_RST_GPIO
int "PHY Reset GPIO number"
@ -132,8 +138,7 @@ menu "Example Configuration"
config EXAMPLE_ETH_PHY_ADDR
int "PHY Address"
range 0 31 if EXAMPLE_USE_INTERNAL_ETHERNET
range 1 1 if !EXAMPLE_USE_INTERNAL_ETHERNET
range 0 31
default 1
help
Set PHY address according your board schematic.

46
examples/ethernet/basic/main/ethernet_example_main.c
View File

@ -16,6 +16,9 @@
#include "esp_log.h"
#include "driver/gpio.h"
#include "sdkconfig.h"
#if CONFIG_ETH_USE_SPI_ETHERNET
#include "driver/spi_master.h"
#endif // CONFIG_ETH_USE_SPI_ETHERNET
static const char *TAG = "eth_example";
@ -96,35 +99,60 @@ void app_main(void)
#elif CONFIG_EXAMPLE_ETH_PHY_KSZ8041
esp_eth_phy_t *phy = esp_eth_phy_new_ksz8041(&phy_config);
#endif
#elif CONFIG_EXAMPLE_USE_DM9051
#elif CONFIG_ETH_USE_SPI_ETHERNET
gpio_install_isr_service(0);
spi_device_handle_t spi_handle = NULL;
spi_bus_config_t buscfg = {
.miso_io_num = CONFIG_EXAMPLE_DM9051_MISO_GPIO,
.mosi_io_num = CONFIG_EXAMPLE_DM9051_MOSI_GPIO,
.sclk_io_num = CONFIG_EXAMPLE_DM9051_SCLK_GPIO,
.miso_io_num = CONFIG_EXAMPLE_ETH_SPI_MISO_GPIO,
.mosi_io_num = CONFIG_EXAMPLE_ETH_SPI_MOSI_GPIO,
.sclk_io_num = CONFIG_EXAMPLE_ETH_SPI_SCLK_GPIO,
.quadwp_io_num = -1,
.quadhd_io_num = -1,
};
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_DM9051_SPI_HOST, &buscfg, 1));
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_ETH_SPI_HOST, &buscfg, 1));
#if CONFIG_EXAMPLE_USE_DM9051
spi_device_interface_config_t devcfg = {
.command_bits = 1,
.address_bits = 7,
.mode = 0,
.clock_speed_hz = CONFIG_EXAMPLE_DM9051_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_DM9051_CS_GPIO,
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_ETH_SPI_CS_GPIO,
.queue_size = 20
};
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_DM9051_SPI_HOST, &devcfg, &spi_handle));
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_ETH_SPI_HOST, &devcfg, &spi_handle));
/* dm9051 ethernet driver is based on spi driver */
eth_dm9051_config_t dm9051_config = ETH_DM9051_DEFAULT_CONFIG(spi_handle);
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_DM9051_INT_GPIO;
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_ETH_SPI_INT_GPIO;
esp_eth_mac_t *mac = esp_eth_mac_new_dm9051(&dm9051_config, &mac_config);
esp_eth_phy_t *phy = esp_eth_phy_new_dm9051(&phy_config);
#elif CONFIG_EXAMPLE_USE_W5500
spi_device_interface_config_t devcfg = {
.command_bits = 16, // Actually it's the address phase in W5500 SPI frame
.address_bits = 8, // Actually it's the control phase in W5500 SPI frame
.mode = 0,
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_ETH_SPI_CS_GPIO,
.queue_size = 20
};
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_ETH_SPI_HOST, &devcfg, &spi_handle));
/* w5500 ethernet driver is based on spi driver */
eth_w5500_config_t w5500_config = ETH_W5500_DEFAULT_CONFIG(spi_handle);
w5500_config.int_gpio_num = CONFIG_EXAMPLE_ETH_SPI_INT_GPIO;
esp_eth_mac_t *mac = esp_eth_mac_new_w5500(&w5500_config, &mac_config);
esp_eth_phy_t *phy = esp_eth_phy_new_w5500(&phy_config);
#endif
#endif // CONFIG_ETH_USE_SPI_ETHERNET
esp_eth_config_t config = ETH_DEFAULT_CONFIG(mac, phy);
esp_eth_handle_t eth_handle = NULL;
ESP_ERROR_CHECK(esp_eth_driver_install(&config, &eth_handle));
#if CONFIG_ETH_USE_SPI_ETHERNET
/* The SPI Ethernet module might doesn't have a burned factory MAC address, we cat to set it manually.
02:00:00 is a Locally Administered OUI range so should not be used except when testing on a LAN under your control.
*/
ESP_ERROR_CHECK(esp_eth_ioctl(eth_handle, ETH_CMD_S_MAC_ADDR, (uint8_t[]) {
0x02, 0x00, 0x00, 0x12, 0x34, 0x56
}));
#endif
/* attach Ethernet driver to TCP/IP stack */
ESP_ERROR_CHECK(esp_netif_attach(eth_netif, esp_eth_new_netif_glue(eth_handle)));
/* start Ethernet driver state machine */

3
examples/ethernet/enc28j60/main/enc28j60_example_main.c
View File

@ -8,6 +8,7 @@
*/
#include <stdio.h>
#include <string.h>
#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_netif.h"
@ -16,7 +17,7 @@
#include "esp_log.h"
#include "driver/gpio.h"
#include "enc28j60.h"
#include "sdkconfig.h"
#include "driver/spi_master.h"
static const char *TAG = "eth_example";

60
examples/ethernet/eth2ap/main/Kconfig.projbuild
View File

@ -2,7 +2,7 @@ menu "Example Configuration"
choice EXAMPLE_USE_ETHERNET
prompt "Ethernet Type"
default EXAMPLE_USE_INTERNAL_ETHERNET if IDF_TARGET_ESP32
default EXAMPLE_USE_DM9051 if !IDF_TARGET_ESP32
default EXAMPLE_USE_W5500
help
Select which kind of Ethernet will be used in the example.
@ -18,8 +18,15 @@ menu "Example Configuration"
select ETH_USE_SPI_ETHERNET
select ETH_SPI_ETHERNET_DM9051
help
Select external SPI-Ethernet module.
endchoice
Select external SPI-Ethernet module (DM9051).
config EXAMPLE_USE_W5500
bool "W5500 Module"
select ETH_USE_SPI_ETHERNET
select ETH_SPI_ETHERNET_W5500
help
Select external SPI-Ethernet module (W5500).
endchoice # EXAMPLE_USE_ETHERNET
if EXAMPLE_USE_INTERNAL_ETHERNET
choice EXAMPLE_ETH_PHY_MODEL
@ -51,7 +58,13 @@ menu "Example Configuration"
help
DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
Goto http://www.ti.com/product/DP83848J for more information about it.
endchoice
config EXAMPLE_ETH_PHY_KSZ8041
bool "KSZ8041"
help
The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
Goto https://www.microchip.com/wwwproducts/en/KSZ8041 for more information about it.
endchoice # EXAMPLE_ETH_PHY_MODEL
config EXAMPLE_ETH_MDC_GPIO
int "SMI MDC GPIO number"
@ -64,57 +77,57 @@ menu "Example Configuration"
default 18
help
Set the GPIO number used by SMI MDIO.
endif
endif # EXAMPLE_USE_INTERNAL_ETHERNET
if EXAMPLE_USE_DM9051
config EXAMPLE_DM9051_SPI_HOST
if ETH_USE_SPI_ETHERNET
config EXAMPLE_ETH_SPI_HOST
int "SPI Host Number"
range 0 2
default 1
help
Set the SPI host used to communicate with DM9051.
Set the SPI host used to communicate with the SPI Ethernet Controller.
config EXAMPLE_DM9051_SCLK_GPIO
config EXAMPLE_ETH_SPI_SCLK_GPIO
int "SPI SCLK GPIO number"
range 0 33
default 19
default 20
help
Set the GPIO number used by SPI SCLK.
config EXAMPLE_DM9051_MOSI_GPIO
config EXAMPLE_ETH_SPI_MOSI_GPIO
int "SPI MOSI GPIO number"
range 0 33
default 23
default 19
help
Set the GPIO number used by SPI MOSI.
config EXAMPLE_DM9051_MISO_GPIO
config EXAMPLE_ETH_SPI_MISO_GPIO
int "SPI MISO GPIO number"
range 0 33
default 25
default 18
help
Set the GPIO number used by SPI MISO.
config EXAMPLE_DM9051_CS_GPIO
config EXAMPLE_ETH_SPI_CS_GPIO
int "SPI CS GPIO number"
range 0 33
default 22
default 21
help
Set the GPIO number used by SPI CS.
config EXAMPLE_DM9051_SPI_CLOCK_MHZ
config EXAMPLE_ETH_SPI_CLOCK_MHZ
int "SPI clock speed (MHz)"
range 20 80
default 20
range 5 80
default 36
help
Set the clock speed (MHz) of SPI interface.
config EXAMPLE_DM9051_INT_GPIO
config EXAMPLE_ETH_SPI_INT_GPIO
int "Interrupt GPIO number"
default 4
help
Set the GPIO number used by DM9051 interrupt.
endif
Set the GPIO number used by the SPI Ethernet module interrupt line.
endif # ETH_USE_SPI_ETHERNET
config EXAMPLE_ETH_PHY_RST_GPIO
int "PHY Reset GPIO number"
@ -125,8 +138,7 @@ menu "Example Configuration"
config EXAMPLE_ETH_PHY_ADDR
int "PHY Address"
range 0 31 if EXAMPLE_USE_INTERNAL_ETHERNET
range 1 1 if !EXAMPLE_USE_INTERNAL_ETHERNET
range 0 31
default 1
help
Set PHY address according your board schematic.

50
examples/ethernet/eth2ap/main/ethernet_example_main.c
View File

@ -8,6 +8,7 @@
*/
#include <string.h>
#include <stdlib.h>
#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
@ -18,7 +19,9 @@
#include "nvs_flash.h"
#include "esp_private/wifi.h"
#include "driver/gpio.h"
#include "sdkconfig.h"
#if CONFIG_ETH_USE_SPI_ETHERNET
#include "driver/spi_master.h"
#endif
static const char *TAG = "eth_example";
static esp_eth_handle_t s_eth_handle = NULL;
@ -166,36 +169,63 @@ static void initialize_ethernet(void)
esp_eth_phy_t *phy = esp_eth_phy_new_lan8720(&phy_config);
#elif CONFIG_EXAMPLE_ETH_PHY_DP83848
esp_eth_phy_t *phy = esp_eth_phy_new_dp83848(&phy_config);
#elif CONFIG_EXAMPLE_ETH_PHY_KSZ8041
esp_eth_phy_t *phy = esp_eth_phy_new_ksz8041(&phy_config);
#endif
#elif CONFIG_EXAMPLE_USE_DM9051
#elif CONFIG_ETH_USE_SPI_ETHERNET
gpio_install_isr_service(0);
spi_device_handle_t spi_handle = NULL;
spi_bus_config_t buscfg = {
.miso_io_num = CONFIG_EXAMPLE_DM9051_MISO_GPIO,
.mosi_io_num = CONFIG_EXAMPLE_DM9051_MOSI_GPIO,
.sclk_io_num = CONFIG_EXAMPLE_DM9051_SCLK_GPIO,
.miso_io_num = CONFIG_EXAMPLE_ETH_SPI_MISO_GPIO,
.mosi_io_num = CONFIG_EXAMPLE_ETH_SPI_MOSI_GPIO,
.sclk_io_num = CONFIG_EXAMPLE_ETH_SPI_SCLK_GPIO,
.quadwp_io_num = -1,
.quadhd_io_num = -1,
};
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_DM9051_SPI_HOST, &buscfg, 1));
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_ETH_SPI_HOST, &buscfg, 1));
#if CONFIG_EXAMPLE_USE_DM9051
spi_device_interface_config_t devcfg = {
.command_bits = 1,
.address_bits = 7,
.mode = 0,
.clock_speed_hz = CONFIG_EXAMPLE_DM9051_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_DM9051_CS_GPIO,
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_ETH_SPI_CS_GPIO,
.queue_size = 20
};
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_DM9051_SPI_HOST, &devcfg, &spi_handle));
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_ETH_SPI_HOST, &devcfg, &spi_handle));
/* dm9051 ethernet driver is based on spi driver */
eth_dm9051_config_t dm9051_config = ETH_DM9051_DEFAULT_CONFIG(spi_handle);
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_DM9051_INT_GPIO;
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_ETH_SPI_INT_GPIO;
esp_eth_mac_t *mac = esp_eth_mac_new_dm9051(&dm9051_config, &mac_config);
esp_eth_phy_t *phy = esp_eth_phy_new_dm9051(&phy_config);
#elif CONFIG_EXAMPLE_USE_W5500
spi_device_interface_config_t devcfg = {
.command_bits = 16, // Actually it's the address phase in W5500 SPI frame
.address_bits = 8, // Actually it's the control phase in W5500 SPI frame
.mode = 0,
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_ETH_SPI_CS_GPIO,
.queue_size = 20
};
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_ETH_SPI_HOST, &devcfg, &spi_handle));
/* w5500 ethernet driver is based on spi driver */
eth_w5500_config_t w5500_config = ETH_W5500_DEFAULT_CONFIG(spi_handle);
w5500_config.int_gpio_num = CONFIG_EXAMPLE_ETH_SPI_INT_GPIO;
esp_eth_mac_t *mac = esp_eth_mac_new_w5500(&w5500_config, &mac_config);
esp_eth_phy_t *phy = esp_eth_phy_new_w5500(&phy_config);
#endif
#endif // CONFIG_ETH_USE_SPI_ETHERNET
esp_eth_config_t config = ETH_DEFAULT_CONFIG(mac, phy);
config.stack_input = pkt_eth2wifi;
ESP_ERROR_CHECK(esp_eth_driver_install(&config, &s_eth_handle));
#if CONFIG_ETH_USE_SPI_ETHERNET
/* The SPI Ethernet module might doesn't have a burned factory MAC address, we cat to set it manually.
02:00:00 is a Locally Administered OUI range so should not be used except when testing on a LAN under your control.
*/
ESP_ERROR_CHECK(esp_eth_ioctl(s_eth_handle, ETH_CMD_S_MAC_ADDR, (uint8_t[]) {
0x02, 0x00, 0x00, 0x12, 0x34, 0x56
}));
#endif
esp_eth_ioctl(s_eth_handle, ETH_CMD_S_PROMISCUOUS, (void *)true);
esp_eth_start(s_eth_handle);
}

60
examples/ethernet/iperf/main/Kconfig.projbuild
View File

@ -10,7 +10,7 @@ menu "Example Configuration"
choice EXAMPLE_USE_ETHERNET
prompt "Ethernet Type"
default EXAMPLE_USE_INTERNAL_ETHERNET if IDF_TARGET_ESP32
default EXAMPLE_USE_DM9051 if !IDF_TARGET_ESP32
default EXAMPLE_USE_W5500
help
Select which kind of Ethernet will be used in the example.
@ -26,8 +26,15 @@ menu "Example Configuration"
select ETH_USE_SPI_ETHERNET
select ETH_SPI_ETHERNET_DM9051
help
Select external SPI-Ethernet module.
endchoice
Select external SPI-Ethernet module (DM9051).
config EXAMPLE_USE_W5500
bool "W5500 Module"
select ETH_USE_SPI_ETHERNET
select ETH_SPI_ETHERNET_W5500
help
Select external SPI-Ethernet module (W5500).
endchoice # EXAMPLE_USE_ETHERNET
if EXAMPLE_USE_INTERNAL_ETHERNET
choice EXAMPLE_ETH_PHY_MODEL
@ -59,7 +66,13 @@ menu "Example Configuration"
help
DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
Goto http://www.ti.com/product/DP83848J for more information about it.
endchoice
config EXAMPLE_ETH_PHY_KSZ8041
bool "KSZ8041"
help
The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
Goto https://www.microchip.com/wwwproducts/en/KSZ8041 for more information about it.
endchoice # EXAMPLE_ETH_PHY_MODEL
config EXAMPLE_ETH_MDC_GPIO
int "SMI MDC GPIO number"
@ -72,57 +85,57 @@ menu "Example Configuration"
default 18
help
Set the GPIO number used by SMI MDIO.
endif
endif # EXAMPLE_USE_INTERNAL_ETHERNET
if EXAMPLE_USE_DM9051
config EXAMPLE_DM9051_SPI_HOST
if ETH_USE_SPI_ETHERNET
config EXAMPLE_ETH_SPI_HOST
int "SPI Host Number"
range 0 2
default 1
help
Set the SPI host used to communicate with DM9051.
Set the SPI host used to communicate with the SPI Ethernet Controller.
config EXAMPLE_DM9051_SCLK_GPIO
config EXAMPLE_ETH_SPI_SCLK_GPIO
int "SPI SCLK GPIO number"
range 0 33
default 19
default 20
help
Set the GPIO number used by SPI SCLK.
config EXAMPLE_DM9051_MOSI_GPIO
config EXAMPLE_ETH_SPI_MOSI_GPIO
int "SPI MOSI GPIO number"
range 0 33
default 23
default 19
help
Set the GPIO number used by SPI MOSI.
config EXAMPLE_DM9051_MISO_GPIO
config EXAMPLE_ETH_SPI_MISO_GPIO
int "SPI MISO GPIO number"
range 0 33
default 25
default 18
help
Set the GPIO number used by SPI MISO.
config EXAMPLE_DM9051_CS_GPIO
config EXAMPLE_ETH_SPI_CS_GPIO
int "SPI CS GPIO number"
range 0 33
default 22
default 21
help
Set the GPIO number used by SPI CS.
config EXAMPLE_DM9051_SPI_CLOCK_MHZ
config EXAMPLE_ETH_SPI_CLOCK_MHZ
int "SPI clock speed (MHz)"
range 20 80
default 20
range 5 80
default 36
help
Set the clock speed (MHz) of SPI interface.
config EXAMPLE_DM9051_INT_GPIO
config EXAMPLE_ETH_SPI_INT_GPIO
int "Interrupt GPIO number"
default 4
help
Set the GPIO number used by DM9051 interrupt.
endif
Set the GPIO number used by the SPI Ethernet module interrupt line.
endif # ETH_USE_SPI_ETHERNET
config EXAMPLE_ETH_PHY_RST_GPIO
int "PHY Reset GPIO number"
@ -133,8 +146,7 @@ menu "Example Configuration"
config EXAMPLE_ETH_PHY_ADDR
int "PHY Address"
range 0 31 if EXAMPLE_USE_INTERNAL_ETHERNET
range 1 1 if !EXAMPLE_USE_INTERNAL_ETHERNET
range 0 31
default 1
help
Set PHY address according your board schematic.

48
examples/ethernet/iperf/main/cmd_ethernet.c
View File

@ -19,6 +19,9 @@
#include "argtable3/argtable3.h"
#include "iperf.h"
#include "sdkconfig.h"
#if CONFIG_ETH_USE_SPI_ETHERNET
#include "driver/spi_master.h"
#endif // CONFIG_ETH_USE_SPI_ETHERNET
static esp_netif_ip_info_t ip;
static bool started = false;
@ -202,35 +205,62 @@ void register_ethernet(void)
esp_eth_phy_t *phy = esp_eth_phy_new_lan8720(&phy_config);
#elif CONFIG_EXAMPLE_ETH_PHY_DP83848
esp_eth_phy_t *phy = esp_eth_phy_new_dp83848(&phy_config);
#elif CONFIG_EXAMPLE_ETH_PHY_KSZ8041
esp_eth_phy_t *phy = esp_eth_phy_new_ksz8041(&phy_config);
#endif
#elif CONFIG_EXAMPLE_USE_DM9051
#elif CONFIG_ETH_USE_SPI_ETHERNET
gpio_install_isr_service(0);
spi_device_handle_t spi_handle = NULL;
spi_bus_config_t buscfg = {
.miso_io_num = CONFIG_EXAMPLE_DM9051_MISO_GPIO,
.mosi_io_num = CONFIG_EXAMPLE_DM9051_MOSI_GPIO,
.sclk_io_num = CONFIG_EXAMPLE_DM9051_SCLK_GPIO,
.miso_io_num = CONFIG_EXAMPLE_ETH_SPI_MISO_GPIO,
.mosi_io_num = CONFIG_EXAMPLE_ETH_SPI_MOSI_GPIO,
.sclk_io_num = CONFIG_EXAMPLE_ETH_SPI_SCLK_GPIO,
.quadwp_io_num = -1,
.quadhd_io_num = -1,
};
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_DM9051_SPI_HOST, &buscfg, 1));
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_ETH_SPI_HOST, &buscfg, 1));
#if CONFIG_EXAMPLE_USE_DM9051
spi_device_interface_config_t devcfg = {
.command_bits = 1,
.address_bits = 7,
.mode = 0,
.clock_speed_hz = CONFIG_EXAMPLE_DM9051_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_DM9051_CS_GPIO,
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_ETH_SPI_CS_GPIO,
.queue_size = 20
};
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_DM9051_SPI_HOST, &devcfg, &spi_handle));
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_ETH_SPI_HOST, &devcfg, &spi_handle));
/* dm9051 ethernet driver is based on spi driver */
eth_dm9051_config_t dm9051_config = ETH_DM9051_DEFAULT_CONFIG(spi_handle);
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_DM9051_INT_GPIO;
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_ETH_SPI_INT_GPIO;
esp_eth_mac_t *mac = esp_eth_mac_new_dm9051(&dm9051_config, &mac_config);
esp_eth_phy_t *phy = esp_eth_phy_new_dm9051(&phy_config);
#elif CONFIG_EXAMPLE_USE_W5500
spi_device_interface_config_t devcfg = {
.command_bits = 16, // Actually it's the address phase in W5500 SPI frame
.address_bits = 8, // Actually it's the control phase in W5500 SPI frame
.mode = 0,
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
.spics_io_num = CONFIG_EXAMPLE_ETH_SPI_CS_GPIO,
.queue_size = 20
};
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_ETH_SPI_HOST, &devcfg, &spi_handle));
/* w5500 ethernet driver is based on spi driver */
eth_w5500_config_t w5500_config = ETH_W5500_DEFAULT_CONFIG(spi_handle);
w5500_config.int_gpio_num = CONFIG_EXAMPLE_ETH_SPI_INT_GPIO;
esp_eth_mac_t *mac = esp_eth_mac_new_w5500(&w5500_config, &mac_config);
esp_eth_phy_t *phy = esp_eth_phy_new_w5500(&phy_config);
#endif
#endif // CONFIG_ETH_USE_SPI_ETHERNET
esp_eth_config_t config = ETH_DEFAULT_CONFIG(mac, phy);
ESP_ERROR_CHECK(esp_eth_driver_install(&config, &eth_handle));
#if CONFIG_ETH_USE_SPI_ETHERNET
/* The SPI Ethernet module might doesn't have a burned factory MAC address, we cat to set it manually.
02:00:00 is a Locally Administered OUI range so should not be used except when testing on a LAN under your control.
*/
ESP_ERROR_CHECK(esp_eth_ioctl(eth_handle, ETH_CMD_S_MAC_ADDR, (uint8_t[]) {
0x02, 0x00, 0x00, 0x12, 0x34, 0x56
}));
#endif
ESP_ERROR_CHECK(esp_netif_attach(eth_netif, esp_eth_new_netif_glue(eth_handle)));
ESP_ERROR_CHECK(esp_eth_start(eth_handle));