Merge branch 'fix/fix_p4_deepsleep_io_leakage' into 'master'

fix(esp_hw_support): fix esp32p4 JTAG pad deepsleep current leakage Closes PM-204 See merge request espressif/esp-idf!35633
2024-12-24 15:36:09 +08:00
parent d24e09393d 58786528fd
commit bba3063b52
16 changed files with 167 additions and 2 deletions
--- a/components/esp_hw_support/port/esp32p4/pmu_sleep.c
+++ b/components/esp_hw_support/port/esp32p4/pmu_sleep.c
@@ -24,6 +24,7 @@
 #include "soc/pmu_reg.h"
 #include "soc/pmu_struct.h"
 #include "hal/clk_tree_hal.h"
+#include "hal/gpio_hal.h"
 #include "hal/lp_aon_hal.h"
 #include "soc/lp_system_reg.h"
 #include "hal/pmu_hal.h"
@@ -242,6 +243,26 @@ static void pmu_sleep_digital_init(pmu_context_t *ctx, const pmu_sleep_digital_c
 {
    pmu_ll_hp_set_dig_pad_slp_sel   (ctx->hal->dev, HP(SLEEP), dig->syscntl.dig_pad_slp_sel);
    pmu_ll_hp_set_hold_all_lp_pad   (ctx->hal->dev, HP(SLEEP), dig->syscntl.lp_pad_hold_all);
+
+    // Lowpower workaround for LP pad holding, JTAG IOs is located on lp_pad on esp32p4, if hold its
+    // default state on sleep, there's a high current leakage.
+    if (dig->syscntl.lp_pad_hold_all) {
+        gpio_hal_context_t gpio_hal = {
+            .dev = GPIO_HAL_GET_HW(GPIO_PORT_0)
+        };
+        if ((LP_IOMUX.pad[2].mux_sel == 0) && (IO_MUX.gpio[2].mcu_sel == 0)) {
+            gpio_hal_isolate_in_sleep(&gpio_hal, 2); // MTCK
+        }
+        if ((LP_IOMUX.pad[3].mux_sel == 0) && (IO_MUX.gpio[3].mcu_sel == 0)) {
+            gpio_hal_isolate_in_sleep(&gpio_hal, 3); // MTDI
+        }
+        if ((LP_IOMUX.pad[4].mux_sel == 0) && (IO_MUX.gpio[4].mcu_sel == 0)) {
+            gpio_hal_isolate_in_sleep(&gpio_hal, 4); // MTMS
+        }
+        if ((LP_IOMUX.pad[5].mux_sel == 0) && (IO_MUX.gpio[5].mcu_sel == 0)) {
+            gpio_hal_isolate_in_sleep(&gpio_hal, 5); // MTDO
+        }
+    }
 }

 static void pmu_sleep_analog_init(pmu_context_t *ctx, const pmu_sleep_analog_config_t *analog, bool dslp)
@@ -376,6 +397,11 @@ TCM_IRAM_ATTR uint32_t pmu_sleep_start(uint32_t wakeup_opt, uint32_t reject_opt,
    }
 #endif

+    // The PMU state machine will switch PAD to sleep setting and do IO holding at the same stage.
+    // IO may be held to an indeterminate state, so the software needs to trigger the PAD to switch
+    // to the sleep setting before starting the PMU state machine.
+    pmu_ll_imm_set_pad_slp_sel(PMU_instance()->hal->dev, true);
+
    /* Start entry into sleep mode */
    pmu_ll_hp_set_sleep_enable(PMU_instance()->hal->dev);

@@ -412,6 +438,8 @@ TCM_IRAM_ATTR bool pmu_sleep_finish(bool dslp)
        pmu_sleep_shutdown_ldo();
    }

+    pmu_ll_imm_set_pad_slp_sel(PMU_instance()->hal->dev, false);
+
    // Wait eFuse memory update done.
    while(efuse_ll_get_controller_state() != EFUSE_CONTROLLER_STATE_IDLE);

--- a/components/esp_hw_support/port/esp32p4/private_include/pmu_param.h
+++ b/components/esp_hw_support/port/esp32p4/private_include/pmu_param.h
@@ -331,7 +331,7 @@ typedef struct {

 #define PMU_SLEEP_DIGITAL_LSLP_CONFIG_DEFAULT(pd_flags) {               \
    .syscntl = {                                                        \
-        .dig_pad_slp_sel = (pd_flags & PMU_SLEEP_PD_TOP) ? 0 : 1,       \
+        .dig_pad_slp_sel = 0,                                           \
        .lp_pad_hold_all = (pd_flags & PMU_SLEEP_PD_LP_PERIPH) ? 1 : 0, \
    }                                                                   \
 }
--- a/components/hal/esp32/include/hal/gpio_ll.h
+++ b/components/hal/esp32/include/hal/gpio_ll.h
@@ -169,6 +169,7 @@ static inline bool gpio_ll_pulldown_is_enabled(gpio_dev_t *hw, uint32_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -180,6 +181,7 @@ static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -192,6 +194,7 @@ static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param gpio_num GPIO number
  * @return if GPIO gpio_num`s SLP_SEL is true
  */
+__attribute__((always_inline))
 static inline bool gpio_ll_sleep_sel_is_enabled(gpio_dev_t *hw, uint32_t gpio_num)
 {
    return REG_GET_BIT(GPIO_PIN_MUX_REG[gpio_num], SLP_SEL) ? true : false;
@@ -203,6 +206,7 @@ static inline bool gpio_ll_sleep_sel_is_enabled(gpio_dev_t *hw, uint32_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -214,6 +218,7 @@ static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -226,6 +231,7 @@ static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param gpio_num GPIO number
  * @return if GPIO gpio_num`s SLP_PU is true
  */
+__attribute__((always_inline))
 static inline bool gpio_ll_sleep_pullup_is_enabled(gpio_dev_t *hw, uint32_t gpio_num)
 {
    return REG_GET_BIT(GPIO_PIN_MUX_REG[gpio_num], SLP_PU) ? true : false;
@@ -237,6 +243,7 @@ static inline bool gpio_ll_sleep_pullup_is_enabled(gpio_dev_t *hw, uint32_t gpio
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -248,6 +255,7 @@ static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -260,6 +268,7 @@ static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param gpio_num GPIO number
  * @return if GPIO gpio_num`s SLP_PD is true
  */
+__attribute__((always_inline))
 static inline bool gpio_ll_sleep_pulldown_is_enabled(gpio_dev_t *hw, uint32_t gpio_num)
 {
    return REG_GET_BIT(GPIO_PIN_MUX_REG[gpio_num], SLP_PD) ? true : false;
@@ -418,6 +427,7 @@ static inline void gpio_ll_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -429,6 +439,7 @@ static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -440,6 +451,7 @@ static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -451,6 +463,7 @@ static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
--- a/components/hal/esp32c2/include/hal/gpio_ll.h
+++ b/components/hal/esp32c2/include/hal/gpio_ll.h
@@ -603,6 +603,7 @@ static inline void gpio_ll_force_unhold_all(void)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -614,6 +615,7 @@ static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -625,6 +627,7 @@ static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -636,6 +639,7 @@ static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -647,6 +651,7 @@ static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -658,6 +663,7 @@ static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -669,6 +675,7 @@ static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -680,6 +687,7 @@ static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -691,6 +699,7 @@ static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -702,6 +711,7 @@ static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
--- a/components/hal/esp32c3/include/hal/gpio_ll.h
+++ b/components/hal/esp32c3/include/hal/gpio_ll.h
@@ -576,6 +576,7 @@ static inline void gpio_ll_force_unhold_all(void)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -587,6 +588,7 @@ static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -598,6 +600,7 @@ static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -609,6 +612,7 @@ static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -620,6 +624,7 @@ static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -631,6 +636,7 @@ static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -642,6 +648,7 @@ static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -653,6 +660,7 @@ static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -664,6 +672,7 @@ static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -675,6 +684,7 @@ static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
--- a/components/hal/esp32c5/include/hal/gpio_ll.h
+++ b/components/hal/esp32c5/include/hal/gpio_ll.h
@@ -617,6 +617,7 @@ static inline void gpio_ll_force_unhold_all(void)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].slp_sel = 1;
@@ -629,6 +630,7 @@ static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].slp_sel = 0;
@@ -640,6 +642,7 @@ static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_wpu = 0;
@@ -651,6 +654,7 @@ static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_wpu = 1;
@@ -662,6 +666,7 @@ static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_wpd = 1;
@@ -673,6 +678,7 @@ static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_wpd = 0;
@@ -684,6 +690,7 @@ static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_ie = 0;
@@ -695,6 +702,7 @@ static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_ie = 1;
@@ -706,6 +714,7 @@ static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_oe = 0;
@@ -717,6 +726,7 @@ static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_oe = 1;
--- a/components/hal/esp32c6/include/hal/gpio_ll.h
+++ b/components/hal/esp32c6/include/hal/gpio_ll.h
@@ -600,6 +600,7 @@ static inline void gpio_ll_force_unhold_all(void)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_ENABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -612,6 +613,7 @@ static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_DISABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -623,6 +625,7 @@ static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_DISABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -634,6 +637,7 @@ static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_ENABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -645,6 +649,7 @@ static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_ENABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -656,6 +661,7 @@ static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_DISABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -667,6 +673,7 @@ static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_DISABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -678,6 +685,7 @@ static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_ENABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -689,6 +697,7 @@ static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_DISABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -700,6 +709,7 @@ static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_ENABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
--- a/components/hal/esp32c61/include/hal/gpio_ll.h
+++ b/components/hal/esp32c61/include/hal/gpio_ll.h
@@ -616,6 +616,7 @@ static inline void gpio_ll_force_unhold_all(void)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpion[gpio_num].gpion_slp_sel = 1;
@@ -628,6 +629,7 @@ static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpion[gpio_num].gpion_slp_sel = 0;
@@ -639,6 +641,7 @@ static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpion[gpio_num].gpion_mcu_wpu = 0;
@@ -650,6 +653,7 @@ static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpion[gpio_num].gpion_mcu_wpu = 1;
@@ -661,6 +665,7 @@ static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpion[gpio_num].gpion_mcu_wpd = 1;
@@ -672,6 +677,7 @@ static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpion[gpio_num].gpion_mcu_wpd = 0;
@@ -683,6 +689,7 @@ static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpion[gpio_num].gpion_mcu_ie = 0;
@@ -694,6 +701,7 @@ static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpion[gpio_num].gpion_mcu_ie = 1;
@@ -705,6 +713,7 @@ static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpion[gpio_num].gpion_mcu_oe = 0;
@@ -716,6 +725,7 @@ static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpion[gpio_num].gpion_mcu_oe = 1;
--- a/components/hal/esp32h2/include/hal/gpio_ll.h
+++ b/components/hal/esp32h2/include/hal/gpio_ll.h
@@ -648,6 +648,7 @@ static inline void gpio_ll_force_unhold_all(void)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, gpio_num_t gpio_num)
 {
    PIN_SLP_SEL_ENABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -660,6 +661,7 @@ static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, gpio_num_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
 {
    PIN_SLP_SEL_DISABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -671,6 +673,7 @@ static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
 {
    PIN_SLP_PULLUP_DISABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -682,6 +685,7 @@ static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, gpio_num_t gpio_num)
 {
    PIN_SLP_PULLUP_ENABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -693,6 +697,7 @@ static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, gpio_num_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, gpio_num_t gpio_num)
 {
    PIN_SLP_PULLDOWN_ENABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -704,6 +709,7 @@ static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, gpio_num_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
 {
    PIN_SLP_PULLDOWN_DISABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -715,6 +721,7 @@ static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, gpio_num_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
 {
    PIN_SLP_INPUT_DISABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -726,6 +733,7 @@ static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, gpio_num_t gpio_n
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, gpio_num_t gpio_num)
 {
    PIN_SLP_INPUT_ENABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -737,6 +745,7 @@ static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, gpio_num_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
 {
    PIN_SLP_OUTPUT_DISABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
@@ -748,6 +757,7 @@ static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, gpio_num_t gpio_
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, gpio_num_t gpio_num)
 {
    PIN_SLP_OUTPUT_ENABLE(IO_MUX_GPIO0_REG + (gpio_num * 4));
--- a/components/hal/esp32p4/include/hal/gpio_ll.h
+++ b/components/hal/esp32p4/include/hal/gpio_ll.h
@@ -19,6 +19,7 @@
 #include "soc/soc.h"
 #include "soc/gpio_periph.h"
 #include "soc/gpio_struct.h"
+#include "soc/io_mux_reg.h"
 #include "soc/io_mux_struct.h"
 #include "soc/hp_system_struct.h"
 #include "soc/lp_iomux_struct.h"
@@ -723,6 +724,7 @@ static inline void gpio_ll_force_unhold_all(void)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].slp_sel = 1;
@@ -735,6 +737,7 @@ static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].slp_sel = 0;
@@ -746,6 +749,7 @@ static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_wpu = 0;
@@ -757,6 +761,7 @@ static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_wpu = 1;
@@ -768,6 +773,7 @@ static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_wpd = 1;
@@ -779,6 +785,7 @@ static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_wpd = 0;
@@ -790,6 +797,7 @@ static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_ie = 0;
@@ -801,6 +809,7 @@ static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_ie = 1;
@@ -812,6 +821,7 @@ static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_oe = 0;
@@ -823,11 +833,13 @@ static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    IO_MUX.gpio[gpio_num].mcu_oe = 1;
 }

+
 #ifdef __cplusplus
 }
 #endif
--- a/components/hal/esp32p4/include/hal/pmu_ll.h
+++ b/components/hal/esp32p4/include/hal/pmu_ll.h
@@ -348,6 +348,17 @@ FORCE_INLINE_ATTR void pmu_ll_imm_set_lp_rootclk_sel(pmu_dev_t *hw, bool rootclk
    }
 }

+FORCE_INLINE_ATTR void pmu_ll_imm_set_pad_slp_sel(pmu_dev_t *hw, bool sleep_sel)
+{
+    if (sleep_sel) {
+        // Switch the pad configuration from active state to sleep state
+        hw->imm.pad_hold_all.tie_high_pad_slp_sel = 1;
+    } else {
+        // Switch the pad configuration from sleep state to active state
+        hw->imm.pad_hold_all.tie_low_pad_slp_sel = 1;
+    }
+}
+
 FORCE_INLINE_ATTR void pmu_ll_imm_set_hp_pad_hold_all(pmu_dev_t *hw, bool hold_all)
 {
    if (hold_all) {
--- a/components/hal/esp32s2/include/hal/gpio_ll.h
+++ b/components/hal/esp32s2/include/hal/gpio_ll.h
@@ -611,6 +611,7 @@ static inline void gpio_ll_force_unhold_all(void)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -622,6 +623,7 @@ static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -633,6 +635,7 @@ static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -644,6 +647,7 @@ static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -655,6 +659,7 @@ static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -666,6 +671,7 @@ static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -677,6 +683,7 @@ static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -688,6 +695,7 @@ static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -699,6 +707,7 @@ static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -710,6 +719,7 @@ static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
--- a/components/hal/esp32s3/include/hal/gpio_ll.h
+++ b/components/hal/esp32s3/include/hal/gpio_ll.h
@@ -590,6 +590,7 @@ static inline void gpio_ll_force_unhold_all(void)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -601,6 +602,7 @@ static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_SEL_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -612,6 +614,7 @@ static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -623,6 +626,7 @@ static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLUP_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -634,6 +638,7 @@ static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -645,6 +650,7 @@ static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_PULLDOWN_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -656,6 +662,7 @@ static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -667,6 +674,7 @@ static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -678,6 +686,7 @@ static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
@@ -689,6 +698,7 @@ static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_nu
  * @param hw Peripheral GPIO hardware instance address.
  * @param gpio_num GPIO number
  */
+__attribute__((always_inline))
 static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
 {
    PIN_SLP_OUTPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
--- a/components/hal/gpio_hal.c
+++ b/components/hal/gpio_hal.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */
@@ -7,6 +7,7 @@
 // The HAL layer for GPIO (common part)

 #include "soc/soc.h"
+#include "esp_attr.h"
 #include "soc/gpio_periph.h"
 #include "hal/gpio_hal.h"

@@ -44,3 +45,12 @@ void gpio_hal_hysteresis_soft_enable(gpio_hal_context_t *hal, uint32_t gpio_num,
    }
 }
 #endif //SOC_GPIO_SUPPORT_PIN_HYS_FILTER
+
+void gpio_hal_isolate_in_sleep(gpio_hal_context_t *hal, uint32_t gpio_num)
+{
+    gpio_ll_sleep_input_disable(hal->dev, gpio_num);
+    gpio_ll_sleep_output_disable(hal->dev, gpio_num);
+    gpio_ll_sleep_pullup_dis(hal->dev, gpio_num);
+    gpio_ll_sleep_pulldown_dis(hal->dev, gpio_num);
+    gpio_ll_sleep_sel_en(hal->dev, gpio_num);
+}
--- a/components/hal/include/hal/gpio_hal.h
+++ b/components/hal/include/hal/gpio_hal.h
@@ -545,6 +545,15 @@ void gpio_hal_hysteresis_soft_enable(gpio_hal_context_t *hal, uint32_t gpio_num,
 #endif
 #endif  // SOC_GPIO_SUPPORT_PIN_HYS_FILTER

+/**
+ * @brief Helper function to disconnect internal circuits from an GPIO in sleep mode.
+ *        This function disables input, output, pullup, pulldown for an GPIO in sleep mode.
+ *
+ * @param hal Context of the HAL layer
+ * @param gpio_num GPIO number
+ */
+void gpio_hal_isolate_in_sleep(gpio_hal_context_t *hal, uint32_t gpio_num);
+
 #ifdef __cplusplus
 }
 #endif
--- a/components/hal/linker.lf
+++ b/components/hal/linker.lf
@@ -24,3 +24,5 @@ entries:
        spi_flash_hal_gpspi (noflash)
    if SOC_PMU_SUPPORTED = y:
        pmu_hal (noflash)
+    if SOC_GPIO_PORT != 0:
+        gpio_hal: gpio_hal_isolate_in_sleep (noflash)