* Refactor cached ZHA channel reads.
If doing a cached ZCL attribute read, do "only_from_cache" read for
battery operated devices only. Mains operated devices will do a network
read in case of a cache miss.
* Use cached attributes for ZHA electrical measurement
* Bump up ZHA zigpy dependency.
Most of the the template platforms would check for
extract_entities failing to extract entities and avoid
setting up a state change listner for MATCH_ALL after
extract_entities had warned that it could not extract
the entities and updates would need to be done manually.
This protection has been extended to all template platforms.
Alter the behavior of extract_entities to return the
successfully extracted entities if one or more templates
fail extraction instead of returning MATCH_ALL
async_track_state_change_event is faster than async_track_state_change
and since we do not care about the data being returned to the callback
this is a simple speedup
async_track_state_change_event is faster than async_track_state_change
and since we do not care about the data being returned to the callback
this is a simple speedup
* Switch async_track_state_change to the faster async_track_state_change_event part 4
Calling async_track_state_change_event directly is faster than async_track_state_change (see #37251) since async_track_state_change is a wrapper around async_track_state_change_event now
* pylint
Calling async_track_state_change_event directly is faster than async_track_state_change (see #37251) since async_track_state_change is a wrapper around async_track_state_change_event now
Calling async_track_state_change_event directly is faster than async_track_state_change (see #37251) since async_track_state_change is a wrapper around async_track_state_change_event now
Previously, the media_content_id field would contain the track name, which
appears was a regression when the Spotify integration was rewritten in
7e4b9adc. The media_content_id now reverts to containing the Spotify
track 'uri' field, which has the form 'spotify:track:...'
* Support multiple MQTT availability topics
* Make availability list and availability_topic exclusive
* Make availability list and availability_topic exclusive
* Add missing abbreviation
* Switch to config flow setup
* Add minimal test for config flow
* Add myself as codeowner and address some review concerns
* Address some further review comments
* Created a binary sensor and corrected some review comments.
* Updated the poolsense class and its interface to handle credentials better
* Moved the client session to the PoolSense class.
* Apply suggestions from code review
* Update binary_sensor.py
* Update homeassistant/components/poolsense/__init__.py
* Update sensor.py
* Update binary_sensor.py
* Removed unnecessary class variable
* Correcting a merge error.
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Switch to integration level config
* Switch to per device config rather than per entity type
* All roller shutters should be added as covers
(there are non lighting types)
* Fixup tests that used invalid packets for platforms
* Avoid variable re-use
* Allow control events on sensors too
That way we get signal level sensors for these too
* Lint correction
* Don't filter sensors from config
Disable sensors from GUI if the entities are not wanted
* Correct usage of ATTR_ instead of CONF_
* Make sure the logging when a new entity is added includes the event
* Introduce Bond Hub concept
* Read Hub version information when setting up entry
* Link entities to Hub using via_device
* Add test to verify created Hub device properties
* Created a binary sensor and corrected some review comments.
* Updated the poolsense class and its interface to handle credentials better
* Moved the client session to the PoolSense class.
* Apply suggestions from code review
* Update binary_sensor.py
* Update homeassistant/components/poolsense/__init__.py
* Update sensor.py
* Update binary_sensor.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Refactor Bond integration to remove duplication in Entity code and unit tests
* Refactor Bond integration to remove duplication in Entity code and unit tests (PR feedback)
* Support Fan domain in Bond integration
* Support Fan domain in Bond integration
* Support Fan domain in Bond integration (apply PR feedback)
* Support Fan domain in Bond integration (apply PR feedback)
* Use the shared zeroconf instance for homekit_controller
* bump version
* Update for upstream changes. Thank you @Jc2k !
* naming
* bump version
* empty commit to reset CI as re-run is not working
* Re-add remote file support for Slack
* More work
* Ensure Slack can only upload files from whitelisted directories
* Cleanup
* Finish work
* Code review
* Messing around
* Final cleanup
* Add comment explaining why we use aiohttp for remote files
* Typo
* Declare Bond covers as having assumed state, setup local polling for state updates
* Declare Bond covers as having assumed state, setup local polling for state updates (apply feedback from PR review)
* Declare Bond covers as having assumed state, setup local polling for state updates (apply feedback from PR review)
* Declare Bond covers as having assumed state, setup local polling for state updates (apply feedback from PR review)
* Update type_cameras.py
* Apply suggestions from code review
Support both 24kHz and 16kHz sample rate
Co-authored-by: J. Nick Koston <nick@koston.org>
* Adjust formatting
* Reformat
Co-authored-by: J. Nick Koston <nick@koston.org>
* Detect lingering threads after tests
* Make sure cast is setup before checking state
* Make sure we ask executors of old hass to shutdown
We are not waiting here, just hoping for the best
* Make sure all instances of hass and executors is stopped.
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Also apply hass stopping to scripts
* Adjust to changes how we set up executor
* Add new CoreState.stopped
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
This way _handle_event can contain things available
when entity has been added to home assistant,
and _apply event can remain internal and used on init.
* Add public weather sensors back in
* Remove stale code
* Cleanup after before adding entities
* Fix pylint complaint
* Add test for options flow
* Change mode to listbox
* Update .coveragerc
* Address comments
* Don't process empty list
* Address comment
* Fix mistake
* Make signal unique
* Make string more unique
* Fix merge conflict
* First step of an EnOcean integration refactoring, including code reorganisation and support of a setup config flow
* Moved title to root of strings file
* Fixed pre-commit checks failures
* Fixed linter errors
* Updated formatted string format in logs
* Removed leftover comment
* Multiple changes after PR change requests.
Using an import flow for yaml config, removed unnecessary logs, added proper unload in __init__ and EnOceanDongle
Replaced config state machine by several flows.
Serial port validity check done in the EnOceanDongle class asynchronously, removed unique ID from config flow
Multiple cosmetic changes
* Multiple changes after PR change requests
* Added variable to store default value, as setdefault was caught returning None when the empty dict literal was passed as an argument
* Literal used directly
* Added tests for EnOcean config flows, changed static methods to bundle methods for bundle
* Updated variable name
* Added missing mock to test, replaced repeated magic strings by constants
* Changed imports to avoid an unused import warning from pylint on DOMAIN
* Adding pylint exception for unused import
* Added proper propagation of setup and unload to platforms, removed dead code, some syntax changes
* Removed setup_entry forwarding as the entities can only be configured using yaml
* Removed forwarding of unload
* Enabled code coverage for config flow only
* Clean up coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* make ip check hostname aware
* add executor job for sync function doing IO and remove errant comma
* revert change to update new_data explicitly for options keys since it is already done later
* empty commit to retrigger CI
* Add support for set_config_parameter service
* Adjusted elif to if
* More if/else cleanup
* More if/else cleanup
* Less nesting
* End loop properly
* Added byte type
* Convert break to return
* fix presets and mode conversion
* fix mapping issues in ozw climate
* build mapping table in advance
* Copying a dict to a list copies the keys by default
* Switch what is used for device identifier
type_string can be changed if new device types are added based
on same driver.
* No need to slugify unique id
* Make devices and activities visibile as harmony attributes
* Allow restoring previous activity, add tests
* fix test
* Kill activity_notify with fire
* remove trailing ,
The icon for Withings sleep sensor was using `mdi:bed` (which is correct for MDI v5.0.45 and later). However Home Assistant still uses an older version of Material Design Icons (4.9.95), so this `mdi:bed` icon was not displaying at all. It should be`mdi:hotel` instead, which you can see here: https://cdn.materialdesignicons.com/4.9.95/
- Bumps bravia-tv lib to 1.0.6 which fixes is_connected() to actually
return True only when API is connected, instead of just returning whether
or not cookies are cached (regardless if they actually worked).
- Wrap is_connected() because it now performs io.
- Remove unnecessary logic to refresh cookies. Now that
is_connected() works, the bravia instance only needs to be
reconnected when is_connected is False and TV is not off.
* Move logbook continuous domain filtering to sql
sensors tend to generate a significant amount of states
that are filtered out by logbook. In testing 75% of
states can be filtered away in sql to avoid the
sqlalchemy ORM overhead of creating objects that will
be discarded.
* remove un-needed nesting
* Switch homekit to use async_track_state_change_event
Calling async_track_state_change_event directly
is faster than async_track_state_change and has
slightly lower latency triggering state updates
in homekit
* check for deleted entities
* Update additional tests for linked sensor removals
* Ensure removing entities does not result in an exception
* Cleanup async_track_state_change and augment docstrings.
Skip from_state and to_state matching in
async_track_state_change when they are None
Optimize the state change listener for the most
common use case: no to_state and from_state
matching.
* Update benchmark to be more realistic (previously we assumed only one entity was present in the whole instance)
* Add more tests to ensure behavior is preserved
* Ensure new behavior matches test
* remove MATCH_ALL from zone automation since its the default anyways
* Might as well use async_track_state_change_event instead since MATCH_ALL is removed
* Switch to dispatcher
* Adjust tests for dispatcher
* Store device in sensor
* Move state application into binary sensor entity class
* Move more specifics into per platform classes
* Should not apply event in init of sensor
* Switch to call_later
* Make apply_event public
* No point in slugifying debug logs
* Adjust error in off delay and event
* Make sure we match with masked id
* Migrate Guardian to use the DataUpdateCoordinator
* Finish work
* Cleanup
* Don't use UpdateFailed error
* Code cleanup
* Code cleanup
* Remove unnecessary change
* Code review
* Code review
* Use a subclass of DataUpdateCoordinator
* Make sure to pop client upon unload
* Adjust coverage
* Switch tests to use hass objects instead of direct
* Make sure sensor update state
* Add some initial binary sensor tests
* Add initial binary sensor tests
* Add tests for pt2262
* Add test for off delay
Calling async_track_state_change_event directly
is faster than async_track_state_change (see #37251) and has
slightly lower latency triggering state updates
* Convert Android TV integration to async
* pylint
* Remove unused test code
* Require async versions of androidtv and adb-shell
* Cleanup
* Remove commented out code
* Use constants SHELL_RESPONSE_OFF and SHELL_RESPONSE_STANDBY
* Prebake common history queries
The python overhead of to construct
the queries exceeded the database overhead. We now
prebake the queries that get frequently polled.
This reduces the time it takes to update history_stats
sensors and can make quite a difference if there
are a lot of them.
When using the mini-graph-card card, all the entities
on the card being graphed are queried every few seconds
for new states. Previously this would tie up the database if there
are lot of these graphs in the UI.
* Update homeassistant/components/history/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/history/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* cache entity_filter in the lambda
* switch to yield
* Revert "switch to yield"
This reverts commit f8386f494002178729b67b54dd299affd406f2f2.
* get_states always returns a list
* query wasnt actually reusable so revert part of the breakout
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add NetdataAlarms alarm sensor to additionally collect alarm information from the netdata host
* Incorporate suggested changes by @MartinHjelmare
* Change from pictures to icons
* Simplify API callbacks following home-assistant-ecosystem/python-netdata/pull/5 and home-assistant-ecosystem/python-netdata/pull/6
* Bring back lost empty line
* Update the library version in manifest.json
* Update the library version in requirements_all.txt
* Linting
* Linting
* Fix typo
* Do not count cleared and undefined alarms as warnings
* Do not count cleared, undefined and uninitialized alarms as warnings
- Bumps bravia-tv lib to 1.0.6 which fixes is_connected() to actually
return True only when API is connected, instead of just returning whether
or not cookies are cached (regardless if they actually worked).
- Wrap is_connected() because it now performs io.
- Remove unnecessary logic to refresh cookies. Now that
is_connected() works, the bravia instance only needs to be
reconnected when is_connected is False and TV is not off.
The icon for Withings sleep sensor was using `mdi:bed` (which is correct for MDI v5.0.45 and later). However Home Assistant still uses an older version of Material Design Icons (4.9.95), so this `mdi:bed` icon was not displaying at all. It should be`mdi:hotel` instead, which you can see here: https://cdn.materialdesignicons.com/4.9.95/
* GitHub Actions: Add yamllint problem matcher
* Introduce YAML issue to test problem matcher
* Revert "Introduce YAML issue to test problem matcher"
This reverts commit fa88c9484efc8f979fe2e3aed2f964381e319a56.
* GitHub Actions: Add check executables problem matcher
* Create a problem for testing
* Revert "Create a problem for testing"
This reverts commit 3532b3777f0100316b154d334b513fe4cd62ce25.
* GitHub Actions: Add pylint problem matcher
* Create a pylint issue to test
* Create another pylint issue to test
* Register problem matcher in same step
* Apply possible workaround
* Disable problem matcher to catch raw output
* Trying again with new CI containers
* Extend problem matcher with errors and warnings
* Improve matching, keep error code in message
* Revert "Create another pylint issue to test"
This reverts commit a90e23656eaddd4f1c2995572cc39a0d41022a5f.
* Revert "Create a pylint issue to test"
This reverts commit 9dd5148eb4ef74c3261144426d1b0b0f337cb3e5.
* Fix stable name in job description
* GitHub Actions: Add json problem matcher
* Create a problem for testing
* Revert "Create a problem for testing"
This reverts commit d7735e4af39a18cb8d080bfc01e483065bbd06b6.
* GitHub Actions: Add codespell problem matcher
* Add some spelling issues for test
* Disable color, might throw off matcher
* Revert "Add some spelling issues for test"
This reverts commit 3afb59c8d9c4080621fc90d25d228fa308b80a4b.
* Support multiple MQTT availability topics
* Make availability list and availability_topic exclusive
* Make availability list and availability_topic exclusive
* Add missing abbreviation
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
remove now unused import
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
import Mock from tests.async_mock as suggested
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
remove now unused import
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* fix unit tests that were failing after suggested changes
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Rework and re-enable rfxtrx tests
* Add missed change to _signal_event
* Fixup the dummy serial that causes max cpu
* Make sure we cleanup thread here too
* Make sure we always wait for tasks before we check state
* Some more places we need to wait before checking
* Improve unifi device tracker performance
The unifi websocket sends an update every second
which generates a significant amount of state
changed updates.
Avoid creating callback functions when they
are not going to be used.
* make _no_heartbeat/_make_disconnected instance methods
* remove extra empty line
* revert is_wired change
* remove extra line
* Add humidifier support to homekit
* spell
* dependencies
* lint
* add linked humidity sensor for humidifiers
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* apply suggestions from code review
* pylint
* Fix tests
* Update homeassistant/components/homekit/type_humidifiers.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/homekit/test_homekit.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* apply suggestions from code review
* lint
* pylint
* push
* test for unavailable linker sensor
* black
* valid values key case
* black
* Update homeassistant/components/homekit/type_humidifiers.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* black
* coverage
* Set current humidity to 0 if linked sensor removed or unavailable
* use last known humidity instead
Co-authored-by: J. Nick Koston <nick@koston.org>
* Initial commit for Dexcom integration
* Dexcom config flow testing
* Clarify errors during setup
* Resolve minor test issues
* Update sensor availability, resolve linting issues
* Add sensor tests
* Remove title due to 0.109, add abort
* >94.97% codecov/patch
* Move .translations/ to translations/
* Add constants for servers and unit of measurements
* Bump pydexcom version
* Updated domain schema, Dexcom creation
* Support for different units of measurement
* Update tests
* Remove empty items from manifest
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Raise UpdateFailed if fetching new session fails
* Switch everything over to required
* Simplify state information
* Simplify async_on_remove
* Pydexcom package now handles fetching new session
* Only allow config flow
* Remove ternary operator
* Bump version, pydexcom handling session refresh
* Using common strings
* Import from test.async_mock
* Shorten variable names
* Resolve tests after removing yaml support
* Return false if credentials are invalid
* Available seems to handle if data is empty
* Now using option flow, remove handling import
* Add fixture for JSON returned from API
* Overhaul testing
* Revise update options
* Bump pydexcom version
* Combat listener repetition
* Undo update listener using callback
* Change sensor availability to use last_update_success
* Update sensor availability and tests
* Rename test
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add service to support setting timer on water heater component
* Update water_heater.py
Remove info logging
Return if unsupported option used
* Added default temperature as it is optional
* Update homeassistant/components/tado/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/tado/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/tado/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/tado/water_heater.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Fix to remove else statement, and fix lint error
* Reinstate entity id on schema, allow setting with temperature on devices that dont support it
* Remove entity id from schema as not required
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
This effectively fixes an important bug where the graph would go negative because 1.2.0 used the 32-bit counters and 1.3.0 uses 64-bit counters will not realistically go negative any time soon.
Since we now base all of exposure checks on data that
will not change, we can cache the result instead
of calculating it every loop.
This change complements the work done in #32718
* refactoring to share logic and sensor startup error test
* Added handling for V1 InfluxDBServerError to start-up and runtime and test for it
* Added InfluxDBServerError test to sensor setup tests
* Raising PlatformNotReady exception from sensor for setup failure
* Proper testing of PlatformNotReady error
This effectively fixes an important bug where the graph would go negative because 1.2.0 used the 32-bit counters and 1.3.0 uses 64-bit counters will not realistically go negative any time soon.
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (add changed requirements_test_all.txt)
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (bring coverage to 100%)
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (updated patch path as suggested)
* add first unit test to config flow for Plum Lightpad (add unit test for abort)
* Move logbook continuous domain filtering to sql
sensors tend to generate a significant amount of states
that are filtered out by logbook. In testing 75% of
states can be filtered away in sql to avoid the
sqlalchemy ORM overhead of creating objects that will
be discarded.
* remove un-needed nesting
* add support for config flow for Plum Lightpad integration
* add support for config flow for Plum Lightpad integration (remove unintended change to requirements_test_all.txt)
* add support for config flow for Plum Lightpad integration (fix lint issues)
* add support for config flow for Plum Lightpad integration (PR feedback)
* add support for config flow for Plum Lightpad integration (fix lint)
* Update homeassistant/components/plum_lightpad/__init__.py
use debug instead of info for logging
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
switch to use generated references instead of hard-coded strings
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
switch to use references instead of hard-coded string
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
removing translated title per suggestion
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
removing per suggestion
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* remove unnecessary deepcopy
* remove unnecessary logging warning, since ignoring is expected for configuration.yaml scenario
* switch to hass.loop.create_task per PR feedback
* show login errors when configuring integration via UI (PR feedback)
* disable wrongly flag pylint violation
* add except handler to handle connection errors when setting up config flow entry
* address PR feedback regarding exception handling
* Update homeassistant/components/plum_lightpad/config_flow.py
use helper instead of custom code/message-id
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Added GLOB capability to entityfilter and every place that uses it. All existing tests are passing
* added tests for components affected by glob change
* fixed flake8 error
* mocking the correct listener
* mocking correct bus method in azure test
* tests passing in 3.7 and 3.8
* fixed formatting issue from rebase/conflict
* Checking against glob patterns in more performant way
* perf improvments and reverted unnecessarily adjusted tests
* added new benchmark test around filters
* no longer using get with default in entityfilter
* changed filter name and removed logbook from filter benchmark
* simplified benchmark tests from feedback
* fixed apache tests and returned include exclude schemas to normal
* fixed azure event hub tests to properly go through component logic
* fixed azure test and clean up for other tests
* renaming test files to match standard
* merged mqtt statestream test changes with base
* removed dependency on recorder filter schema from history
* fixed recorder tests after merge and a bunch of lint errors
Cleanup indexes as >50% of the db size was indexes,
many of them unused in any current query
Logbook search was having to filter event_types without
an index:
Created ix_events_event_type_time_fired
Dropped ix_events_event_type
States had a redundant keys on composite index:
Dropped ix_states_entity_id
Its unused since we have ix_states_entity_id_last_updated
De-duplicate storage of context in states as
its always stored in events and can be found
by joining the state on the event_id.
Dropped ix_states_context_id
Dropped ix_states_context_parent_id
Dropped ix_states_context_user_id
After schema v9:
STATES............................................ 10186 40.9%
EVENTS............................................ 5502 22.1%
IX_STATES_ENTITY_ID_LAST_UPDATED.................. 2177 8.7%
IX_EVENTS_EVENT_TYPE_TIME_FIRED................... 1910 7.7%
IX_EVENTS_CONTEXT_ID.............................. 1592 6.4%
IX_EVENTS_TIME_FIRED.............................. 1383 5.6%
IX_STATES_LAST_UPDATED............................ 1079 4.3%
IX_STATES_EVENT_ID................................ 375 1.5%
IX_EVENTS_CONTEXT_PARENT_ID....................... 347 1.4%
IX_EVENTS_CONTEXT_USER_ID......................... 346 1.4%
IX_RECORDER_RUNS_START_END........................ 1 0.004%
RECORDER_RUNS..................................... 1 0.004%
SCHEMA_CHANGES.................................... 1 0.004%
SQLITE_MASTER..................................... 1 0.004%
* Changes to be committed:
modified: homeassistant/components/solaredge/const.py
modified: homeassistant/components/solaredge/sensor.py
Solaredge as recently changed its policy about local api access, so solaredge-local doesn't work with last firmware update for almost users.
Please check https://github.com/home-assistant/core.git
Anyway the solardge remote api is still working, but doesn't got some usefull sensor information as Power SelfConsumption, Power Exported, Power Imported.
With my update, I'll fetching API energy details where we got these new sensors.
* Grammar/syntax fix
* Indentation fix
* Black formatting fix
* isort fix
* To force re-check
* Fix too-many-nested-blocks
* Fix indentation
* Fix Black formatting :D
* Fix Redefining built-in var
* Removed comment to force check
* adj
* time_fired_isoformat
* remove unused code
* tests for processing timestamps
* restore missing import lost in merge conflict
* test for None case
* Squeezebox add config flow and player discovery
* Fixes to config flow
* Unavailable player detection and recovery
* Improved error message for auth failure
* Testing for squeezebox config flow
* Import configuration.yaml
* Support for discovery integration
* Internal server discovery
* Fix bug restoring previously detected squeezebox player
* Tests for user and edit steps in config flow
* Tests for import config flow
* Additional config flow tests and fixes
* Linter fixes
* Check that players are found before iterating them
* Remove noisy logger message
* Update requirements_all after rebase
* Use asyncio.Event in discovery task
* Use common keys in strings.json
* Bump pysqueezebox to v0.2.2 for fixed server discovery using python3.7
* Bump pysqueezebox version to v0.2.3
* Don't trap AbortFlow exception
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor validate_input
* Update squeezebox tests
* Build data flow schema using function
* Fix linter error
* Updated en.json
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update .coveragerc for squeezebox config flow test
* Mock TIMEOUT for faster testing
* More schema de-duplication and testing improvements
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Testing and config flow improvements
* Remove unused exceptions
* Remove deprecated logger message
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Implement suggestions from code review
* Add async_unload_entry
* Use MockConfigEntry in squeezebox tests
* Remove unnecessary config schema
* Stop server discovery task when last config entry unloaded
* Improvements to async_unload_entry
* Fix bug in _discovery arguments
* Do not await server discovery in async_setup_entry
* Do not await start server discovery in async_setup
* Do not start server discovery from async_setup_entry until homeassistant running
* Re-detect players when server removed and re-added without restart
* Use entry.entry_id instead of unique_id
* Update unittests to avoid patching homeassistant code
Co-authored-by: J. Nick Koston <nick@koston.org>
* Now supports Hydrawise API v1.4
* Removed dependency and codeowners name.
* Update CODEOWNERS to include hydrawise
* Changes made from review comments.
* Clean up update.
* Added device class for timestamp and switch. Consolodate methods to parent class.
* Cap next_cycle at 2 years to prevent time overflow.
* Addressed review comments.
* Updated DEVICE_MAP and icon() based on review comments.
* Refactor / update Awair integration
This commit does a few things, all in service of making the Awair
integration more modern and reliable. Specifically we do the following:
- Update to python_awair 0.1.1
- Begin using config entries / flow for setting up the integration.
- YAML support is completely removed.
- The integration now allows adding multiple Awair accounts, should a
user wish to do so (I found it _very_ useful in development).
- Group various Awair sensors into devices, using the device registry.
- Renames various sensors and treats the "dust" sensor as a particulate sensor.
- Device update rate-limits are no longer dynamically calculated; the
Awair API now separates rate-limits on a per-device basis.
- Supports sound pressure and illuminance sensors found on some Awair devices.
- We report the "awair index" for certain sensors as part of device_state_attributes.
The "index" is a subjective measure of whether or not a sensor reading
is "good" or "bad" (and to what extent). It's a component of the Awair
score, and it is useful on its own as an input for those who wish to
do things like "display this color if the value is 'bad'".
This is a breaking change, and requires updates to documentation and a
warning in the README. The breaking changes in detail, are:
- Support for all YAML configuration is removed, and users will need to
re-add the integration via the UI.
- We no longer support overriding device discovery via manual
configuration of device UUIDs. This was previously supported because
the Awair API had severe limits on the device list endpoints; however
those have since been removed.
- Gen 1 devices no longer show a "dust" sensor; rather we create a PM2.5
sensor and a PM10 sensor and just keep the values in sync. This better
reflects the sensor capabilities: it can detect particles in a range
from 2.5 -> 10, but cannot differentiate between sizes.
- Sensors are renamed as follows:
- "sensor.devicename_co2" -> "sensor.devicename_carbon_dioxide"
- "sensor.devicename_voc" -> "sensor.devicename_volatile_organic_compounds"
- "sensor.devicename_score" -> "sensor.devicename_air_quality_index"
- I've chosen to call the "Awair Score" an "air quality index" sensor,
because fundamentally the "Awair Score" and other air quality indices
(such as CAQI) do the same thing: they calculate a value based on a
variety of other inputs.
Under the hood, the integration has seen some improvements:
- We use the DataUpdateCoordinator class to handle updates, rather than
rolling our own update class.
- The code no longer tracks availability based on a timestamp returned
from the Awair service; we assert that if we have received a response
and the response has data for our device, then we are available (and
otherwise, not available). We don't need to test the actual Awair API
so heavily.
- Test coverage has been expanded to handle a variety of products that
Awair produces, not just the one I happen to own.
- Test coverage no longer concerns itself with testing behavior that is
now handled by the DataUpdateCoordinator; nor is it concerned with
ensuring that the overall component sets up and registers properly.
These are assumed to be well-tested functionaity of the core and not
things we need to re-test ourselves.
Finally - between library updates and integration updates, this
integration is well-positioned to support future updates. I have a
proof-of-concept patch for device automations, and the underlying
library now supports subclassing authentication (which clears the way
for us to use OAuth authentication for Awair).
* Wrap test fixture in mock_coro
Truthfully I'm not sure why this was passing on my local dev
environment, but I was developing with python 3.8 before. After
installing python 3.7, I was able to reproduce the CI failures and fix
them.
* Fix broken tests after #34901 and/or #34989
* Do not rename sensors so broadly
We're going to keep the sensors named as they were before, pending the
outcome of any decisions around the air_quality component and what names
should be standardized for air-quality-like devices.
If standardized names are selected (which does seem likely), then we
will update this integration to match them - at which point, it would be
a breaking change.
But for now, we'll keep names mostly identical to what users had before.
Notable in this commit is that we generate the entity_id ourselves,
rather than just allowing it to be auto-generated from the name
attribute. This allows us to provide more human friendly names, while
keeping the old format for entity ids. For example, given an Awair
device called "Living Room", we'll generate an entity id of
"sensor.living_room_voc" but show set the name of the device to "Living
Room Volatile organic compounds".
* Support import from config.yaml
We'll create a config entry from config.yaml the first time we're
loaded, and then defer to it from then on.
We ignore all keys other than the access_token, since we no longer need
to deal with per-account rate-limits (rather, everything is per-device
now).
* Add myself to CODEOWNERS
Since I wrote the initial integration, and now this re-write, it feels
appropriate for me to take care of the integration along with `danielsjf`.
* Remove name mangling
* Update homeassistant/components/awair/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Address some review feedback
* Set up reauth flow in a job, rather than awaiting
* Remove unnecessary title string
* Remove unnecessary config schema checking
As pointed out in review, because this comes in via import from
`configuration.yaml`, we can rely on the `PLATFORM_SCHEMA` validation instead.
* Fix tests
* Set unique_id appropriately for legacy devices
For users who have had this integration already installed (and who have
updated their home assistant installation sometime in recent history),
we want to ensure that unique_id's are set to the same thing as before,
to facilitate the upgrade process.
To do that, we add an additional property to the `SENSOR_TYPES` dict
(`ATTR_UNIQUE_ID`) which allows us to map modern sensor names from
python_awair to what older versions called them - ie: `humidity` ->
`HUMID`. We then use that value when constructing the unique ID. This
should allow users to upgrade and not lose configuration even if entity
IDs would otherwise change (because we have changed the name format that
generates entity IDs).
One note is that for the gen1 `DUST` sensor, we have to treat it
differently. This integration used to call that a "PM2.5" sensor, but
the unique_id generated would be something like `awair_12345_DUST`. So
we special-case that sensor, and do the same thing. We do not need to
special-case the PM10 sensor for gen1 devices, because we didn't create
a PM10 sensor in the past (we do now, because the "DUST" sensor is
really a hybrid PM2.5/PM10 sensor).
* Patch async_setup_entry for two tests
* Update awair config_flow to require / use an email address for unique_id
Also, only start one re-auth flow.
* Add a few more tests, try to get coverage up.
* Add another test
* Move attribution to device_state_attributes
* Don't require email
* Switch from Union[dict, None] to Optional[dict]
* Use a mock where requested
* Fix missing constant rename
* Use async_create_task
* Bump test coverage a bit for config_flow
* s/CONF_UNIQUE_ID/UNIQUE_ID/g
* Add warning about deprecated platform config
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Prefilter more logbook events in sql
Prefilter sensor events in _keep_event before humanify
Cache static attribute lookup
Reduces logbook execution time by ~35%
* fix mocking in benchmark
* Update tests for logbook users
* Adding PM2.5 and PM2.5 24hr Average
* Corrected unit to const.py CONCENTRATION_MICROGRAMS_PER_CUBIC_METER
* Imported CONCENTRATION_MICROGRAMS_PER_CUBIC_METER for PM2.5 units
* Fixed code formatting with `black`
* TTS seems unsupported on heos media player #32862
TTS seems unsupported on heos media player #32862
The type media_type music which is required by TTS was not covered.
* Update homeassistant/components/heos/media_player.py
Co-authored-by: Andrew Sayre <6730289+andrewsayre@users.noreply.github.com>
* Update to test_media_player.py
Test for TTS support to Heos #35386
* Update test
Add TTS support to Heos #35386
* Update to test_play_media_music
assert set to "Unable to play music: Failure (1)" seems to cause an issue.
* test_play_media_music
syntax
Co-authored-by: Andrew Sayre <6730289+andrewsayre@users.noreply.github.com>
* Allow activity change on start of switch
Allow activity to be updated when a switch to a new activity is initiated instead of when it is completed.
* Updates based on feedback
Some items are not required to be done as YAML is not used anymore.
Cleaned-up some code.
* Fix for change on how to set callbacks
How callbacks are set now one has to set the new_activity and new_activity_starting as well, even just with None.
* Added callback update
Added so that when it is changed in the UI the callbacks will be changed as well.
* Added test cases for notify setting
Added test cases for config flow to test new setting for activity notifications.
* Add discovery to NUT integration
* implement async_step_zeroconf
* Update test to make sure unique id not set
* Remove host/port import when coming from discovery, add title placeholders
* fix mis-paste
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add expiration timestamp to cert_expiry sensors
* Clear timestamp if cert becomes invalid
* Use timezone-aware timestamps
* Use DataUpdateCoordinator, split timestamp to separate sensor
* Use UTC, simpler add/remove handling
* Review fixes
* Fix incomplete mock that fails in 3.8
* Use static timestamps, improve helper method name
* Add old_state_id to states, remove old/new state data from events since it can now be found by a join
* remove state lookup on restart
* Ensure old_state is set for exisitng states
* Add precipitation probability attribute
* bump env_canada version to 0.0.38 in manifest
* bump env_canada version to 0.0.38 in requirements
* Add support for percipiation probability
* formated project with black
* make sure prob is an int
* fix build break
* update usage to correct naming
* revert bad change and apply fix build break
* add tests
* Only process logbook timestamps for events we will keep
Since we group by minute we were previously processing
every timestamp. We can avoid this by making all the
minute checks use the unprocessed datetime since
the groupings will be the same regardless of timezone.
This reduces the number of datetime object recreations
by at least an order of magnitude.
This builds on #35822
Minimize the amount of data selected from
the database
Testing:
History API Response time for 1 day
Average of 10 runs with minimal_response
Before: 9.47s
After: 4.43s
* Add sensor platform for vicare (heatpump)
* Formatting and fixes
* Formatting and fixes 2
* Fixes and formatting 3
* Fixes and formatting 4
* Add binary_sensor and more sensors
This moves some more climate attributes to sensors and adds
binary_sensors
* Move ActiveError back to climate component
The data returned by ActiveError is more complex.
It takes further investigation on how to interpret it a s a binary sensor.
Therefore it is moved back as an attribute of the climate component
* Update PyViCare library
* PR changes
* PR changes 2
Co-authored-by: Hans Oischinger <hans.oischinger@gmail.com>
* Vera now polls for all status data, no only incremental.
Vera polling is not handled using hass event loops with proper backoffs.
* Using long polling.
* Addressing PR feedback.
* Addressing PR feedback.
Adding controller stop on config unload.
Since zigpy change to support bitmap classes, formatting string was incorrectly generated for the newly joined devices with SmartEnergy metering clusters.
Since zigpy change to support bitmap classes, formatting string was incorrectly generated for the newly joined devices with SmartEnergy metering clusters.
* add ip to discovery title of xiaomi miio gateway
* add flow title to identify multiple gateways by IP
* clearify gateway token
* black formatting
* grammer improvements
Co-authored-by: Franck Nijhof <git@frenck.dev>
* grammer improvements
Co-authored-by: Franck Nijhof <git@frenck.dev>
Co-authored-by: Franck Nijhof <git@frenck.dev>
* add ip to discovery title of xiaomi miio gateway
* add flow title to identify multiple gateways by IP
* clearify gateway token
* black formatting
* grammer improvements
Co-authored-by: Franck Nijhof <git@frenck.dev>
* grammer improvements
Co-authored-by: Franck Nijhof <git@frenck.dev>
Co-authored-by: Franck Nijhof <git@frenck.dev>
* Add playbase as a model
* Sonos queue
* Match counting of the queue with service play_queue
* Add service remove_from_queue
* Change description of remove_from_queue
* Use ATTR_QUEUE_POSITION instead of ATTR_CURRENT_QUEUE_POSITION
* Removed queue and show queue_position only when playing local
* Add property queue_position
* Return None instead of -1
* Change docstring from -1 to None
* Update ZHA config flow Zigbee radio description
Update ZHA config flow Zigbee radio descriptions to match docs https://github.com/home-assistant/home-assistant.io/pull/13437
* Make protocol plus model names more readable for end-users
* Update homeassistant/components/zha/core/const.py
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Update homeassistant/components/zha/core/const.py
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Update homeassistant/components/zha/core/const.py
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Zigbee radio description simplified and examples listed in alphabetical order
* Fix exceptions.Unauthorized.permission type
* Use auth.permission consts more
* Auth typing improvements
* Helpers typing improvements
* Calculate self.state only once
* initial commit
* small corrections
* fix linting error
* add new files to coveragerc
* rename devolo_sensor to devolo_device
* use correct import
* use binary_switch platform
* use binary_switch platform
* add binary_sensor to coverage
* adjustments according PR review
* make super call easier to read
* use f-string instead of concatenating
* update docstrings - remove device_id property
* add will_remove_from_hass
* changed back to check for class in DEVICE_CLASSES
* created a flow that would go through everything as it was blocking the commit
and the cv rules prevent an input that would get to that flow
* moved DEFAULT_COVER_CLASS from const to cover
* Remove period from logging messages
* Save indentation using guard clauses
* Typo
* Walk other files
* Rewalk all files
* Not cleanup, but adding indicatd missing measurements
* Revert new sensors
* Bump python-synology to 0.8.2
* state_attributes to device_state_attributes
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add support for showing text on Keba EV chargers
* Changed implementation to use the notify interface
* Removed stale references to set_text
* Clean up
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add config_flow to the dunehd integration
* Add tests
* Run gen_requirements_all
* Fix pylint error
* Better hostname validation
* Build device info in the class
* Allow configuration to specify a host name.
This will default to "synology", so the sensors would be named
sensor.synology_... which is the original implementation.
By specifying a name, which is required for multiple synology hosts,
you can then have sensor.hostA_... and sensor.hostB_...
* Get the base name for the sensors from the Synology DSM hostname
* Don't need the name for the config
* Added missing import
* Fixed another typo
* Removed definition of unused BASE_NAME
* Removed end of line to revert
* Moved for ordering
* add non-root container user
* fix dockerfile and homeassistant editable install
* just install in home directory
* less impactful default changes
* separate RUN for better layer caching
* use vscode-remote base image
* Fix SP2-CL (0x7544) sensor update
This device does not support get_energy(). We need to ignore the CommandNotSupportedError in the update method.
* Format with Black
* Only wrap code that throws with catch
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Sort the players_list attribute of the minecraft_server players_online sensor in order to eliminate uneccessary state updates and ease comparisons in state changes.
* Remove zeroconf options from homekit
homekit uses the system shared zeroconf instance which
made the interface choice option controlled by the
zeroconf integration setting.
* change to cv.deprecated
* adj
* fix remaining tests from original merge conflict
* remove invalidation_version
* Part 1 of 2 (no breaking changes in part 1).
When integrations configured via the UI block startup or fail to start,
the webserver can remain offline which make it is impossible
to recover without manually changing files in
.storage since the UI is not available.
This change is the foundation that part 2 will build on
and enable a listener to start the webserver when the frontend
is finished loading.
Frontend Changes (home-assistant/frontend#6068)
* Part 1 of 2 (no breaking changes in part 1).
When integrations configured via the UI block startup or fail to start,
the webserver can remain offline which make it is impossible
to recover without manually changing files in
.storage since the UI is not available.
This change is the foundation that part 2 will build on
and enable a listener to start the webserver when the frontend
is finished loading.
Frontend Changes (home-assistant/frontend#6068)
* Part 2 of 2 (breaking changes in part 2).
When integrations configured via the UI block startup or fail to start,
the webserver can remain offline which make it is impossible
to recover without manually changing files in
.storage since the UI is not available.
This change is the foundation that part 2 will build on
and enable a listener to start the webserver when the frontend
is finished loading.
* bump timeout to 1800s, adjust comment
* bump timeout to 1800s, adjust comment
* bump timeout to 4h
* bump timeout to 4h
* remove timeout failsafe
* remove timeout failsafe
* and the test
* and the test
* find the test that needs mocking
* find the test that needs mocking
* Revert "find the test that needs mocking"
This reverts commit 064e7787a8e9bc65df965530726fa1c41f8bcd36.
* Revert "find the test that needs mocking"
This reverts commit 064e7787a8e9bc65df965530726fa1c41f8bcd36.
* fix the one that was missed due to the conflict
* Add switch component
* Update homeassistant/components/plugwise/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Improvements by @bdraco
Co-authored-by: J. Nick Koston <nick@koston.org>
* Stable device id when a deleted device is restored.
* Tweak
* Store only basic data for deleted devices
* Simplify code
* Simplify code
* Address review comments.
* Improve test
* Fix missing save
* Part 1 of 2 (no breaking changes in part 1).
When integrations configured via the UI block startup or fail to start,
the webserver can remain offline which make it is impossible
to recover without manually changing files in
.storage since the UI is not available.
This change is the foundation that part 2 will build on
and enable a listener to start the webserver when the frontend
is finished loading.
Frontend Changes (home-assistant/frontend#6068)
* Address review comments
* bump timeout to 1800s, adjust comment
* bump timeout to 4h
* remove timeout failsafe
* and the test
- add Synology DSM Security binary sensor (enabled by default)
- use device name instead of id in names
- add device type to name
- show disk manufacturer, model and firmware version in devices
- some entries are disabled by default (`entity_registry_enabled_default`)
- binary sensor + sensor uses `device_class` when possible
- do not fetch a concerned API if all entries of it are disabled
- entity unique_id now uses key instead of label
- entity entity_id changes for disk and volume: example from `sensor.synology_status_sda` to `sensor.synology_drive_1_status`, or from `sensor.synology_average_disk_temp_volume_1` to `sensor.synology_volume_1_average_disk_temp`
- now binary sensor:
- disk_exceed_bad_sector_thr
- disk_below_remain_life_thr
- removed sensor:
- volume type (RAID, SHR ...)
- disk name (Drive [X])
- disk device (/dev/sd[Y])
* Re-add connections to device_info
* Fix typo in identifiers
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Support stream profile and configuring it through options flow
* Options flow test
* Allow configuration of not using a stream profile
* Shorten default stream profile string
The OpenCV image_processing component accepts a `min_size` argument in
each classifier that is then passed into the OpenCV library. The
`min_size` argument is expected to be a tuple of 2 ints, and is entered
into the platofrm schema as such. However, yaml will always produce a
list instead of a tuple, which means in practice it's impossible to use
the `min_size` argument. This changes the schema to accepts any sequence
of 2 ints that is then coerced into a tuple suitable for passing to the
OpenCV library.
* Improve configuration
* Read new properties for basic device information
Improve tests by mocking less improving stability of tests
* Clean up in device tests
* Support new port management api
* Improve initializing data
* Bump dependency to v28
It is not correct to show warning about "unexpected event type" if EVENT_STATE_CHANGED have no new_state field.
We should show this warning only if it is real unexpected event type.
Run task_done() before continue, because we should tell the queue that the processing on the task is complete
after get().
* Use CONF_CLIENT_ID & CONF_CLIENT_SECRET from homeassistant.const
* Fix pylint
* Use in tests
* Search for "client_id"
* Fix tests
* Fix test
* Fix test
* Periodicly log when intergrations are taking a while to setup
When one or more intergrations are taking a while to setup
it is hard to determine which one is the cause. We can
help narrow this down for the user with a periodic log
message about which domains are still waiting to be setup
every 30s.
* 30 -> 60 per discussion
* only log when the integration is actually doing setup
* reduce, fix race in test
* Requires 0.7.18 of elkm1 library to decode LD messages, and uses those messages to reliably set the arming/disarming user when there are more than one area. See https://github.com/home-assistant/core/issues/35310.
* Fixed typo
* Fixed off by one error -- LD command reports 1-based user-numbers which is the changed_by_id we want, but we need 0-based indices as argument to username.
* Bump required version of elkm1, remove logging message I was using for testing; prepping for PR.
* Black formatted
* Fixed bug whereby I needed to ref elements when running against released build of elkm1-lib
* Update plugwise async, config_flow and multi entity
* Update battery percentage
* Fix yamllint on services
* Fix yamllint on services
* Fix formatting for pyupgrade
* Update homeassistant/components/plugwise/__init__.py
Co-Authored-By: Robert Svensson <Kane610@users.noreply.github.com>
* Add try/except on setup
* Bump module version, battery version and valve position
* Removing sensor, switch, water_heater for later (child) PRs
* Catchup and version bump
* Remove title from strings.json
* Readd already reviewd await try/except
* Readd already reviewed config_flow
* Fix pylint
* Fix per 0.109 translations
* Remove unused import from merge
* Update plugwise async, config_flow and multi entity
* Update battery percentage
* Fix yamllint on services
* Fix yamllint on services
* Bump module version
* Bump module version, battery version and valve position
* Removing sensor, switch, water_heater for later (child) PRs
* Catchup and version bump
* Remove title from strings.json
* Fix pylint
* Fix per 0.109 translations
* Translations and config_flow, module version bump with required changes
* Translations and config_flow, module version bump with required changes
* Fix requirements
* Fix requirements
* Fix pylint
* Fix pylint
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Include configentrynotready on import
* Update __init__.py
* DataUpdateCoordinator and comment non-PR-platforms
* Fix reqs
* Rename devices variable in favor of entities
* Rework updates with DataUpdateCoordinator
* Peer review
* Peer review second part
* Cleanup comments and redundant code
* Added required config_flow test
* Peer review third part
* Update service was replaced by DataUpdateCoordinator
* Corrected testing, version bump for InvalidAuth, move uniq_id
* Remove according to review
* Await connect (py38)
* Remove unneccesary code
* Show only when multiple
* Improve config_flow, rename consts
* Update homeassistant/components/plugwise/climate.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/climate.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Process review comments
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add support for Insteon 2444-222 Micro Open/Close Module
* Avoid breaking changes on cover
* Update homeassistant/components/isy994/cover.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Proceed with startup if an integration setup blocks for more than 30m
* Fix test location
* Fix log call
* naming
* revert
* do not shield from cancelation
* Adjust test since we now cancel when we hit the timeout
* added optional argument to command service
* Fixed crash when optional argument is not provided
* Updated argument description
* fixed lint error
* Fix isort error
* switched to use dict for optional field instead of json string
* switched to use ATTR_PAYLOAD
* fixed test
* actually fixed test
* Improve history api performance
A new option "minimal_response" reduces the amount of data
sent between the first and last history states to only the
"last_changed" and "state" fields.
Calling to_native is now avoided where possible and only
done at the end for rows that will be returned in the response.
When sending the `minimal_response` option, the history
api now returns a json response similar to the following
for an entity
Testing:
History API Response time for 1 day
Average of 10 runs with minimal_response
Before: 19.89s. (content length : 3427428)
After: 8.44s (content length: 592199)
```
[{
"attributes": {--TRUNCATED--},
"context": {--TRUNCATED--},
"entity_id": "binary_sensor.powerwall_status",
"last_changed": "2020-05-18T23:20:03.213000+00:00",
"last_updated": "2020-05-18T23:20:03.213000+00:00",
"state": "on"
},
...
{
"last_changed": "2020-05-19T00:41:08Z",
"state": "unavailable"
},
...
{
"attributes": {--TRUNCATED--},
"context": {--TRUNCATED--},
"entity_id": "binary_sensor.powerwall_status",
"last_changed": "2020-05-19T00:42:08.069698+00:00",
"last_updated": "2020-05-19T00:42:08.069698+00:00",
"state": "on"
}]
```
* Remove impossible state check
* Remove another impossible state check
* Update homeassistant/components/history/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Reorder to save some indent per review
* Make query response make sense with to_native=False
* Update test for 00:00 to Z change
* Update homeassistant/components/recorder/models.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add fan platform
* Add fan discovery schema
* Use constants for dispatcher signal
* Move fan platform to ozw
* Fix fan discovery schema
* Add previous speed to handle value 255
* Make fixture reading more robust
* Add fan tests
* Remove not needed fixture info
* Validate speed
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Decouple media lookup from play_media service
* More explicit input/search validation, cleanup, more tests
* Minor cleanup
* Normalize media_type string in lookup call
* Move key lookup, add tests via service calls
* Always allow play_media service calls
* No need to pass arguments to nested functions
* Add ability to ignore heos discovery
* Fetch player_id, update tests
* Handle failure state
* Update tests as there are two players in the mock now
* Adjust and add more tests
* Strip out player id lookup
* reverts per review
* one more revert
* Check that due date is not None
Check that due date is not None, prevents taks without due dates from breaking Calendar API
* Invert None check to reduce indentation
* Add support for Elexa Guardian water valve controllers
* Zeroconf + cleanup
* Sensors and services
* API registration
* Service bug fixes
* Fix bug in cleanup
* Tests and coverage
* Fix incorrect service description
* Bump aioguardian
* Bump aioguardian to 0.2.2
* Bump aioguardian to 0.2.3
* Proper entity inheritance
* Give device a proper name
* Code review
* add tests
* better error handling in dependency
* dont suppress errors
* add support for multiple devices
* add test for Unauthorized status
* raise error on service call failure
* add last_update_success_time and a failed update interval
* add failed update interval annd valid times to nws
* Revert "add last_update_success_time and a failed update interval"
This reverts commit 09428c96861aa4601832e6f6392ac3b18591159d.
* extend DataUpdateCoordinator
By default media players get a chrome cast icon, which feels
quite wrong for my old style amplifier that doesn't have any
connection to the rest of the word, except for a RS232 port.
* Working PoC
* Store
* Handle subscribing to MQTT and stopping stream when first telegram arrives
* Improve naming
* Now with test
* Better strings
* Fix Martins comments
* Improve mock device patching
* Bump dependency to v27
Add MQTT as after dependency
* Ensure a deleted intergration can be removed
* Update homeassistant/config_entries.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add support for Velux Gates
* Comment expanded and listing sorted alphabetically.
* There are constants in the cover entity integration for the valid device classes. Import and use those here.
* Blank line deleted
* Reformate code because of "CheckFormat" error
* Import only the names we need instead of the whole module
* Reformate code because of "CheckFormat" error
* isort error
* fallback to device serial number if no mac available
* make password optional to fix#35904
* update tests to reflect new flow
* fix snake case and AsyncMock
* add comments around why weird things are being done
* Centralite specific control seq of operation
* Remove Fan safeguards
* Split hvac_action property.
* Refactor hvac_action property.
Current hvac_action logic is Zen Within thermostat specific and differs
a bit from ZCL specs. Implement it as a separate class.
* Refactor hvac_action property for default thermostat
Follow more closely ZCL specs in parsing hvac state of the thermostat.
* allow lib to create AsyncTransport
* fix transport close issue
* fix zoom only cameras without PTZ presets
* catch profiles without encoding configuration
* also catch ServerDisconnectedError for ptz
* Ensure HomeAssistant can startup if homekit fails to load
* Update homeassistant/components/logbook/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Initial ZHA climate implementation.
* Add retryable_request decorator.
sort helpers imports.
* Check manufacturer for Climate implementation.
* Default zha.climate.operation_list to [Off]
* Migrate to climate 1.0
* Sort imports, properties and methods.
* Handle 'PRESET_NONE' presets.
* Use pi_heating/cooling_demand for HVAC action prop.
* Implement `running_state` HVAC channel property.
For ZHA thermostats which don't support `pi_heating_demand` or
`pi_cooling_demand' attributes.
* wip fan support
* Refactor retryable request logging.
* Rebase cleanup.
* Update climate discovery.
* Fix ZHA climate restoration.
* Bulk configure attribute reports.
* Use configure_reporting_multiple command for Light
More detailed response parsing of configure_reporting_multiple.
* Use ordered list for HVAC cluster attribute reports.
* Don't mutilate HVAC mode list.
* Add fan_mode property to fan channel.
* Fix type hinting.
* Expose fan mode only.
* Implement fan mode setting.
Drop support for HVAC_FAN_ONLY mode.
* Use ClimateEntity as base class.
* Cleanup debug code.
* Update time display for Sinope.
* Don't do many retries.
* Don't use multi attr reporting configuration.
* Make tests pass.
* Drop support for setpoint change source/amount.
* Cleanups.
* Drop aux heat
* Update tests.
* Drop Sinope temperature display code.
* Update tests.
* Refactor temperature setting.
* Update tests.
* Update Fan tests.
* Lint
* Black.
* Use correct logging levels
* Add services remote_set_led_on/remote_set_led_off to control changmi_ir led
* pylint: elif => if
* Fix services.async_register => platform.async_register_entity_service
* Update homeassistant/components/xiaomi_miio/remote.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* more fixes
* async
* more fixes
* fix
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Async remove call removed too much, resulting in disabled entities coming back after a restart
* Calling super().async_remove is no longer needed, changed to self.async_remove
* Yes, they should be sets...
The database fields are timezoned via DateTime(timezone=True), so the
default value should be timezoned too. When using cockroachdb this is
fatal and results in the recorder crashing.
* Fire events on homekit TV remote key press
* Changes from code review
* black
* isort
* flake8
* Update tests/components/homekit/test_type_media_players.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update to garminconnect 0.1.13
This will fix body composition sensors being unavailable
* Update requirements_all to garminconnect 0.1.13
* Update requirements_test_all.txt
* Avoid a context switch in the history api
The history api was creating a job to fetch the
states and another job to convert the states to
json. This can be done in a single job which
decreases the overhead of the operation.
* Ensure there is only one sqlalchemy session created per history
query.
Most queries created three sqlalchemy sessions which was
especially slow with sqlite since it opens and closes the
database.
In testing the UI is noticeably faster at generating history
graphs for entites.
* Add additional coverage
* pass hass first to _states_to_json and _get_significant_states
* Avoid a context switch in the history api
The history api was creating a job to fetch the
states and another job to convert the states to
json. This can be done in a single job which
decreases the overhead of the operation.
* Revert to original solution to avoid function redefine each call
* add BleBox lights support
* cherry pick refactoring from #35552
* Inherit from LightEntity instead of Light
Co-authored-by: J. Nick Koston <nick@koston.org>
* import LightEntity instead of Light
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* PyWeMo version bump to 0.4.43
Changes necessary to safely upgrade to pyWeMo 0.4.43. This includes catching ActionExceptions that may be thrown by pyWeMo when it is unable to interact with a physical device.
* Black formatting fix
* Fix isort issues
* Code review changes
* More code review fixes
* Linting fix
* Undo dict.get change
* Change a couple instances of dict[key] to dict.get
* Add and use ELECTRICAL_CURRENT_AMPERE constant
* Add and use ELECTRICAL_VOLTAGE_AMPERE constant
* Rename ELECTRICAL_VOLTAGE_AMPERE to ELECTRICAL_VOLT_AMPERE
* Fix imports
* Migrate to pyinsteon from insteonplm
* Rename devices entities
* Print ALDB even if not loaded
* Add relay to name map
* Change insteonplm to pyinsteon
* Update requirements_all correctly
* Code review updates
* async_set_speed receive std speed value
* default speed to std medium value
* Call async methods for fan on/off
* Comment await required in loop
* Remove emtpy and add codeowner
* Make services async and remove async_add_job call
* Remove extra logging
* New device as async task and aldb load in loop
* Place lock in context bloxk
* Limiting lock to min
* Remove .env file
* Avoid locking in the logging queue handler
We do not need a lock here as the underlying queue is already
thread safe.
* Add coverage for logging handle
* First cut of Rollease Acmeda Pulse Hub integration.
* Acmeda integration improvements:
- Moved common code into a base entity
- Battery level sensor added
- Localisation now working
* Added requirement for aiopulse now that it has been uploaded to PyPI.
* Exclude acmeda integration from coverage check as it relies on a hub being present.
* Fix Travis CI build issues.
* Remove unused constants.
* Remove unused group logic from cover.py
* Removed commented code from base.py
* Remove sensors (battery entities) on removal of hub.
* Remove unused groups from sensor.py
* Acmeda device and entity update made fully asynchronous using subscriptions to remove need for config polling.
* Updated aiopulse version dependency.
Removed non-functional battery charging indication.
* Rationalised common code to update entities into helpers.py
* Fix linting issue.
* Correct additional CI pylint errors.
* Index config_entries by entry_id.
Move entity loading and unloading to __init__.py
Add entry_id to dispatcher signal
Removed now unused polling code hub
Added config_flow unit tests
* Tweak to integration config_entry title.
* Bumped aiopulse module to 0.3.2.
Reduced verbosity of aiopulse module.
* Changed to using direct write of device state.
Removed old style async_step_init config_flow step.
* Remove superfluous battery_level and device_state_attributes from battery entity.
* Removal of unused strings.
Removal of unused create_config_flow helper.
Removal of stale comment.
* Remove use of shared container to track existing enities.
Moved removal and deregistration of entities to base class through use of dispatch helper.
* Fixed strings.json
* Fix incorrect use of remove instead of pop on dict.
* Add support for tilting covers, bump aiopulse version number.
* Bump aiopulse version to v0.3.4.
Fixed bug in cover supported_features.
* Bumped aiopulse version to 0.4.0
Update acmeda .coveragerc exclusions
* Removed already configured hub check from __init__.py async_setup_entry
Removed passing in hass reference to base entity class
Renamed entity async_reset to async_will_remove_from_hass
Changed device_info and properties
Migrated to CoveEntity from CoverDevice
Added dispatched_connect cleanup on hub removal
Removed unused entries from manifest
Removed override of battery icon
Renamed translations folder
* Reversed unintended change to .coveragerc
* Fixed config flow for multi-hub discovery.
* Acmeda enhancements as requested by MartinHjelmare
* Force import to connect to hub to retrieve id prior to creating entry
* Remove YAML configuration support.
* Tidied up config_flow and tests:
- removed unnecessary steps
- fixed typos
* Removed storage of hub in config_flow.
* add config option to set timeout for wiffi devices
Wiffi devices allow to configure the update period (=
full_loop_minutes). The integration shall respect the configured update
period and therefore need a configuration for the timeout, too.
* Move timeout from config flow to option flow
* add test for option flow
* Add support for "Window covering controller"
Some window cover devices such as Sunricher SR-ZG9080A are identified in deconz as "Window covering controller".
We need to include this device type in const.py to be integrated as type "cover" in home-assistant.
* Added Window covering controller to deconz tests
* Prevent updater from delaying startup
The updater sometimes times out as seen in
#33833 and the linked issues. The issue was
presenting again today as it appears the service
is overloaded again.
* s/hass.loop/asyncio/g
* Add config flow to gogogate2 component.
* Using a more stable gogogate api.
* Getting config flows working better by using different downstream library.
* Fixing options not getting default values.
Adding availability to cover entity.
* Simplifying return types of function.
* Address PR feedback.
* Making user config flow not abort.
* Using DataUpdateCoordinator.
* Addressing PR feedback.
* Using standard method for using hass.data
* Split auth fail test into separate tests.
* Use built in queue log handlers to avoid formatting logs in the event loop
Logging is now formatted and written in another thread to
ensure there is minimal impact on the event loop when
a log message is processed.
This change replaces the existing AsyncHandler log handler
as python 3.7+ now offers an off the shelf solution
* add a simple test
* s/async_migrate_log_handlers_to_queue/async_activate_log_queue_handler/g
* Add device triggers to support setting turn_on event
* Add turn on event
* Add unique_id based on config entry
* Adjust tests for addition of uuid
* Supported features are now always same
* Switch to player_setup fixture that actually start platform
* Update homeassistant/components/arcam_fmj/const.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* openwindow0: this is the part for the HA itself
* Update homeassistant/components/tado/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/tado/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* new version after review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Provide yeelight unique_id using ssdp discovery
* Fixes
* Comment fix
* Cleanup initialization logic and add unique id to binary sensor
* Update homeassistant/components/yeelight/__init__.py
Co-authored-by: Teemu R. <tpr@iki.fi>
* Update homeassistant/components/yeelight/__init__.py
Co-authored-by: Teemu R. <tpr@iki.fi>
* Update comment
* Update comment
* Fix wrong model docstring
Co-authored-by: Teemu R. <tpr@iki.fi>
* Fix for creating the device name
Creating the devicename included a typo and was missing the custom (preferred) name set by the OZW Admin tool.
* update comments
"verify_ssl":"AdGuard Home \u0438\u0437\u043f\u043e\u043b\u0437\u0432\u0430 \u043d\u0430\u0434\u0435\u0436\u0434\u0435\u043d \u0441\u0435\u0440\u0442\u0438\u0444\u0438\u043a\u0430\u0442"
"verify_ssl":"AdGuard Home \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u0443\u0435\u0442 \u0441\u043e\u0431\u0441\u0442\u0432\u0435\u043d\u043d\u044b\u0439 \u0441\u0435\u0440\u0442\u0438\u0444\u0438\u043a\u0430\u0442"
},
"description":"\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u0442\u0435 Home Assistant \u0434\u043b\u044f \u043c\u043e\u043d\u0438\u0442\u043e\u0440\u0438\u043d\u0433\u0430 \u0438 \u043a\u043e\u043d\u0442\u0440\u043e\u043b\u044f AdGuard Home.",
"title":"AdGuard Home"
"description":"\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u0442\u0435 Home Assistant \u0434\u043b\u044f \u043c\u043e\u043d\u0438\u0442\u043e\u0440\u0438\u043d\u0433\u0430 \u0438 \u043a\u043e\u043d\u0442\u0440\u043e\u043b\u044f AdGuard Home."
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Paulus Schoutsen
J. Nick Koston
Anders Melchiorsen
cgtobi
Alexei Chetroi
Bram Kragten
Phil Bruckner
Franck Nijhof
Pascal Vizeli
Erik Montnemery
Daniel Shokouhi
Xiaonan Shen
shker
Eugene Prystupa
HomeAssistant Azure
David F. Mulcahey
Jannik Beyerstedt
Daniel Pervan
SukramJ
Aidan Timson
Adam Liddell
Ville Skyttä
dependabot[bot]
kennedyshead
Robert Svensson
Kevin Fronczak
Rohan Kapoor
Rami Mosleh
bsmappee
Haemish Kyd
Joakim Plate
tizzen33
Markus Bong
Jakob Schlyter
Dermot Duffy
pnguyen-tyro
AJ Schmidt
jjlawren
Eric Severance
Alan Tse
Aaron Bach
Greg Dowling
Jakub Bednář
Diefferson Koderer Môro
Paul Annekov
mdegat01
Jelle Raaijmakers
Harryjholmes
jduquennoy
Shulyaka
Chris
Robert Van Gorkom
Bas Nijholt
Maciej Bieniek
starkillerOG
therealryanbonham
Sava Tshontikidis
Chris Talkington
Mikkel Pilehave Jensen
Raman Gupta
Alexander Hardwicke
Pascal Vizeli
Marcel van der Veldt
Jc2k
brefra
Mateusz Soszyński
Martin Eberhardt
akloeckner
Sean Mooney
David Nielsen
Martin
Joakim Sørensen
jfearon
Baptiste Candellier
Jeff Irion
RogerSelwyn
Rick Sherman
Anton Tolchanov
michaeldavie
Jürgen Haas
Tim van Cann
Tom
Justin Berstler
Nolan Gilley
smugleafdev
Teemu R
Bouwe Westerdijk
ktnrg45
Kevin Eifinger
Robbie Trencheny
Martin Hjelmare
uvjustin
Courtenay
John Hollowell
MatthewFlamm
Gage Benne
Andrey
guillempages
Quentame
Sven-Hendrik Haase
Michał Mrozek
definitio
Tom Harris
Dave T
Gleb Sinyavskiy
Kdemontf
Indu Prakash
Emily Mills
rajlaud
Andre Lengwenus
Oscar Calvo
Thomas Le Gentil
Hedgehog57
terminet85
Thomas Hollstegge
celestinjr
Allison
Alex van den Hoogen
zpetr
tomtzeng
Steven Looman
Jonas Thuresson
zvldz
Mark Coombes
Adam Žurek
Filip Pytloun
Damien Levin
Gerard
James Nimmo
David Ryan
Andrew Hayworth
Tom Brien
Brian Rogers
Ziv
Michael J. Kidd
Fredrik Erlandsson
Davide Varricchio
avocadio
Kit Klein
ehendrix23
craiggenner
fb22
Jeffery To
Josef Schlehofer
Sean Nyekjær
Bas Nijholt
marawan31
indykoning
Adam Belebczuk
Philip Allgaier
Michael Auchter
etheralm
Zac West
N1c093
Ian Harcombe
Tom Schneider
Benoit Louy
zewelor
Shane Qi
mvn23
mreiling
MarBra
Tony Phan
Yue Kang
Janitha Karunaratne
springstan
Fredrik Rambris
Igor Gocalinski
Robin Wohlers-Reichel
Donnie
Felipe Martins Diel
Johan Henkens
Ian
shbatm
Jörg Thalheim
StevusPrimus
Giel Janssens
z00nx 0
eyager1
Hedda
matgad
Markus Ressel
Jens Østergaard Nielsen
Thomas Lovén
jrester
Lindsay Ward
Alexey Kustov
matlimatli
nicx
Frederik Gladhorn
Austin Mroczek
Emilv2
Jason Hunter
Scotte Zinn
Fabian Peter Hammerle
Eduard van Valkenburg
Patrick Kishino
willscottuk
Vincent Le Bourlot
J.P. Hutchins
Boris Kaplounovsky
Sean Leonard
baurandr
Aaron Godfrey
Brynley McDonald
Konstantin Antselovich
Martin Weinelt
Marius
András Rutkai
Luke Pomfrey
Wim Haanstra
Florent Thoumie
Igor
Kumar Gala
Luke Pomfrey
Barry Williams
mlemainque
foxy82
Daniel Høyer Iversen
gjbadros
shbatm
k2v1n58
Ohad Levy
David Zhu
Nacho Barrientos
Charles Garwood
Spartan-II-117
Steven Rollason
gadgetmobile
MatsNl
Mariusz Kryński
teldri
braam
isk0001y
Minims
Julius Mittenzwei
mnaggatz
Robert Chmielowiec
Sören Oldag
Hugues Granger
Daniel Perna
thomkaufmann
Odin Ugedal
Nick Whyte
Ron Klinkien
Andrew Fahrenholtz
tetienne
rhadamantys
Alan Murray
Joao Carreira
Steffen Zimmermann
Carlos Giraldo
Glenn Waters
zacpotts