Increase default rate limit for all states and entire
domain states to one minute
Ensure specifically referenced entities are excluded from
the rate limit
Change #40666 used mutagen's ID3 TextFrame to wrap metadata information.
While this is the correct behavior for container formats that use ID3
metadata tags, such as MP3 and linear PCM, Ogg container formats use
a different metadata format. For these containers, the metadata needs to
be a bare str, not wrapped in a TextFrame.
Disable expire_on_commit for the event writer. Since we never expect the
old_state_id to change in the database, it was never worth the expense of
refetching the id after the commit.
* Add service that can clean up by deCONZ orphaned entries from device and entity registry
* Fix existing tests
* Add new test
* Add some inline comment to the service
* Use camera name as device name
* Add Surveillance Station home mode switch for Synology DSM
- camera uses Surveillance Station as device parent
- camera uses camera name instead of NAS name + camera name
* Without device_class otherwise no icon
* Update .coveragerc
* Update zha.permit schema to support install code
* Move install code to core helpers
* QR code converter for enbrighten
* Fix schemas
* Update test for permit service
* Refactor zha.permit to accept install codes
* Test zha.permit from QR code
* Fix regex for Embrighten QR code
* Add regex for Aqara QR codes
* Add Consciot regex for QR code
* Reuse test params for WS tests
* ZHA WS permit command with install code
* Tests for zha.permit WS service
* Refactor zha.permit and zha.remove service to use ATTR_IEEE for the address
* Make pylint happy
* Deprecate only ieee_address param for now
* Add test coverage of binary sensor.
Update conftest to be generic.
* Pass total config structure to run_base_test.
Simple devices like sensor/switch do only have one entry in the
dict array, whereas e.g. switch have multiple entries.
* Use STATE_ON / _OFF for binary_sensor test.
* Update coveragerc
Only exclude files that uses a third party library.
* Remove modbus/* from coveragerc
* Remove modbus from .coveragerc
* Update .coveragerc
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
The Default Values Suggest That The User enters 'light' as a parameter for the theme name. 'Light' is, however, not a valid option on a fresh install of HA unless a user manually downloads a theme with the name 'light'.
* Use set not list
* Events are not entities
* Don't await unload_events
* Remove checks of entities content in tests
* List to set comprehension
* Why is it so hard to remember that sets arent parenthesis...
* Add Modbus cover
* Fix improper commands written for Modbus cover via coil
* Make changes per review comments
* Fix default hub not defined
Since support for multiple hubs was added, the default hub option
was not implemented correctly. Now I added necessary logic to make
it work. First hub in a list will be used as a default hub.
* Move Cover config under Modbus section
* Revert setting up a default hub alias
* Make hub mandatory for Cover
* Add default scan interval
* Read scan_interval from discovery info
* Fix linter error
* Use default scan interval from Cover platform
* Handle polling for Modbus cover directly inside entity
* Move covers under hub config
* Fix for review comment
* Call update() from Cover actuator methods
* Fix time validation
* Store all entities in dict
* Use stored unique id to select if to create entity or not
* Remove unnecessary init
* Change so same physical sensor doesnt try to create multiple battery sensors
Change so groups get created properly
* Add controls in tests that entities are logged correctly
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Fixed ORP method not being @property, fixed unique_id potential issue. Does not address comments from PR.
* Rewrote coordinator for updated dict structure, rewrote sensors to parse new data structure.
* Added alarms as attributes on all entities which support alarm reporting.
* Updated SENSOR_TYPES to sensor_types to adhere to snake case in pylint.
* Addressed PR comments.
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Removed binary sensor conditions (alarms, on/off sensor types) and added ability for multiple guard conditions
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Updated per comments in PR for Pump Type and removal of force_update().
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/common.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Correctly asserting conditions for the login exception case.
* Update .coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Mike Hershberger <mike.hershberger@gmail.com>
Co-authored-by: Chad <54695185+chadlyy@users.noreply.github.com>
Co-authored-by: Tim Empringham <tim.empringham@live.ca>
Co-authored-by: djtimca <60706061+djtimca@users.noreply.github.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add more units and device classes
* Battery level is a value beteen 0 and 9 where 9 indicate full
Actual 0 battery can't occur since since then we would get to signal
* Adjust tests
* Add wind direction and adjust rain rate
* Adjust data types to be None rather than empty string
* Set counter values to count unit
* Forgotten unit
Since most of the json serialize work for the websocket was done
multiple times for the same message, we can avoid the overhead
of serializing the same message many times (once per websocket
client) with a cache.
* Add logging to Bond fireplace entity for troubleshooting turn off problem
* Update homeassistant/components/bond/light.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update homeassistant/components/bond/light.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Updates xknx to 0.14.0
* Review: Explicity add state attributes to weather device
* Review: Remove state attributes from weather device
* Review: Add `counter` as a state attribute to binary_sensors
* Add binary_sensor for cloud connectivity to HomematicIP Cloud
* Fix Test
* Remove device_class
* Switch from _device to _home
* Switch from _device to _home for sensor
* Added UniFi Uptime sensor
Added the UniFi uptime data as a sensor. Untested.
* Update sensor.py
Updated code as a result of the tests.
* Changed timestamp format and device class
Converted state to iso timestamp and changed device class to DEVICE_CLASS_TIMESTAMP.
* Updated unit of measurement to None
* Added import
* Update homeassistant/components/unifi/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Removed whitespace
* Added the uptime sensors option to the config flow
* All the unit tests should be there now
* Whoops
* Fixed translation
* Properly formatted the code
* Flake8 really has angel eyes
* Black should also be satisfied now
* Should have satisfied all static code analysis tools
* Fixed add uptime sensor function
* Fixed overintendation
* Fixed unit tests
* Made a spelling mistake during editing of unit tests
* Test verifies if utc time is correct
* Converted to iso format
* Converted unit test to iso format
* Unit test sensor json had the wrong uptime name
* Added options_updated handler
* Fixed remove sensors unit test
* Update homeassistant/components/unifi/sensor.py
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
* Update homeassistant/components/unifi/sensor.py
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
* Update test_device_tracker.py
Removed uptime from the devices
* Fixed black formatting issue
* I think the code coverage should be good now
* Trying to add the sensors again
* Using signals to hopefully trigger the controller to add them again
* Forgot import
* Sorted components
* fixed isort comments
* Removed CLASS and DEVICE_CLASS
* Added TYPE again
* Removed double underscores
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
Fix pilight lights would always turned on at max brightness instead of just turning on. Some 433mhz dimmers (like the KAKU series) remember their last brightness setting.
Fix pilight lights would not respect configured dimlevel_min
* Prompt to reauth when the august password is changed or token expires
* augment missing config flow coverage
* augment test coverage
* Adjust test
* Update homeassistant/components/august/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* block until patch complete
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Move setup without devices
* Remove not needed tests
* Move set temp test
* Move set temp cool mode test
* Run black
* Move test target temperature
* Move test current temperature
* Move test current humidity
* Move test hvac mode
* Move test hvac modes
* Move test fan modes
* Move test service fan modes
* Move test fan state
* Move test supported features
* Move test idle state
* Move test humidity invalid state
* Move test humidity without state
* Move test device cool
* Rename test
* Move test set mode service
* Clean imports
* Clean strings
* Only load climate platform for climate tests
* Use http status codes and add HTTP_BAD_GATEWAY constant
* Address review comments:
- using constants in tado integration
- using constant in media_player init.py
* Add and use HTTP_ACCEPTED constant
The HomeKit spec does not permit the color temp characteristic
being exposed when color (hue, sat) is present. Since
Home Assistant will still send color temp values, we need to
convert them to hue, sat values for HomeKit
The HomeKit spec does not permit the color temp characteristic
being exposed when color (hue, sat) is present. Since
Home Assistant will still send color temp values, we need to
convert them to hue, sat values for HomeKit
* add unique_id to canary alarm_control_panel
* Update test_alarm_control_panel.py
* Update alarm_control_panel.py
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor zeroconf setup to be async
Most of the setup was calling back to async because
we were setting up listeners. Since we only need
to jump into the executor to create the zeroconf
instance, its much faster to setup in async.
In testing this cut the setup time in half
or better.
* partial revert to after_deps
As a result of refactoring, there is duplicate code
we can now reduce.
Additionally `_wrap_state` can be removed because
it had unreachable checks for `None`
* Use entity_class: 'safety' in storage sensors
and more meaningful icons then 'mdi:test-tube', not sure if these are even necessary, given the device_class that defines the icons too?
* Set device_class, not icon
Still, the temperature sensors have both set, should I take these out in this go too? While we're at it....
* added device_class temperature to temp sensors
and removed explicit icons
do we need to set a D_c also on the Status sensor? line 187
* revert device_class Safety
which is now set in const.py
following up on https://github.com/home-assistant/core/pull/39757#pullrequestreview-483705147
* Use DEVICE_CLASS_SAFETY from const
+ revert temp to avoid conflict
* const from binary
* reverted non binary status sensors
to use: "mdi:checkbox-marked-circle-outline" and set None to device_class
Co-authored-by: Quentame <polletquentin74@me.com>
* Added check for mandatory "arg" of sensors
* Make pylint happy
* Moved to vol validator function for "arg" checks
* Make pylint happy once again
* Adjustments from code review
The powerview hub, seemingly randomly, will occasionally not
provide data for cover positions. Some requests will return the
desired response, but minutes later the same request might not.
It appears this issue is being experienced by a number of people:
https://community.home-assistant.io/t/hunter-douglas-powerview-component-expanding-this-api/88635/48
While an unfortunate bug with the hub, crashing the integration
as a result of this missing data appears somewhat excessive.
This patch adds a simple check to ensure the 'position' key
has been returned by the hub before attempting to access its
data.
The powerview hub, seemingly randomly, will occasionally not
provide data for cover positions. Some requests will return the
desired response, but minutes later the same request might not.
It appears this issue is being experienced by a number of people:
https://community.home-assistant.io/t/hunter-douglas-powerview-component-expanding-this-api/88635/48
While an unfortunate bug with the hub, crashing the integration
as a result of this missing data appears somewhat excessive.
This patch adds a simple check to ensure the 'position' key
has been returned by the hub before attempting to access its
data.
* Update ZHA dependencies
* Update zigpy-zigate
* Move ZNP on top of the radios so it's probed 1st
Some stick don't like if there was some unexpected traffic on the port
prior the initialization.
* Update dependencies
* Fibaro climate improvements
1, Implemented support for multinode climate devices, such as Danfoss HC10, differentiating zones based on endPointId
2, Improved recognition of temperature sensor subdevice for climate devices
3, Changed default opmode for devices without an opmode to "auto" instead of "fan_only", for better clarity and to avoid misunderstandings
* pylint inspired code restructuring to reduce depth
gotta love pylint
* Add support for events from Loitering guard and Motion guard
* Improve naming of events originating from applications Fence guard and VMD4 (Loitering guard and motion guard also benefit from this)
* Improvements for systemmonitor
* Use MDI CPU icon (bit architecture determined at runtime)
* Consistent usages of "percent" (ensured backwards compatibility by explicity setting the entity_id)
* Default value "/" (root) for disk_* sensors to prevent runtime issues if not specified in configuration
* Added CPU temperature sensor to systemmonitor
* Code streamlining of CPU temperature retrieval
* Corrected sensor state handling and added "available" logic
* Corrected ENTITY_ID to include argument
* Optimized "available" handling & CPU temperature detection
* Corrected tuple for CPU temperature determination
* - Do not create CPU temperature entity if no sensor data can be read
- Re-use temperature sensor labels from "glances" integration
* Array fix
* Corrected sensor array access
* Handle empty temperature sensor labels (same logic as used by "glances")
* PR comments: Setting unique_ID and f-strings
* Removed unused constants
* Revert entity rename (wait until next release)
* Replace old source prefixing for channels with new media browser
* Restore support to call select source with prefix
* Drop warning log for deprecated call method
* Implement local media finder and integrate into cast
* update to media source as a platform
* Tweak media source design
* fix websocket and local source
* fix websocket schema
* fix playing media
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add resolve_media websocket
* Register that shit
* Square brackets
* Sign path
* add support for multiple media sources and address PR review
* fix lint
* fix tests from auto whitelisting config/media
* allow specifying a name on the media source
* add tests
* fix for python 3.7
* Apply suggestions from code review
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add http back to cast and remove guess_type from executor as there is no i/o
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add tests for Broadlink remotes
* Reformat the tests with Black
* Add a helper method for device setup
* Rename device.setup() to device.setup_entry()
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Make sure we set discreteOnlyOpenClose for binary sensors
* Mark switches that are assumed state as commandOnlyOnOff
* Drop stray extra line
* Fix pylint error
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* Linter suggestions
* Store coordinator in hass.data[supla_coordinators]
* Server cleanup
* Spelling mistake
* Fixes suggested in review
* Pass server and coordinator during async_setup_platform
* Linter changes
* Rename fetch_channels to _fetch_channels
* Linter suggestions
* Store coordinator in hass.data[supla_coordinators]
* Server cleanup
* Fixes suggested in review
* Pass server and coordinator during async_setup_platform
* Linter changes
* Remove scan interval configuration option
* Linting
* Isort
* Disable polling, update asyncpysupla version
* Black fixes
* Update manifest.json
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
As documented in the OWM API (https://openweathermap.org/api/one-call-api), rain and snow are reported on a 1h basis:
current.rain
current.rain.1h (where available) Rain volume for last hour, mm
current.snow
current.snow.1h (where available) Snow volume for last hour, mm
* add reload service
* test for reload service
* missing file
* Revert "missing file"
This reverts commit 24391fe3b9d9a5c03da8249422b394634a633bb2.
* Revert "test for reload service"
This reverts commit 5bda48d07000e533298766b5c3acb90e0f91fb50.
* Rename ipaddr to ip_addr
* Move custom services to entity services
* Remove platform data
* Change service setup to callback
* Rename ip_addr to host
* Use _host inside class
* Provide a logbook option entity_matches_only to optimize for single entity id lookup
When entity_matches_only is provided, contexts and events that do not
contain the entity_id are not included in the logbook response.
* Update homeassistant/components/logbook/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* api only takes a single entity
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Store printer instances in hass.data
* Add SyncThru device registry support
* Use config entry id as hass.data key
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use printer hostname as device registry name
* Handle non-syncthru device more gracefully on entry setup
* Use device identifiers rather than connections to link entities with devices
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Prior 0.113 all lights and switches were reported as dimmable devices and this was fixed by #37978.
However, under some circumstances Alexa will not smoothly transition from those broken devices to the new ones as it cache the list of entities.
It is imperative to have Alexa rediscover all devices and then remove the now non-responding duplicates using the Alexa phone App. This can take quite a while if you have lots of devices.
An alternative would be to log to the Alexa web site and remove all the lights instead and then re-discover them all.
If you have multiple echo devices on your network, it is possible that the entries would continue to show as duplicates. This is due to an individual echo devices caching the old list and re-using it.
The only known solution for this is to remove your echo devices from your Amazon account and re-add them.
After that, have Alexa rediscover all your devices.
This is a one-off requirement.
Fixes#39503
It is no longer necessary to provide a list of entities to monitor
to the template platforms.
The template is now re-evaluated whenever
a referenced entity changes state, and new entities are automaticlly
discovered.
Automatic analysis can now determine the entities for all templates
without the need for manual setup.
* Start moving stuff to iOS
* Load config on to hass.data
* Remove un used logging
* Switch to Rest API
* Add schema
* Return whole config in new view and leave old 100 % the same
* Update doc strings
* MartinHjelmare feedback
* Move register view to async_setup_entry
* Make async_track_template_result track multiple templates
Combine template entity updates to only write ha
state once per template group update
* Make async_track_template_result use dataclasses for input/output
* black versions
* naming
after_dependencies were checking hass.config.components
to see if something was already setup. We did not do
the same for dependencies which resulted in trying
to set them up more then once.
Noticed when `homeassistant.setup` was set to debug
logging and many integrations were announcing
waiting on http when it was already setup.
* Move options import to async_setup_entry
* Add tests for insteon init
* Move common constants to const
* Clean up to adhear to standards
* Create mock insteon device manager
* Update for HA standards
* Use keys and align to config_flow steps
* Fix default port for hub v1
* Update doc string to represent function
* Remove dump print commands
* Add modem_type entry
* Simplify dict key test
* Setup platforms in async_setup_entry
* Black
* Black tests
* Opened a new fresh page to clean my mess.
* Solved pylint warnings
* Fixing pylint issue of defining attr outside init.
* Excluded files from being tested by codecov.
* Solved binary sensor error.
* Fixed some stylisation errors.
* Resolved input not updating problem.
* Added port entry to test file.
* Added tests for create_entry.
* Added support for better state management.
* Increased code coverage of config_flow.py & made some tweaks.
* Increased coverage of config_flow.py by adding tests for unknown exceptions.
* A small bugfix.
* Stylised code as per Chris' suggestions.
* Stylised code again.
* Improved quality of test code.
* Added step_id in config flow tests.
* Update meteo_france to use CoordinatorEntity
* Update homeassistant/components/meteo_france/sensor.py
* Update homeassistant/components/meteo_france/weather.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Close the ADB connection when there is an exception
* Add a test
* Split a comment onto two lines
* Fix test ('async_update' -> 'async_update_entity')
* 'close' -> 'Close'
Updated the calendar event dict to contain a `summary` key so that the
title will display on the calendar panel. Also update the start/end
date to not include time information if the event is all day so that it
renders as an all day event on the calendar panel.
* Add device name to all webhook logs to help with multiple devices
* Reload notifications when we update the registration, update from rebase
* Make hassfest happy
* Adjust caplog test to accomodate log message change
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add basic light platform
* Add sensor support
* Bump aioshelly to 0.2.1
* Lint
* Use UNIT_PERCENTAGE
Co-authored-by: Maciej Bieniek <bieniu@users.noreply.github.com>
* Format sensor.py
Co-authored-by: Maciej Bieniek <bieniu@users.noreply.github.com>
* Use icmplib for ping when available
* Update homeassistant/components/ping/binary_sensor.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Revert "Update homeassistant/components/ping/binary_sensor.py"
This reverts commit 618f42512a89834bb8b2ed7830e7e77d79a29f44.
* move it up so its easier to see
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Remove unnecessary exception re-wraps
* Preserve exception chains on re-raise
We slap "from cause" to almost all possible cases here. In some cases it
could conceivably be better to do "from None" if we really want to hide
the cause. However those should be in the minority, and "from cause"
should be an improvement over the corresponding raise without a "from"
in all cases anyway.
The only case where we raise from None here is in plex, where the
exception for an original invalid SSL cert is not the root cause for
failure to validate a newly fetched one.
Follow local convention on exception variable names if there is a
consistent one, otherwise `err` to match with majority of codebase.
* Fix mistaken re-wrap in homematicip_cloud/hap.py
Missed the difference between HmipConnectionError and
HmipcConnectionError.
* Do not hide original error on plex new cert validation error
Original is not the cause for the new one, but showing old in the
traceback is useful nevertheless.
* Improve next_rain sensor attributes
* Add log message to identify missing condition
* Add a condtion
* Set the coordinator for 1 hour rain forecast in English
* Attribut dict keys shorten
* reverse transalate the API results for next rain
* Use f string for the keys in the dict
* Remove Logging from state property
* Remove other logging from state property
We're not operating on the installed package anyway, and necessary
dependencies are handled with tox deps.
As a nice bonus side effect, doing this sidesteps breakage caused by
pip's (up to 20.2.2 at least) behavior of prepending site-packages to
sys.path in certain cases, which in turn results in failures e.g. if a
version of typing that is incompatible with the (now overridden)
stdlib is installed there. And that combined with also pip's behavior
of installing a default build system consisting of setuptools and
wheel under the hood when it sees our pyproject.toml without a
build-system defined would provoke the breakage before we have a
chance to uninstall typing. (There are ways around this too, but
skipping the install makes the issue moot at least with our current
dependency set.)
Some new HomeKit climate devices, like XiaoMi Air Conditioning Controller P3 are heater-cooler devices rather than
thermostat devices. This commit adds support for the heater-cooler class via homekit_controller.
* Include the context_entity_id in the logbook api
context_entity_id is the first entity seen during
a time period that includes the context
* update test
* more of them
* include friendly name
* pylint wants a ternary
* Refactor
* performance
* fix homekit context
* Fix self describing events
* Fix external_events
* Add ZwaveStringSensor to OZW integration
* Remove unnecessary new line
* Set enabled default to false for ZwaveStringSensor
* Add missing decorator for property
* Add a test for ZwaveStringSensor
* Also test state of ZWaveStringSensor
* Remove entity type check
* Add binary sensors to Risco integration
* Minor cleanups
* RiscoEntity base class
* Platinum score
* Remove alarm parameter in _setup_risco
* Avoid zones and partitions sharing unique ids
Before this proposed change, all of the zones related to a running program turn "on", but it's not possible to know which zone is actually running (vs. queued). Adding the mapped state values (they are the same as program status values) as an attribute will allow inspection of all 3 states.
* Wait for broker to ACK MQTT operations
* Deduplicate new code
* Fix tests
* Improve test
* Don't hold PAHO lock when waiting for ACK
* Fix tests
* Add constant for ACK timeout
Now that python 3.7 is the minimum supported version, we can
use the more efficient SimpleQueue in the recorder as it does
not have to use threading.Lock
* Implement config flow in the Broadlink integration
* General improvements to the Broadlink config flow
* Remove unnecessary else after return
* Fix translations
* Rename device to device_entry
* Add tests for the config flow
* Improve docstrings
* Test we do not accept more than one config entry per device
* Improve helpers
* Allow empty packets
* Allow multiple config files for switches related to the same device
* Rename mock_device to mock_api
* General improvements
* Make new attempts before marking the device as unavailable
* Let the name be the template for the entity_id
* Handle OSError
* Test network unavailable in the configuration flow
* Rename lock attribute
* Update manifest.json
* Import devices from platforms
* Test import flow
* Add deprecation warnings
* General improvements
* Rename deprecate to discontinue
* Test device setup
* Add type attribute to mock api
* Test we handle an update failure at startup
* Remove BroadlinkDevice from tests
* Remove device.py from .coveragerc
* Add tests for the config flow
* Add tests for the device
* Test device registry and update listener
* Test MAC address validation
* Add tests for the device
* Extract domains and types to a helper function
* Do not patch integration details
* Add tests for the device
* Set device classes where appropriate
* Set an appropriate connection class
* Do not set device class for custom switches
* Fix tests and improve code readability
* Use RM4 to test authentication errors
* Handle BroadlinkException in the authentication
* Convert template lock to use async_track_template_result
* Convert template switch to use async_track_template_result
* Convert template fan to use async_track_template_result
* Convert template binary_sensor to use async_track_template_result
Co-Authored-By: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template cover to use async_track_template_result
* Convert template light to use async_track_template_result
* Convert template vacuum to use async_track_template_result
* Remove unused code from the template integration
Co-authored-by: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template lock to use async_track_template_result
* Convert template switch to use async_track_template_result
* Convert template fan to use async_track_template_result
* Convert template binary_sensor to use async_track_template_result
Co-Authored-By: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template cover to use async_track_template_result
* Convert template light to use async_track_template_result
* Convert template vacuum to use async_track_template_result
Co-authored-by: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template lock to use async_track_template_result
* Convert template switch to use async_track_template_result
* Convert template fan to use async_track_template_result
* Convert template binary_sensor to use async_track_template_result
Co-Authored-By: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template cover to use async_track_template_result
* Convert template light to use async_track_template_result
Co-authored-by: Penny Wood <Swamp-Ig@users.noreply.github.com>
* Convert template lock to use async_track_template_result
* Convert template switch to use async_track_template_result
* Convert template fan to use async_track_template_result
* Convert template alarm_control_panel to use async_track_template_result
* Convert template lock to use async_track_template_result
* Convert template switch to use async_track_template_result
* Convert template fan to use async_track_template_result
* Add audio to stream component
* Use container options to do most fmp4 formatting
* Add test for treatment of different audio inputs
* Add test for treatment of different audio inputs
* pcm_mulaw frames should be s16
* Use seek to get BytesIO length
* Remove unused utcnow
* Remove peek_next_audio_pts
* only demux audio and video packets - ignoring data and subtitle streams
Co-authored-by: Jason Hunter <hunterjm@gmail.com>
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Avoid reading meters on startup
Cherrypick @bdraco's suggestion
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Remove unnecessary try/except block
This checks for the same exception just prior in execution on L51.
* Remove unused return values
* Add tests
* Improve tests and coverage
* Use more pythonic control flow
* Remove all uses of hass.data
Co-authored-by: J. Nick Koston <nick@koston.org>
* catch KeyError and UnboundLocalError in light setup
* add check for no dimmer info from control4
* use existence of light_level data to enable dimming
* check if light data is not in dimmer and non_dimmer
* add item_variables logging
* add await to item_variables call
* add full item dump
* remove full item list
* change logging message
* fix typo
* reduce code inside try and add all entities at once
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* format with black
Co-authored-by: J. Nick Koston <nick@koston.org>
* async_update
* isort and pylint
* @shenxn suggestions
Co-authored-by: Xiaonan Shen <s@sxn.dev>
* async_update
* store the command from the beginning
* command as string
* f-string instead of str.format
* create_subprocess_shell > create_subprocess_exec
more logs
* isort
* types
* use asyncio.wait_for
* Update homeassistant/components/ping/binary_sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* @bdraco review changes
* Update homeassistant/components/ping/binary_sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: Xiaonan Shen <s@sxn.dev>
Co-authored-by: J. Nick Koston <nick@koston.org>
INFO:homeassistant.setup:Setting up ffmpeg
DEBUG:haffmpeg.core:Start FFmpeg with ['ffmpeg', '-version', '']
ERROR:haffmpeg.core:FFmpeg fails [Errno 2] No such file or directory: 'ffmpeg': 'ffmpeg'
On startup we run an sqlite3 quick_check to verify the database
integrity. In the majority of cases, the quick_check takes under
10 seconds.
On systems with very large databases and very slow disk/cpu,
this can take much longer so we freeze the timeout.
* Update __init__.py
Further fixes for HC3 compatibility.
* Update homeassistant/components/fibaro/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Verify and case
* Review comments
* Update homeassistant/helpers/event.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/helpers/event.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Merge original changes from #23590
* guard
* adjust
* adjust
* adjust
* Update async_render_to_info for recent codebase changes
* no more protected access
* do not fire right away per review comments
* update test to not fire right away
* closer
* rework tests for non firing first
* augment coverage
* remove cruft
* test for complex listen add/remove
* update docs to match review feedback to not fire right away
* preserve existing behavior
* fix test
* Ensure listeners are cleaned up
* de-dupe and comment
* de-dupe and comment
* coverage
* test to login again if we go from exception to ok to exception
* Update homeassistant/core.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/helpers/event.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* rename _boolean_coerce to result_as_boolean and move it out of event
* additional coverage
* Add more tests (may still be able to trim this down)
Co-authored-by: Swamp-Ig <github@ninjateaparty.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* handle PlatformNotReady
* set timeout in bridge
* set timeout in test
* Revert "handle PlatformNotReady"
This reverts commit 118ee06ba016f88abdf767efdf4ef1eacb4e5caa.
With this change, we should still be able to startup
in under 10 minutes if something really goes wrong.
The testing done in #38661 was used to determine
these values.
* Abort flow if MAC-address can't be found
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Adjust homekit controller pairing errors back to a single step
* adjust test
* Revert "Adjust homekit controller pairing errors back to a single step"
This reverts commit e5ed89bbbb053bb814219052ae99697a5a7b4e46.
* Revert "adjust test"
This reverts commit c2e9f21a8401c144315260f6fdf71ea8060f8ca3.
* adjust
* prune
* prune
* merge
* Update tests
* remove debug
* adjust
* Multiple steps
* adjust the test
* Review: if not to pop
* Review: async_add_job --> async_add_executor_job
* Review: const
* Review: start logging messages with capital letter
* Review : UTC isoformated time --> fix "Invalid date""
* Fix hail forecast condition
* Review: _show_setup_form is a callback
* Fix update option
* Review: no icon for next_rain
* Review: inline cities form
* Review: store places as an instance attribute
* UNDO_UPDATE_LISTENER()
* Add support for slack bot icons via URL
* Removed as_user property from message send
* Use f-strings rather than concatenation
* Don't span lines with complex expression
If a device on the network presented a bad name, zeroconf
would throw zeroconf.BadTypeInNameException and the service
browser would die off. We now trap the exception and continue.
* Bump pysyncthru version to 0.7.0
This change includes a heavier refactoring, using a more reliable source for the device status and parsing display strings only for additional details
* Fix test flow to ensure a status is set
* Don't allow duplicate nightscout configs
* Fix nightscout translations
* Remove unnecessary should_poll method
* Remove SVG attribute, as it was duplicating the state
* Use aiohttp client session from HA
* Move validate_input outside the config class
* Use the entry unique_id on the sensor
* Move create entity logic
* Handle unexpected exception on Nightscout config
* update device
* add binary sensor
* updates post rebase
* fix entity type post rebase
* fix post rebase
* fix add entities
* fix name
* review comments
The default on python 3.8 is for max_workers is significantly
lower than the default on python 3.7 which means we can get starved
for workers.
To determine a reasonable maximum, the maximum was increased to large
number on 5 production instances.
The number of worker threads created during startup that were
needed to avoid waiting for a thread:
HOU 1 - 71
HOU 2 - 48
OGG 1 - 60
OGG 2 - 68
OGG 3 - 64
This lead to a selection of 64 as it was reliable in all cases
and did not have a significant memory impact
* Add ozw refresh_node_info websocket api
* Remove extra unsubs definition
* Remove unused bits from refresh_node_info websocket
* Add tests
* Add unsubscribe test
* Wait for response in unsubscribe test
* Squashed
* Fix requirements_all
* Update homeassistant/components/insteon/__init__.py
Only update options if the result is to create the entry.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/insteon/__init__.py
No return value needed.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Ref RESULT_TYPE_CREATE_ENTRY correctly
* Return result back to import config process
* Make DOMAIN ref more clear
Co-authored-by: J. Nick Koston <nick@koston.org>
* Speed up OZW availability check
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Move DwdWeatherWarningsAPI to a library hosted on PyPI
PyPI library uses new DWD WFS API
WFS API allows a more detailed query with reduced data sent as return
Change CONF_REGION_NAME from Optional to Required because it was never really optional
Set attribute region_state to "N/A" because it is not available via the new API
Add attributes warning_i_parameters and warning_i_color
* Use constants instead of raw strings
Streamline methods state and device_state_attributes
* Wrap api, use UTC time
* Update homeassistant/components/dwd_weather_warnings/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/dwd_weather_warnings/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add hourly forecast
* fix tests to assert for 2 entities created
* fix test to assert for 4 calls
* correct test tracking home number of calls
* fox tests
* fix test
* Apply suggestions from code review
* black
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Fix homekit_controller pairing retry
If the device was busy on the first pairing attempt, it
was not possible to retry.
* always restart pairing on recoverable execptions
* move code
* malformed pin is safe to restart
* make busy_error an abort
* switch max retries, simplify tests
* try pairing later
* try pairing later
* merge
* s/tlv_error/protocol_error/g
* Adjust wording
* Use global CONF_UNIQUE_ID for mqtt
* Update __init__.py
* Update __init__.py
* Update __init__.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
when changing the color for a hive light, keep the brightness at the
previous level.
Co-authored-by: Adam Charlton <ad5665@live.co.uk>
Co-authored-by: Adam Charlton <ad5665@live.co.uk>
* Add missing Short type to set_config_param
* Forgot to fix the for loop
* Remove leftover return
* Guard the for loop
* Changed from if to else
* Fixed list iteration for validating input
* Adjusted per linter
* [KODI] Fix casing issue
Alexa and the Services UI on HA feeds in a media type of "channel" for media type.
The Kodi code looks for a "CHANNEL" instead, as a result the functionality fails.
* Update homeassistant/components/kodi/media_player.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update homeassistant/components/kodi/media_player.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update homeassistant/components/kodi/media_player.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update homeassistant/components/kodi/media_player.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Add more tests
* Add tests for sensor platform
* Add more tests
* More tests
* Simplify parsing of attributes
* Change Quality scale to platinum
* Patch the library in the manual update entity test
* Add unsupported condition icon test
* Do not patch _async_get_data
* Apply suggestions from code review
* Update config_flow.py
* Apply suggestions from code review
* Apply suggestions from code review
* Apply suggestions from code review
* Update tests/components/accuweather/test_weather.py
* Apply suggestions from code review
* Add return_value
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
Support the action.devices.commands.mute intent to mute and unmute
media_players that declare support for mute/unmute.
For media players with support for volume up/down, but no support for
setting the volume to a specific number, allow use of the
action.devices.commands.relativeMute intent to control volume up/down.
This will improve support for IR blasters and other open-loop
media_player integrations.
Pre calc domain when an entity id created to avoid
having to call the property method which had to call
split_entity_id every time. If there are a lot of
zone related automations, async_active_zone can call
async_entity_ids frequently which results in 100000s
of split_entity_id via the domain property every
second.
* Make sure groups are initialized before template sensors
This way users may use the `expand` function in templates to expand
groups and have HA listen for changes to group members.
Fixes#35872
* Patch async_setup_platform instead of async_setup
* Cleanup
* Use an event to avoid sleep
* Update tests/components/template/test_sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Don't set SUPPORT_EFFECT on DemoLight if there are no effects
This requires an update to the group test - previously the other lights
instantiated by the DemoLight component had nothing in ATTR_EFFECT_LIST, but
still had SUPPORT_EFFECT set. This appears to have resulted in the light
group test code setting an effect on the group and expecting it to apply to
all lights, but given that two of the bulbs didn't actually support any
effects (due to the empty ATTR_EFFECT_LIST) this seems like a broken
assumption and updating the test to verify only the bulb that supports
effects has had one applied seems reasonable.
* Add support for exposing light effects via Google Assistant
The LightEffects trait only supports a fixed (and small) list of lighting
effects, but we can expose them via the Modes trait - this requires saying
"Set (foo) effect to (bar)" which is a little clumsy, but at least makes it
possible.
* added device classes for electrical measurement
(cherry picked from commit 2409fe19ed43bef568a0cca826652867d3a2d71a)
* upadte power factor unit (%)
* update power factor unit (%)
* Add support for reload_on_update to _abort_if_unique_id_configured
async_update_entry now avoids firing update listeners and writing
the storage if there are no actual changes.
* Actually add the tests
* collapse branch
* Update homeassistant/config_entries.py
Co-authored-by: Franck Nijhof <git@frenck.dev>
* handle entries that lack the ability to reload
* reduce
* adjust konnected tests
* update axis tests
* fix blocking
* more mocking
* config flow tests outside of test_config_flow
* reduce
* volumio
* Update homeassistant/config_entries.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* set reload_on_update=False for integrations that implement self._abort_if_unique_id_configured(updates= and a reload listen
* get rid of copy
* revert test change
Co-authored-by: Franck Nijhof <git@frenck.dev>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
```
2020-08-07 22:38:10 ERROR (MainThread) [homeassistant.components.websocket_api.http.connection.3903193064] local variable 'response' referenced before assignment
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/rest_command/__init__.py", line 115, in async_service_handler
async with getattr(websession, method)(
File "/usr/local/lib/python3.8/site-packages/aiohttp/client.py", line 1012, in __aenter__
self._resp = await self._coro
File "/usr/local/lib/python3.8/site-packages/aiohttp/client.py", line 582, in _request
break
File "/usr/local/lib/python3.8/site-packages/aiohttp/helpers.py", line 586, in __exit__
raise asyncio.TimeoutError from None
asyncio.exceptions.TimeoutError
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/websocket_api/commands.py", line 125, in handle_call_service
await hass.services.async_call(
File "/usr/src/homeassistant/homeassistant/core.py", line 1281, in async_call
task.result()
File "/usr/src/homeassistant/homeassistant/core.py", line 1316, in _execute_service
await handler.func(service_call)
File "/usr/src/homeassistant/homeassistant/components/rest_command/__init__.py", line 137, in async_service_handler
_LOGGER.warning("Timeout call %s", response.url, exc_info=1)
UnboundLocalError: local variable 'response' referenced before assignment
```
* Update Tesla to use DataUpdateCoordinator
* Update Tesla to use DataUpdateCoordinator
* Fix linting errors
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Address requested changes
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Fix lint errors
* Remove controller from hass.data
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Automatically switch between resume and start playing
* Fix Black issue
Weirdly when i run it i had an error `1544 files left unchanged, 3313 files failed to reformat.`
I didn't watch the commit check output afterward.
* track all settings and add service to update a setting
* sort setting types
* reduce frequency of updates due to the increase in API calls per update
* change dict call to a get in case audio settings aren't available
unlikely to occur but less error prone
* Update if statement to be more consistent
* revert changes to track all settings and store in state machine
* revert one more change
* force setting_type and setting_name to lowercase to make it easier to understand how to make service call
* make service calls even simpler by attempting to transform certain parameters as much as possible
* Support Next/Previous for InputSelector
* Update homeassistant/components/google_assistant/trait.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Adjust to match new version of _next_selected
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
"description":"Si necessites ajuda amb la configuraci\u00f3, consulta: https://www.home-assistant.io/integrations/accuweather/ \n\n La previsi\u00f3 meteorol\u00f2gica no est\u00e0 habilitada de manera predeterminada. Pots activar-la en les opcions de la integraci\u00f3.",
"description":"Si necessites ajuda amb la configuraci\u00f3, consulta els seg\u00fcent enlla\u00e7: https://www.home-assistant.io/integrations/accuweather/ \n\n Alguns sensors no estan activats de manera predeterminada. Els pots activar des del registre d'entitats, despr\u00e9s de la configurraci\u00f3 de la integraci\u00f3.\n La previsi\u00f3 meteorol\u00f2gica no est\u00e0 activada de manera predeterminada. Pots activar-la en les opcions de la integraci\u00f3.",
"single_instance_allowed":"Sidumine juba tehtud. V\u00f5imalik on ainult 1 sidumine,"
},
"error":{
"cannot_connect":"\u00dchendus eba\u00f5nnestus",
"invalid_api_key":"API v\u00f5ti on vale",
"requests_exceeded":"Accuweatheri API-le esitatud p\u00e4ringute piirarv on \u00fcletatud. Peate ootama (v\u00f5i muutma API v\u00f5tit)."
},
"step":{
"user":{
"data":{
"api_key":"API v\u00f5ti",
"latitude":"Laiuskraad",
"longitude":"Pikkuskraad",
"name":"Sidumise nimi"
},
"description":"Kui vajate seadistamisel abi vaadake siit: https://www.home-assistant.io/integrations/accuweather/ \n\n M\u00f5ni andur pole vaikimisi lubatud. P\u00e4rast sidumise seadistamist saate need \u00fcksused lubada. \n Ilmapennustus pole vaikimisi lubatud. Saate selle lubada sidumise s\u00e4tetes.",
"title":"AccuWeather"
}
}
},
"options":{
"step":{
"user":{
"data":{
"forecast":"Ilmateade"
},
"description":"AccuWeather API tasuta versioonis toimub ilmaennustuse lubamisel andmete v\u00e4rskendamine iga 32 minuti asemel iga 64 minuti j\u00e4rel.",
"single_instance_allowed":"D\u00e9j\u00e0 configur\u00e9. Une seule configuration possible."
},
"error":{
"cannot_connect":"\u00c9chec de connexion",
"invalid_api_key":"Cl\u00e9 API invalide",
"requests_exceeded":"Le nombre autoris\u00e9 de requ\u00eates adress\u00e9es \u00e0 l'API AccuWeather a \u00e9t\u00e9 d\u00e9pass\u00e9. Vous devez attendre ou modifier la cl\u00e9 API."
},
"step":{
"user":{
"data":{
"api_key":"Cl\u00e9 d'API",
"latitude":"Latitude",
"longitude":"Longitude",
"name":"Nom de l'int\u00e9gration"
},
"description":"Si vous avez besoin d'aide pour la configuration, consultez le site suivant : https://www.home-assistant.io/integrations/accuweather/\n\nCertains capteurs ne sont pas activ\u00e9s par d\u00e9faut. Vous pouvez les activer dans le registre des entit\u00e9s apr\u00e8s la configuration de l'int\u00e9gration.\nLes pr\u00e9visions m\u00e9t\u00e9orologiques ne sont pas activ\u00e9es par d\u00e9faut. Vous pouvez l'activer dans les options d'int\u00e9gration.",
"description":"En raison des limitations de la version gratuite de la cl\u00e9 API AccuWeather, lorsque vous activez les pr\u00e9visions m\u00e9t\u00e9orologiques, les mises \u00e0 jour des donn\u00e9es seront effectu\u00e9es toutes les 64 minutes au lieu de toutes les 32 minutes.",
"requests_exceeded":"Dozwolona liczba zapyta\u0144 do interfejsu API Accuweather zosta\u0142a przekroczona. Musisz poczeka\u0107 lub zmieni\u0107 klucz API."
"requests_exceeded":"Dozwolona liczba zapyta\u0144 do interfejsu API AccuWeather zosta\u0142a przekroczona. Musisz poczeka\u0107 lub zmieni\u0107 klucz API."
"description":"Devido \u00e0s limita\u00e7\u00f5es da vers\u00e3o gratuita da chave da API AccuWeather, quando voc\u00ea habilita a previs\u00e3o do tempo, as atualiza\u00e7\u00f5es de dados ser\u00e3o realizadas a cada 64 minutos em vez de a cada 32 minutos."
"adguard_home_addon_outdated":"Aquesta integraci\u00f3 necessita la versi\u00f3 d'AdGuard Home {minimal_version} o una superior, tens la {current_version}. Actualitza el complement de Hass.io d'AdGuard Home.",
"adguard_home_outdated":"Aquesta integraci\u00f3 necessita la versi\u00f3 d'AdGuard Home {minimal_version} o una superior, tens la {current_version}.",
"existing_instance_updated":"S'ha actualitzat la configuraci\u00f3 existent.",
"single_instance_allowed":"Nom\u00e9s es permet una \u00fanica configuraci\u00f3 d'AdGuard Home."
"adguard_home_addon_outdated":"Denne integration kr\u00e6ver AdGuard Home {minimal_version} eller h\u00f8jere, du har {current_version}. Opdater venligst din Hass.io AdGuard Home-tilf\u00f8jelse.",
"adguard_home_outdated":"Denne integration kr\u00e6ver AdGuard Home {minimal_version} eller h\u00f8jere, du har {current_version}.",
"adguard_home_addon_outdated":"Diese Integration erfordert AdGuard Home {minimal_version} oder h\u00f6her, du hast {current_version}. Bitte aktualisiere dein Hass.io AdGuard Home Add-on.",
"adguard_home_outdated":"Diese Integration erfordert AdGuard Home {minimal_version} oder h\u00f6her, du hast {current_version}.",
"existing_instance_updated":"Bestehende Konfiguration wurde aktualisiert.",
"single_instance_allowed":"Es ist nur eine einzige Konfiguration von AdGuard Home zul\u00e4ssig."
"adguard_home_addon_outdated":"This integration requires AdGuard Home {minimal_version} or higher, you have {current_version}. Please update your Hass.io AdGuard Home add-on.",
"adguard_home_outdated":"This integration requires AdGuard Home {minimal_version} or higher, you have {current_version}.",
"adguard_home_addon_outdated":"Esta integraci\u00f3n requiere AdGuard Home {minimal_version} o superior, tiene {current_version}. Actualice su complemento Hass.io AdGuard Home.",
"adguard_home_outdated":"Esta integraci\u00f3n requiere AdGuard Home {minimal_version} o superior, tiene {current_version}.",
"existing_instance_updated":"Se actualiz\u00f3 la configuraci\u00f3n existente.",
"single_instance_allowed":"Solo se permite una \u00fanica configuraci\u00f3n de AdGuard Home."
"adguard_home_addon_outdated":"Esta integraci\u00f3n requiere AdGuard Home {minimal_version} o superior, usted tiene {current_version}. Por favor, actualice su complemento Hass.io AdGuard Home.",
"adguard_home_outdated":"Esta integraci\u00f3n requiere AdGuard Home {minimal_version} o superior, usted tiene {current_version}.",
"existing_instance_updated":"Se ha actualizado la configuraci\u00f3n existente.",
"single_instance_allowed":"S\u00f3lo se permite una \u00fanica configuraci\u00f3n de AdGuard Home."
"adguard_home_addon_outdated":"Cette int\u00e9gration n\u00e9cessite AdGuard Home {minimal_version} ou une version ult\u00e9rieure, vous disposez de {current_version}. Veuillez mettre \u00e0 jour votre compl\u00e9ment Hass.io AdGuard Home.",
"adguard_home_outdated":"Cette int\u00e9gration n\u00e9cessite AdGuard Home {minimal_version} ou une version ult\u00e9rieure, vous disposez de {current_version}.",
"existing_instance_updated":"La configuration existante a \u00e9t\u00e9 mise \u00e0 jour.",
"single_instance_allowed":"Une seule configuration d'AdGuard Home est autoris\u00e9e."
"adguard_home_addon_outdated":"Questa integrazione richiede AdGuard Home {minimal_version} o versione successiva, si dispone di {current_version}. Aggiorna il componente aggiuntivo AdGuard Home di Hass.io.",
"adguard_home_outdated":"Questa integrazione richiede AdGuard Home {minimal_version} o versione successiva, si dispone di {current_version}.",
"adguard_home_addon_outdated":"D\u00ebs Integratioun ben\u00e9idegt AdgGuard Home {minimal_version} oder m\u00e9i, dir hutt {current_version}. Aktualis\u00e9iert w.e.g. \u00e4ren Hass.io AdGuard Home Add-on.",
"adguard_home_outdated":"D\u00ebs Integratioun ben\u00e9idegt AdgGuard Home {minimal_version} oder m\u00e9i, dir hutt {current_version}.",
"existing_instance_updated":"D\u00e9i bestehend Konfiguratioun ass ge\u00e4nnert.",
"single_instance_allowed":"N\u00ebmmen eng eenzeg Konfiguratioun vun AdGuard Home ass erlaabt."
"adguard_home_addon_outdated":"Deze integratie vereist AdGuard Home {minimal_version} of hoger, u heeft {current_version}. Update uw Hass.io AdGuard Home-add-on.",
"adguard_home_outdated":"Deze integratie vereist AdGuard Home {minimal_version} of hoger, u heeft {current_version}.",
"adguard_home_addon_outdated":"Denne integrasjonen krever AdGuard Home {minimal_version} eller h\u00f8yere, du har {current_version}. Vennligst oppdater Hass.io AdGuard Home-tillegget.",
"adguard_home_outdated":"Denne integrasjonen krever AdGuard Home {minimal_version} eller h\u00f8yere, du har {current_version}.",
"adguard_home_addon_outdated":"Za to integracijo je potrebna AdGuard Home {minimal_version} ali vi\u0161ja, vi imate {current_version}. Prosimo posodobite va\u0161 hass.io AdGuard Home dodatek.",
"adguard_home_outdated":"Za to integracijo je potrebna AdGuard Home {minimal_version} ali vi\u0161ja, vi imate {current_version}.",
"adguard_home_addon_outdated":"Den h\u00e4r integrationen kr\u00e4ver AdGuard Home {minimal_version} eller senare, du har {current_version}. Uppdatera ditt Hass.io AdGuard Home-till\u00e4gg.",
"adguard_home_outdated":"Den h\u00e4r integrationen kr\u00e4ver AdGuard Home {minimal_version} eller senare, du har {current_version}.",
"adguard_home_addon_outdated":"\u6574\u5408\u9700\u8981 AdGuard Home {minimal_version} \u6216\u66f4\u65b0\u7248\u672c\uff0c\u60a8\u76ee\u524d\u4f7f\u7528\u7248\u672c\u70ba {current_version}\u3002\u8acb\u66f4\u65b0 Hass.io AdGuard Home \u5143\u4ef6\u3002",
"adguard_home_outdated":"\u6574\u5408\u9700\u8981 AdGuard Home {minimal_version} \u6216\u66f4\u65b0\u7248\u672c\uff0c\u60a8\u76ee\u524d\u4f7f\u7528\u7248\u672c\u70ba {current_version}\u3002",
"ip_address":"Adresse IP / nom d'h\u00f4te de l'unit\u00e9",
"password":"Mot de passe de l'unit\u00e9"
"password":"Mot de passe"
},
"description":"Surveillez une unit\u00e9 AirVisual personnelle. Le mot de passe peut \u00eatre r\u00e9cup\u00e9r\u00e9 dans l'interface utilisateur de l'unit\u00e9.",
"title":"Configurer un AirVisual Node/Pro"
@@ -32,7 +32,7 @@
"node_pro":"AirVisual Node Pro",
"type":"Type d'int\u00e9gration"
},
"description":"Surveiller la qualit\u00e9 de l\u2019air dans un emplacement g\u00e9ographique.",
"description":"Choisissez le type de donn\u00e9es AirVisual que vous souhaitez surveiller.",
@@ -95,6 +100,7 @@ class AlarmDecoderAlarmPanel(AlarmControlPanelEntity):
self._zone_bypassed=None
self._auto_bypass=auto_bypass
self._code_arm_required=code_arm_required
self._alt_night_mode=alt_night_mode
asyncdefasync_added_to_hass(self):
"""Register callbacks."""
@@ -180,11 +186,11 @@ class AlarmDecoderAlarmPanel(AlarmControlPanelEntity):
defalarm_disarm(self,code=None):
"""Send disarm command."""
ifcode:
self.hass.data[DATA_AD].send(f"{code!s}1")
self._client.send(f"{code!s}1")
defalarm_arm_away(self,code=None):
"""Send arm away command."""
self.hass.data[DATA_AD].arm_away(
self._client.arm_away(
code=code,
code_arm_required=self._code_arm_required,
auto_bypass=self._auto_bypass,
@@ -192,7 +198,7 @@ class AlarmDecoderAlarmPanel(AlarmControlPanelEntity):
defalarm_arm_home(self,code=None):
"""Send arm home command."""
self.hass.data[DATA_AD].arm_home(
self._client.arm_home(
code=code,
code_arm_required=self._code_arm_required,
auto_bypass=self._auto_bypass,
@@ -200,18 +206,19 @@ class AlarmDecoderAlarmPanel(AlarmControlPanelEntity):
defalarm_arm_night(self,code=None):
"""Send arm night command."""
self.hass.data[DATA_AD].arm_night(
self._client.arm_night(
code=code,
code_arm_required=self._code_arm_required,
alt_night_mode=self._alt_night_mode,
auto_bypass=self._auto_bypass,
)
defalarm_toggle_chime(self,code=None):
"""Send toggle chime command."""
ifcode:
self.hass.data[DATA_AD].send(f"{code!s}9")
self._client.send(f"{code!s}9")
defalarm_keypress(self,keypress):
"""Send custom keypresses."""
ifkeypress:
self.hass.data[DATA_AD].send(keypress)
self._client.send(keypress)
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Paulus Schoutsen
Raman Gupta
J. Nick Koston
Franck Nijhof
Justin Paupore
Simone Chemelli
Rohan Kapoor
Alexei Chetroi
Baptiste Candellier
Samantha
Marius
jjlawren
Bram Kragten
Aaron Bach
cgtobi
Chris
Robert Svensson
Daniel Hjelseth Høyer
Quentame
uvjustin
Chris Reichel
Martin Hjelmare
MatthewFlamm
Maikel Punie
Mike O'Driscoll
Thibaut
Guido Schmitz
Marvin Wichmann
epenet
HomeAssistant Azure
David F. Mulcahey
Richard van Duijn
MatsNl
Chris Talkington
Bashir
Erik Montnemery
Fabrice Pipart
Ville Skyttä
Andre Lengwenus
Jeff Irion
RichieFrame
Paweł Stankowski
Chris
Jason Hunter
Bouwe Westerdijk
Colin Frei
Maciej Bieniek
Matt Black
Joakim Sørensen
Alex
jan iversen
puddly
Adam Król
stephan192
tkdrob
Melvin
Marcio Granzotto Rodrigues
Julius Mittenzwei
Vladimír Záhradník
Felipe Martins Diel
SNoof85
Rob Bierbooms
Daniel Kucera
Oliver Acevedo
Angelo Gagliano
Joakim Plate
Kevin Cathcart
Steven Looman
cagnulein
Anders Melchiorsen
Robert Van Gorkom
square99
MeIchthys
Pedro Lamas
jan iversen
Michael Thingnes
On Freund
Tom Harris
Markus Haack
Harrison Pace
Martin Eberhardt
Ari Simonen
Dermot Duffy
Eugene Prystupa
springstan
Philip Allgaier
Tomasz
nagyrobi
lamiskin
Tom Schneider
Adam Belebczuk
Perry Naseck
Bas Nijholt
Brett
Robin Wohlers-Reichel
Julien Tant
Finbarr Brady
Josef Schlehofer
Daniel Shokouhi
SukramJ
Ian Duffy
Tom
Greg Badros
twdkeule
timkoers
Chris Caron
Markus Bong
Daniel de Jong
Niccolo Zapponi
Jesse Hills
Shay Levy
Diogo Gomes
AJ Schmidt
Dan Klaffenbach
Hareesh M U
Pascal Vizeli
Jc2k
Evgeny
b3nj1
r4nd0mbr1ck
Xiaonan Shen
rajlaud
Thomas Germain
Aidan Timson
Greg Dowling
Jakob Schlyter
Thomas Lovén
bsmappee
RogerSelwyn
Sören Oldag
Martin
Franchie
Emilv2
Andreas Rehn
Bas Nijholt
Marijn Pool
pbalogh77
Andrew Marks
fillefilip8
kennedyshead
Egor Shilyaev
Keilin Bickar
Nishchith Shetty
Charles Garwood
Bjørn Snoen
Oscar Calvo
Hmmbob
Michał Węgrzynek
Eric Severance
starkillerOG
Tomer Figenblat
Hendrik Schröter
Ziv
Olivér Falvai
Phil Bruckner
Paolo Antinori
Arda ŞEREMET
Jean-Yves Avenard
Tom Brien
jdelaney72
Emily Mills
Stefan Lehmann
arunderwood
Denys Dovhan
Berni Moses
Aaron Godfrey
Teemu R
Anna Tikhomirova
Jin
Bill (William) O'Neill
jgrob1
Paul Daumlechner
Oncleben31
matgad
João Gabriel
Fabian Affolter
Marty Zalega
Yuxiang Zhu
javicalle
Akın Ömeroğlu
Leonardo Figueiro
Ernst Klamer
Lukas
Paul Madden
Fritiof Hedman
J.P. Hutchins
ktownsend-personal
Sean Mooney
Graham Wetzler
Markus Bong
thrust15
Andrey Kupreychik
James Hilliard
Ivan Belokobylskiy
lawtancool
Brian Rogers
Farid
dependabot[bot]
endor
Thomas Delaet
Kit Klein
tizzen33
automaton82
Dennis Gilmore
escoand
indykoning
Fredrik Erlandsson
Erik J. Olson
Niels Mündler
sean tearney
Vitalii Martyniak
etheralm
Yehuda Davis
Eliseo Martelli
Vaclav
Andrew Sayre
Markus Haack
Michaël Arnauts
Arto Jantunen
Alex Ward
Eugenio Panadero
Alan Tse
Justin Paupore
Thomas Hollstegge
Matthew Garrett
fabiocastagnino
michaeldavie
Alejandro Rivera
Vaarlion
Ole-Martin Heggen
Austin Drummond
Kendell R
DelusionalAI
Dave Clarke