3.0 KiB
First experimental release: RouterOS 7.25.1 / ARM
This release is for experiments on spare hardware. It is not a finished native OLSR subsystem. It includes own-key Linux and Windows Netinstall, a patched RouterOS system package, an optional re-signed Wi-Fi package, a minimal option runtime and an OLSRv1 package with a local BGP bridge.
Tested on a hAP ac2
- Own-key Netinstall and subsequent package-only updates booted successfully.
- The original RouterOS license remained at level 4.
- OLSRv1 discovered symmetric neighbors on a VLAN with a /32 node address.
- Around 700 active dynamic routes appeared in RouterOS through loopback BGP.
- Neighbor ping succeeded. Broader forwarding, throughput, failover and long-term operation have not been validated.
- Disabling the OLSR scheduler removed native and private OLSR routes within approximately eight seconds; re-enabling restored neighbor discovery/routes.
- Free flash with routeros + option + olsr was approximately 1.34 MiB. The Wi-Fi package was not included in this measurement and is not a tested fit.
Native UI status
An experimental OLSR > Service table provides native enable/disable controls in Winbox/WebFig. It currently uses a scheduler heartbeat internally. It does not restart olsrd on every heartbeat. Interface/address and accepted-prefix settings are configured using configure-device.py for now. Native settings windows, HNA advertisement controls, and native live logs are unfinished. HNA advertisements are blocked in this release. Logs can be read using the setup tool and remain in bounded RAM buffers. The separate development web page has been removed.
An earlier experimental UI descriptor caused Winbox crashes and is not included. The reduced service descriptor appeared successfully on the test router. Native UI compatibility across other Winbox versions is not established.
Scope and limitations
Only ARM on the tested hAP ac2 has hardware validation. cAP ac hardware is a candidate, not a tested target. There is currently one OLSR interface. The default accepted network is 10.0.0.0/8; additional explicitly selected IPv4 networks can be configured. Default route import is excluded. BGP sessions remain on loopback and export no RouterOS routes back to OLSR. Tables 201/202/203 and kernel protocol 100 are reserved for OLSR; do not use them for other routing configuration.
Normal stop and heartbeat-expiry cleanup were tested. Full crash/reboot/link-loss coverage is incomplete. Unexpected supervisor termination can leave private kernel routes until restart/reboot, although the BGP session withdrawal removes the native routes. BIRD logs include a RouterOS address-notification warning; neighbor discovery and route import worked despite it. Hardware offload and routing-policy interactions have not been validated.
Read INSTALL.md before installing. Use all packages from the same signing keyset and RouterOS version. Do not force installation when Netinstall reports insufficient space. The downloadable Wi-Fi package is optional, not an assurance that all packages fit a 16 MiB device.