Commit Graph
193 Commits
Author SHA1 Message Date
Juan Miguel Olmo Martínez 7fbd9f2225 ceph: do not use http for mgr liveness probe
When private/public network have been defined in the Ceph rook cluster it is not
possible to configure properly the ip address of the liveness probe
for the manager.
Changes in the manager in Pacific introduced this regression.

This change replaces the http probe by a command probe, avoiding thus to
determine what is going to be the ip address of the manager before launching
the pod.

fixes: https://github.com/rook/rook/issues/8510

Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
2021-09-20 13:28:51 +00:00
Sébastien Han b89730d895 ceph: refactor operator initialization sequence
This commit is a large refactor on how the operator starts, stops and
how it starts various sub-components such as the ceph-csi driver. It
also refines the way we cancel orchestrations. We don't use breakpoints
anymore but send our self a SIGUP to reload our controller runtime
manager.
The reload will happen under different circonstances like:

* a new adminission controller secret is created/deleted/changed
* a CephCluster CR is edited

As mentioned earlier, the csi driver now has its own controller, just
like flex. It reacts to change in the operator config map for particular
ROOK_CSI_ fields.

A second new controller for the operator's general config has been
created, it manages:

* the logging level
* the ceph CLI command timeout
* the discovery daemon

The operator reacts much more rapidly to cancellation events by stopping
the manager's context and reloading it.

Signed-off-by: Sébastien Han <seb@redhat.com>
2021-09-17 16:57:12 +02:00
parth-gr e50d83771e ceph: add pdb for mgr
Currently PDB for MGR is not been created,
Creating the PDB for MGR if its count is 2

Closes: https://github.com/rook/rook/issues/8275
Signed-off-by: parth-gr <paarora@redhat.com>
2021-09-03 14:30:58 +05:30
Sébastien Han d4dd0577f9 Merge pull request #8529 from sp98/id-mapping
ceph: add ClusterID and PoolID mappings between local and peer cluster
2021-08-31 17:32:14 +02:00
Santosh Pillai 3f8abec403 ceph: add ClusterID and PoolID mappings between local and peer cluster
During disaster recovery/migration of a cluster, as part of the failover, the
kubernetes artifacts like deployment, PVC, PV, etc will be restored to a new
cluster by the admin. Even if the kubernetes objects are restored the
corresponding RBD/CephFS subvolume cannot be retrieved during CSI operations as
the clusterID and poolID are not the same in both clusters

This PR creates a mapping between Cluster ID and RBD Pool ID between
local cluster and peer cluster.

Signed-off-by: Santosh Pillai <sapillai@redhat.com>
2021-08-31 20:08:56 +05:30
Travis Nielsen cdfe1982d1 ceph: consolidate the calls to set mon config
The mon config had two different implementations that have evolved
over the lifetime of the project. This is a simple refactor to remove
the SetConfig() option and stick with the MonStore as a single
implementation for updating the mon store.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-08-24 14:38:26 -06:00
Travis Nielsen 8304303120 Merge pull request #8355 from anmolsachan/add_metric_label
ceph: added monitoring managedBy label to metrics
2021-07-30 07:28:42 -06:00
Anmol Sachan c6944edc37 ceph: added monitoring managedBy label to metrics
This commit adds 'managedBy' label to the ceph metrics if the
cephcluster is managed by another higher Resource. The optional
label shall be added as part of cephcluster CRs monitoring labels.

Signed-off-by: Anmol Sachan <anmol13694@gmail.com>
2021-07-30 11:41:33 +05:30
Travis Nielsen f5030f0560 ceph: remove old references to mimic version
References to luminous and mimic, and unnecessary references to nautilus
were found in the docs that have been cleaned up and clarified. At the same
time, the tests are updated to use more recent versions.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-07-28 14:00:35 -06:00
Satoru Takeuchi 30e4fbb01f ceph: make the timeout of ceph commands cofigurable
Sometimes the default 15s is not enough for timeout of ceph commands. For examples,
I encountered that `radosgw-admin` command took dozens of seconds under heavy load.

Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
2021-07-27 12:42:16 +00:00
Sébastien Han d55fb8d13b Merge pull request #8351 from leseb/refact-exec-helpers
ceph: remove unnecessary exec helpers
2021-07-23 18:12:57 +02:00
Sébastien Han 6d77a9976c ceph: remove unnecessary exec helpers
Both `ExecuteCommandWithOutputFileTimeout()` and
`ExecuteCommandWithOutputFile()` generate unnecessary system calls by
creating/reading/removing files where the stream output of the command
can simply be used. So sticking with `ExecuteCommandWithOutput()` and
`ExecuteCommandWithCombinedOutput()` for reading outputs is sufficient.

Closes: https://github.com/rook/rook/issues/8343
Signed-off-by: Sébastien Han <seb@redhat.com>
2021-07-23 09:16:33 +02:00
Sébastien Han 6bce1ff3e9 ceph: move all of our docker.io reference to quay.io
Recently, the builds of `ceph/ceph` image moved to quay.io, see
https://github.com/ceph/ceph-build/pull/1883 for more details.
Current images will remain but new builds will happen on quay.io only.

This means that tags such as `v14.2`, `v15.2`,`v16.2` will need to
switch to quay.io to get updates.

Signed-off-by: Sébastien Han <seb@redhat.com>
2021-07-22 11:17:05 +02:00
Travis Nielsen 552a67bc3e Merge pull request #8330 from travisn/reconcile-mgr-services
ceph: Reconcile mgr services with every reconcile
2021-07-20 08:19:17 -06:00
Travis Nielsen 107f89260d ceph: reconcile mgr services with every reconcile
When there are multiple mgr daemons, the mgr sidecar owns reconciling
the services for the active mgr. However, for efficiency the sidecar
only reconciles the services if the active mgr changes. Now the operator
will also reconcile the mgr services to ensure that services are re-created
after being deleted, or otherwise in an incorrect state.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-07-20 07:23:58 -06:00
Sébastien Han 1900160939 ceph: proxy rbd commands when multus is enabled
We now pass the networking spec to the clusterInfo so that the executor
can make the right decision on how to execute a command.
This is a small change that allows us to remove the CephBlockPool CR
since it's checking for rbd images. On a Multus deployment, the operator
does not have the network annotations, thus has no access to the OSD
network then rbd commands are hanging forever.

Signed-off-by: Sébastien Han <seb@redhat.com>
2021-07-20 12:28:00 +02:00
Sébastien Han bd58790c31 ceph: proxy ceph commands when multus is configured
When the CephCluster is configured with Multus and multiple networks are
used to deploy Ceph some commands are failing to be executed from the
Operator. These commands, in particular, `radosgw-admin` ones need access
to the "ceph public network" to talk to OSDs. Unfortunately, the
Rook-Ceph Operator does not have the network annotations and thus
doesn't have the networks available and cannot reach OSDs. So the commands end
up hanging and eventually time out.
Applying the annotations to the Operator pod is possible but will result
in restarting the operator too and this should be avoided at all costs.
Also, applying the annotations beforehand is not possible since the
Multus declaration is in the CephCluster specification. So we would have
no idea what to do.

So the current approach runs a new sidecar container in the mgr pod to
act as a proxy for "some" ceph commands, only the `radosgw-admin` ones
for multi-site setup. This is a small container with admin access
running idle waiting for commands to be executed. In a sense, it is
similar to the toolbox but we didn't want to clearly expose it, so
running as a sidecar is quite nice.

Proxying command is obviously not always recommended since we add an
extra hop in the network path. Now each request has to go from the
operator pod to the API server to the remote pod to Ceph. Previously,
the command only goes from the operator to Ceph.

It's worth noting that external mode is not impacted since no rgw pod
is configured. This scenario is flexible and allows us to scale
pretty well since any CephCluster with Multus will see its mgr sidecar
deployed and can then talk to Ceph. We are not limited.

Signed-off-by: Sébastien Han <seb@redhat.com>
2021-07-07 19:08:32 +02:00
Travis Nielsen b1f4411fb4 ceph: disable insecure global id if no insecure clients
In the latest Ceph releases starting with v16.2.1, all clients are recommended
to be updated so they will have a security fix to connect with a secure
global ID. A health warning will be raised if any insecure clients are connected
and another health warning is raised if insecure clients are still allowed.
Rook will now disable allowing the insecure clients if the health warning
is not being raised to indicate that there are insecure clients still connected.
This means that upgraded clusters will not have this disabled until all the
daemons are updated.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-06-10 10:05:30 -06:00
Travis Nielsen b0a63711f5 build: refactor to consolidate the rook.io/v1 package
The rook.io/v1 package was only an internal implementation detail and
does not have any CRDs that rely on it. The CRD deserialization should
handle the change in internal types without any issue. This separation
gives more flexibility for the storage providers to implement exactly
what is needed for their storage provider instead of forcing to use the
same types and risk affecting another storage provider.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-05-18 19:55:37 -06:00
Sébastien Han 5e1e9f4c92 ceph: actively update the service endpoint for external mgr
If the cluster is external we want to periodically rehydrate the mgr
endpoint. This handles the scenarion where the active manager changes,
 so we need to update the endpoint with the new IP address.
The create-external-cluster-resources.py script now requires an extra
permission to query the manager service so Rook can discover the active
one and its IP.

Testing:

```
[leseb@tarox~/go/src/github.com/rook/rook][external-active-mgr-change] minikube kubectl -- exec -n rook-ceph deploy/rook-ceph-tools -ti -- ceph mgr stat
{
    "epoch": 37,
    "available": true,
    "active_name": "b",
    "num_standby": 1
}

[leseb@tarox~/go/src/github.com/rook/rook][external-active-mgr-change] kubectl -n rook-ceph-external get ep
NAME                     ENDPOINTS          AGE
rook-ceph-mgr-external   172.17.0.12:9283   3m10s

[leseb@tarox~/go/src/github.com/rook/rook][external-active-mgr-change] k scale --replicas=0 deployment rook-ceph-mgr-b
deployment.apps/rook-ceph-mgr-b scaled

[leseb@tarox~/go/src/github.com/rook/rook][external-active-mgr-change] minikube kubectl -- exec -n rook-ceph deploy/rook-ceph-tools -ti -- ceph mgr stat
{
    "epoch": 40,
    "available": true,
    "active_name": "a",
    "num_standby": 0
}

[leseb@tarox~/go/src/github.com/rook/rook][external-active-mgr-change] kubectl -n rook-ceph-external get ep
NAME                     ENDPOINTS          AGE
rook-ceph-mgr-external   172.17.0.13:9283   3m55s
```

Signed-off-by: Sébastien Han <seb@redhat.com>
2021-05-11 16:08:40 +02:00
Satoru Takeuchi 709e8d5ba8 ceph: unity timeout values of commands
There is no strong reason to have different timeout values.

Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
2021-04-26 12:57:40 +00:00
subhamkrai 4eb08bb508 ceph: remove unnecessary use of formating
remove unnecessary use of formating.

Signed-off-by: subhamkrai <srai@redhat.com>
2021-04-15 17:32:46 +05:30
subhamkrai 30cc7c7eb6 ceph: update ceph dashboard credential command
in the latest ceph releases, there are
few changes in ceph commands to access
ceph dashboard. This commit update
ceph dashboard credentials command.

Older command
```
ceph dashboard set-login-credentials <username> <password>
```
New command
```
ceph dashboard ac-user-create <username> -i <file-containing-password> administrator
```

Signed-off-by: subhamkrai <srai@redhat.com>
2021-04-15 17:32:37 +05:30
Lars Lehtonen 600a1498fe ceph: fix multiple imports
This fixes double imports within and beneath pkg/operator/ceph/cluster.

Signed-off-by: Lars Lehtonen <lars.lehtonen@gmail.com>
2021-04-14 01:51:35 -07:00
Umanga Chapagain 68c2db5d3a ceph: add monitoring key to cephcluster.spec.labels
CephCluster.Spec.Labels takes a key "monitoring". This is used
to inject labels into all the monitoring resources created by
the Rook operator.

Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
2021-04-12 12:02:27 +05:30
Satoru Takeuchi 9eb3160d8b ceph: validate all owner references
Remaining work of #7259

Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
2021-03-26 06:43:54 +00:00
Travis Nielsen c78e6a9e20 ceph: set active mgr label on mgr services
Other resources such as the service monitor need to match
the labels on the services to the active mgr, thus the active
mgr name is now set on the labels for the metrics service
and dashboard service.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-03-18 16:37:01 -06:00
subhamkraiandTravis Nielsen 319e4a41a4 ceph: placement in case of both PVC and non-PVC's
In the case of PVC,
We are giving lower priority to all placement.
We want deviceSet placement to applied and
override in case of overlapping settings and
we are merging nodeAffinity if applied in both
all placement and deviceSet.

In case of non-PVC,
we apply spec.placement

Signed-off-by: subhamkrai <srai@redhat.com>
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
2021-03-18 10:32:57 +05:30
Satoru Takeuchi 756d4ecb89 Merge pull request #7259 from cybozu-go/ceph-improve-owner-reference-management-2
ceph: improve owner reference management
2021-03-16 20:22:57 +09:00
Satoru Takeuchi 26c8fd9bd1 ceph: improve owner reference management
It's better to validate ownerReferences when setting them. In addition, we should use
controllerrutil.Set{Controller,Owner}Reference, that have such validation, as possible.

Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
2021-03-16 10:29:33 +00:00
Sébastien Han 7291ce950e ceph: fix variable name
Fix linter complain.

Signed-off-by: Sébastien Han <seb@redhat.com>
2021-03-16 08:35:36 +01:00
Travis Nielsen 51996be952 ceph: remove extra mgr deployments if count is reduced
If the count of mgr daemons is reduced, we remove the extra one.
The check is made during each reconcile.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-03-10 08:37:18 -07:00
Travis Nielsen 38efe8ceba ceph: get active mgr with new pacific command
In Pacific the simple command to retrieve the active mgr is with
ceph mgr stat instead of retrieving the full ceph mgr dump.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-03-10 08:37:18 -07:00
Travis Nielsen a1c6a706f1 ceph: configure resources for the mgr sidecar
The mgr sidecar container has a new mgr-sidecar section
for specifying resources if desired.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-03-10 08:37:17 -07:00
Travis Nielsen e7331b0191 ceph: multiple mgrs have antiaffinity across hosts or zones
If there are multiple mgrs running, the operator will automatically
add pod antiaffinity across hosts by default. For stretch clusters,
antiaffinity across the stretch failure domain (e.g. zones)
will be added. Required antiaffinity will be created unless the
test setting allowMultiplePerNode is set to true.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-03-10 08:37:17 -07:00
Travis Nielsen 142ba63b6a ceph: enforce anti-affinity to multiple mgrs
If there are two mgr daemons, they should be running on different
hosts or zones, depending on the failure domain.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-03-10 08:37:17 -07:00
Travis Nielsen 388ff3e78b ceph: start sidecar to monitor active mgr
The mgr daemon may be failed over by ceph if the active mgr is not
responding and the standby mgr is available. If the active mgr changes
the services for the dashboard and metrics will be updated with a
label selector for the new active mgr. The services cannot direct
traffic to the standby mgr or else they will be incorrectly redirected
to the active mgr.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-03-10 08:37:17 -07:00
Travis Nielsen d93ff428ec ceph: reconcile the mgr services with the active mgr
The active mgr should match the labels on the services that
are available for prometheus and the dashboard. The selector
labels must be updated whenever there is a new active mgr.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-03-10 08:29:16 -07:00
ushen 7e691af439 ceph: allow user decide num of mgrs
Allow user to decide how many mgrs to be used
by make mgr replicas configurable

Signed-off-by: shenjiatong <yshxxsjt715@gmail.com>
2021-03-10 08:29:14 -07:00
subhamkrai 6158b6608c ceph: do not merge nodeAffinity
we don't want to merge the node affinity if specified in both
storageClassDeviceSet and placement. Now, we are passing new
boolean argument in `ApplyToPodSpec` which will be false in
case of osd and prepare pods because we don't want to overlap
placement of osd on PVC's and non-PVC's.

Signed-off-by: subhamkrai <srai@redhat.com>
2021-02-16 12:25:28 +05:30
Travis Nielsen 7dc36e0f46 ceph: use localhost for the mgr endpoint binding instead of podIP
The pod IP address is no longer needed for port binding for the dashboard
and prometheus endpoints anymore in the mgr modules. The default binding
to localhost will be sufficient. This will allow the endpoints to be more
reliable in some environments where today the podIP is not working.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-02-04 08:44:05 -07:00
Travis Nielsen b3129fd5cf ceph: bind mgr modules to all interfaces instead of pod ip
Binding the dashboard and prometheus to all interfaces instead of the pod ip
will ensure that they are listening properly. Binding to the pod ip was only
a short term solution that was intended to be removed with Nautilus, which
is already Rook's min supported version.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-02-04 07:08:59 -07:00
Sébastien Han cb7d600841 ceph: set process working dir to /var/log/ceph
By setting the working directory of a Ceph daemon to the log direcor
(which is bindmounted to the host), we can ensure that the coredumps
will be available.

On CentOS 7 **only**, the kernel is configured with:

```
cat /proc/sys/kernel/core_pattern
core
```

which means that the coredumps will end up in the process working
directory and will be named "core".

On CentOS 8, everything is different and this won't work but still
CentOS will be able to consume this and changing the working directory
is harmless.

Signed-off-by: Sébastien Han <seb@redhat.com>
2021-01-15 16:06:42 +01:00
Travis Nielsen 4ad432ffcf ceph: only restart ceph dashboard module if settings changed
If ssl was not enabled, the dashboard was being restarted with every
reconcile. Instead, the dashboard should only be restarted when
the settings have changed in order to reduce the frequency that
the dashboard is restarted.

Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
2021-01-12 16:00:13 -07:00
binoue 2ecde7c9c6 ceph: remove deplicated env value
Currently, mgr deployment has two overlapping environment variables, ROOK_POD_IP.
This causes kube-apiserver to create error logs

Signed-off-by: binoue <banji-inoue@cybozu.co.jp>
2020-12-15 09:11:26 +09:00
Sébastien Han 8aaff235bb ceph: ability to set external services ports
When the cluster is external we want to expose manager service port
along with the endpoints.
This allows us to connect but Rook will keep on using 9283 as a facing
port for Prometheus and more.

```
monitoring:
  enabled: true
  ...
  ...
  externalMgrPrometheusPort: 9283
```

Signed-off-by: Sébastien Han <seb@redhat.com>
2020-12-04 09:52:09 +01:00
Sébastien Han c6a87203ca ceph: add log collector
We can now collect logs directly into a side-car container.
A new CRD spec has been added:

spec:
  logCollector:
    enabled: true
    periodicity: 24h

Every 24h we will rotate log files for each Ceph daemon.

Signed-off-by: Sébastien Han <seb@redhat.com>
2020-12-01 16:30:17 +01:00
Sébastien Han ad24990473 ceph: ability to abort orchestration
We can now prioritize orchestrations on certain event. Today only two
events will cancel on-going orchestrations (if any):

* request for cluster deletion
* request for cluster upgrade

If one of the two are caught by the watcher we will cancel the on-going
orchestration.
For that we implemented a simple approach based on check points, where
we will check for a cancellation request in certain part of the
orchestration. Mainly before each mons/mgr/osds orchestration loops.

This solution is not perfect, but we are waiting for the
controller-runtime to release its 0.7 version which will embed context
support. With that we will be able to cancel reconciles more precisely
and rapidly.

Operator log example:

```
2020-11-24 13:54:59.499719 I | op-mon: parsing mon endpoints: a=10.109.126.120:6789
2020-11-24 13:54:59.499719 I | op-mon: parsing mon endpoints: a=10.109.126.120:6789
2020-11-25 12:59:12.986264 I | ceph-cluster-controller: done reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:33.776947 I | ceph-cluster-controller: CR has changed for "rook-ceph". diff=  v1.ClusterSpec{
        CephVersion: v1.CephVersionSpec{
                Image:            "ceph/ceph:v15.2.5",
-               AllowUnsupported: true,
+               AllowUnsupported: false,
        },
        DriveGroups: nil,
        Storage:     {UseAllNodes: true, Selection: {UseAllDevices: &true}},
        ... // 20 identical fields
  }
2020-11-25 13:07:33.777039 I | ceph-cluster-controller: reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:33.785088 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:33.788626 I | ceph-cluster-controller: detecting the ceph image version for image ceph/ceph:v15.2.5...
2020-11-25 13:07:35.280789 I | ceph-cluster-controller: detected ceph image version: "15.2.5-0 octopus"
2020-11-25 13:07:35.280806 I | ceph-cluster-controller: validating ceph version from provided image
2020-11-25 13:07:35.285888 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:35.287828 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:35.288082 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:35.621625 I | ceph-cluster-controller: cluster "rook-ceph": version "15.2.5-0 octopus" detected for image "ceph/ceph:v15.2.5"
2020-11-25 13:07:35.642688 I | op-mon: start running mons
2020-11-25 13:07:35.646323 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:35.654070 I | op-mon: saved mon endpoints to config map map[csi-cluster-config-json:[{"clusterID":"rook-ceph","monitors":["10.107.242.49:6789","10.109.71.30:6789","10.98.93.224:6789"]}] data:a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789 mapping:{"node":{"a":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"b":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"c":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"}}} maxMonId:2]
2020-11-25 13:07:35.868253 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:35.868573 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:37.074353 I | op-mon: targeting the mon count 3
2020-11-25 13:07:38.153435 I | op-mon: checking for basic quorum with existing mons
2020-11-25 13:07:38.178029 I | op-mon: mon "a" endpoint is [v2:10.107.242.49:3300,v1:10.107.242.49:6789]
2020-11-25 13:07:38.670191 I | op-mon: mon "b" endpoint is [v2:10.109.71.30:3300,v1:10.109.71.30:6789]
2020-11-25 13:07:39.477820 I | op-mon: mon "c" endpoint is [v2:10.98.93.224:3300,v1:10.98.93.224:6789]
2020-11-25 13:07:39.874094 I | op-mon: saved mon endpoints to config map map[csi-cluster-config-json:[{"clusterID":"rook-ceph","monitors":["10.107.242.49:6789","10.109.71.30:6789","10.98.93.224:6789"]}] data:a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789 mapping:{"node":{"a":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"b":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"c":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"}}} maxMonId:2]
2020-11-25 13:07:40.467999 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:40.469733 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:41.071710 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:41.078903 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:41.125233 I | op-mon: deployment for mon rook-ceph-mon-a already exists. updating if needed
2020-11-25 13:07:41.327778 I | op-k8sutil: updating deployment "rook-ceph-mon-a" after verifying it is safe to stop
2020-11-25 13:07:41.327895 I | op-mon: checking if we can stop the deployment rook-ceph-mon-a
2020-11-25 13:07:44.045644 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-a"
2020-11-25 13:07:44.045706 I | op-mon: checking if we can continue the deployment rook-ceph-mon-a
2020-11-25 13:07:44.045740 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:44.109159 I | op-mon: mons running: [a b c]
2020-11-25 13:07:44.474596 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:44.478565 I | op-mon: deployment for mon rook-ceph-mon-b already exists. updating if needed
2020-11-25 13:07:44.493374 I | op-k8sutil: updating deployment "rook-ceph-mon-b" after verifying it is safe to stop
2020-11-25 13:07:44.493403 I | op-mon: checking if we can stop the deployment rook-ceph-mon-b
2020-11-25 13:07:47.135524 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-b"
2020-11-25 13:07:47.135542 I | op-mon: checking if we can continue the deployment rook-ceph-mon-b
2020-11-25 13:07:47.135551 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:47.148820 I | op-mon: mons running: [a b c]
2020-11-25 13:07:47.445946 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:47.448991 I | op-mon: deployment for mon rook-ceph-mon-c already exists. updating if needed
2020-11-25 13:07:47.462041 I | op-k8sutil: updating deployment "rook-ceph-mon-c" after verifying it is safe to stop
2020-11-25 13:07:47.462060 I | op-mon: checking if we can stop the deployment rook-ceph-mon-c
2020-11-25 13:07:48.853118 I | ceph-cluster-controller: CR has changed for "rook-ceph". diff=  v1.ClusterSpec{
        CephVersion: v1.CephVersionSpec{
-               Image:            "ceph/ceph:v15.2.5",
+               Image:            "ceph/ceph:v15.2.6",
                AllowUnsupported: false,
        },
        DriveGroups: nil,
        Storage:     {UseAllNodes: true, Selection: {UseAllDevices: &true}},
        ... // 20 identical fields
  }
2020-11-25 13:07:48.853140 I | ceph-cluster-controller: upgrade requested, cancelling any ongoing orchestration
2020-11-25 13:07:50.119584 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-c"
2020-11-25 13:07:50.119606 I | op-mon: checking if we can continue the deployment rook-ceph-mon-c
2020-11-25 13:07:50.119619 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:50.130860 I | op-mon: mons running: [a b c]
2020-11-25 13:07:50.431341 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:50.431361 I | op-mon: mons created: 3
2020-11-25 13:07:50.734156 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:50.745763 I | op-mon: mons running: [a b c]
2020-11-25 13:07:51.045108 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:51.054497 E | ceph-cluster-controller: failed to reconcile. failed to reconcile cluster "rook-ceph": failed to configure local ceph cluster: failed to create cluster: CANCELLING CURRENT ORCHESTATION
2020-11-25 13:07:52.055208 I | ceph-cluster-controller: reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:52.070690 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:52.088979 I | ceph-cluster-controller: detecting the ceph image version for image ceph/ceph:v15.2.6...
2020-11-25 13:07:53.904811 I | ceph-cluster-controller: detected ceph image version: "15.2.6-0 octopus"
2020-11-25 13:07:53.904862 I | ceph-cluster-controller: validating ceph version from provided image
```

Closes: https://github.com/rook/rook/issues/6587
Signed-off-by: Sébastien Han <seb@redhat.com>
2020-11-25 15:32:04 +01:00
Arun Kumar Mohan 65d16bfc94 ceph: manual changes needed for kubernetes api updates
Fetched latest lib-bucket-provisioner changes as well.

Signed-off-by: Arun Kumar Mohan <amohan@redhat.com>
2020-11-18 21:14:01 +05:30
Santosh Pillai 70c5f70701 ceph: support IPv6 single-stack for ceph
Add --ms-bind-ipv6 true args to mom, osd, mgr, object, mds, rbd daemons.

Signed-off-by: Santosh Pillai <sapillai@redhat.com>
2020-10-02 01:03:03 +05:30