Add support for setting Toleration and NodeAffinity
to CSI Provisioner deployment or statefulset and
plugin daemonset through ENV variables.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
function AddNodeAffinity was not adding any node
affinity instead it was forming the nodeaffinity
object. renamed it to GenerateNodeAffinity for more
meaningful
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
previously we are not updating the service
if it's already present. with this change,
we will update the service. this does not
trigger any error message if service
already present.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The node selector for running OSDs on PVCs was using the node name
rather than the node's hostname. In clusters where the node name
is different from the hostname this would cause the osd daemons
to be in pending state indefinitely. Now the node selector will
use the hostname as expected.
Signed-off-by: travisn <tnielsen@redhat.com>
On rare occasion, the ceph checks might not be 100% correct and the user
might decide to force an upgrade anyway.
Correctly, if we are in an upgrade, we perform `ok-to-stop` check for
each daemon, if one of them fails, we retry and eventually fail.
They are corner-cases where users would like to force the upgrade anyway.
Enhance the new CR property: "skipUpgradeChecks: true".
Closes: https://github.com/rook/rook/issues/3872
Signed-off-by: Sébastien Han <seb@redhat.com>
From now on, Rook will only perform check before upgrades when there is
an actual upgrade. So if the Ceph image changed and a new version is
desired Rook will go through all the daemons and update them one by one
and perform checks in between.
Closes: https://github.com/rook/rook/issues/3583
Signed-off-by: Sébastien Han <seb@redhat.com>
Deployment behaves better when a node gets disconnected
from the rest of the cluster - new provisioner leader
is elected in ~15 seconds, while it may take up to
5 minutes for StatefulSet to start a new replica.
if kube version is 1.13.x deploy provisioner as statefulset.
if kube version is higher than 1.14+ deploy provisioner
as deployment.
Refer: kubernetes-csi/external-provisioner@52d1fbc
Refer: ceph/ceph-csi#497
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
- Added code to support StorageClassDeviceSet spec provided in the cluster-on-pvc.yaml
- The code reads the StorageClassDeviceSet spec and creates pvc based on the ‘count’ field for each device set.
- OSD prepare job is started for each PVC which activates the ceph-volume on each PVC
- Finally OSD is started on each of the PVC device.
Co-authored-by: rohan47 <rohgupta@redhat.com>
Co-authored-by: Ashish Ranjan <aranjan@redhat.com>
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
We do not determine the daemon type and name by string parsing anymore
but passing that info directly in the update call, it's more reliable.
Also removing a bunch of unused functions.
Signed-off-by: Sébastien Han <seb@redhat.com>
When a cluster is updated with a different image version, this triggers
a serialized restart of all the pods. Prior to this commit, no safety
check were performed and rook was hoping for the best outcome.
Now before doing restarting a daemon we check it can be restarted. Once
it's restarted we also check we can pursue with the rest of the
platform. For instance, with monitors we check that they are in quorum,
for OSD we check that PGs are clean and for MDS we make sure they are
all active.
Fixes: https://github.com/rook/rook/issues/2889
Signed-off-by: Sébastien Han <seb@redhat.com>
Add missing docstrings for container image
functions in pod.go, noting the behavior
when getting a container image from a pod
which only has a single container defined.
Signed-off-by: Kristoffer Grönlund <kgronlund@suse.com>
Follow-up to #3436:
The validation module has a defined constant for
label value max length. It makes sense to use it
here.
Signed-off-by: Kristoffer Grönlund <kgronlund@suse.com>
this patch introduces failure-domain aware scheduling for monitor pods.
previously the only policy was to avoid scheduling monitors on the same
nodes. the new policy tries to spread monitors across zones and nodes.
NOTE: this patch only enforces the well-known k8s "zone"
failure-domain label (i.e. it does not look for region labels). this
decision is made for two reasons. first, eliminating explicit
scheduling is an important goal and will be done as part of upcoming
work. this will enable all supported failure-domain labels to be
handled. second, the "zone" domain is likely more appropriate for a
larger portion of users (as opposed to the geographical distinction
made with region), and supporting multiple failure domain types would
add significant complexity for a temporary resolution to failure
domain scheduling.
at a high-level this patch introduces a data structure `NodeUsage` that
is a pairing of a v1.Node and metadata relevant to scheduling: number of
monitor pods on the node, and its status w.r.t. to being scheduable for
new monitor pods.
each scheduling event computes a unified data structure that organizes
for each node a `NodeUsage` structure into per-failure-zone groups.
subsequent algorithms rely soley on this unified structure to make
scheduling decisions.
there are two entry points to the changes made:
1) during orchestration mon:Cluster:assignMons is invoked to make a
place new monitor pods onto nodes. the core scheduling logic is now
self-contained in mon:scheduleMonitor which implements node and zone
aware scheduling policies.
2) periodic health checks resolve any conflicts that may occur due to
changes to the cluster (e.g. new nodes, configuration changes, etc...).
the two existing checks: mons on invalid nodes, and overloaded nodes are
both handled.
fixes: #2603
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
Add a wrapper for the cmd-reporter function of the 'rook' binary to
k8sutil so that it's easier for operators to use the functionality.
Operators still need to have some idea of how CmdReporter works. It runs
the requested command in a job, but if the calling operator needs the
job to have special configuration, the operator must request the pointer
to the job struct from CmdReporter to modify it before calling the
CmdReporter's Run method.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Add a `DeleteResource` function that accepts new `DeleteOptions` and
`WaitOptions` structs as inputs. This new funciton is reusable and
extensible for any Kubernetes resource.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Previously, Rook Agent and Discovery DaemonSet deployment didn't allow
adding nodeAffinity. This commit adds nodeAffinity spec to daemonSet
deployment, which can be configured through environment variables in
operator deployment yaml.
+ Support multiple LabelKey, each with multiple LabelValue
+ Support multiple LabelKey with no value
Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
The check for whether to set the OwnerReferences is no longer
necessary. When passing the correct value to the apiVersion,
the OwnerReferences can be successfully set for OpenShift.
Signed-off-by: travisn <tnielsen@redhat.com>
This commit does multiple things:
* remove support for AllNodes where we would deploy one rgw per node on
all the nodes.
* a transition path is implemented in the code so that if someone has an
existing deployment, daemonsets will be removed and replaced by an
deployments.
* when using "instances", each rgw deployed has its own key which makes
Ceph reporting the exact number of rgw running, see:
```
[root@rook-ceph-operator-775cf575c5-bh4sr /]# ceph -s
cluster:
id: 611fcf39-0669-4864-9a12-debb35c0397a
health: HEALTH_OK
services:
mon: 3 daemons, quorum a,b,c (age 12h)
mgr: a(active, since 12h)
osd: 3 osds: 3 up (since 12h), 3 in (since 12h)
rgw: 3 daemons active (my.store.a, my.store.b, my.store.c)
data:
pools: 6 pools, 600 pgs
objects: 235 objects, 3.8 KiB
usage: 3.0 GiB used, 84 GiB / 87 GiB avail
pgs: 600 active+clean
```
Closes: https://github.com/rook/rook/issues/2474, https://github.com/rook/rook/issues/2957 and https://github.com/rook/rook/issues/3245
Signed-off-by: Sébastien Han <seb@redhat.com>
This removes the unnecessary check for taints on nodes in the
`GetNodeSchedulable()` function. This fixes that even though the user
has specified `tolerations` for, e.g., `NoSchedule` taints, that would
be ignored and the node(s) directly be "marked" as unschedulable.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
The ceph controller will delete and recreate the detec-version job, when
an already existing job is found. This helps avoid cluster creation from
getting hung up on waiting for an already existing/stale job to finish.
Fixes#3081.
Signed-off-by: Kaushal M <kshlmster@gmail.com>
Because the deployment update-and-wait function waits for the deployment
to be ready, and that cannot happen due to the keyring not
having been updated yet. The keyring has its
owner set to the deployment so that no special keyring handling must
be done, but it must be created after the deployment UID is known.
Change the order of operations so that the existing deployment's UID can
be retrieved if it exists and the keyring created/updated before the
update-and-wait function is called.
This order-of-operations issue currently only applies to the mds. Other
daemons whose keyrings are owned by the replication controller do not
use the update-and-wait function.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Add a `rook-version` label to all controller resources used by Ceph:
deployments, daemonsets, and jobs. Labels are added to controller
resources only and not to the pod templates within because changing pod
templates causes updates due to the label change. The controller
resources themselves are not updated with the label addition and
therefore don't cause an unnecessary upgrade.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
All usages of k8s go client are now also using the versioned `AppsV1() `
call for the client.
Updated MySQL and Wordpress, and Kube Registy examples to use apps/v1
Deployments.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
Make the Ceph operator more cautious about when it decides to remove
nodes from the Rook-Ceph cluster which are acting as osd hosts.
When `useAllNodes` is set to `true` we assume that the user wants to
have the most hands-off experience. Node removals are allowed when a
node is delted from Kubernetes and when a node has its taints/affinities
modified by the user (but not by automatic k8s modification as much as
possible).
When `useAllnodes` is set to `false` the only time a node is removed is
if it is removed from the Ceph cluster definition.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Node validity is not always as simple as a true/false. Refactor each
validity test into its own function for operators that wish to check
validity more granularly. Ceph will use these changes.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Song Gao
travisn
Madhu Rajanna
Sébastien Han
rohan47
giovanism
Noah Watkins
AllenZMC
Nick McKinney
Mateusz Gozdek
Blaine Gardner
Kristoffer Grönlund
Umanga Chapagain
Jose A. Rivera
Alexander Trost
Kaushal M