when creating networkFence CR, it requires IP's to block
which we get from running `rbd status ...` command. But,
the client.healthchecker user didn't had the right caps
to run hence it was giving error. Now, adding the required
caps `profile rbd-read-only` to osd so that rbd command can
be executed.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit c78bd1cbc6)
Using the new configuration parameters prometheusEndpoint and
prometheusEndpointSSLVerify users can configure dashboard to
point to their prometheus instance.
closes: #12876
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
(cherry picked from commit c763935436)
When OSDs flap, ceph stops the OSD daemon if its marked down greater than
5 times in 600 seconds. But OSD pod restarts and marks the OSD `up` again.
This causes the PGs mapped to these OSDs to peer. While the PGs are peering,
IO to these PGs are blocked.
So we need to ensure that if ceph is marking OSD `down` due to flapping, OSD pod
should not restart to mark the OSDs `up` again.
This PR adds a sleep to the OSD pod if the container returned with a 0 exit code
Default behavior is to sleep for 6 hrs. But user can configure it from the
ceph cluster spec.
Signed-off-by: sp98 <sapillai@redhat.com>
(cherry picked from commit 4eb9f62205)
While two mgrs is considered sufficient, more mgr daemons are
now allowed in case the admin wants even more fault tolerance
to the active mgr going down, in case multiple mgrs go down.
Up to five mgr pods will be allowed. All mgrs will be in
standby mode except one active mgr. All mgr pods have a sidecar
that will update their respective pod specs with the active
or passive label.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 66547d27be)
some helm comments incorrectly indicate ceph v18 is not supported
Signed-off-by: Micah Nagel <micah.nagel@defenseunicorns.com>
(cherry picked from commit 0ff224d453)
Change how Rook detects network CIDRs for Multus networks. The IPAM
configuration is only defined as an arbitrary string JSON blob with a
"type" field and nothing more. Rook's detection of CIDRs for whereabouts
had already grown out of date since the initial implementation.
Additionally, Rook did not support DHCP IPAM, which is a reasonable
choice for users. And more, Rook did not support CNI plugin chaining,
which further complicates NADs. Based on the CNI spec, network chaning
can result in any changes to network CIDRs from the first-given plugin.
All these problems make it more and more difficult for Rook to support
Multus by inspecting the NAD itself to predict network CIDRs. Instead,
it is better for Rook to treat the CNI process as a black box. To
preserve legacy functionality of auto-detecting networks and to make
that as robust as possible, change to a canary-style architecture like
that used for Ceph mons, from which Rook will detect the network CIDRs
if possible.
Also allow users to specify overrides for CIDR ranges. This allows Rook
to still support esoteric and unexpected NAD or network configurations
where a CIDR range is not detectable or where the range detected would
be incomplete. Because it may be impossible for Rook to understand the
network CIDRs wholistically while residing only on a portion of the
network, this feature should have been present from Multus's inception.
Improving CIDR auto-detection and allowing users to specify overrides
for auto-detected CIDRs rounds out Rook's Multus support for CephCluster
(core/RADOS) installations. No further architectural changes should be
needed for CephClusters as regards application of public/cluster network
CIDRs for Multus networks.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
(cherry picked from commit 3c43268d0a)
It's better to move most of discover daemon setting
from env to configmap rook-ceph-operator-config.
Although, we are moving to configmap, we keep reading settings
from env but the priority will be configmap settings.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit fb39580067)
The toolbox based on the operator image was added after the initial
release of v1.12.0, where the image tags from master were replaced
by hte release version. When the feature was backported,
the master tag remained. Now the version tag is set
as expected.
Signed-off-by: travisn <tnielsen@redhat.com>
it was confusing if we are calling a ceph cluster name
or k8s cluster name, so re-named
Signed-off-by: parth-gr <paarora@redhat.com>
(cherry picked from commit 98c4567219)
The object user was previously required to be created in the
same namespace as the object store and the cluster. Now,
the object user can be reconciled even in a different namespace
from the cluster and object store. The namespace would be specified
in the object user CR.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 2b1cc4c7b8)
Signed-off-by: Michael Adam <obnox@samba.org>
this change introduces a new 'make target 'docs'that generates part of the documentation
It particular, it runs the `helm-docs` target.
Additionally, `make docs` updates the multus validation job manifest
by inserting the output of `rook multus validation run --help` between
two newly introduced markers.
The result of running `make docs` is intended to be committed to git after running
Fixes: #12706
Signed-off-by: Michael Adam <obnox@samba.org>
Signed-off-by: Blaine Gardner <b.blaine.gardner@gmail.com>
Co-authored-by: Blaine Gardner <b.blaine.gardner@gmail.com>
Co-authored-by: Michael Adam <obnox@samba.org>
Update build/deploy/generate-deploy-examples.sh
Signed-off-by: Michael Adam <obnox@samba.org>
(cherry picked from commit 22882c5358)
The CRDs were not generated for the latest since #12384
was merged without rebasing, and other updates with a newer
dependency required the newer descriptions.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 438b61721f)
If osd store is updated in the ceph cluster, then
delete OSDs one by one, cleanup disks and provision a new OSD on
the same disk
Signed-off-by: sp98 <sapillai@redhat.com>
(cherry picked from commit 886bb357ef)
update vault and other indirect imports. Also,
updating k8s package to `v0.28.0-rc.0` since with
v0.27.4 it was through build error.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit ab3763767f)
added a sample job manifest named `multus-validation` that
validates the multus configuration in the cluster.
Signed-off-by: Nikhil-Ladha <nikhilladha1999@gmail.com>
(cherry picked from commit 9fea9cd865)
Adding maxUnavailable parameter to the cephfs csi daemonset. The
default value of maxUnavailable = 1 can make the upgrade process
slower in environments with large number of nodes.
Fixes: #12636
Signed-off-by: karthik-us <ksubrahm@redhat.com>
(cherry picked from commit 2675c976d5)
Added a new flag `--v2-port-enable` to enable the v2 mon port.
Signed-off-by: Nikhil-Ladha <nikhilladha1999@gmail.com>
(cherry picked from commit 5daddbe379)
Update the ceph cosi driver image to v0.1.1, so that it can
work on both amd and arm platforms.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
(cherry picked from commit 1bf33f125e)
We need to create the namespace with the import script,
As per the documentation
The import script creates the secrets and
cm which is later used by the operator for cluster creation.
Signed-off-by: parth-gr <paarora@redhat.com>
(cherry picked from commit f9f880e528)
The CephCOSIDriver deploymentStrategy requires Auto, Never,
or Always. Change the example to Auto.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 182211d26c)
users & buckets admin capabilities aren't spelled the same
way between rook crd (singular) and ceph (plural). It's a bit
misleading when comparing ceph admin cap and rook users.
Signed-off-by: Peter Goron <peter.goron@gmail.com>
(cherry picked from commit 40eed236cf)
Adding CephCOSIDriver CRD and controller. The controller will bring up
the ceph cosi driver when first object store is created in the rook
operator namespace. Then admin can defined COSI CRDs like BucketClass
and BucketAccessClass for different object stores deployed via Rook.
Using the BucketClass and BucketAccessClass, user can define
BucketAccess for backend bucket in the RGW. The CephCOSIDriver CRD
defines configuration options for ceph cosi driver. In the first version
its usability is minimal. Even if it is not defined Rook will bring up
the ceph cosi driver with default values.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
(cherry picked from commit b48dc8a335)
When the ceph.conf is not in a well-known location, it is typical
for a custom ceph.keyring to be required as well. Currently, the
create-external-cluster-resources.py only tries to load the keyring
from well-known paths, and fails.
This commit adds a new optional argument `--keyring` to help in this
situation. When specified, create-external-cluster-resources.py will
attempt to use this as the keyring to authenticate with Ceph.
Signed-off-by: Angelos Kolaitis <neoaggelos@gmail.com>
(cherry picked from commit c021256e96)
Some users want to deploy two CephObjectStores for a single Zone. The first
configures RGWs to process the synchronization of the data, while the second
CephObjectStore configures the client RGWs.
Currently, this can be implemented by setting the RGW option
'rgw_run_sync_thread' in the 'rook-config-override' ConfigMap, though it is not
really user friendly.
Ref: https://docs.ceph.com/en/latest/radosgw/config-ref/#confval-rgw_run_sync_thread
This commit adds a new option in the CephObjectStore CRD as defined in issue
https://github.com/rook/rook/issues/12272. The new option
'disableMultisiteSyncTraffic' determine whether the operator should disable the
multisite sync threads for the RGWs.
If the option is set to 'false', or if the option is not specified, the operator
does nothing. This ensures that the multisite sync threads will not be enabled
for users that disabled explicitely the multisite sync threads either manually
or with the 'rook-config-override' ConfigMap.
This commit also recommends to use two objectstore when scaling Ceph Objectstore
Multisite replication, with one objectstore configured with disabled replication
traffic.
Signed-off-by: Lucas Henry <polyedre@disroot.org>
(cherry picked from commit 393d09347e)
set the csi subvolume to pin type distributed and pin setting 1
So to statically balance the PVs across all MDS ranks
Signed-off-by: parth-gr <paarora@redhat.com>
(cherry picked from commit 53413e5a24)
update test files to support the next version of ceph, ceph reef v18
Signed-off-by: Javier <sjavierlopez@gmail.com>
(cherry picked from commit 46cb9435a6)
in the existing node watcher, we'll check for node update
event and see if there are `out-of-service` taints are applied
and `ROOK_WATCH_FOR_NODE_FAILURE` is enabled in rook-ceph-operator-configmap,
if then we'll create the networkFence cr and delete the cr if nodes come back.
And, added the unit test too.
Signed-off-by: subhamkrai <srai@redhat.com>
adding drop `ALL` capabilities in rook operator container
as this is not required and will remove warning in ocp cluster.
Signed-off-by: subhamkrai <srai@redhat.com>
Redouane Kachach
Travis Nielsen
subhamkrai
sp98
mergify[bot]
Micah Nagel
Blaine Gardner
parth-gr
Michael Adam
Deepika Upadhyay
Nikhil-Ladha
karthik-us
Jiffin Tony Thottan
Peter Goron
Angelos Kolaitis
Lucas Henry
Javier