archiveCrash is meant to silence the RECENT_CRASH health warning for a
removed OSD by archiving its crash, but the early-return guard was
inverted. GetCrashList unmarshals `ceph crash ls` into a non-nil slice on
every success, so `if crash != nil` was always true. The function always
logged "no ceph crash to silence" and the archive loop was unreachable, so
OSD removal never archived the crash and the warning lingered. Guard on
`len(crash) == 0` so only a genuinely empty list short-circuits.
Reviving the loop surfaced two latent bugs it had always masked. On a
non-empty list with no entry for the removed OSD the crash id stayed empty
and the code ran `ceph crash archive ""`, which the mgr rejects with EINVAL
and logs as a spurious error during routine OSD removal, so skip the
archive when no crash matches. The loop also broke on the first match, but
`ceph crash ls` is oldest-first and includes already-archived entries, so
an OSD with several crashes had only its oldest one archived while
RECENT_CRASH persisted; archive every matching entry instead of just the
first.
Extend TestArchiveCrash to cover all four cases: a single matching crash, a
list with several matching crashes that are all archived, an empty list,
and a non-empty list with no matching entry where nothing is archived.
Signed-off-by: Anas Khan <83116240+anxkhn@users.noreply.github.com>
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
Fix duplicate words, incorrect articles (a/an), it's/its, and other small
grammar mistakes in Go comments and user-facing messages across pkg/, cmd/,
and tests/.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
Several godoc comments led with a stale or incorrect identifier, left
over from renames, exported/unexported changes, copy-paste between
sibling declarations, or plain typos. As a result the documented name no
longer matched the function, method, type, or var it describes. Correct
each leading word to the name of the declaration it documents.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
remov restrictions that prevented LVM logical volume from being
provisioned as OSDs. LV devices with a metadatadevice were rejected at
the filtering stage. LV devices without one were incorrectly being
routed to ceph-volume raw mode which was resuting in error. This PR:
- removes metadatadevice restriction on LV devices.
- Adds LVM time check to isSafeToUseRAWMode to prevent raw mode on lvm
Signed-off-by: Santosh <sapillai@redhat.com>
Fixes#16834 and #17384. Per-OSD CR deviceClass was ignored in
osd prepare job when reporting the osd config back to the operator,
and in the operator's reconcile override.
Fixed by resolving the per-device class from the CR devices list
in GetCephVolumeRawOSDs and in makeDeployment.
Signed-off-by: Artem Torubarov <artem.torubarov@sap.com>
During OSD provisioning, the KMS error log incorrectly uses logger.Error() instead of logger.Errorf(), causing the format specifier %q to appear in the logs. Changed logger.Error to logger.Errorf to fix the same.
Signed-off-by: Prabhala Tara Aasrita <taraasrita@ibm.com>
Support using SSE-S3 encryption with RGW using vault Agent auth.
RGW sends requests to the agent instead of directly to Vault, and the agent transparently injects the authentication token. This eliminates using and managing a static token
Signed-off-by: Santosh <sapillai@redhat.com>
When cephCluster is resinstalled and WipeDevicesFromOtherClusters is set
to true, then Rook cleans up the OSD disks using ceph-volum lvm zap, so
that new OSD can created on this disk. This PR removes the dependencies
of the "ceph-volume lvm zap" and provides implements the entry disk
"ceph-volume lvm zap" logic within rook
Signed-off-by: Santosh <sapillai@redhat.com>
In getOSDDiskToBeWiped(), when the RealPath doesn't match the device path reported by ceph-volume, also check each entry in the space-separated DevLinks string. This handles the case where ceph-volume raw list reports an LVM symlink (e.g. /dev/rhel/ceph-data) that differs from the resolved RealPath (e.g. /dev/mapper/rhel-ceph--data).
Signed-off-by: Santosh <sapillai@redhat.com>
OSDs are created with `ceph-volume lvm batch` if `metadataDevice`
field is specified in CephCluster CR. Since this command does not
support kernel names (e.g. `/dev/dm-X`) for multipath devices,
we should use real names (e.g. `/dev/mapper/mpathX`) instead.
NOTE:
I intentionally keep raw mode OSD creation code as is
because `ceph-volume raw prepare` supports kernel names
for any devices.
Closes: https://github.com/rook/rook/issues/17057
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
when the osd is created there is no need for
osd bootstrap keyring, so remove the keyring
and keyring file,
New keyring will be created if
new osd need to be provisoned
Signed-off-by: parth-gr <partharora1010@gmail.com>
Fixes quick disk shredding by using dd to shred data at additional offsets where ceph metadata is duplicated. For full shred, the shred utility remains in use.
Signed-off-by: Vilius Puškunalis <47086537+puskunalis@users.noreply.github.com>
This change refactors the getSecret method somewhat toward cleaner code.
The only additional change in behavior is the introduction of a switch instead
of multiple if's and error treatment of the case of an empty secret.
Signed-off-by: subhamkrai <srai@redhat.com>
During the OSD preparation step, if the encrypted OSD disk belongs to a
different cluster, then clean the disk if `wipeDeviceFromOtherClusters`
is set to true.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
This is the first implementation of CephX key rotation in Rook.
Adds key rotation API from design PR 15915.
Also add helper methods for rotating keys, determining when keys
need to be rotated, and for generating CephX key statuses. These will be
reusable for other Rook reconciles beyond object/RGW.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Allow force creation of OSD on a device previously configured in a different ceph cluster.
The OSD prepare pod job will zap the OSD disk using ceph-volume lvm zap
if that disk has metadata from a different ceph cluster.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
this commit remove the code which sets the dmcrypt encryption
key from secret as environment variable in the prepare pod job
spec. Now, the env will be set under function `setKEKinEnv`, which
tries to reads secret from k8s first method `c.IsK8s()`under
`GetSecret` and then check for KMS to ready and apply env directly.
Signed-off-by: subhamkrai <srai@redhat.com>
Refactored multiple conditional if-else blocks into switch statements to improve readability and maintainability. Also removed outdated staticcheck rule comments (QF1002, QF1003) from .golangci.yaml.
Signed-off-by: Carlos Barria <cbarria@yahoo.com>
ceph-volume raw list will return the main disk instead of the mpath
setup. `ceph-volume lvm zap` on the main disks fails. This PR uses
`lsblk /mnt/<diskreference> ` to fetch the actual mapath disk and use it
for cleaning
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Resolves this warning:
WARN [runner/nolint_filter] Found unknown linters in //nolint directives: just configuration keys., value not credential
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
The ci was using a pretty old version og golangci-lint.
This updates to the latest version.
Additionally, it silences some
gosec integer conversion overflow false positves
and fixes some real errors of this category
and string format errors found by golangci-lint, while at it.
Co-authored-by: Blaine Gardner <b.blaine.gardner@gmail.com>
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: Michael Adam <obnox@samba.org>
currently device class and device type
labels were clubbed with eachother
create a seperate label, as these two labels
can be seperate
Signed-off-by: parth-gr <partharora1010@gmail.com>
we were adding the device class as the
disk rotational type, but device class
can be user defined, so if user has
added the device class, use that value
Signed-off-by: parth-gr <partharora1010@gmail.com>
Given that Ceph Quincy (v17) is past end of life,
remove Quincy from the supported Ceph versions,
examples, and documentation.
Supported versions now include only Reef and Squid.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When doing the clean-up of raw device OSDs, it was not taking metadata
and wal devices into account. This commit discover them via the output
of `ceph-volume raw list`, which is returning `device_db` and/or
`device_wal` if they are present.
After discovering the metadata and wal device it also clean them and
close the encrypted device if any.
Signed-off-by: Mathias Chapelain <mathias.chapelain@proton.ch>
While adding a new encryption key to slot 1
if there exists a key in slot 1 which is not
equal to the one we want to update it with,
we kill the slot and then add the new key to it.
While killing the slot, the existing code uses
the new key, which is not valid in such cases.
This patch modifies the code to use the key in
slot 0 (the one that we know works) to kill the slot.
Signed-off-by: Niraj Yadav <niryadav@redhat.com>