This fixes OSD info being incomplete when a sidecar container is first
in the .spec.Template.Spec.Containers list.
I added a small helper function to find a container named "osd" instead
of always assuming the first one.
Signed-off-by: Jan Breitkopf <jan.breitkopf@prorocketeers.com>
(cherry picked from commit 1ff6f70311)
`updateExistingOSDs` should not wait and retry if the golang context got
cancelled. Else it would keep on retrying for 20 minutes before
exciting.
Signed-off-by: Santosh <sapillai@redhat.com>
(cherry picked from commit 33046734b3)
Read affinity in Ceph v20.2.0 can cause corruption.
Disable this feature for this version of Ceph to
avoid hitting any corruption in this case. When the next
patch release is out for tentacle, this issue will be
resolved and when upgrading to it, read affinity would
automatically be re-enabled if needed.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 76e9c04b36)
add support for ceph.rook.io/do-not-reconcile on cephcluster crs
skip reconcile early and emit a normal reconcile-skipped event
avoid reloadmanager on updates for labeled cephclusters
add unit test for skip behavior
Signed-off-by: Oded Viner <oviner@redhat.com>
(cherry picked from commit 5be726b386)
previously, if multiple mount option was passed it was
handing it wrong. For example,
```
ms_mode=prefer-secure,recover_session=clean
```
was treated as
```
ms_mode: prefer-secure,recover_sessio
```
With current fix it handles it correctly. Example,
```
ms_mode: prefer-secure,
recover_session=clean,
```
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit acf9ad8995)
Add a resource watch to reconcile clusters when any referenced Secrets
in cephConfigFromSecret are updated. This matches the behaviour of
reconciling clusters when cephConfig changes. Without this change, if a
Secret that is referenced by cephConfigFromSecret is updated, then the
cluster is not immediately updated, so the cluster state will not match
the configuration until something else triggers a reconcile.
Resolves#16371
Signed-off-by: Martin Rowe <martin.p.rowe@gmail.com>
(cherry picked from commit 816c67847d)
we are now adding tentacle to the supported versions and add the
upgrade test from squid to tentacle. Also, clean some unused code.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit 11fac627b0)
Correct the names used for controller plugin and node plugin resource
setting
Signed-off-by: Steve Wills <steve@mouf.net>
(cherry picked from commit 604226770e)
If the ceph status is "active+lean+snaptrimp" or
"ative+clean+snatrip_wait" , the the PDB controller should treat this
ceph staus as healthy and don't block the node drain
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
(cherry picked from commit c0eb34815f)
if the filesystem is just created and getting the status
updated svg controller can still go and proceed to
check the filesystem status
If the filesystem status is empty we should retry instead of
proceeding further
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit fb7226698b)
if the pool is just created and getting the status
updated rn controller can still go and proceed to
check the pool status
If the pool status is empty we should retry instead of
proceeding further
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 7ef4b4849c)
Signed-off-by: parth-gr <partharora1010@gmail.com>
currently, in SVG crd while updating status we don't have retryOnConflicts
similar to other CRD, this commit add the retryOnConflicts.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit e9d5efb3e1)
currently, in RNS crd while updating status we don't
have retryOnConflicts, similar to other CRD due to
this RNS status was not updated succesfully and to
fix this we have restart the rook operator pod.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit c8ee7305d4)
currently the device class label was added to the osd pod,
we need the device class label on prepare pod,
so to spread across prpeare pods evenly among the faiure domains
per device class
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 4fcdfaad1f)
Add optinal hostnetwork field for Ceph Mgr to control whether the
mgr pods to run in host network. If unset, this defaults to
cluster level Network.HostNetwork value. This particulary useful
when user wants to restrict ceph mgr pod from exposing metrics
port in all host interfaces.
Signed-off-by: Sunnatillo <sunnat.samadov@est.tech>
(cherry picked from commit b9a4685f65)
Wait for the mon-canary pods to be terminated before starting the actual
mons. When topology spread constraints are added to evenly spread the
mons, then pod-anti affinity does not allow mons to be created on the
same node where other mons are running, this also includes the
mon-canary pods. We delete the mon-canary pods and then start the actual
mon pods. Sometimes the termination of the canary pods might take more
time, so schedular won't schedular mon pods on that node.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
(cherry picked from commit 3137a857df)
The OSDs may require different resources based on their device
class. The overall osd resources were only being used, rather
than properly looking up the specific device class resources.
Now the expected resources will take affect per device class.
Co-authored-by: Matthias Osthues <osthues.matthias@gmail.com>
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit d3c0bacd88)
The mon canary should quickly shut down after the pod is
deleted, since it has no purpose to continue running.
Since the sleep does not catch the SIGTERM as pid 1,
use a bash trap to exit quickly.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 48b70500fa)
k8s requires the endpointSlice must have label
`kubernetes.io/service-name` to be associated with
service. Without this label, the k8s service controller
can't link the EndpointSlice to the service.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit 7004213f92)
The target size ratio is currently always being set to 0, when
neither the legacy targetSizeRatio nor the parameter for
target_size_ratio are set. In this case, we should not set it to 0,
but rather should skip the command to set the target size ratio.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 938380734d)
if there a bit long to update osds in parallel,
we need to timeout and abort the synchronous loop
and start the cluster reconcile again from the beginning
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 4377823675)
When OSDs start, init containers attempt to get the latest CephX key for
the OSD to allow OSDs to potentially continue working after key rotation.
However, in Ceph corner cases, mons could be unavailable while OSDs
could still be viable with existing on-disk keys. Since key rotation is
a rare event, it's likely that the on-disk keys are still good.
The worst case scenario is that key updates were needed but didn't
succeed in init containers. In this case, instead of the init container
failing, the OSD startup will fail instead. Thus, this should introduce
no extra risk but merely shift the failure to a different container.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
(cherry picked from commit d9d31fe527)
external mode was dependednt on the ceph status to
update the cluster connected condition,
BUt as now the status check will only update the ceph status,
so we will explicitly update the ceph status condition in the
end of the reconcile
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 3f5ebe2f4f)
currently the health checkup was reporting the
condition and reason to be always connected,
But which might not be the case,
So instead of that dont report the condition and
its phase during the health checkups
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 454c221c53)
currently we are updating the mon endpoints
and using it with rook-ceph-csi cm,
But we need latest ports in the cluster info,
during the creation of the ceph connection cr
when csi operator is enabled,
so ceph connection cr can use the latest mons ports
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 76a7132c56)
This change introduces support for setting the ceph cache memory limit
ratios that were previously hardcoded.
Codegen was drivey-by updated as the current version errored.
Resolves#16551
Signed-off-by: Tim Buchwaldt <tim.buchwaldt@deepl.com>
(cherry picked from commit 8db5274703)
The csi volumes and volume mount settings are now
converted to the csi operator driver CR, for example
to allow nix os mounts to be applied to the csi
node plugins.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 7a515eb24a)
currently if we disable the monitoring for rn,
it doesnt reset the status
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 49c26dbfb0)
The current behavior does not print the PHASE column, as most other
CRDs do. E.g.:
```
~ $ k get cephor lfa
NAME AGE
lfa 45d
```
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
(cherry picked from commit 6d9c884259)
The current behavior does not print the PHASE column, as most other
CRDs do. E.g.:
```
~ $ k get cephnfs nfs1
NAME AGE
nfs1 45d
```
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
(cherry picked from commit 5ee982f1e1)
The current behavior does not print the PHASE column, as most other
CRDs do. E.g.:
```
~ $ k get cephbn chorus
NAME AGE
chorus 10d
```
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
(cherry picked from commit 8866d47d92)
blocklisting IP can cause problems when the cleanup
job pod runs on the same host or gets the same ip
as that of the rbd client ip that is present in
the rbd status/watchers. instead of blocklisting
the whole ip of the node or the client blocklist
only the unique ip:nonce to allow the node to not
have any effect because of the cleanup job.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 5ae49cf7a0)
Clean encrypted disks from other clusters by checking the cephFSID in
the luks header.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
(cherry picked from commit ec271bdde3)
This is a fix/workaround to set the Recreate
deployment strategy as default in Rook as
its long proven working without any problem.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 333082c397)
CephCSI will remove the livess sidecar
container functionality as it was created
very long back and it should be replaced with
kubernetes GRPC livessness problem.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 46c7d2cc26)
Jan Breitkopf
Santosh
Joshua Hoblitt
Travis Nielsen
Oded Viner
subhamkrai
Martin Rowe
Artem Torubarov
Steve Wills
parth-gr
subham rai
Sunnatillo
Blaine Gardner
Tim Buchwaldt
Madhu Rajanna