Since Rook is no longer creating partitions and leaving all that
work to ceph-volume, we should let ceph-volume choose the defaults
for the database size and use the max available. The default of 20GB
in fact doesn't even make sense since Ceph will only use the first 3GB
of that size and the other 17GB was wasted.
Signed-off-by: travisn <tnielsen@redhat.com>
Deployment behaves better when a node gets disconnected
from the rest of the cluster - new provisioner leader
is elected in ~15 seconds, while it may take up to
5 minutes for StatefulSet to start a new replica.
if kube version is 1.13.x deploy provisioner as statefulset.
if kube version is higher than 1.14+ deploy provisioner
as deployment.
Refer: kubernetes-csi/external-provisioner@52d1fbc
Refer: ceph/ceph-csi#497
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Add a prefix to the csi drivername when ceph csi is deployed by rook.
This aims to prevent trivial conflict between csi instances when two
rook operators are deployed into the same cluster. By default the
prefix is the "<rook-namespace>." but can by customized on the cli
and via environment vars.
Signed-off-by: John Mulligan <jmulligan@redhat.com>
- Added code to support StorageClassDeviceSet spec provided in the cluster-on-pvc.yaml
- The code reads the StorageClassDeviceSet spec and creates pvc based on the ‘count’ field for each device set.
- OSD prepare job is started for each PVC which activates the ceph-volume on each PVC
- Finally OSD is started on each of the PVC device.
Co-authored-by: rohan47 <rohgupta@redhat.com>
Co-authored-by: Ashish Ranjan <aranjan@redhat.com>
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The discovery daemon is only necessary to be run when
OSDs are being created on raw devices and detect when
new devices are added to the cluster. If OSDs do not need
to be configured on devices, the discovery daemonset
has no need to be started.
Signed-off-by: travisn <tnielsen@redhat.com>
The flex driver does not need to be started if
only the CSI drivers are going to be used. Therefore,
we allow the admin to stop launching the rook flex
agent with the setting ROOK_ENABLE_FLEX_DRIVER in
operator.yaml
Signed-off-by: travisn <tnielsen@redhat.com>
CSI is now the preferred storage driver for Rook.
By default both the CSI and flex drivers will be started
by the operator. In a future release the flex driver
will be deprecated, but for now is still supported.
The drivers can be disabled with an environment
variable in the operator deployment in operator.yaml.
If users are only using one driver or the other there is
no need to enable both drivers.
Signed-off-by: travisn <tnielsen@redhat.com>
Replace usage of the custom osd copybins command with the new top-level
copy-binaries command introduced with cmd-reporter.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Refactor the Ceph NFS (Ganesha) daemon to use the new config pattern.
Use of a custom Rook binary to run NFS has been removed in favor of
instead running the required DBUS process as a sidecar. The effect here
is that the NFS Ganesha container itself may fail and restart a few
times before the DBUS sidecar is running.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
cmd-reporter runs a command and puts the results of the command into a
ConfigMap defined by its `--config-map-name` commandline flag.
cmd-reporter is intended to be run as a Kubernetes job where an
operator needs to run a single command and get return information back
from the command which is more than just success/failure.
The ConfigMap returned includes `stdout`, `stderr`, and `retcode` data
from the command. The ConfigMap may be preexisting, in which case
cmd-reporter will overwrite the return information in the ConfigMap.
cmd-reporter labels the ConfigMap with `app=cmd-reporter`, and if the
ConfigMap already has an app label which is different, cmd-reporter
fails without modifying the ConfigMap so as not to overwrite another
application's data in the event of a ConfigMap name+namespace collision.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Signed-off-by: Guy Margalit <guymguym@gmail.com>
Co-Authored-By: Sébastien Han <seb@redhat.com>
Co-Authored-By: Travis Nielsen <tnielsen@redhat.com>
This change is meant to allow running operators locally on a developer machine.
The idea is to allow faster development cycles by reducing the time and complexity of building -> deploying -> debugging on cluster.
For operators that rely only on kubernetes API this works easily - see cockroachdb and minio examples in development-flow doc.
The change includes:
- rook.NewContext() - Refactored to remove repeating initialization code that was copy-pasted in most of the operators in order to create the clusterd.Context and the Clientsets. Also it detects the mode of working in-cluster vs external and sets up the external mode with standard user config (~/.kube/config) and a job executor.
- rook.GetOperatorImage() - Refactor this repeating code in many operators to detect the operator pod image. Also added a global flag --operator-image that developers can use to override this when running locally.
- rook.TerminateOnError() - Added a convenient function.
If setting the fsgroup recursively on a shared filesystem mount is
not desirable, the fsgroup capability on the flex driver
should first be disabled in the operator env vars. Now the driver
will apply the fsgroup only at the top level instead of
recursively for the entire shared filesystem.
Signed-off-by: travisn <tnielsen@redhat.com>
The flex settings cannot be passed to the driver with environment variables.
There is no context available for returning the flex settings except
that the flex driver will look in a config file in the same directory.
These settings must be valid or else the driver will return the default
settings.
Signed-off-by: travisn <tnielsen@redhat.com>
The flex driver no longer needs to check whether a kubelet
restart is needed or whether the namespace-specific driver
can be supported. The copy of k8s 1.13 types can also
be removed since we have updated to a newer k8s client.
Signed-off-by: travisn <tnielsen@redhat.com>
Signed-off-by: Ashish Ranjan <ashishranjan738@gmail.com>
This commit removes one to one mapping of NFS provisioner and adds a dedicated provisioner for nfs.
Allow the user to set annotations in the CRDs of the following operators which will then be set on
the resulting Pods (Deployments, StatefulSets and so on).
Operators:
* Cassandra
* Ceph
* CockroachDB
* EdgeFS
* Minio
* NFS
The Annotations related structures have been added to the
rook.io/v1alpha2 pkg.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
All usages of k8s go client are now also using the versioned `AppsV1() `
call for the client.
Updated MySQL and Wordpress, and Kube Registy examples to use apps/v1
Deployments.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
The basic idea here is to replace the release name in the ClusterInfo
object with the fine grained version information queried at runtime.
This patch also removes the Name field from the cluster spec, which was
also runtime determined and was redundant with ClusterInfo relase name.
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
Configure the Ceph rgw daemon completely from the operator a la the
recent changes to the Ceph mon, mgr, and mds operators.
Create the rgw deployment or daemonset first, and then create the
keyring secret for the object store with its owner reference as the
corresponding deployment or daemonset. When the replication controller
is deleted, the secret is also deleted.
The RGW's mime.types file is now stored in a configmap with a different
file created for each object store. This is primarily just a means to
get the mime.types file into the rgw pod, but the added benefit is that
the administrator can modify the configmap, which could reduce
susceptibility to file type execution vulnerabilities (worst case).
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Configure the Ceph mds daemon completely from the operator a la the
recent changes to the Ceph mon and mgr operators.
Create the mds deployments first and then
create the keyring secrets for them with their owner reference as the
corresponding deployment. This will mean that the secrets do not need to
be micromanaged. When the deployment is deleted, the secret is also
deleted. This has not been necessary for the mons or the manager since
the mons share a keyring with a lifespan of the cluster, as does the
mgr, which currently has single-mgr support only.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
All devices detected by the discovery pod were being passed to the OSD provisioning pod
thus not always honoring the desired device list that should be provisioned.
Now the provisioning pod will be given the desired state from the crd,
then apply that state depending on the actual devices detected.
Also added a helper to ensure OSDsPerDevice is always valid.
Signed-off-by: travisn <tnielsen@redhat.com>
This commit introduces the necessary changes to support the new
messenger feature coming with Ceph Nautilus (currently in development).
What changes? Now the monitor listens on two port:
* old 6789 for messenger v1, which will help us support older client
(e,g: krbd)
* new 3300 for messengers v2, which brings new improvement in the
messaging layer. This new transport layer brings numerous advantages
such as encryption improvement, speed improvement, pluggable nature to
support different network stack than TCP and many more.
We still have one Service IP, however it has 2 ports, see:
```
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
rook-ceph-mon-a ClusterIP 10.106.217.160 <none> 3300/TCP,6789/TCP 4h
rook-ceph-mon-b ClusterIP 10.99.36.175 <none> 3300/TCP,6789/TCP 4h
rook-ceph-mon-c ClusterIP 10.108.220.74 <none> 3300/TCP,6789/TCP 4h
````
The `ceph.conf` has changed and we don't force the port when using an IP
address (public addr etc). Ceph, depending on its version will naturally
start the monitors on their right port, 6789.
A new --ceph-version-name CLI argument has been added to the Rook binary
so that when the pod starts it passes the ceph version name and the
configuration of the ceph.conf, as well as daemon startup flags, happen
properly.
Given that the Rook Operator remembers the port of all the monitors it
deployed (through Pod definition), this change is not an issue and will
maintain backward compatibility.
Note that to test this you must build rook with dev container image,
which contains the dev Nautilus version. So you should do something
like:
`make -j4 BASEIMAGE='ceph/daemon-base:latest-master' IMAGES='ceph' build`
Resolves: #2525
Signed-off-by: Sébastien Han <seb@redhat.com>
Configure the Ceph mgr daemon completely from the operator a la the
recent changes to the Ceph mon operator.
The pod spec for the mgr changed quite a bit, and instead of updating
the unit tests of questionable use, some additional unit test tools
applicable to any Ceph daemon have been added and used with the mgr. The
mgrs unit tests should now be more useful and get in the way of devs
less, and they can be used by other daemons later.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Make the Rook config-init unnecessary for mons, and remove that init
container. Perform all mon configuration steps in the operator, and set
up the mon pods and k8s environment such that only Ceph containers are
needed for running mons.
This should help streamline changes to the mons, as there will be no
need to change the `daemon/mon` code or `cmd/rook/ceph` code with mon
changes in the future.
This work starts to lay the groundwork for supporting the
`design/ceph-config-updates.md` design.
Notable new bits:
Create a keyring secret store helper for storing dameon keyrings, and
use it to store the mon keyring. Mon pods mount the keyring into a
k8s secret-backed volume.
Create a configmap store for the Ceph config file which can be mounted
into pods/containers directly to /etc/ceph/ceph.conf. Also store
individual mon_host and mon_initial_members values which can be mapped
into pods as environment variables and used in Ceph commandline flags,
enabling the mon pods to have the most up-to-date information about the
mon cluster when restarting and without need for operator intervention.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
travisn
Sameer Kulkarni
Madhu Rajanna
John Mulligan
rohan47andAshish Ranjan
Michael Vollman
Blaine Gardner
Guy Margalit
Ashish Ranjan
Alexander Trost
Noah Watkins
darshanime
Sébastien Han
Humble Chirammal
Huamin Chen
Madhu Rajanna
Timothy Allen
Jared Watts