The Clear method on updateQueue had no callers anywhere in the repo
(verified with grep, deadcode, and staticcheck). The queue is emptied via
Remove/Pop in practice. Remove the dead method.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
(cherry picked from commit 50c95d343e)
IsModuleInSpec has no callers anywhere in the repository (verified with
deadcode and grep). Remove the dead code.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
(cherry picked from commit f8c0d36a50)
Add support for the osd.rook.io/device-class node label to assign
CRUSH device classes to all OSDs on a node.
The operator reads the label during OSD provisioning and
deployment reconciliation. If CR-level deviceClass conflicts
with the node label, the operator will skip reconciling the
node and logs an error.
Resolves: #17131
Signed-off-by: Yuxiang He <yuxiang@dropbox.com>
(cherry picked from commit d9357dbfdc)
applyUpgradeOSDFunctionality() may run before all OSDs have registered
their new version, leaving require-osd-release unset and the cluster in
HEALTH_WARN.
Check for a single converged OSD version on each health-monitor tick and
set require-osd-release when it changes. The release name is cached to
avoid redundant ceph commands
Signed-off-by: Sunnatillo <sunnat.samadov@est.tech>
(cherry picked from commit f6fa25e844)
when using encryptedDevice:true with host based (non pvc) osds, resizing
the underlying disk and restarting the OSD didn't expand the OSD because
the LUKS encryption layer was not resized.
This PR adds resize capabilities inside the activate container. Full
device stack must be resized: PV → LV → LUKS
Steps:
1. Run pvresize and lvextend to grow the LVM layers.
2. Retrieve the LUKS key from the Ceph config-key store using the
lockbox crednetials already available in the activate container
3. Pass the key explicitly to cryptsetup resize via --key-file.
Signed-off-by: Santosh <sapillai@redhat.com>
(cherry picked from commit 3e49c9f4cf)
User RaceFreeFakeWatcher isntead of FakeWatcher in TestAddRemoveNode
function. The test runs c.Start() in a goroutine whch stops the watcher
when done. If mockNodeOrchestrationCompeltion sends a watch ever after,
that, FakeWatcher panics with "send on a closed channel".
RaceFreeFakeWatcher safely ignores the sends on a stopped channel.
Signed-off-by: Santosh <sapillai@redhat.com>
(cherry picked from commit 6781d2e58d)
Fixes#16834 and #17384. Per-OSD CR deviceClass was ignored in
osd prepare job when reporting the osd config back to the operator,
and in the operator's reconcile override.
Fixed by resolving the per-device class from the CR devices list
in GetCephVolumeRawOSDs and in makeDeployment.
Signed-off-by: Artem Torubarov <artem.torubarov@sap.com>
(cherry picked from commit b41d63788d)
adding missing resource request for mon drbd containers
log-collector and shut-down-app and update the unit test
to validate.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit d88e287726)
Added a watcher in the cluster controller to detect changes to the DRBD ConfigMap used by floating monitors in TNF deployments. When the ConfigMap is updated, the watcher triggers a CephCluster reconciliation to ensure configuration changes are applied.
Fixes#17338
Signed-off-by: Prabhala Tara Aasrita <taraasrita@ibm.com>
(cherry picked from commit af03615e97)
Going forward, admin will manage the csi operator
CR's and rook will only manage Ceph Connection cr
and client Profile cr.
The old csi driver is completely removed from Rook
and can no longer be used starting in Rook v1.20.
The upgrade guide will contain the needed transition steps
for managing the csi operator settings.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit 4eefad42e8)
Clean up duplicated words and a typo in object storage docs, comments, and user-facing messages.
Signed-off-by: immanuwell <pchpr.00@list.ru>
(cherry picked from commit c3a9f5fdd9)
Previously, shouldFailoverMonImmediately() was called only when a mon first went out of quorum. If the node gets deleted after the timeout starts, it does not get detected until the timeout expires. Moved the call outside the timeout initialization block so it runs on every health check iteration and detects node deletion immediately.
Fixes#15953
Signed-off-by: Prabhala Tara Aasrita <taraasrita@ibm.com>
(cherry picked from commit aeae61e5be)
Detect OSD encryption from the dmcrypt block path in `getOSDInfo` as a
fallback when the `encrypted` label is missing on pre-label deployments.
Include `osd.Encrypted` in the label check in `makeDeployment` so the
label reflects the actual OSD state on upgrade.
Fixes a bug where upgrading to a Rook version with the `encrypted` label
would set the label to `false` on already-encrypted OSDs, because the
label didn't exist yet and `getOSDInfo` defaulted to `false`.
Signed-off-by: Santosh <sapillai@redhat.com>
(cherry picked from commit fc9e3b54f3)
rook-ceph-exporter should use DNSPolicy ClusterFirstWithHostNet when
hostNetwork is enabled
Signed-off-by: Rohan Gupta <rohgupta@redhat.com>
(cherry picked from commit 17873d3af2)
Clean up stale CRUSH rules after the Ceph mgr starts so rules left behind by pool failure-domain or device-class changes do not accumulate indefinitely.
The cleanup is guarded by a package-level RWMutex. Pool create and update paths hold the read lock while creating and assigning CRUSH rules, while cluster-wide cleanup holds the write lock before listing pools and deleting unused rules. This keeps pool reconciles parallel with each other while preventing cleanup from deleting a rule that another reconcile has just created but not yet attached to a pool.
Keep direct pool-delete cleanup for the pool's current CRUSH rule, make the cluster-wide cleanup best-effort across all unused rules, and add an operator-level ROOK_DELETE_UNUSED_CRUSH_RULES setting for clusters that need to leave unused custom rules in place.
Document the operator and Helm settings, regenerate the Helm chart docs, and add a pending release note for the default cleanup behavior.
Signed-off-by: Asish Kumar <officialasishkumar@gmail.com>
(cherry picked from commit 24a35e4e74)
Ceph relaxed the stretch mode CRUSH weight check in ceph/ceph#66580 to
allow weights within 10 percent of each other. This change is available
in Ceph Umbrella and was backported to tentacle v20.2.2 via ceph/ceph
number 67790. The squid backport is still pending.
Signed-off-by: Lumir Sliva <61183145+lumir-sliva@users.noreply.github.com>
(cherry picked from commit 27f95f2feb)
The floating mon in a TNF cluster is designed to share a node with a pinned mon. Fixed the pre-cluster start evaluation logic to allow the same when allowMultiplePerNode is set to false.
Signed-off-by: Prabhala Tara Aasrita <taraasrita@ibm.com>
(cherry picked from commit 8e205b194c)
When an OSD is purged and reprovisioned, it comes back without the
correct CRUSH device class. NVMe devices configured with
deviceClass: nvme in the CR end up as ssd.
Root cause: the operator sets ROOK_OSD_CRUSH_DEVICE_CLASS on prepare
jobs but not on OSD deployments. During re-discovery
(GetCephVolumeRawOSDs), the daemon reads this env var, finds it
absent, and falls back to auto-detected deviceType which returns ssd
for NVMe.
Fix: add crushDeviceClassEnvVar(osd.DeviceClass) to the OSD
deployment spec in spec.go, alongside the existing
dataDeviceClassEnvVar. Existing deployments pick up the new env var
on operator reconciliation without manual intervention.
Fixes#17227
Signed-off-by: David Orman <ormandj@corenode.com>
(cherry picked from commit 1357d71177)
The mon PDB was previously only being adjusted
during mon failover, where the maxunavailable was set to 0
before failover, then reset to 1 after failover. This allowed
for a race condition where one mon had been drained and is
not fully back in quorum before the next mon is allowed to drain.
This is now prevented by disallowing drains until a mon
is fully back in quorum. Anytime a mon falls out of quorum,
the mon pdb will be adjusted to prevent further drains
from causing a mon quorum outage.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 80b50969b2)
Ceph incorrectly raises the MON_NETSPLIT health warning in stretch cluster configurations. Added a call to MuteHealthWarning() in postMonStartupActions() which runs `ceph health mute MON_NETSPLIT --sticky` to suppress the warning during reconcile. All errors are logged as warnings and the reconcile proceeds.
Signed-off-by: Prabhala Tara Aasrita <taraasrita@ibm.com>
(cherry picked from commit eccc8128af)
When osd versions are being detected, log more info
about the versions to understand better if the
require-osd-version release is being set as
expected.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
for tnf, adding initial api changes and implementation for floating mon.
The current pr follow embeded yaml approach for creating floating mon
deploymen instead of configmap approach.
Signed-off-by: subhamkrai <srai@redhat.com>
Clean up stale exporter deployments whose target node no longer exists.
This handles the case where the operator was down when a node was deleted,
so the deletion event was missed and the stale deployment was never removed.
Signed-off-by: Muhammad Adil Ghaffar <muhammad.adil.ghaffar@est.tech>
When reconciling the crash collectors and exporters, if one cluster
has disabled them, they will be deleted, then the reconcile
will complete, thus skipping reconcile of the crash collectors
and exporters for the remaining clusters.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Remove the exporter deployment when needed as best effort
in case the removal fails, there is no need to block other
reconcile.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Rook no longer supports earlier than Ceph v18, so remove the
obsolete version checking in the ceph exporter reconcile.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The osd unit tests periodically fail with a timing issue
when canceling an orchestration. Attempt to stabilize
the test with a longer timeout before canceling the
test.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
the ceph exporter port was hardcoded to 9926, preventing
co-location of exporters from different ceph clusters on
the same node. add a port field to cephexporterspec so
users can override it via spec.monitoring.exporter.port.
Signed-off-by: Oded Viner <oviner@redhat.com>
We should set OSDInfo.DeviceType if "device-type" label is
set on the corresponding Deployment. Otherwise, Rook
deletes this label on Update.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Update `lockbox.keyring` rotation for encrypted OSDs to ensure the key
is not lost if the init container fails but continues assuming
(reasonably) that the key is likely still relevant.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Previously, if the OSD cephx-keyring-update init container couldn't
contact the mons, the output redirect would overwrite the on-disk
keyring file with no text, removing the on-disk keyring.
Modify the init container to only overwrite the keyring file when the
ceph command to get the latest key suceeds, to avoid removing the
on-disk key.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
with controller runtime latest version vO.23.0, golangci lint
is complaining about deprecated api deprecated.
This commit updates the api and adds the requried rbacs
Signed-off-by: subhamkrai <srai@redhat.com>
similar to other ceph pods like osd,mon,mgr,mirror
pod this commit add log collector container to the
main exporter pod to rotate the logs of exporter pod.
Signed-off-by: subhamkrai <srai@redhat.com>