Alerting on controller-runtime's workqueue_depth can be useful for
debugging controllers. Also having a prometheus target for a pod gives
another data point that the system is working as expected. It is useful
for uptime alerts.
Make the bind address configurable via the configmap while still retaining the default
behavior that it is disabled.
Resolves: #14538
Signed-off-by: Justin Cichra <jcichra@cloudflare.com>
(cherry picked from commit 74a79b24b3)
The jobs to detect the ceph and csi versions now can have
custom annotationso and labels added to them. They are
very short-lived jobs, but they may need custom annotations
in some environments to run.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 5014d5bcf2)
The ceph base image removed the ip tool, so we add
it into the rook image.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 4e2447277f)
Since Reef v18.2.4 is released, set it to the default
ceph version that is deployed with Rook.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit e26920a483)
# Conflicts:
# deploy/examples/images.txt
This commit adds the flexibility to configure kube apiserver qps
as per the user requirement and also keeps the existing values as
the default one.
Signed-off-by: yite.gu <yitegu0@gmail.com>
(cherry picked from commit 80541a23c9)
In order to help users check that they have implemented the newly-added
Multus host configuration prerequisites, add a check to the validation
tool to verify connectivity.
Because users who are already running clusters with Multus enabled, add
a flag that allows users to only check for host configuration
prerequisites. This mode will not start the large number of clients that
would normally be started because those clients could disrupt a running
Rook cluster negatively.
Host checking pods require host network access. Many Kubernetes
distributions have pod security features enabled. In order to allow
non-Vanilla distros to run this tool, allow specifying a service account
that pods will run as, which can be configured by the admin to allow
test pods.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
(cherry picked from commit 33f5407dd4)
# Conflicts:
# Documentation/CRDs/Cluster/network-providers.md
# deploy/examples/multus-validation.yaml
initially, we have the limit of 40 char set on
storageclassdeviceset.Name but seems like that is not enough and
upgrade clusters can face issue with this. So, increasing the limit to
50.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit 1dcc99ec1d)
Prometheus found duplicate series for the match group `pool_id`
and `instance` when evaluating the CephPoolGrowthWarning alert
expression. This alert has an evaluation interval of 2 days and
did not consider the changing POD names during the Rook migration process.
This commit adds the `pod` label to the set of considered labels.
Signed-off-by: Matej Feder <matej.feder@dnation.cloud>
(cherry picked from commit 6ba084f35a)
The endpoint property honorLabels: true should be set so that
different rgw instances can show separate prometheus
values instead of being aggregated.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit eed1033485)
Pick up the latest ceph prometheus rules from the ceph repo
found at https://github.com/ceph/ceph/blob/master/monitoring/ceph-mixin/prometheus_alerts.yml.
The updates include new rules for monitoring of ceph as well as
adjustments related to the Rook ceph deployment.
List of main adjustments:
- Alerts related to cephadm are excluded
- The PrometheusJobMissing alert is adjusted for the rook-ceph-mgr job, and the PrometheusJobExporterMissing alert is added
Signed-off-by: Matej Feder <matej.feder@dnation.cloud>
(cherry picked from commit c0a0a3c7b2)
Exporter service created by rook operator contains the following labels:
`app=rook-ceph-exporter,rook_cluster=<cluster-name>`
Label `ceph_daemon_id=exporter` is not there and therefore the service
monitor selector can not discover the exporter service.
This fix removes the `ceph_daemon_id=exporter` label from the exporter
service monitor selector.
Signed-off-by: Matej Feder <matej.feder@dnation.cloud>
(cherry picked from commit 7053e761da)
When the clusters reach full, nearfull, or backfill full thresholds
ceph will raise health warnings and stop allowing IO or backfill
depending on the threshold. These settings require special ceph
commands instead of being generic ceph config. Allow these settings
to be set from the CephCluster CR in the spec.storage
section.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit e479b051bc)
This PR adds a `settings` option in the `Module` struct
which can help users to futher customize the `balancer`
module with a differet mode.
Signed-off-by: sp98 <sapillai@redhat.com>
(cherry picked from commit 1ad37ecce9)
Afte pylint was updated to version 3.2.0
a set of new errors appeared. This makes
ci passing by either fixing the problem
or ignoring it in the check
Signed-off-by: NymanRobin <robin.nyman@est.tech>
(cherry picked from commit dcec080468)
LVM-based OSDs on PVCs are legacy and are not well tested.
Therefore, we add status to the cephcluster CR that at least
gives a clue that the OSDs should be replaced.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 3628e83892)
there are some cases where storageClassDeviceSets length
are more 63 chars and osd provisioned failed due to this.
with error
```
failed to run osd provisioning job for PVC "ocs-deviceset-*-local-volume-storageclass-0-data-*": Job.batch "rook-ceph-osd-prepare-*" is invalid: [spec.template.spec.volumes[10].name: Invalid value: "ocs-deviceset-*-local-volume-storageclass-0-data-*": must be no more than 63 characters, spec.template.spec.containers[0].volumeMounts[9].name: Not found: "ocs-deviceset-*-local-volume-storageclass-0-data-*",
```
Using x-validator to limit the maxLength to the deviceClassSet.Name to
40 chars and adding code check that overall pvc name should be less than
63 chars.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit 6f5cc9b01d)
This PR will add separate directory to handle the external manifest. Here external manifests will have same namespace (rook-ceph) for external cluster.
Signed-off-by: smoshiur1237 <moshiur.rahman@est.tech>
(cherry picked from commit dab17f72a1)
The following printcolumns were added
CephBlockPoolRadosNamespace: Phase,
BlockPoolName, Age
CephFilesystemSubVolumeGroup: Phase,
FilesystemName, PinningConfig, Age
Also improved the error messages in
SubVolumeGroupClient
Signed-off-by: NymanRobin <nyman.robin@gmail.com>
(cherry picked from commit 70a7e61da5)
For check if cluster PGs are healthy before osd updates
Which helps gainning more confidence in the osd upgrades
Signed-off-by: mmaoyu <wupiaoyu61@gmail.com>
(cherry picked from commit 6d4afe23e5)
cephfs subvolumegroup supports creating svg
with quota and the datapool, This PR adds the
support for the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit f57a8b6bbe)
make the kubectl output for crds more verbose.
Following changes was done for each crd:
CephBlockPool:
Added print columns:
- Type
- FailureDomain
- Replication
- EC-CodingChunks
- EC-DataChunks
- Age
Extended info field of status to include:
type and failureDomain
CephObjectStore:
Added print columns:
- Endpoint
- SecureEndpoint
- Age
Added Age to print columns of following crds:
CephObjectStoreUser, CephObjectZoneGroup,
CephObjectZone, CephBucketTopic, CephClient,
CephRBDMirror, CephFilesystemMirror,
CephFilesystemSubVolumeGroup
Signed-off-by: NymanRobin <nyman.robin@gmail.com>
(cherry picked from commit 17adb16d0b)
csi pr get merged ceph/ceph-csi#4459
so, This reverts commit 812a9c02b0.
The csi PR removes the dependency of the pool parameter from the
rbd storage class if the topology pools are passed,
so removing them in the examples and making it optional
Signed-off-by: parth-gr <partharora1010@gmail.com>
Few day's back go 1.22 is release. Let's add that
as valid version to build on. Also, adding 1.22 as
test matric for linux build CI.
https://tip.golang.org/doc/go1.22
Signed-off-by: subhamkrai <srai@redhat.com>
Travis Nielsen
Justin Cichra
yite.gu
Blaine Gardner
subhamkrai
Matej Feder
sp98
NymanRobin
smoshiur1237
Praveen M
parth-gr
NymanRobin
mmaoyu
Madhu Rajanna
Liang Zheng
subham rai