Setting ceph cluster as the ControllerRef
for the holder daemonset set so that when
a ceph cluster is deleted the holder daemoset
will also gets deleted.
fixes: #12645
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit d7a4f0038c)
Adding maxUnavailable parameter to the cephfs csi daemonset. The
default value of maxUnavailable = 1 can make the upgrade process
slower in environments with large number of nodes.
Fixes: #12636
Signed-off-by: karthik-us <ksubrahm@redhat.com>
(cherry picked from commit 2675c976d5)
in the existing node watcher, we'll check for node update
event and see if there are `out-of-service` taints are applied
and `ROOK_WATCH_FOR_NODE_FAILURE` is enabled in rook-ceph-operator-configmap,
if then we'll create the networkFence cr and delete the cr if nodes come back.
And, added the unit test too.
Signed-off-by: subhamkrai <srai@redhat.com>
adding drop `ALL` capabilities in rook operator container
as this is not required and will remove warning in ocp cluster.
Signed-off-by: subhamkrai <srai@redhat.com>
This commit removes code related to betav1CsiDriver
since minimum k8s version support by rook is now
k8s v1.22 which does not support betav1 csi driver crd.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit removes k8s version check for oidc token
which required k8s v1.20 or above since minimum
k8s version that rook supports now is v1.22.
Signed-off-by: Rakshith R <rar@redhat.com>
Currently the holder daemonset is never updated
which will leaves the images the daemonset also
not updated. we should update the daemonset
template but not restart the csi holder pods
which causes the CSI volume access problem,
set the updateStrategy to OnDelete (already set in
yaml files) which allow us to update the holder
daemonset but not restart/update the pods, when a
pod is deleted or node is rebooted
the new changes will take effect.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The msgr2 conversion assumed the endpoints were formatted
with a single :, which is not compatible with ipv6.
Now if the endpoint ends with the v1 port, it will
simply update the prefix to v2.
Signed-off-by: travisn <tnielsen@redhat.com>
adding a option to make AttachRequired field
as configurable and added a comment to explain
the consequences of changing the default value
resolves: #11805
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
When msgr2 is required, ensure the mon endpoints passed to
the csi configmap are on port 3300. The mons will be
listening on both 6789 and 3300. Existing volumes can
continue using port 6789 while new volumes will use
port 3300.
Signed-off-by: travisn <tnielsen@redhat.com>
This commit adds code to supply variables required
to enable read affinity for rbd volumes.
It leverages `read_from_replica=localize,crush_locations=key:value`
krbd map option from ceph to serve reads from the most local OSD.
refer:
https://docs.ceph.com/en/latest/man/8/rbd/#kernel-rbd-krbd-options
Signed-off-by: Rakshith R <rar@redhat.com>
Rook will now append internal default versions to custom
csi image variables passed down if version is missing in
them.
This will enable users using their private registries to
just pass different image names while rook takes care
of adding default versions to them.
Resolves: #10529
Signed-off-by: Rakshith R <rar@redhat.com>
we need to set the variable in the template
instead of the global variable for the
template rendering.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
When mirror logs are enabled, `ceph osd pool get <poolname> all` command returns peer pool info along
with the debug logs. This causes error while parsing the logs for json
data. Using --out-file flag saves the json data in the file which can be
parsed easily while logging will still be written to stdout/stderr.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The default value of maxUnavailable of daemonset is 1.
Sometimes the upgrade can be slow due to this setting.
So I add a parameter to change the value for rbd daemonset.
Signed-off-by: Shinya Hayashi <shinya-hayashi@cybozu.co.jp>
Co-authored-by: Toshikuni Fukaya <toshikuni-fukaya@cybozu.co.jp>
Co-authored-by: Yuji Ito <llamerada.jp@gmail.com>
This updates the cephcsi to latest 3.7.2
release and also updates sidecar to the latest
release in some missing files.
Note:- sidecar images are upto date in most of
the places, in some places it was missing, This
PR updates it in missing place.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The omap generator sidecar is the one who
sets the pvc name and clustername in the metadata
if the pv is re-attached to a new pvc or if the
clustername changes, for that reason we need to
set these flags on the omap generator sidecar
also.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Introduce a new env variable ROOK_CSI_IMAGE_PULL_POLICY in rook operator configmap which should be used to
customize the imagePullPolicy for the csi driver and imagePullPolicy property in cephVersionSpec for ceph pods.
Signed-off-by: Avan Thakkar <athakkar@redhat.com>
if Multus is enabled the clusterinfo should be updated with
network as multus as to run the ceph cmds in remote
executor
Signed-off-by: parth-gr <paarora@redhat.com>
On removing or setting params to false in operator config map, make sure
to set CSIParam to their appropriate defaults, since we are not restarting the
operator we cannot just assume these params/variables/flags are defaulted,
everytime we need to makesure some defaults are specified.
This is what happens without these changes:
* Set CSI_ENABLE_METADATA to true, this will tune CSIParam.CSIEnableMetadata
to true from false
* Create a PVC and check the metadata is added to the rbd/cephfs volumes
* Now Set CSI_ENABLE_METADATA to false, we assume CSIParam.CSIEnableMetadata
will be set to false, but that is not happening because the earlier value
of `CSIParam.CSIEnableMetadata = true` still persist.
(we are not restarting operator to assume value of CSIParam.CSIEnableMetadata
to be reset to false)
This happens with CSI_ENABLE_OMAP_GENERATOR and many other flags too,
fixing them all with these changes.
Thanks to Madhu for debugging the issue and testing it along.
Credit: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
This option open-up volumes and volumemounts
for user customization of the rbd,cephfs,nfs
plugin daemonset.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This commit adds topology provisioning
support. This makes modification to rbac,
csi deployment and daemonset.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit removes controller-ip parameter from
csi-addons sidecar as it is no longer required to be
passed.
Signed-off-by: yati1998 <ypadia@redhat.com>
The volume replication operator is being moved to
kubernetes-csi-addons. This commit hence, removes
the volume replication sidecar and updates the
related documentation.
It will also update the csi-addons sidecar version
to the latest one.
Closes: #10655
Signed-off-by: yati1998 <ypadia@redhat.com>
findCSIChange will work only for single
line values/configration in the configmap,
If the value is multiline the regex will not
be able to indentify the change because of this
one no configurations will be applied to the
csi driver. Removing this check so that if there
is any update on the configmap we will
reconcile the csi driver.
Note:- This might looks heavy but updating of config
map is not a frequent event.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Madhu Rajanna
karthik-us
Travis Nielsen
subhamkrai
Rakshith R
Blaine Gardner
Santosh Pillai
parth-gr
Humble Chirammal
Avan Thakkar
Prasanna Kumar Kalever
yati1998