We have been having many issues with external mode with Ceph version
mismatching. The operator would have a Ceph version different than the
external cluster. The `radosgw-admin` was used to interact with S3
users, even a small version delta would cause the command to coredump.
After checking with the rgw core team it appears Rook was misusing the
CLI and the admin ops API should be used instead.
So this patch is the first introduction of go-ceph in Rook to consume
the rgw admin ops API instead of the `radosgw-admin` CLI, **only** for
user management in this initial commit.
Later we can do more such as bucket operation, zone management etc.
Closes: https://github.com/rook/rook/issues/7924
Signed-off-by: Sébastien Han <seb@redhat.com>
radosgw-admin may output logs before and after JSON when this command succeeds. We should
get rid of these logs before unmarshaling output. Although the logs before JSON were
treated in PR7354, the logs after JSON weren't.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Work around issue https://github.com/rook/rook/issues/7573
and make sure integration tests check for regressions.
Eventually we should use the RADOS Gateway admin REST API, but for now
we need to work around an issue where the built version of
'radosgw-admin' has incompatibilities with the RADOS Gateway version
running in the Ceph cluster.
Of note, Rook built on the Ceph Pacific image will not support
some 'radosgw-admin' commands to Ceph Nautilus (v14) or Octopus (v15)
clusters.
Further complicating matters, the flag used for the workaround changes
between Ceph v16.2.0 and v16.2.1 (both Pacific).
This bug needs to be treated a little differently than most of the ways
Rook handles different commands for different Ceph versions because this
is based on the Ceph version that is installed in the container with the
Rook operator primarily and not the version of Ceph running in the
cluster.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Sometimes `radosgw-admin` succeeds after showing logs to stderr. We should
skip non-json strings if parsing output as json.
Here is an example.
```
2021-02-26 04:10:44.190418 I | op-bucket-prov: creating Ceph user "ceph-user-aSzNqgE7"
E0226 04:11:37.901310 8 controller.go:199] error syncing 'logging/loki-bucket': error provisioning bucket: Provision: can't create ceph user: error creating ceph user "ceph-user-aSzNqgE7": failed to unmarshal json. 2021-02-26T04:11:21.425+0000 7f6714be4980 1 robust_notify: If at first you don't succeed: (110) Connection timed out
2021-02-26T04:11:21.426+0000 7f6714be4980 0 ERROR: failed to distribute cache for ceph-hdd-object-store.rgw.meta:users.uid:ceph-user-aSzNqgE7
2021-02-26T04:11:32.168+0000 7f6714be4980 1 robust_notify: If at first you don't succeed: (110) Connection timed out
2021-02-26T04:11:32.168+0000 7f6714be4980 0 ERROR: failed to distribute cache for ceph-hdd-object-store.rgw.meta:users.keys:23Z8GUEXR0TJDO86PSJR
{
"user_id": "ceph-user-aSzNqgE7",
"display_name": "ceph-user-aSzNqgE7",
...
"mfa_ids": []
}: invalid character '-' after top-level value: failed to unmarshal json.
```
In this case, some logs like "robust_notify:..." was shown in stderr.
Unmarsharing was failed due to tried to parse these logs as json.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
When creating object store, `radosgw-admin realm get ..` command is stuck forever when required number of OSDs are not available. Because of this the uninstall of object store is also stuck. User has to manually remove the finalizer to delete the object store.This PR uses `ExecuteCommandWithTimeout` for running `radosgw-admin` command. Timeout during installation will be reconciled. Cleanup will be treated as best effort. Any errors during uninstalling of single site object store will only be logged.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
- Add realm/zone group/zone to Object Context,
so that any call to runAdminCommand has the
same realm, zone group, and zone as the object
store that the call is going to.
- Also modify the delete code for the object-store
using multisite to remove the endpoints of an
object store from a zone instead of the normal
clean-up
- Added more debug logging all around the object-store
code related to multisite
- files generated by rerun of `make codegen`
- change back the edit on the Copyright in object.go
Signed-off-by: Ali Maredia <amaredia@redhat.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
For the CephObjectStore, the Status field of the CR has a new property
called "info", which contains a couple of information about the CR.
The first new addition is the endpoint of the object store.
Signed-off-by: Sébastien Han <seb@redhat.com>
We have introduced a new goroutine to check the state of the rgw
endpoint. It will run every minute and perform operations on a bucket.
The success or failure will be reported as part of the status field of
the CephObjectStore CR.
A good status will look like:
status:
endpointStatus:
lastChanged: "2020-06-25T13:47:45Z"
lastChecked: "2020-06-25T13:48:46Z"
phase: Connected
A failed status:
status:
endpointStatus:
details: |-
error creating bucket "rook-ceph-internal-s3-bucket-checker": RequestError: send request failed
caused by: Put http://rook-ceph-rgw-my-store.rook-ceph:8080/rook-ceph-internal-s3-bucket-checker: dial tcp 10.108.189.148:8080: connect: connection refused
health: ERROR
This check works for both converged and external modes. Note that the
CephObjectStore CRD has a new field called "externalRgwEndpoints" which
allows you to define a list of IP addresses pointing to rgws.
Closes: https://github.com/rook/rook/issues/5692
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit contains CR implementations for:
CephObjectRealm
CephObjectZoneGroup
CephObjectZone
Also there are changes made to the objectstore
to add rgws in the object-store to zones and
zone groups in a multisite configuration and
the removal of the --default parameter for any
realms/zonegroups/zones that are created.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
When a user or a bucket does not exist anymore, let's stop the reconcile
loop instead of waiting forever.
Also, unlink the user before deleting it otherwise the deletion fails.
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently, we need to configure the Ceph external Admin keyi
in the Rook deployment to be able to connect to an external Ceph cluster.
If we wanted to run in a multi-tenant fashion
were several K8s/Rook clusters wanted to connect to the same external ceph cluster,
each K8s deployment would have the access to the External Ceph Admin key
and could potentially access or delete the Data
from pools that belong to other k8s/Rook Clusters.
Now the admin key is optional but the helper script create-external-cluster-resources.sh
will help create the necessary keys/users to connect to that cluster.
Closes: https://github.com/rook/rook/issues/4917 and https://github.com/rook/rook/pull/5227
Signed-off-by: Sébastien Han <seb@redhat.com>
The helpers for executing a process have long required an actionName
param which is not being used. Now we remove the old param
while also cleaning up various other usages of the exec
package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ceph commands are now only written to the log in debug mode.
For commands that change the system state we now ensure that
a useful log entry is written. If all the details of the ceph
commands are needed, debug logging should still be enabled.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Now, the CephObjectStoreUser CRD is managed with the controller-runtime.
So the watcher is outside of the main controller reconciliation loop of
CephCluster which brings numerous benefit such as:
* having its own reconciliation loop
* won't block anything from the main CephCluster controller loop
* fast than waiting for CephCluster loop to completion
Partially close: https://github.com/rook/rook/issues/1981
Signed-off-by: Sébastien Han <seb@redhat.com>
Configure the Ceph rgw daemon completely from the operator a la the
recent changes to the Ceph mon, mgr, and mds operators.
Create the rgw deployment or daemonset first, and then create the
keyring secret for the object store with its owner reference as the
corresponding deployment or daemonset. When the replication controller
is deleted, the secret is also deleted.
The RGW's mime.types file is now stored in a configmap with a different
file created for each object store. This is primarily just a means to
get the mime.types file into the rgw pod, but the added benefit is that
the administrator can modify the configmap, which could reduce
susceptibility to file type execution vulnerabilities (worst case).
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Sébastien Han
Satoru Takeuchi
Blaine Gardner
Santosh Pillai
Ali Maredia
Travis Nielsen
Madhu Rajanna
Blaine Gardner