- When an osd is marked out, and it is safe to be destroyed then delete the osds deployment.
- Removed osdGracePeriod
- Updated unit tests to test osd marked out action
Signed-off-by: rohan47 <rohgupta@redhat.com>
When OSDs are running on Nautilus we always disable old osd features and
aplpy the onces for Nautilus as described in the upgrade doc.
During an upgrade or the next time an orchestration will be called the
command will be applied. The command is idempotent so we can run it each
time.
This can be backported for 1.0.3
Closes: https://github.com/rook/rook/issues/2960
Signed-off-by: Sébastien Han <seb@redhat.com>
- Updated code to use deviceClass property when a pool is created for both "replicated" and "erasure code".
- Updated "ceph crush rule create-..." command to use "create-replicated" instead of "create-simple"
- Updated unit tests
- Updated (ceph-pool-crd.md) documentation to reflect the changes.
- Updated pending release notes.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
this adds a structure to hold various settings related to executing ceph
cli commands, and introduces a common interface for configuring and
running such commands.
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
This reverts commit b7a564e929, reversing
changes made to 6996571b5c.
Reverting: Linking ceph noout to a node taint.
The taint is applied for reasons other than maintenance as well.
This also needs a way to respect user-set noout.
Need to revisit this with a better design.
Signed-off-by: Rohan CJ <rohantmp@gmail.com>
This commits allows the upgrade from Mimic to Nautilus to work by:
* removing the v2 brackets on the operator ceph config file generation,
we stick with v1 and can revert this back once we deprecate mimic there
is no rush since mons keep on listening to v1.
* enable messengers 2 when the cluster runs on Nautilus
Fixes: https://github.com/rook/rook/issues/2973
Signed-off-by: Sébastien Han <seb@redhat.com>
A ceph filesystem was brought down by marking the filesystem
as down and individually failing the MDSes. From nautilus onwards,
this could be more simply and efficiently done by using
`fs fail` command. See,
https://github.com/ceph/ceph/commit/4c49f165ec1Resolves: #2841
Signed-off-by: Ramana Raja <rraja@redhat.com>
The CephCluster resource will now expose the health of the ceph cluster
so admins can query the status with k8s api or kubectl instead of
needing to run the rook toolbox. The operator will query the
ceph status periodically and update the status in the custom resource.
Signed-off-by: travisn <tnielsen@redhat.com>
Update integration test suite fails on an error with getting the keyring
for the mgr. The mgr's cephx capabilities have changed and need to be
updated before get, create, or get-or-create can be called. Since other
daemons' caps may change in the future, make an attempt to update the
user's caps on any key generation. This makes the key generation more
declarative from within the operator code for individual Ceph daemons.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Nautilus has an issue targeting Luminous when running the rbd info command.
Rook already has the info it needs for the call and can return it
after the rbd create command succeeds.
Signed-off-by: travisn <tnielsen@redhat.com>
The basic idea here is to replace the release name in the ClusterInfo
object with the fine grained version information queried at runtime.
This patch also removes the Name field from the cluster spec, which was
also runtime determined and was redundant with ClusterInfo relase name.
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
From ceph mimic (13.x) onwards, `mds deactivate` command is
deprecated. To scale down the number of active MDSes of a filesystem,
it's sufficient to set the desired number of active MDSes using
'max_mds' setting, and is no longer required to individually
deactivate the unwanted MDSes.
Resolves: #2725
Signed-off-by: Ramana Raja <rraja@redhat.com>
The MDS mds_standby_for_*, mon_force_standby_active, and mds_standby_replay
configuration options have been obsoleted. Instead, the operator may now set
the new "allow_standby_replay" flag on the CephFS file system. This setting
causes standbys to become standby-replay for any available rank in the file
system.
Closes: https://github.com/rook/rook/issues/2768
Signed-off-by: Sébastien Han <seb@redhat.com>
The Ceph CLI has the flag option '--connect-timeout' which controls the
timeout of the command when reaching out to a monitor. If the connection
cannot be established within 15 seconds, the command will fail. The
default value in Ceph is relatively long (300sec IIRC). This is a
problem when monitors have trouble reaching out quorum, since this means
the command will only fail after 300 sec.
Now we fail faster.
Resolves: https://github.com/rook/rook/issues/2574
Signed-off-by: Sébastien Han <seb@redhat.com>
Introduce mount security mode for basic multi tenancy
Fixes#2164.
This adds three new parameters/options to StorageClass/flexvolume entry:
* `mountUser`
* `mountSecret`
* `mountSecretNamespace`
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
This seems a bit misplaced, since CreateFilesystem is all about
doing the initial setup of the filesystem, and the daemons are
managed in a different block of code.
In a later patch, we're going to want to allow the CRD to spin
up MDS' for filesystems that already exist. Lift the code that
sets the MDS count into the caller.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
fix#2193
Fix regression introduced by PR allowing MDS config creation in init
container. This allows the new deployment-based mds clusters to scale
down where currently they can only remain constant or scale up.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Progress toward issue #2003.
Includes design from design doc PR #1578
Use init containers to create configuration for Ceph mgrs. There is only
one init container in this design. The init container calls the Rook
binary to create Ceph config files which are then shared with the mds
daemon main container.
Once this init is run, the main mds daemon is run. Leaving room to use
the Ceph-versioned image in the future, call `ceph-mds --foreground ...`
to run the Ceph mds.
The refactor to using an init container also necessitated refactoring
the mdses replicaset implementation to a deployment-per-pod
implementation due to a chicken-egg problem. With a single container (in
the before times) the Rook binary was able to call the ceph-mds daemon
with an id generated from the pod name. Since the pod name is not known
before runtime, and the id is one of the few params that must be
specified to Ceph daemons on run, it is necessary to know the id
beforehand; thus the move to a deployment architecture following the
likes of the mon and mgr daemons.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
While creating a PVC, if the operator dies between successfully creating a rbd
image and associating it with a PV, that PVC will never be completed. A
restarted operator will also fail to complete the task as the requested rbd
image already exists. With the assumption that a PVC UID will always be unique,
this patch will try to use the existing volume and complete the PVC request.
Resolves: #2072
Signed-off-by: Ganesh Maharaj Mahalingam <ganesh.mahalingam@intel.com>
Current code will truncate the generated RBD image in some cases,
this PR will round up the size to make sure the final RBD image
generated can cover all the required data space.
Also, corresponding unit test cases added to verify the change.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Previously, if this failed mid-way it would then throw
an exception at the first operation when retrying (because it's
trying to reweight an OSD that might not be in the map any more)
Signed-off-by: John Spray <john.spray@redhat.com>
rohan47
Sébastien Han
Santosh Pillai
Noah Watkins
travisn
Rohan CJ
Maximilian Mack
Ramana Raja
Blaine Gardner
Jeff Layton
Alexander Trost
Andrey Laguta
Bogdan Luca
Ganesh Maharaj Mahalingam
Dennis Chen
John Spray