We can now collect logs directly into a side-car container.
A new CRD spec has been added:
spec:
logCollector:
enabled: true
periodicity: 24h
Every 24h we will rotate log files for each Ceph daemon.
Signed-off-by: Sébastien Han <seb@redhat.com>
We must add the finalizer right after the object creation otherwise the
seerver will later return an error on update that the object has been
modified. Indeed, it has been by the task that updates the status when
the object is first created.
Signed-off-by: Sébastien Han <seb@redhat.com>
The NFS reconciler was not updating NFS daemons that already existed.
The controller would fail to update daemons if the number of active
daemons did not increase or decrease.
Make sure existing NFS daemons are updated to new versions with all
scale up and scale down events.
Resolves#6611
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Found by running the following command:
codespell -S .git,*.png,*.jpg -L \
aks,keyserver,atleast,dne,ser,ist,files\',ba,dum,iam,te -f -H
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
In cephadm and volume/nfs module, all ganesha daemons within a cluster watch
single config object. Each ganesha daemon in rook watches it's own config
object. This patch updates the ganesha config object name to maintain
uniformity.
Signed-off-by: Varsha Rao <varao@redhat.com>
Ganesha daemons don't need to acess ceph cluster with admin capabilities.
Instead new user with restricted caps can be used.
Signed-off-by: Varsha Rao <varao@redhat.com>
this commit handle golangci-lint linter staticcheck error.
`staticcheck` - Staticcheck is a go vet on steroids,
applying a ton of static analysis checks.
To see only `staticcheck` linter output
`golangci-lint run --disable-all -E staticcheck`
Signed-off-by: subhamkrai <srai@redhat.com>
this commit will enable one more linter ineffassign
in golangci-lint.
This linter throws an error when variable is assigned and never used.
`golangci-lint run --disable-all -E ineffassign` is used detects ineffassign
errors only.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
This allows users to specify additional labels to be added to the components
created by the Rook Ceph operator.
Additionally the rbd mirrors are now getting their annotations and
labels set.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
The labels cannot be updated on a deployment match selector.
In v1.4 a new label was added for ceph_daemon_type that is intended
to be on the pod labels, but cannot be applied to the match selectors.
Therefore, we suppress any new labels that are added to the daemons.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Rename PodLabels function to CephDaemonAppLabels for more clarity about
what the function's purpose is.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ceph config and client packages are conceptually the same.
To avoid circular dependencies in some cases, we simplify by combining
the packages into the client package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Update the base operator image and cluster examples to use the latest
octopus release v15.2.4. Also cleanup some old examples and unit tests
that were still based on mimic.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We can now explicitly set any property on a given pool by using the new
Property field in the CephBlockPool Spec.
Also, this fixes the case where both `CephBlockPool` and `CephCluster`
are created at the same time. When Rook creates the pool, the cluster is
still being bootstrapped and the global option
`osd_pool_default_pg_autoscale_mode` has not bee set yet. So the pool
gets created but its `pg_autoscale_mode` property is set to `warn`
instead of `on`.
Closes: https://github.com/rook/rook/issues/5608V
Signed-off-by: Sébastien Han <seb@redhat.com>
This is the final conversion to controller-runtime conversion. This time the
CephCluster CRD has been converted to use the controller-runtime
library.
The controller incorporates all the previous watchers too, so the Node
and hot-plug configmap are been watched too.
Only the operator setting configmap is not being watcher since it's not
related to the CephCluster CRD.
Not only the patch converts to controller-runtime but also tries to
re-organize the tree of the repo to actually make the code more
readable and have better functions/methods/tests separations.
Closes: https://github.com/rook/rook/issues/4939
Signed-off-by: Sébastien Han <seb@redhat.com>
When updating the status on resources sometimes the update fails due to
the resource being an outdated version. This frequently occurs when
the same reconcile loop updates the status multiple times, or the finalizer
is added, or some other update to the resource. Upon the next reconcile
the error would generally go away since the status or finalizer didn't
need to be updated multiple times. But now the error is not expected
since the controller will retrieve the latest version of the resource
immediately before attempting to update it.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
You can now use Rook along with Multus. Multus must be up and running
and the right ressources must exist such as NetworkAttachmentDefinition
CR.
The Cluster CR spec has new fields to work with multus:
network:
provider: multus (or 'host' for hostNetworking)
selectors:
public: NetworkAttachmentDefinition name
cluster: NetworkAttachmentDefinition name
If only a single NetworkAttachmentDefinition is provided Rook will use
both anyway for the Ceph traffic.
Please refer to the doc to learn more.
Closes: https://github.com/rook/rook/issues/4716
Signed-off-by: Sébastien Han <seb@redhat.com>
This type was a string already and was just making us doing string()
calls all the time to it's not worth it.
Signed-off-by: Sébastien Han <seb@redhat.com>
They are cases where we let the exponential backoff retry and some where
we force our own retry. Let's properly log this information.
Signed-off-by: Sébastien Han <seb@redhat.com>
Let's not wait for the CephCluster to be done reconciling but instead
check for the Ceph cluster status, if it's closed to "ok" then we
proceed so HEALTH_OK and HEALTH_WARN are accepted.
Signed-off-by: Sébastien Han <seb@redhat.com>
The CRD watcher has been replaced by the new controller-runtime
framework.
This brings robustness in our operator, meaning that any resources that
are modified will be reconciled into the desired state.
Closes: https://github.com/rook/rook/issues/4941
Signed-off-by: Sébastien Han <seb@redhat.com>
The helpers for executing a process have long required an actionName
param which is not being used. Now we remove the old param
while also cleaning up various other usages of the exec
package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
As part of the transition to support Ceph release **as of** Nautilus, we
left over that portion of code.
We don't need it anymore.
Signed-off-by: Sébastien Han <seb@redhat.com>
Now, the CephBlockPool CRD is managed with the controller-runtime.
So the watcher is outside of the main controller reconciliation loop of
CephCluster which brings numerous benefit such as:
* having its own reconciliation loop
* won't block anything from the main CephCluster controller loop
* fast than waiting for CephCluster loop to completion
Partially close: https://github.com/rook/rook/issues/1981
Signed-off-by: Sébastien Han <seb@redhat.com>
Do not use the Rook binary to generate minimal config for Ceph's
NFS-Ganesha pods. Instead, `cat` the minimal file in an init container
using the Ceph container.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
This commit is to handle all those unhandled errors which raises the gosec warning.
Fixed G104: Unhandled Errors are handled now
Signed-off-by: Nizamudeen <nia@redhat.com>
When the cluster is upgraded, the child controllers are notified with the
callback to the ParentClusterChanged() method. These should be made
in a separate goroutine so that the cluster controller is not blocked
on the child controllers and also so child controllers aren't blocked
on each other for the upgrade.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We now always perform ok-to-stop change when the deployment is going to
be updated. This could be for various reasons like change in the spec or
a new Ceph image.
In any case, if Ceph resources are going to be restarted this must be
done carefully.
Also trimmed the isUpgrade variable, the upcoming commit will remove the
need of that variable.
Keeping isUpgrade from the controller code since we need it to detect
whether an orchestration upgrade should be triggered or not (based on
the ceph cluster status).
Also, we keep it on the child controllers so we don't go into an
orchestration phase if the cluster image hasn't changed. The child does
not need to be updated/go into its orchestration phase because the
cluster CR changed.
Closes: https://github.com/rook/rook/issues/4379
Signed-off-by: Sébastien Han <seb@redhat.com>
A new CRD option `continueUpgradeAfterChecksEvenIfNotHealthy` is added.
When upgrading, Rook goes OSD by OSD and then waits for PGs to be clean
before proceeding to the next OSD. Currently, Rook waits for 5 hours but
there might be circumstances where PGs need more time to settle.
Thus setting `continueUpgradeAfterChecksEvenIfNotHealthy` to true will
pursue the upgrade process, even if PGs are not 100% active+clean.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786029
Signed-off-by: Sébastien Han <seb@redhat.com>
The operator kit had more utility originally when the operator
was creating and managing the TPRs and CRDs directly. Since
the CRDs are now created from a manifest and no longer by the
operators, the utility of operator kit is limited to the
controller watcher. Since we are moving to the controller runtime
we simplify the code to make the transition smoother. Now
there is only a simple WatchCR method that will need to be
replaced as we maek that transition.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit adds status field for ceph related CRs which will be useful for knowing the ceph component status without checking the logs.
Signed-off-by: Ashish Ranjan <ashishranjan738@gmail.com>
Reduce from 5 minutes to less than 50 seconds the time needed to restart a
mgr and osds(PVCs based),rgw,mds,rbd,nfs and toolbox pod that was running
in a k8s "NotReady" Node.
A new Rook Operator setting has been added to allow the user to set the
time used in pod's toleration <node.kubernetes.io/unreachable>:
ROOK_UNREACHABLE_NODE_TOLERATION_SECONDS = <5>
New setting added in release notes
Addressed @travisn,@leseb, and @blaineEXE suggestions
Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
Sébastien Han
Varsha Rao
Arun Kumar Mohan
Blaine Gardner
subhamkrai
Mateusz Gozdek
subhamkrai
Alexander Trost
Travis Nielsen
Blaine Gardner
Michael Fritch
Madhu Rajanna
Nizamudeen
Ashish Ranjan
Juan Miguel Olmo Martínez