If the object store is not found during deletion of the object store CR,
proceed with the deletion instead of blocking and re-queueing the
deletion reconcile in an endless loop. This was causing instability
in the integration tests.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The command to set or disable the rgw dashboard started
hanging in some scenarios in v15.2.8. For now we start
the rgw dashboard config in a goroutine until this issue
is tracked down. After the issue is fixed in ceph, the
goroutines will no longer be necessary.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Pools in stretch clusters will all use the same crush rule that
is generated by the operator when configuring the cluster for
stretch mode, with replica 4 and two replicas per failure domain.
Pools cannot create new crush rules, so we require that replica be
4 when the pools is created, EC is not allowed, and no new
crush rule will be created.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The CRUSH map does not allow duplicate values (nor keys) for the
labels. That means that if the currently hardcoded label value
`default` occurs anywhere else in the tree (for example, because
some of the topology labels provided by the cloud provider use it),
the cluster cannot sucessfully spawn.
By giving the user control over the label value used for the root
CRUSH map label, it is possible to adapt the cluster to this
situation.
To be able to actually use the `default` value, the root=default
node which is created by default by ceph itself has to be removed;
since that node is accompanied by a replicated crush rule, we have
to remove that rule, too.
The integration tests are modified to sometimes use the custom
crushRoot (based on an arbitrary criterium) to get coverage across
the various suites. Separate tests could be added, but were not
deemed necessary at this point.
Fixes#4993.
Signed-off-by: Jonas Schäfer <jonas.schaefer@cloudandheat.com>
this commit will enable one more linter ineffassign
in golangci-lint.
This linter throws an error when variable is assigned and never used.
`golangci-lint run --disable-all -E ineffassign` is used detects ineffassign
errors only.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
By addding ".svc.cluster.local" to the endpoint of the object store, the
OBC requests won't go through a proxy if any is configured.
Signed-off-by: Sébastien Han <seb@redhat.com>
There is incorrect usage of log functions in the object directory, changing those instances
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
- Add realm/zone group/zone to Object Context,
so that any call to runAdminCommand has the
same realm, zone group, and zone as the object
store that the call is going to.
- Also modify the delete code for the object-store
using multisite to remove the endpoints of an
object store from a zone instead of the normal
clean-up
- Added more debug logging all around the object-store
code related to multisite
- files generated by rerun of `make codegen`
- change back the edit on the Copyright in object.go
Signed-off-by: Ali Maredia <amaredia@redhat.com>
When zones are created the ceph RGWs inside the
those zones should be using pools with the zones
name not the object-store's name
Signed-off-by: Ali Maredia <amaredia@redhat.com>
This commit:
- adds the pull section on the CephObjectRealm spec
to enables realms to be pulled instead of created.
- creates the system user and generates the access
key and secret key for the user and zones in a realm.
- adds "omitempty" to fields in multisite CRs that
are not required
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Make it so that zones & zone groups can be
modified with more than one endpoint so that
more than one object store can be in a zone
Signed-off-by: Ali Maredia <amaredia@redhat.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit contains CR implementations for:
CephObjectRealm
CephObjectZoneGroup
CephObjectZone
Also there are changes made to the objectstore
to add rgws in the object-store to zones and
zone groups in a multisite configuration and
the removal of the --default parameter for any
realms/zonegroups/zones that are created.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
This PR is for rebasing #4683 with master. With new controller runtime changes most the changes with #4683 got redundant.
Only valid change is waiting for all the object buckets to be cleaned up before removing the finalizer.
Co-authored-by: Elise Gafford <egafford@redhat.com>
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
pg_num_min needs to be set on all new and existing rgw
metadata pools so the autoscaler won't immediately
increase the pg count. The pg_num_min was only being set
on existing pools and not on new pools.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Since e396379 rook create rgw metadata pools with 8 PGs instead of
32. But the pg_autoscaler increase it back to 32 as the pg_num_min parameter
is not set on those pools.
Signed-off-by: n.fraison <n.fraison@criteo.com>
The PG count on metadata pools should default to rgw_rados_pool_pg_num_min
instead of the more general default pg count. This means rgw pools
will default to 8 PGs instead of 32 PGs, which means a lot more pools
can be created before hitting the default PG limit.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The pools had some legacy structs that translated between the
ceph.v1 types used by the CRDs and the internal implementation
of the pools. This simplifies the pool implementation by removing
the intermediate model and leaving us only with the ceph v1
pool types and no unnecessary translation.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The pools may already be created by the mgr module. If the pool specs
are not specified in the object CR, skip pool creation for the
object store. The pools are required to exist and the reconcile
will fail until they do exist.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The CRD watcher has been replaced by the new controller-runtime
framework.
This brings robustness in our operator, meaning that any resources that
are modified will be reconciled into the desired state.
Closes: https://github.com/rook/rook/issues/4937
Signed-off-by: Sébastien Han <seb@redhat.com>
The pool size for cephObjectStore (object.yaml), was not getting updated in the cluster upon changing.The reason being that there was an "else" case missing to update the replica size if the pools already existed. That will fix this issue.
Signed-off-by: RAJAT SINGH <rajasing@redhat.com>
When using the "errors" package, using `%+v` (extended format),
each Frame of the error's StackTrace will be printed in detail.
Let's only print `%v` to print the error.
If the error has a Cause it will be printed recursively.
Basically `%+v` has been replaced with `%v` for all `error` type
interfaces, whether the logger is Info, Warning or Error.
Signed-off-by: Sébastien Han <seb@redhat.com>
A new CRD property `PreservePoolsOnDelete` has been added to Filesystem(fs) and
Object Store(os) resources in order to increase protection against data loss.
If it is set to `true`, associated pools won't be deleted when the main
resource(fs/os) is deleted. Creating again the deleted fs/os with the same name
will reuse the preserved pools.
Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
- Updated code to use deviceClass property when a pool is created for both "replicated" and "erasure code".
- Updated "ceph crush rule create-..." command to use "create-replicated" instead of "create-simple"
- Updated unit tests
- Updated (ceph-pool-crd.md) documentation to reflect the changes.
- Updated pending release notes.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Configure the Ceph rgw daemon completely from the operator a la the
recent changes to the Ceph mon, mgr, and mds operators.
Create the rgw deployment or daemonset first, and then create the
keyring secret for the object store with its owner reference as the
corresponding deployment or daemonset. When the replication controller
is deleted, the secret is also deleted.
The RGW's mime.types file is now stored in a configmap with a different
file created for each object store. This is primarily just a means to
get the mime.types file into the rgw pod, but the added benefit is that
the administrator can modify the configmap, which could reduce
susceptibility to file type execution vulnerabilities (worst case).
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Travis Nielsen
Arun Kumar Mohan
Jonas Schäfer
subhamkrai
Sébastien Han
Jiffin Tony Thottan
Jiffin Tony Thottan
Ali Maredia
Santosh PillaiandElise Gafford
Madhu Rajanna
n.fraison
RAJAT SINGH
Owen Tuz
Juan Miguel Olmo Martínez
Blaine Gardner