Let's use the minikube profiles feature to set up a unique profile
exclusively for the Rook cluster. By doing this, we make sure that we
don't run into any issues with other minikube profiles that users
might already have in their local setup.
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
The new create-dev-cluster script errored out for me, not finding the
deploy/examples directory.
This change fixes that problem by making the path relative to the
script's directory, so that it works in a rook code tree from where it
is expected to be run.
Signed-off-by: Michael Adam <obnox@samba.org>
github ci runner is allocating both 14 and 64 Gb disks to the setup.
Rook CI currently hard codes the lsblk with a 14G filter.
This PR updates the filter to use either 14G or 64G disks.
Signed-off-by: sp98 <sapillai@redhat.com>
Adding a new '-m' option for activating monitoring during
cluster setup. With this option turned on, the script will handle the
installation of the monitoring stack and configure the dashboard to
connect to the newly installed Prometheus server automatically.
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
From the Go specification [1]:
"1. For a nil slice, the number of iterations is 0."
"3. If the map is nil, the number of iterations is 0."
`len` returns 0 if the slice or map is nil [2]. Therefore, checking
`len(v) > 0` before a loop is unnecessary.
[1]: https://go.dev/ref/spec#For_range
[2]: https://pkg.go.dev/builtin#len
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Add the ability to specify node profiles in the multus validation test.
This addresses a few points of early feedback on the validation tool.
Statements below critique the tool's behavior before this patch.
1. The tool assumes all daemons are on public and cluster network, which
means users who have a significantly smaller cluster net (a
design choice) cannot run a single test to determine if Rook is
likely to install correctly.
2. The tool does not have placement options to select only a subset of
Kubernetes nodes to run validation on.
3. Users of multus seem to have a dedicated pool of storage nodes more
often than the average Rook install. This makes sense for security-
and perforance-minded users. The tool cannot run a single test to
verify storage-only and general-workload nodes at one time.
These points are addressed by allowing users to specify configurations
for different "NodeTypes."
Each NodeType config has options for selecting the number of OSDs as
well as the number of other (non-OSD) Ceph daemons. This limits the
unnecessary exhaustion of cluster network addresses from critique 1.
Each NodeType config has its own placement (critique 2).
Users can define as many NodeTypes as needed to test the network for
their planned CephCluster. Specifically, this allows the tool to test
storage-only nodes and generalized-workload nodes at the same time. An
arbitrary number of NodeTypes are allowed to support even more highly
specialized cluster setups, such as multiple tiers of storage nodes
where some storage-only nodes may run more OSDs than others.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
The issues are fixed from the clean disk action
repo and we shouldn't require any workaround. Also,
I'm not using git revert to revert the commit is earlier
clean disk action was mentioned in every CI which was
duplicate and now we have placed the action to composite yaml
Signed-off-by: subhamkrai <srai@redhat.com>
Since `google-cloud-sdk` is renamed with `google-cloud-cli`,
the github action is failing to remove the older name and this
is causing ci issues. Applying changes suggested by community to
manually remove some packages to resolve the issue.
Signed-off-by: subhamkrai <srai@redhat.com>
Update the multus canary test to reflect modern knowledge about how it
should be configured.
No longer test for the network device in OSD pods. Pods will utterly
fail to start if Multus is unable to attach interfaces.
Instead, look to the OSD map to test the connections more wholistically.
OSDs must have map IPs that include both public and cluster network.
This implicitly tests that the interfaces exist in the Pod, and it
additionally verifies other details, like Ceph `*_network` configs are
set propertly.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
using `rook/ceph:master` tags take longer time
to pull and also, we should be using `rook/ceph:local-build`
tag for our ci. This will help canary raw test to be more stable.
Signed-off-by: subhamkrai <srai@redhat.com>
rename and move tests/README.md to
Documentation/Contributing/rook-test-framework.md in order to make it
part of the contributing section
Signed-off-by: Javier <sjavierlopez@gmail.com>
The multicluster test was using a different ceph image for the
toolbox than from the original cluster. For efficiency of
pulling images in the test, the toolbox of the external cluster
will now use the same ceph image as the internal cluster.
Signed-off-by: travisn <tnielsen@redhat.com>
The toolbox sometimes times out when the tests are waiting
for it to start. Now we create the toolbox spec sooner in
the tests so we won't need to wait so long for it to start
or increase the wait timeout in the tests.
Signed-off-by: travisn <tnielsen@redhat.com>
Current reason for failure
clients: "cephbuckettopic" "my-topic" exist, but ARN was not set
Added some more re-try as it might take some more time to
update the ARN in status
OBC bound status was failing and going into
race condition adding a seprate timeout
makes recover it from that state
Signed-off-by: parth-gr <paarora@redhat.com>
add a new toolbox yaml manifest which will use the
rook image instead of ceph image
for running s5 cmd container needs to run with rook image
closes: https://github.com/rook/rook/issues/12227
Signed-off-by: parth-gr <paarora@redhat.com>
Let's use same ceph version(latest Reef) in both
cluster-test and toolbox.yaml so that we don't need
to pull image twice. Alos, github action helper script
was calling `deploy_manifest_with_local_build` which
is required for operator.yaml and not for toolbox.yaml.
Signed-off-by: subhamkrai <srai@redhat.com>
for now, let's skip the mgr pod restart count
for upgrade suite 1.22.x to get the CI green
and so that we don't skip any other error in name
of mgr restart count.
Signed-off-by: subhamkrai <srai@redhat.com>
The toolbox image tag was always being set from #12625
even when the image was not set in the test. If the image
is not set, skip replacing the image name to use the default
test version.
Signed-off-by: travisn <tnielsen@redhat.com>
The test is currently only using the ceph version that is
included with toolbox.yaml, which may be different
from the version of the ceph cluster being tested.
Now the version will be replaced to match the desired
ceph test version.
Signed-off-by: travisn <tnielsen@redhat.com>
the upgrade suite for version 1.27.x is failing
due
```
debug 2023-07-24T19:11:20.264+0000 7f3395a82c80 -1 error: monitor data filesystem reached concerning levels of available storage space (available: 5% 4.4 GiB)
you may adjust 'mon data avail crit' to a lower value to make this go away (default: 5%)
```
so adding mon setting to start on `compact` also adding
other setting present in cluster-test.yaml.
Signed-off-by: subhamkrai <srai@redhat.com>
Adding CephCOSIDriver CRD and controller. The controller will bring up
the ceph cosi driver when first object store is created in the rook
operator namespace. Then admin can defined COSI CRDs like BucketClass
and BucketAccessClass for different object stores deployed via Rook.
Using the BucketClass and BucketAccessClass, user can define
BucketAccess for backend bucket in the RGW. The CephCOSIDriver CRD
defines configuration options for ceph cosi driver. In the first version
its usability is minimal. Even if it is not defined Rook will bring up
the ceph cosi driver with default values.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
we need to wait for the rgw pod to be delete and not
only the cephobjectsore, sometime the pod could be in
terminating state. Also, in some place it require proper
command to wait for pod to be ready/delete and get the
pod name only.
Signed-off-by: subhamkrai <srai@redhat.com>
With the upcoming v1.12 release, Rook upgrade tests
should upgrade from v1.11.x to master instead of
from v1.10.x to master.
Signed-off-by: Sheetal Pamecha <spamecha@redhat.com>
currently we just print the error is anything fails in
script for rgw, So by that there is no panic or
failiure of script if something wrong happened,
Added Explicittly forcing to catch the error from
the error message that is thrown
Closes: https://github.com/rook/rook/issues/12244
Signed-off-by: parth-gr <paarora@redhat.com>
Add a CI e2e test for the multus validation routine that runs whenever
the multus validation test is modified and on master/releases.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The integration test guide is updated to be more accurate
and provide more hints that the CI is the recommended
place to troubleshoot the integration tests
Signed-off-by: travisn <tnielsen@redhat.com>
Add a tmate manifest that can be added to CI tests to allow manually
debugging them in real-time while the test is ongoing.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Add a more involved multus validation test to the Rook binary. Because
this is intended to be end-user runnable, make sure operator-only
commands are hidden.
Build this into the rook binary instead of creating a separate binary
for ease, and because any binary built with the kube api becomes 40+
megabytes. We save quite a bit of space by including this in the Rook
binary, which is good for keeping container layers as small as possible.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The journal size was only applicable to the filestore OSD
format which has not been supported by rook since v1.2.
Remove the remaining obsolete setting from the examples and
code.
Signed-off-by: travisn <tnielsen@redhat.com>
Redouane Kachach
Travis Nielsen
Michael Adam
sp98
Sheetal Pamecha
Eng Zer Jun
Blaine Gardner
subhamkrai
Jiffin Tony Thottan
Javier
parth-gr
Blaine Gardner