When there are multiple mgr daemons, the mgr sidecar owns reconciling
the services for the active mgr. However, for efficiency the sidecar
only reconciles the services if the active mgr changes. Now the operator
will also reconcile the mgr services to ensure that services are re-created
after being deleted, or otherwise in an incorrect state.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The stretch clusters pass a new parameter to the mon daemons which is
only available in v16.2.5 and newer. Older versions of Ceph will fail
to run with stretch clusters in rook.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We now pass the networking spec to the clusterInfo so that the executor
can make the right decision on how to execute a command.
This is a small change that allows us to remove the CephBlockPool CR
since it's checking for rbd images. On a Multus deployment, the operator
does not have the network annotations, thus has no access to the OSD
network then rbd commands are hanging forever.
Signed-off-by: Sébastien Han <seb@redhat.com>
The mon daemon in a stretch cluster now can have its location set
as a CLI param instead of setting it with a separate command.
This enables mon failover to set the location of a mon immediately
when it is joining quorum instead of having a delayed command
to set the location.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
when osd pods removed, they are not able
to add back due to missing `ceph auth`
or different `ceph auth`.
this commit mounts the secret `rook-ceph-admin-keyring`
inside the osd activate initcontainer which has
admin keyring.
Signed-off-by: subhamkrai <srai@redhat.com>
The lib-bucket-provisioner was missing the cephCluster spec so the check
in RunAdminCommandNoMultisite would fail.
This is similar to ad54ed8aac just a
different place.
Signed-off-by: Sébastien Han <seb@redhat.com>
The CephClusterSpec was missing from the object context, so the check
for the network provider in RunAdminCommandNoMultisite() was not
discovering the network property correctly.
Signed-off-by: Sébastien Han <seb@redhat.com>
The Rados Gateway Admin OPS API has changed its behavior from Nautilus
to Pacific. Calling user create on an existing user wil generate
additional keys to the user on Nautilus. Where in Pacific it will report
an error with UserAlreadyExists.
So to handle both scenarios, let's first get the user, and if the user
does not exist (NoSuchUser) we then create it.
Signed-off-by: Sébastien Han <seb@redhat.com>
By default, keys stored in Vault KV Secret Engine are versioned and keys
are soft-deleted, see Vault documentation:
When deleting data the standard vault kv delete command will perform a soft
delete.
It will mark the version as deleted and populate a deletion_time timestamp.
Soft deletes do not remove the underlying version data from storage,
which allows the version to be undeleted.
The vault kv undelete command handles undeleting versions. A version's
data is permanently deleted only when the key has more versions than are
allowed by the max-versions setting, or when using vault kv destroy.
When the destroy command is used the underlying version data will be
removed and the key metadata will be marked as destroyed.
If a version is cleaned up by going over max-versions the version
metadata will also be removed from the key.
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to that the access and secret keys were left empty if the user
already existed, which led to updating the secret with empty values when
the operator restarts.
Signed-off-by: Sébastien Han <seb@redhat.com>
When the CephCluster is configured with Multus and multiple networks are
used to deploy Ceph some commands are failing to be executed from the
Operator. These commands, in particular, `radosgw-admin` ones need access
to the "ceph public network" to talk to OSDs. Unfortunately, the
Rook-Ceph Operator does not have the network annotations and thus
doesn't have the networks available and cannot reach OSDs. So the commands end
up hanging and eventually time out.
Applying the annotations to the Operator pod is possible but will result
in restarting the operator too and this should be avoided at all costs.
Also, applying the annotations beforehand is not possible since the
Multus declaration is in the CephCluster specification. So we would have
no idea what to do.
So the current approach runs a new sidecar container in the mgr pod to
act as a proxy for "some" ceph commands, only the `radosgw-admin` ones
for multi-site setup. This is a small container with admin access
running idle waiting for commands to be executed. In a sense, it is
similar to the toolbox but we didn't want to clearly expose it, so
running as a sidecar is quite nice.
Proxying command is obviously not always recommended since we add an
extra hop in the network path. Now each request has to go from the
operator pod to the API server to the remote pod to Ceph. Previously,
the command only goes from the operator to Ceph.
It's worth noting that external mode is not impacted since no rgw pod
is configured. This scenario is flexible and allows us to scale
pretty well since any CephCluster with Multus will see its mgr sidecar
deployed and can then talk to Ceph. We are not limited.
Signed-off-by: Sébastien Han <seb@redhat.com>
It's better to create PDB of RGW if ObjectStore's `instances` field is 2.
In the current implementation, at least three desired RGW instances are needed
to create this. If `instances` is 1, we can still safely skip the creation
of PDB because it's useless.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
The adminops client is already created in newBucketChecker(), use that
instance in checkObjectStoreHealth() than creating a new one.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
Currently `setObjectStorePort()` queries port from RGW service and
picks up the first port from the list, other places of the code
prefers for TLS, if it is enabled so for OBC's we end up having
`https` endpoint with non-secure port.
Fixes: #8141
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
When scaling down the nfs deployment gracefully, the wrong error code was checked,
resulting in a failed scaling down even though the condition was expected.
Now we check properly if the deployment was removed properly.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
when operator pod resources are set(which are
default in case of helm), operator pod are
killed due to using concurrency while creating
object store.
this commit checks if operator resources are set
or not. if set then we'll *not* create object store
in concurrency or if not set then we'll create in
concurrency.
Closes: https://github.com/rook/rook/issues/8149
Co-authored-by: Sébastien Han <seb@redhat.com>
Signed-off-by: subhamkrai <srai@redhat.com>
If the reconcile is cancelled due to a CR update, we want to retry the next
reconcile immediately rather than wait for the exponential backoff timeout
if the reconcile was already failing. The wait can easily be minutes
if the reconcile was in this state, which makes it appear the operator
is ignoring the request to start a new reconcile.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The PR disables mirroring on a pool when PoolSpec.Mirroring.Enabled
is set to false
- disable mirroring on the pool for `Mirroring.Mode == pool`
- Add warning for the user to disable mirroring manually for `Mirroring.Mode == image`
- Stop the mirroring health checker goroutine
- Reset the mirroring health check status in the CR.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Update the CSIDriver object to v1 from betav1 as it will be
deprecated in v1.19+ and become unavailable in v1.22+
Signed-off-by: Yug <yuggupta27@gmail.com>
The info log is rather verbose with all the filtering of the K8s version
like the following:
returning version v1.19.0 instead of v1.19.0+43983cd
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Similarly to block volume replication, Ceph is capable of replicating the
content of a Ceph Filesystem from one cluster to another.
For this, during the 1.6 cycle, we introduced a new CRD called
CephFilesystemMirror which effectively deploys a cephfs-mirror daemon.
However, configuring peers to enable replication between two clusters
had to be done manually.
Also various bug fix made it in Ceph eventually and the minimum required
version for this to work is to run on Ceph Pacific 16.2.5 at least.
So the automatic configuration of Ceph Filesystem peers is now possible.
By editing the CephFilesystem CRD, you can now turn on mirroring:
```yaml
mirroring:
enabled: false
# list of Kubernetes Secrets containing the peer token
# for more details see: https://docs.ceph.com/en/latest/dev/cephfs-mirroring/#bootstrap-peers
peers:
secretNames:
- secondary-cluster-peer
```
Also, the mirroring status is displayed in the CR status:
```
status:
info:
fsMirrorBootstrapPeerSecretName: fs-peer-token-myfs
mirroringStatus:
daemonsStatus:
- daemon_id: 4186
filesystems:
- filesystem_id: 2
name: myfs
lastChecked: "2021-07-01T14:16:29Z"
phase: Ready
snapshotScheduleStatus:
lastChecked: "2021-07-01T14:16:29Z"
snapshotSchedules:
- fs: myfs
path: /
rel_path: /
retention: {}
schedule: 24h
```
Closes: https://github.com/rook/rook/issues/7063
Signed-off-by: Sébastien Han <seb@redhat.com>
earlier, for mds, when resource limit is not defined it has
default limit of `"mds_cache_memory_limit": "4294967296"`
even if resouce.request is defined.
Now, resource request will be given preference when both
request and limit is defined and if only limit is defined
it will be applied or otherwise.
Closes: https://github.com/rook/rook/issues/8143
Signed-off-by: subhamkrai <srai@redhat.com>
update blockPoolChannel monitoringRunning field to `true` before
starting the goroutine to monitor mirroring
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Travis Nielsen
Sébastien Han
subhamkrai
Satoru Takeuchi
Jiffin Tony Thottan
Santosh Pillai
Yug