This commits removes controller-runtime dependencies
from the apis dir and to achieve that we are removing
webhook.
Signed-off-by: subhamkrai <srai@redhat.com>
if Multus is enabled the clusterinfo should be updated with
network as multus as to run the ceph cmds in remote
executor
Signed-off-by: parth-gr <paarora@redhat.com>
With octopus coming to end of life, we remove support from
Rook for deploying Ceph Octopus and assume a min version of
Pacific v16. Any checks for octopus or earlier are removed
from the reconciles since they are obsolete.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The CSI package needs to load clusterInfo, today this code is in the mon
package which makes the call of LoadClusterInfo impossible without
having a circular import.
Signed-off-by: Sébastien Han <seb@redhat.com>
adding observedGeneration field in the cephcluster cr
status for having better control on reconciling,
as observedGeneration field will be updated by the controller
Closes: https://github.com/rook/rook/issues/9673
Signed-off-by: parth-gr <paarora@redhat.com>
When downscaling CephNFS clusters, be sure to remove secrets and
configmaps. Also be sure to only downscale for the currently-reconciling
CephNFS cluster.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Prior to this, we were comparing a pointer (the memory address) with a
struct. This was obviously always failing and returned false. We must
dereference the pointer to access the data contained at that memory
location.
Closes: https://github.com/rook/rook/issues/9544
Signed-off-by: Sébastien Han <seb@redhat.com>
The built-in pools device_health_metrics and .nfs created by ceph
need to be configured for replicas, failure domain, etc.
To support this, we allow the pool to be created as a CR.
Since K8s does not support underscores in the resource names
the operator must translate this special pool name into
the name expected by ceph.
This also sets the basis for allowing filesystem data
pools to specify the desired pool name instead of requiring
a generated name.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Previously, if the pool was present we would not run the pool creation
again. This is a problem if the pool spec changes, the new settings will
never be applied.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit adds context parameter to k8sutil job functions. By this, we
can handle cancellation during API call of job resource.
Signed-off-by: Yuichiro Ueno <y1r.ueno@gmail.com>
Ths NFS spec now supports the CephBlockPool spec which means that it can
take advantage of all the known settings like compression, size, failure
domain etc.
Closes: https://github.com/rook/rook/issues/9034
Signed-off-by: Sébastien Han <seb@redhat.com>
The cluster CR can be forcefully deleted and cleanup the
cluster resources if the yes-really-destroy-data policy
is set on the CR. In this case, the other controllers should
treat the cluster CR as not existing and allow the finalizers
to be removed on those resources if they are requested for
deletion.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit adds context parameter to utilities in opcontroller to
remove context.TODO use in opcontroller. By this, we can handle
cancellation of reconcilers in a fine-grained way.
Signed-off-by: Yuichiro Ueno <y1r.ueno@gmail.com>
This commit updates the CephNFS CR to make the RADOS settings optional
for Ceph versions above 16.2.7 due to the NFS module changes in Ceph.
The changes in Ceph make it so the RADOS pool is always ".nfs" and the
RADOS namespace is always the name of the NFS cluster.
This commit also handles the changes in Ceph Pacific versions before 16.2.7
where the default pool name is "nfs-ganesha" instead of ".nfs".
Closes: https://github.com/rook/rook/issues/8450
Signed-off-by: Joseph Sawaya <jsawaya@redhat.com>
This commit is a large refactor on how the operator starts, stops and
how it starts various sub-components such as the ceph-csi driver. It
also refines the way we cancel orchestrations. We don't use breakpoints
anymore but send our self a SIGUP to reload our controller runtime
manager.
The reload will happen under different circonstances like:
* a new adminission controller secret is created/deleted/changed
* a CephCluster CR is edited
As mentioned earlier, the csi driver now has its own controller, just
like flex. It reacts to change in the operator config map for particular
ROOK_CSI_ fields.
A second new controller for the operator's general config has been
created, it manages:
* the logging level
* the ceph CLI command timeout
* the discovery daemon
The operator reacts much more rapidly to cancellation events by stopping
the manager's context and reloading it.
Signed-off-by: Sébastien Han <seb@redhat.com>
We have been having many issues with external mode with Ceph version
mismatching. The operator would have a Ceph version different than the
external cluster. The `radosgw-admin` was used to interact with S3
users, even a small version delta would cause the command to coredump.
After checking with the rgw core team it appears Rook was misusing the
CLI and the admin ops API should be used instead.
So this patch is the first introduction of go-ceph in Rook to consume
the rgw admin ops API instead of the `radosgw-admin` CLI, **only** for
user management in this initial commit.
Later we can do more such as bucket operation, zone management etc.
Closes: https://github.com/rook/rook/issues/7924
Signed-off-by: Sébastien Han <seb@redhat.com>
If the ceph cli outputs an error with "error calling conf_read_file"
this means that the operator has not written its ceph configuration
file. Thus ceph cli commands will fail, so we can just ignore that since
the operator will soon write this file in its initialization sequence.
Signed-off-by: Sébastien Han <seb@redhat.com>
We must add the finalizer right after the object creation otherwise the
seerver will later return an error on update that the object has been
modified. Indeed, it has been by the task that updates the status when
the object is first created.
Signed-off-by: Sébastien Han <seb@redhat.com>
The NFS reconciler was not updating NFS daemons that already existed.
The controller would fail to update daemons if the number of active
daemons did not increase or decrease.
Make sure existing NFS daemons are updated to new versions with all
scale up and scale down events.
Resolves#6611
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Found by running the following command:
codespell -S .git,*.png,*.jpg -L \
aks,keyserver,atleast,dne,ser,ist,files\',ba,dum,iam,te -f -H
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
this commit will enable one more linter ineffassign
in golangci-lint.
This linter throws an error when variable is assigned and never used.
`golangci-lint run --disable-all -E ineffassign` is used detects ineffassign
errors only.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ceph config and client packages are conceptually the same.
To avoid circular dependencies in some cases, we simplify by combining
the packages into the client package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We can now explicitly set any property on a given pool by using the new
Property field in the CephBlockPool Spec.
Also, this fixes the case where both `CephBlockPool` and `CephCluster`
are created at the same time. When Rook creates the pool, the cluster is
still being bootstrapped and the global option
`osd_pool_default_pg_autoscale_mode` has not bee set yet. So the pool
gets created but its `pg_autoscale_mode` property is set to `warn`
instead of `on`.
Closes: https://github.com/rook/rook/issues/5608V
Signed-off-by: Sébastien Han <seb@redhat.com>
This is the final conversion to controller-runtime conversion. This time the
CephCluster CRD has been converted to use the controller-runtime
library.
The controller incorporates all the previous watchers too, so the Node
and hot-plug configmap are been watched too.
Only the operator setting configmap is not being watcher since it's not
related to the CephCluster CRD.
Not only the patch converts to controller-runtime but also tries to
re-organize the tree of the repo to actually make the code more
readable and have better functions/methods/tests separations.
Closes: https://github.com/rook/rook/issues/4939
Signed-off-by: Sébastien Han <seb@redhat.com>
When updating the status on resources sometimes the update fails due to
the resource being an outdated version. This frequently occurs when
the same reconcile loop updates the status multiple times, or the finalizer
is added, or some other update to the resource. Upon the next reconcile
the error would generally go away since the status or finalizer didn't
need to be updated multiple times. But now the error is not expected
since the controller will retrieve the latest version of the resource
immediately before attempting to update it.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This type was a string already and was just making us doing string()
calls all the time to it's not worth it.
Signed-off-by: Sébastien Han <seb@redhat.com>
They are cases where we let the exponential backoff retry and some where
we force our own retry. Let's properly log this information.
Signed-off-by: Sébastien Han <seb@redhat.com>
The CRD watcher has been replaced by the new controller-runtime
framework.
This brings robustness in our operator, meaning that any resources that
are modified will be reconciled into the desired state.
Closes: https://github.com/rook/rook/issues/4941
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit is to handle all those unhandled errors which raises the gosec warning.
Fixed G104: Unhandled Errors are handled now
Signed-off-by: Nizamudeen <nia@redhat.com>
When the cluster is upgraded, the child controllers are notified with the
callback to the ParentClusterChanged() method. These should be made
in a separate goroutine so that the cluster controller is not blocked
on the child controllers and also so child controllers aren't blocked
on each other for the upgrade.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We now always perform ok-to-stop change when the deployment is going to
be updated. This could be for various reasons like change in the spec or
a new Ceph image.
In any case, if Ceph resources are going to be restarted this must be
done carefully.
Also trimmed the isUpgrade variable, the upcoming commit will remove the
need of that variable.
Keeping isUpgrade from the controller code since we need it to detect
whether an orchestration upgrade should be triggered or not (based on
the ceph cluster status).
Also, we keep it on the child controllers so we don't go into an
orchestration phase if the cluster image hasn't changed. The child does
not need to be updated/go into its orchestration phase because the
cluster CR changed.
Closes: https://github.com/rook/rook/issues/4379
Signed-off-by: Sébastien Han <seb@redhat.com>
The operator kit had more utility originally when the operator
was creating and managing the TPRs and CRDs directly. Since
the CRDs are now created from a manifest and no longer by the
operators, the utility of operator kit is limited to the
controller watcher. Since we are moving to the controller runtime
we simplify the code to make the transition smoother. Now
there is only a simple WatchCR method that will need to be
replaced as we maek that transition.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit adds status field for ceph related CRs which will be useful for knowing the ceph component status without checking the logs.
Signed-off-by: Ashish Ranjan <ashishranjan738@gmail.com>
When using the "errors" package, using `%+v` (extended format),
each Frame of the error's StackTrace will be printed in detail.
Let's only print `%v` to print the error.
If the error has a Cause it will be printed recursively.
Basically `%+v` has been replaced with `%v` for all `error` type
interfaces, whether the logger is Info, Warning or Error.
Signed-off-by: Sébastien Han <seb@redhat.com>
We recently discovered a race condition which happens not to update the
child CRDs when CR image changes.
The race happens under the following sequence:
* orchestration onAdd() is called when the operator image restarts
or its image updated
* the orchestration then goes into processing mon/mgr/osd
* during this the cluster CR is updated so onUpdate() is called,
however, onAdd() is not done yet for child CRDs (mds, rgw)
* onUpdate() runs against the cluster CR and updates the cluster images
* by the time the child CRDs reached onUpdate() from their respective
ParentClusterChanged() methods, the image is already up to date
so we were exiting since our check for updating
these resources are based on the cluster image version
To fix this, we changed the comparison, but using isUpgrade instead and
slightly changed the way isUpgrade operates. So now, isUpgrade is true
even if the Ceph version is identical which allows us to verify whether
or not the image changed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1775624
Signed-off-by: Sébastien Han <seb@redhat.com>
subhamkrai
travisn
parth-gr
Blaine Gardner
Joseph Lee
Josh Soref
Sébastien Han
Yuichiro Ueno
Joseph Sawaya
Arun Kumar Mohan
Mateusz Gozdek
subhamkrai
Madhu Rajanna
Nizamudeen
Ashish Ranjan