This adds an uninstall mode to the ceph cluster. If
allowUninstallWithVolumes in the CleanupPolicySpec is set to true then
the cluster deletion does not wait for the PVs to be deleted.
Co-authored-by: Nitin Goyal <nigoyal@redhat.com>
Signed-off-by: Raghavendra Talur <raghavendra.talur@gmail.com>
This allows users to specify additional labels to be added to the components
created by the Rook Ceph operator.
Additionally the rbd mirrors are now getting their annotations and
labels set.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
The operator will now allow the resource limits to be applied below the
recommended minimums. In small clusters, even the recommended minimums
may not be necessary. A warning is still printed to the operator log,
but we allow the configuration to continue.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The osd prepare jobs and osd daemons may have different placement
requirements. In particular, the topology spread constraints
or pod anti-affinity should only work on either the prepare job or
osd daemon, but does not work effectively on both types at the same
time. Therefore, we split out the osd prepare placement to be separate
from the osd daemon placement. If the osd prepare placement is not set
the operator will fall back to the osd daemon placement for
backward compatibility.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The helper to convert annotations to a string map is not needed in the
production code, so it is moved to the unit tests.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Applying annotations was crashing when there were no annotations in the
original map. Now the map is initialized when no annotations are set
in the original map.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We can now encrypted OSD device that were provisioned via a storage
class using the PV interface.
The encryption works at the storageClassDeviceSets level, which means we
can have encrypted and non-encrypted sets.
Using the new key `encrypted` we can turn it on.
Signed-off-by: Sébastien Han <seb@redhat.com>
this commit handles all the gosec g601
error code (i.e Implicit memory aliasing
of items from a range statement).
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
Instead of setting the Phase of the CR once the reconcile is done, let's
actually set in from the healthcheck so it is more accurate.
Closes: https://github.com/rook/rook/issues/5249
Signed-off-by: Sébastien Han <seb@redhat.com>
The admin needs to start the toolbox and run a command such as ceph osd tree to see the device classes for each OSD. This PR simplifies it by storing the deviceclass info in the CephCluster CR status
closes: https://github.com/rook/rook/issues/5754
Signed-off-by: kesavan <kvellalo@redhat.com>
- Add realm/zone group/zone to Object Context,
so that any call to runAdminCommand has the
same realm, zone group, and zone as the object
store that the call is going to.
- Also modify the delete code for the object-store
using multisite to remove the endpoints of an
object store from a zone instead of the normal
clean-up
- Added more debug logging all around the object-store
code related to multisite
- files generated by rerun of `make codegen`
- change back the edit on the Copyright in object.go
Signed-off-by: Ali Maredia <amaredia@redhat.com>
When zones are created the ceph RGWs inside the
those zones should be using pools with the zones
name not the object-store's name
Signed-off-by: Ali Maredia <amaredia@redhat.com>
This commit:
- adds the pull section on the CephObjectRealm spec
to enables realms to be pulled instead of created.
- creates the system user and generates the access
key and secret key for the user and zones in a realm.
- adds "omitempty" to fields in multisite CRs that
are not required
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Now, we can not only cleanup monitor data, logs and crashes but the
disks too. As part of the cleanupPolicy CR spec, we have a new setting
called sanitizeDisk which holds more details:
* method: indicates if the entire disk should be sanitized or simply ceph's metadata.
Possible choices are 'complete' or 'quick' (default)
* dataSource: indicate where to get random bytes from to write on the disk.
Possible choices are 'zero' (default) or 'random'
Using random sources will consume entropy from the system and will take much more time then the zero source
* iteration: overwrite N times instead of the default (1). Takes an integer value
See the documentation for more details.
Signed-off-by: Sébastien Han <seb@redhat.com>
We can now connect an external prometheus exporter to Rook to collect
metrics and generate alerts from Prometheus.
Just enable this in the CephCluster CR:
```
spec:
external:
enable: true
monitoring:
enabled: true
rulesNamespace: rook-ceph
externalMgrEndpoints:
- ip: 192.168.39.182
```
Closes: https://github.com/rook/rook/issues/5516
Signed-off-by: Sébastien Han <seb@redhat.com>
adding method to generate secret name in
cephobjectstoreuser status field in order
to programmatically retrieve the secret name
generated by the cephobjectstoreuser crd.
Also added unit test for the method.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
Add the ability to provision Ceph OSDs with Drive Groups.
This adds Drive Groups to the CephCluster CRD, and it sets code
in place for propagating this config to the OSD provisioning pod.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
moves the admission-controller server to use controller-runtime library for better support, maintainibility of code.
Signed-off-by: Vineet Badrinath <vbadrina@redhat.com>
This commit allows us to configure status check for each daemon:
* "mon": health check on the ceph monitors (quorum)
* "osd": health check on the ceph osds
* "status": ceph health status check
Each check is controlled by the following settings:
* disabled: whether to disable the check (default: false)
* internal: interval to run the check
* timeout: only valid for mons, is the timeout for unresponsive mon
before failling over.
Example to disable the status health check:
```yaml
healthCheck:
daemonHealth:
status:
disabled: true
```
As part of that, pod's livenessprobe can now be configured via the
following settings:
* disabled: whether to enable or not
* probe: override the current probe in place by a new one
```yaml
healthCheck:
livenessProbe:
mon:
disabled: true
```
Closes: https://github.com/rook/rook/issues/5772
Signed-off-by: Sébastien Han <seb@redhat.com>
For the CephObjectStore, the Status field of the CR has a new property
called "info", which contains a couple of information about the CR.
The first new addition is the endpoint of the object store.
Signed-off-by: Sébastien Han <seb@redhat.com>
Update the base operator image and cluster examples to use the latest
octopus release v15.2.4. Also cleanup some old examples and unit tests
that were still based on mimic.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We have introduced a new goroutine to check the state of the rgw
endpoint. It will run every minute and perform operations on a bucket.
The success or failure will be reported as part of the status field of
the CephObjectStore CR.
A good status will look like:
status:
endpointStatus:
lastChanged: "2020-06-25T13:47:45Z"
lastChecked: "2020-06-25T13:48:46Z"
phase: Connected
A failed status:
status:
endpointStatus:
details: |-
error creating bucket "rook-ceph-internal-s3-bucket-checker": RequestError: send request failed
caused by: Put http://rook-ceph-rgw-my-store.rook-ceph:8080/rook-ceph-internal-s3-bucket-checker: dial tcp 10.108.189.148:8080: connect: connection refused
health: ERROR
This check works for both converged and external modes. Note that the
CephObjectStore CRD has a new field called "externalRgwEndpoints" which
allows you to define a list of IP addresses pointing to rgws.
Closes: https://github.com/rook/rook/issues/5692
Signed-off-by: Sébastien Han <seb@redhat.com>
We can now explicitly set any property on a given pool by using the new
Property field in the CephBlockPool Spec.
Also, this fixes the case where both `CephBlockPool` and `CephCluster`
are created at the same time. When Rook creates the pool, the cluster is
still being bootstrapped and the global option
`osd_pool_default_pg_autoscale_mode` has not bee set yet. So the pool
gets created but its `pg_autoscale_mode` property is set to `warn`
instead of `on`.
Closes: https://github.com/rook/rook/issues/5608V
Signed-off-by: Sébastien Han <seb@redhat.com>
The volume sources for an OSD on PVC were relying on the ordering
of the volume sources slice. While this was working, it was causing
headaches and potential future developer error when being
interpreted incorrectly. The addition of the wal pvc device
would make the issue even more pronounced. Now each PVC used
for the OSD will be identified in a map by name such as data
and metadata.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
subhamkrai
Raghavendra TalurandNitin Goyal
Travis Nielsen
Alexander Trost
Sébastien Han
Umanga Chapagain
kesavan
Ali Maredia
Hiroshi Muraoka
Blaine Gardner
Vineet Badrinath
Ahmad Nurus S
UMEZAWA Takeshi