The integration tests have long been painful to maintain with
settings in various places and copied to multiple types,
inconsistent variable names, and otherwise difficult to maintain
code. Now the settings for a test suite are all in one place and
they remain in the same settings type throughout the test.
The multi-cluster suite is also refactored to use the same install
and uninstall helpers as the other suites.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
It's better to validate ownerReferences when setting them. In addition, we should use
controllerrutil.Set{Controller,Owner}Reference, that have such validation, as possible.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Finally! We can now stop editing manually our crds definition. Simply
run `make crds-gen`. These two files:
* `cluster/examples/kubernetes/ceph/crds.yaml`
* `cluster/charts/rook-ceph/templates/resources.yaml`
will be autogenerated for us.
We rely on the controller-gen tool, it reads our API definitions from
`pkg/apis/` and produces the CRD files accordingly.
It uses "markers" to add extra yaml fields to the CRD, for instance we
have a lot fields with:
```
nullable: true
x-kubernetes-preserve-unknown-fields: true
```
The corresponding API type markers are:
```
// +kubebuilder:pruning:PreserveUnknownFields
// +nullable
```
For more API convention see
https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#optional-vs-required
and for the markers see: https://book.kubebuilder.io/reference/markers/crd-validation.html
Signed-off-by: Sébastien Han <seb@redhat.com>
This is a follow up to:
https://github.com/rook/rook/pull/7264
which added pool quotas. It was stated that it would be nice to
be able to set pool max_bytes quotas using standard k8s quantity
formats rather than an integer representing the number of bytes.
I was too busy at the time to make the changes. This PR adds the
functionality.
Signed-off-by: Frank Ritchie <12985912+fritchie@users.noreply.github.com>
In Pacific the simple command to retrieve the active mgr is with
ceph mgr stat instead of retrieving the full ceph mgr dump.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The mgr daemon may be failed over by ceph if the active mgr is not
responding and the standby mgr is available. If the active mgr changes
the services for the dashboard and metrics will be updated with a
label selector for the new active mgr. The services cannot direct
traffic to the standby mgr or else they will be incorrectly redirected
to the active mgr.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The active mgr should match the labels on the services that
are available for prometheus and the dashboard. The selector
labels must be updated whenever there is a new active mgr.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When c-v runs after the end of the prepare sequence, it will look for
lvm and raw-based OSDs. The raw mode detects LVM OSDs so we must trim
the list of OSD, only to report the LVM ones if their ID exists.
Closes: https://github.com/rook/rook/issues/7359
Signed-off-by: Sébastien Han <seb@redhat.com>
For simple OSD scenario that don't require the following:
* an encrypted osd
* an osd with a backing device
* multiple osd on the same block device
The OSD will be prepared using the ceph-volume raw mode which does
not use LVM on non-pvc case.
Closes: https://github.com/rook/rook/issues/4768
Signed-off-by: Sébastien Han <seb@redhat.com>
block if not defined was used with osdInfo.Device so not empty anymore
in the loop, which means it will have the same value for all OSDs in the
loop.
This is only called when running on PVC, where a single device is
present so the loop has a single iteration, so not a big issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
The upcoming Rook release 1.6 will support Ceph Pacific which introduces
stable support for multiple Ceph Filesystems in the same cluster. So we
now allow the creation of multiple Filesystem if the release is Pacific.
Also, we remove the Operator config flag which was not necessary.
Here I have 2 filesystems:
```
[root@rook-ceph-tools-6b4889fdfd-vncck /]# ceph fs ls
name: myfs, metadata pool: myfs-metadata, data pools: [myfs-data0 ]
name: myfs2, metadata pool: myfs2-metadata, data pools: [myfs2-data0 ]
```
```
cluster:
id: cc747950-589a-4862-bad2-ff7de1217b1a
health: HEALTH_WARN
mons a,b,c are low on available space
6 pool(s) have no replicas configured
services:
mon: 3 daemons, quorum a,b,c (age 2d)
mgr: a(active, since 2d)
mds: myfs:1 myfs2:1 {myfs2:0=myfs2-b=up:active,myfs:0=myfs-b=up:active} 2 up:standby-replay
osd: 3 osds: 3 up (since 2m), 3 in (since 6d)
data:
pools: 6 pools, 717 pgs
objects: 44 objects, 4.2 KiB
usage: 46 MiB used, 90 GiB / 90 GiB avail
pgs: 717 active+clean
io:
client: 1.8 KiB/s rd, 4 op/s rd, 0 op/s wr
progress:
Global Recovery Event (45s)
[===========================.]
```
Signed-off-by: Sébastien Han <seb@redhat.com>
The vault env variable VAULT_BACKEND is read by the secret library so we
must not change it. This is reverting
ee6a03dfb8 with a few extra fixes for the
rgw code.
Signed-off-by: Sébastien Han <seb@redhat.com>
Remove features and design that supports adding OSDs to Ceph clusters
via `spec:driveGroups`. Update the Ceph upgrade doc that informs users
who currently use Drive Groups (we believe there are none of these
users) how to migrate to using the `spec:storage` config.
Resolves https://github.com/rook/rook/issues/7275
Revert "ceph: fix drive group deployment failure"
This reverts commit 76f1d9944e.
Revert "ceph: osd: add drive groups spec to cluster CR"
This reverts commit 7117fc12b7.
Revert "design: ceph orchestrator module add/remove OSDs"
This reverts commit 178187d035.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The osd prepare job detects the failure domain for the OSD by querying
the node topology labels. This topology is then assigned to the OSD
daemon in the CRUSH map. Previously, the affinity was required to be
set in the cluster CR, but it was very difficult to get right. Now the
operator will enforce the correct topology label on the OSD daemon
nodeAffinity by setting the label of the lowest topology in the hierarcy.
For example, if there are region, zone, and rack labels, the rack label
would be used to set the node affinity for the OSD daemon. If an
OSD prepare job is run in rack1, the corresponding OSD daemon will
have node affinity to rack1 to ensure the same topology. Previously,
the OSD could have ended up in rack2 unless the storageClassDeviceSet
placement was very carefully crafted.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
If the cluster was expanded we would iterate over the entire list of
OSDs again, create a new key and override in Vault... The Secret store
is not impacted since we have a handler for "already exist".
Signed-off-by: Sébastien Han <seb@redhat.com>
Add a new OSD provisioner status (reported by provisioner configmap)
that denotes that an OSD is preexisting and that OSD prepare does not
need to be run for the OSD. This only applies to OSDs on PVC currently
where existence of a deployment for the OSD indicates no further
provisioning needs to occur. New status is "preexisting".
Allow creating new OSDs on PVCs before updating existing ones by
allowing deferring OSDs during processing of OSD provisioning status
ConfigMaps. Deferral is identified by new "preexisting" status.
Add a unit test to ensure OSD on PVC provisioning occurs as expected
including deferring already-created OSDs to be updated after new PVCs
are created.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
With 5f57b6fd3a, we introduced a
regression in the validation code.
If the OSD PV comes from another cluster, GetCephVolumeRawOSDs must
return an error.
The prepare job will crash loop but at least with a useful and
comprehensive message.
Signed-off-by: Sébastien Han <seb@redhat.com>
If the ceph cli outputs an error with "error calling conf_read_file"
this means that the operator has not written its ceph configuration
file. Thus ceph cli commands will fail, so we can just ignore that since
the operator will soon write this file in its initialization sequence.
Signed-off-by: Sébastien Han <seb@redhat.com>
When creating object store, `radosgw-admin realm get ..` command is stuck forever when required number of OSDs are not available. Because of this the uninstall of object store is also stuck. User has to manually remove the finalizer to delete the object store.This PR uses `ExecuteCommandWithTimeout` for running `radosgw-admin` command. Timeout during installation will be reconciled. Cleanup will be treated as best effort. Any errors during uninstalling of single site object store will only be logged.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
With Ceph Pacific, Rook can now deploy the cephfs-mirror daemon.
This initial commit covers the deployment of a single daemon only.
Multiple mirror daemons is currently untested.
Only a single mirror daemon is recommended.
The configuration of peers will come in a later PR since the mgr module
is still pending upstream: https://github.com/ceph/ceph/pull/39050
The same goes for integration tests, they will get added later once we
start testing on Pacific.
Closes: https://github.com/rook/rook/issues/7002
Signed-off-by: Sébastien Han <seb@redhat.com>
added waitTimeoutForHealthyOSD in the cluster crd that defines the time (in minutes) the operator would wait before an OSD can be stopped for
upgrade. This PR also removes the ok-to-continue logic for osds as its already handled by ok-to-stop. The default value is 10 minutes.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The first patch to configure vault for ceph object store. If the `security.kms` configured in
`clusterSpec` CRD, RGW will be configured with vault kms settings to handle SSE request from s3 clients.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
As of Pacific the balancer is now on by default in upmap mode.
In earlier versions, the balancer was included in the `always_on_modules` list, but needed to be
turned on explicitly using the ``ceph balancer on command.
Signed-off-by: Sébastien Han <seb@redhat.com>
14.2.15 lvm batch command prepare report changes
output format. This commit skips md check if ceph version
is greater than 14.2.13.
Signed-off-by: shenjiatong <yshxxsjt715@gmail.com>
This reverts commit a6ee5657ae.
The operator reconcile of the cephcluster was staying in an endless
loop in clusters that did not have OSDs configured on all nodes.
Now we revert this change for the patch release and will follow
up with a more complete fix in https://github.com/rook/rook/pull/6813.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Test the code-flow when creating crush-rule via explicit
decompile/compile crushmap, when building two-steps crush rule. Relevant
for the case where 'PoolSpec.Replicated.ReplicasPerFailureDomain' is non
zeoro.
This test requires ceph's 'crushtool' to be installed on local machine.
Otherwise, it is ignored.
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
When 'pool.Replicated.ReplicasPerFailureDomain' is non zero, the code
goes via route of adding explicit crush-rule from template, but ignores
the 'pool.DeviceClass' if it is set. Added option to template to have
(optional) 'class hdd|ssd'
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
The deviceClass property was being ignored when creating the
non-pvc OSDs. Now the deviceClass will be specified as a property
for individual devices, all devices on a node, or all OSDs in the
cluster, depending on the level where the config is applied in the
cluster CR.
Co-authored-by: shenjiatong <yshxxsjt715@gmail.com>
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The arbiter can only be configured with the stretch cluster if the
CRUSH map is balanced and there are two zones in the CRUSH map.
After the OSDs are configured, we wait for all the OSD pods to be
running and that the CRUSH map is balanced. If it takes more than
two minutes, we fail the reconcile and try again. This is only done
the first time the stretch cluster is configured. In future reconciles
we first check if the stretch cluster is already enabled before
enabling it again.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Travis Nielsen
Frank Ritchie
Satoru Takeuchi
Sébastien Han
Blaine Gardner
crombus
Santosh Pillai
Jiffin Tony Thottan
shenjiatong
Shachar Sharon