A directory is created under dataDirHostPath for each OSD. In host-based cluster,
its name is constructed from kernel device name like _dev_sdb though user specifies
udev persistent device name. We should use unique name among all OSDs.
Closes: https://github.com/rook/rook/issues/7878
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
there was confusion regarding crash collector pods
in pending state which was basically due to secret
`rook-ceph-crash-collector-keyring` was not created
till mons are in quorum. this commit creates crash
collector pods after secret `rook-ceph-crash-collector-keyring`
is created.
Signed-off-by: subhamkrai <srai@redhat.com>
This commit removes redundant `RBDProvisionerSTSTemplatePath` and
`CephFSProvisionerSTSTemplatePath` variables which were forgetten to
be removed in https://github.com/rook/rook/pull/5982 when csi support
for k8s 1.13 was removed.
Signed-off-by: Rakshith R <rar@redhat.com>
We don't need to set log_file to empty string since "log_to_file" is set
to False. This is probably an old leftover/hack we were doing in the
past when "log_to_file" and other related options were not there.
Because of this line
https://github.com/ceph/ceph/blob/master/src/perfglue/heap_profiler.cc#L99,
Ceph looks for the log_file conf option. In our case it was empty, so
the logging would default to the current directory which points to the
container runtime root when not set and we don't have permission to
write there.
We now force it to Ceph's default so that existing cluster will get the
fix after upgrading.
Just removing the option allows us to get dump in /var/log/ceph.
Phew, what a bug!
Signed-off-by: Sébastien Han <seb@redhat.com>
This PR has following changes around OSD pdbs
- Detect node drains more reliably. When OSD is down and OSD pod is not scheduled to any node or if the scheduled node is not ready, then assume that node is draining.
- Don't set no-out flag on the failure domain if the OSD is down due to reasons other than node drain (say disk failure)
- update unit tests
- update design doc to reflect above changes
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
A user with unbalanced system (e.g., some OSDs use a partition which
resides on a device along-side OS partition) may want to have a
fine-grained control on the overall load of specific OSD. While osd
weight affects write-load, primary-affinity affects read-load.
This patch allow user to define osd's primary-affinity (similar to
'DeviceClass' and 'InitialWeight'), which is sent to the osd (via mon)
as part of deployment sequence, using 'ceph osd primary-affinity' command.
Valid values are within the range [0.0, 1.0). If not set, default value
is 1.
ROOK issue: https://github.com/rook/rook/issues/7773
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
Events like node drain can take more than 10-15 minutes. If the node is not update the default monTimeOut of 10 minutes, then rook will attempt to fail over the mon. This failover won't work as the node is still down.
This PR retries once before the mon failover if the mon pod is not scheduled
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
This commit updates external-snapshotter version to
v4.0.0 which supports snapshots v1.
Rook now defaults to enabling RBD and CephFS snapshotter
for K8s >= v1.17 and disabling it for K8s <= v1.16.
Supporting changes in documents and examples yaml files
are made.
Signed-off-by: Rakshith R <rar@redhat.com>
The VolumeSource type was only used internally when loading
the storageClassDeviceSets. The volumeSource element is never
expected to be specified in the CephCluster CR, so it is now
removed from the schema. The VolumeSource type is renamed to
deviceSet for clarity.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Because of the recent CRD changes made, the mon count had a minimum of
1, making the configuration of the external cluster impossible. The
operator would fail to add the finalizer:
```
2021-04-29 16:57:38.429451 E | ceph-cluster-controller: failed to reconcile. failed to add finalizer: failed to add finalizer "cephcluster.ceph.rook.io" on "test-external": CephCluster.ceph.rook.io "test-external" is invalid: spec.mon.count: Invalid value: 0: spec.mon.count in body should be greater than or equal to 1
```
We now fixed the CRD as well as adding the CR status.
Signed-off-by: Sébastien Han <seb@redhat.com>
when store.Status was not initialized it caused
crashes when assigning store.Status.Info["endpoint"]
to objContext.Endpoint.
This commits makes sure store.Status is not Nil
before setting objContext.Endpoint and
objContext.SecureEndpoint in the ObjectStoreUser
controller.
Closes: https://github.com/rook/rook/issues/6916
Signed-off-by: Ali Maredia <amaredia@redhat.com>
set fsPreparedForUpgrade to true for upgrading mds, to
make sure that max_mds is set back to active count
after all mds agent gets upgraded
Signed-off-by: shenjiatong <yshxxsjt715@gmail.com>
When DEBUG logging is enabled in the operator, there are a number of overwhelming messages in the log that are very overwhelming and don't seem useful, which makes debug mode difficult to use
Updated and Cutted down the messages that are not useful in debug mode
Closes: https://github.com/rook/rook/issues/7499
Signed-off-by: parth-gr <paarora@redhat.com>
Add `SecuritySpec` to specify kms details for rgw in `ObjectStoreSpec` than using existing
`SecuritySpec` used for `ClusterSpec`. The vault secret engines conflict with OSD and RGW
kms encrytpion
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
The ValidateConnectionDetails() contains `clusterSpec` assuming `SecuritySpec` only
part to `cephCluster` CRD. But we may need to validate same for `SecuritySpec` in
`cephObjectStore` CRD. Hence modifying the signature of the api.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
OBC operations will fail if RGW only enabled HTTPS. With this change, OBC operations
will use needed TLS certs to succeed the operation.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
Rook operator sends S3 to RGW server for bucket operations performed by healthchecker,
bucketprovisioner etc. Add api to fetch cacert if the TLS enabled for RGW.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
The ceph upgrade blocks if the ceph heatlh is HEALTH_ERR. If the user
wants to force the upgrade despite the health error, they will need
to set skipUpgradeChecks: true in the cephcluster CR. This message
will hopefully make that setting more discoverable.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The nodeAffinity for portable OSDs is needed to ensure the OSDs are
tied to the same zone or other failure domain where the OSD was
prepared and where it is expected to run. During upgrade the topology
affinity was not being detected since the osd prepare job is skipped
in that case. Now the topology will be detected from the running
OSD daemon pod's node.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Service serving certificates are intended to applications that require
encryption in openshift. These certificates are issued as TLS web server
certificates. Currently RGW supports TLS authentication with help of
certs passed as secrets, in this case we add following details as
`service.annotations` in the Objectstore Gateway Spec :
```
service:
annotations:
service.beta.openshift.io/serving-cert-secret-name: <name for
autogenerated secret>
```
More details about service serving cert can be found at :
https://docs.openshift.com/container-platform/4.6/security/certificates/service-serving-certificate.html
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
delete updatePVCIfChanged method on "Cluster" from osd package and use
the common one ExpandPVCIfRequired from k8sutil pkg
Signed-off-by: Nitin Goyal <nigoyal@redhat.com>
When the node get added to the cluster the operator always watches for node events and starts a reconcile when a node is ready.
Checking the Node if they already have OSDs present and stopping them from reconcile.
Closes: https://github.com/rook/rook/issues/7534
Signed-off-by: parth-gr <paarora@redhat.com>
OSDs not automatically started when adding nodes to existing cluster.
Call the helper NormalizeCrushName(name) to make sure the node name can match the name in the crush map before querying for the node in the crush map, and reconcile when new nodes get added.
Closes: https://github.com/rook/rook/issues/7462
Signed-off-by: parth-gr <partharora1010@gmail.com>
As we have cephcsi v3.3.1 release
with couple of bug fixes and a CVE fix
updating the cephcsi to latest release.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Ceph support the option '--osd-crush-initial-weight' upon OSD start,
which sets an explicit weight (in TiB units) to specific OSD. Allow
passing this option all the way from the user (similar to
'DeviceClass'), for the special case where end users wants it cluster
to have non-even balance over specific OSDs (e.g., one of the OSDs is
placed over a partition alongside OS-partition).
ROOK issue: https://github.com/rook/rook/issues/7448
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
After the peer is imported via a token, ceph internally stores the
information of the remote cluster. So the rbd-mirror daemon does not
need to have files (key and config) for the remote site.
This means lighter code for us, as well no more restarts for the
rbd-mirror daemon once a peer is added to the configuration.
Signed-off-by: Sébastien Han <seb@redhat.com>
In case ssl enabled for RGW, bucket healthcheck won't work since access is denied from the server.
In that case configure S3 agent using "InsecureSkipVerify: true" option.
Fixes: 7288
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
As host networking is no longer necessary for CSI driver,
it will be disabled by default.
An option CSI_ENABLE_HOST_NETWORK is added to rook-ceph-operator-config
configmap and enableCSIHostNetwork in helm chart values.yaml to
enable/disable host network in CSI plugin pods.
Closes: #7203
Signed-off-by: Rakshith R <rar@redhat.com>
We now always set the config flags on reconcile. Previously we were
looking for non-existing rgw or mds which means that on upgrade we would
never set those flags. However, we want to set those flags on "old"
cluster that got upgraded.
Signed-off-by: Sébastien Han <seb@redhat.com>
Satoru Takeuchi
Sébastien Han
Travis Nielsen
subhamkrai
Rakshith R
Santosh Pillai
Shachar Sharon
shenjiatong
Ali Maredia
Blaine Gardner
parth-gr
Jiffin Tony Thottan
Nitin Goyal
parth-gr
Madhu Rajanna
Lars Lehtonen