The exporter is enabled by default, but the service monitor
can only be enabled if prometheus CRDs are available. The
monitoring.enabled must be set to true as the flag that
prometheus is available and the service monitor should
be created.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 1b80767877)
Shorten the termination time for exporter pod before it
gets deleted to avoid crashing of pod.
Signed-off-by: avanthakkar <avanjohn@gmail.com>
(cherry picked from commit 8a8eb863d0)
The prometheus mgr module and ceph exporter can now be optionally
disabled by the monitoring.metricsDisabled setting in the
CephCluster CR. These will not be disabled by default, rather
than the mgr module being disabled by default from v1.11.4.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 92a0ab37e3)
The active and standby labels are updated on the mgr pods
by the mgr sidecar. In the case of a single mgr, there is
not sidecar, so the dashboard and other mgr services were
not available when there was a single mgr. Now the mgr
pod will default to the active mgr status label so that
the single mgr case will succeed. In the case of two mgrs,
the sidecar will immediately update the standby mgr to
remove the active status label.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 1fa3c5ae18)
As we are not using the controller runtime
metrics we dont even need to start the server
as its just uses extra resouces and its not
much useful.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 6f30700f5e)
if the configuration is already set in the ceph
database, using `ceph config assimilate-conf`
will add the key and value if its missing but
it wont update the value if the key is already
present, To fix this problem we can remove the
key and add all the configurations once again.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 1139cefc94)
Pare down the available volume sources for NFS config files so that the
CRD isn't unnecessarily huge. This allows us to recommend
`kubectl apply` again in the upgrade doc.
Size of the NFS CRD is reduced by approximately 60%.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
(cherry picked from commit 6500c11d57)
Dashboard ac-user-create cmd was taking more time
then the usual ceph command to run,
So increased the timeout to run the cmd, and
now dashboard admin user is sucessfully created
Closes: https://github.com/rook/rook/issues/12113
Signed-off-by: parth-gr <paarora@redhat.com>
(cherry picked from commit ed61d25fc3)
When using sssd, the /etc/nsswitch.conf should also include local files
for lookups. This is required when looking up uid 0 and the root user
which are not handled by ldap or other sources.
Closes: https://github.com/rook/rook/issues/11925
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
(cherry picked from commit d3636aaf3e)
Adding the search domain localhost causes lookup failures.
Many DNS servers have a wildcard entry *.localhost which returns
127.0.0.1. Adding a "search localhost" to resolv.conf appends a
".localhost" for every host lookup for which the DNS server returns
127.0.0.1 which causes failures further down the execution path.
example: with localhost in the search domains
# ping google.com
PING google.com.localhost (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.071 ms
Closes: https://github.com/rook/rook/issues/11870
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
(cherry picked from commit 08d83a33cd)
The expected ceph version for exporter is changed temporarily because
some regression was detected in Ceph version 17.2.6.
Thus, disabling ceph-exporter for now until all the regression are fixed.
Signed-off-by: avanthakkar <avanjohn@gmail.com>
(cherry picked from commit 3e46522423)
With the release of ceph v17.2.6, the examples and the base
image for the operator are updated to pick up the latest
and greatest.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 609ac91cb1)
use ClusterID of the k8s cluster while doing nslookup of the
exported mon or osd service IP
Signed-off-by: sp98 <sapillai@redhat.com>
(cherry picked from commit 9e8e85d68b)
if port was used by other daemon，the dashboard will start failed and the status of the ceph will be err，then we update the port to a unused port，the operator can not deal with it
Signed-off-by: zc <zc@zcdeMacBook-Pro.local>
(cherry picked from commit caf7b8c753)
obc-label-controller needs to check only obc provisioned by Rook operator.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
(cherry picked from commit 01a3dd0baf)
The msgr2 conversion assumed the endpoints were formatted
with a single :, which is not compatible with ipv6.
Now if the endpoint ends with the v1 port, it will
simply update the prefix to v2.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit bbfba5425f)
PR #3143 added check to retain 6790 port for mons. Now
we can remove this check in Rook 1.11.
Signed-off-by: sp98 <sapillai@redhat.com>
(cherry picked from commit 755135582f)
adding a option to make AttachRequired field
as configurable and added a comment to explain
the consequences of changing the default value
resolves: #11805
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 4c710de791)
we dont need to have fstype for cephfs
pvc, removing the unwanted argument
for cephfs.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 3017d563f2)
Remove the `ceph-conf-dir` volume and volume mount from exporter
as it's no more required to spin up exporter daemon
Signed-off-by: avanthakkar <avanjohn@gmail.com>
(cherry picked from commit 1a000673a4)
The defaults in CRDs cause an update and trigger a new
reconcile if the value is not set. For the key rotation
setting, the default was only being updated when the kms
feature was enabled. This update was causing the reconcile
to fail in the kms tests. With the default now in code,
the default can remain empty and no cr update will trigger
a new reconcile unexpectedly.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit cd94ed7ddc)
The rgw dashboard can be disabled by the setting in the
CephObjectStore `gateway.dashboardEnabled` if set to false.
Signed-off-by: xiaobaowen <xiaobaowen@deeproute.ai>
(cherry picked from commit 253d4123f6)
Add a hostNetwork option for a Ganesha server.
This allows you to use host networking for the cluster but still
use regular pod networking for NFS Ganesha servers
Signed-off-by: Richard Bateman <taxilian@gmail.com>
(cherry picked from commit 0ca9da23e8)
When msgr2 is required, ensure the mon endpoints passed to
the csi configmap are on port 3300. The mons will be
listening on both 6789 and 3300. Existing volumes can
continue using port 6789 while new volumes will use
port 3300.
Signed-off-by: travisn <tnielsen@redhat.com>
(cherry picked from commit 0484a3973f)
This commit adds util function to create key rotation cron job
such as getKeyRotationContainer, getKeyRotationCronPodTemplateSpec
and makeKeyRotationCronJob.
Signed-off-by: Rakshith R <rar@redhat.com>
(cherry picked from commit ef38aea2a4)
This commit adds functionality to be able to rotate
key encryption key of encrypted PVC backed OSDs.
Necessary changes such as adding update functionality
to kms and rbac changes are made as well.
Signed-off-by: Rakshith R <rar@redhat.com>
(cherry picked from commit 71e011f731)
The exporter requires the mon config and keyring.
Use the CEPH_ARGS env var to specify the config
instead of expecting a ceph.conf to be generated
by another component on the host path.
Co-Authored-By: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: Avan Thakkar <athakkar@redhat.com>
(cherry picked from commit b6013d9b11)
Travis Nielsen
avanthakkar
Redouane Kachach
Madhu Rajanna
Blaine Gardner
parth-gr
sp98
Sachin Prabhu
zc
Shachar Sharon
Jiffin Tony Thottan
xiaobaowen
Thomas Way
root
Richard Bateman
Rakshith R