With DM_DISABLE_UDEV, LVM will avoid interaction with udev.
LVM will manage the relevant nodes in /dev directly.
Signed-off-by: Sébastien Han <seb@redhat.com>
A new controller to bootstrap ceph-crash pod on Ceph nodes running Ceph
pods only.
This implementation is unfortunately a mix of 'hacks' to make the daemon
working correclty. The ceph-crash script faced different issues:
* it's not a daemon
* it does not have any key in cephx
* it runs ceph commands under the hood which need an admin key and a
ceph.conf
On upstream Ceph, ceph-crash needs to grow better, once that happens we
will improve our implementation.
This also enhances osd provisionConfig struct with DataPathMap
Pod volumes and volume mount needs DataPathMap to perform the right
actions on log and crash dir. Exposing DataPathMap makes that possible.
Obviously, this is exposing ceph crash reports on the host as
well as pushing them into the mgr.
Basically, if a daemon fails, it'll put its core dump into
/var/lib/ceph/crash, bindmounting this dir on the host, ensures that the
crashes don't get lost when the pod dies.
Example:
```
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !] kubectl -n rook-ceph exec -ti rook-ceph-crashcollector-minikube-574858b99c-zvg4z bash
bash: warning: setlocale: LC_CTYPE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_COLLATE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_MESSAGES: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_TIME: cannot change locale (en_US.UTF-8): No such file or directory
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ceph crash ls
[root@rook-ceph-osd-2-7644f99695-cljzh /]# pidof ceph-osd
13258 5415 5397
[root@rook-ceph-osd-2-7644f99695-cljzh /]# kill -SIGABRT 13258
[root@rook-ceph-osd-2-7644f99695-cljzh /]# ls /var/lib/ceph/crash/
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96 posted
... wait maximum 10 min (ceph-crash scraps every 10 minutes)
... the container will exit
[root@rook-ceph-osd-2-7644f99695-cljzh /]# exit
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !]
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !] kubectl -n rook-ceph exec -ti rook-ceph-crashcollector-minikube-574858b99c-zvg4z bash
bash: warning: setlocale: LC_CTYPE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_COLLATE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_MESSAGES: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_TIME: cannot change locale (en_US.UTF-8): No such file or directory
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]#
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]#
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ceph crash ls
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96 osd.1
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ls /var/lib/ceph/crash/
posted
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ls /var/lib/ceph/crash/posted/
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# tail /var/lib/ceph/crash/posted/2019-11-12_12\:56\:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96/log
1/ 5 mgr
1/ 5 mgrc
1/ 5 dpdk
1/ 5 eventtrace
-2/-2 (syslog threshold)
-1/-1 (stderr threshold)
max_recent 10000
max_new 1000
log_file /var/lib/ceph/crash/2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96/log
--- end dump of recent events ---
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Rohan CJ <rohantmp@gmail.com>
The topology of the cluster should be based on the node labels rather
than a setting in the cluster CR. This allows a much richer and more
dynamic topology to be configured. The location will now be ignored
if specified in the cluster CR.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We removed the topologyAware CRD option since it was redundant with the
use of an OSD being backed by a PVC.
So now, if an OSD is backed by a PVC we assume the topology aware
decision and will discover zone and region labels on that host.
Signed-off-by: Sébastien Han <seb@redhat.com>
Some testing on OpenShift has shown that enabling Hostnetworking causes
issues with ceph-volume creating OSD.
This is a pure Red Hat OpenShift downstream issue.
This is meant to be temporary while we are waiting for the Selinux team
to get back to us.
Signed-off-by: Sébastien Han <seb@redhat.com>
Even legacy osds were still running with this flag. In my previous patch
I was trying to minimize the impact of the change and was afraid the
config file was holding important information but that appears not to be
true.
The only option in the config could have the keyring path, but it's
passed in the CLI startup line.
Closes: https://github.com/rook/rook/issues/4063
Signed-off-by: Sébastien Han <seb@redhat.com>
The osd-prepare jobs should not inherit osd resources since this might
cause scheduling issues.
Instead, we can now use the new CRD property `prepareosd` in the resource section.
Refer to the documentation for more details.
Closes: https://github.com/rook/rook/issues/2502
Signed-off-by: Sébastien Han <seb@redhat.com>
Following the Ceph OSD rework, my test environment regularly failed to
start OSDs, as they would start before the postStart lifecyle hook which
was chown'ing the log and data directories could finish. Pods failed to
start for an arbitrarily long time before starting successfully. This
was a manifestation of a race condition identified in Ceph monitors in
https://github.com/rook/rook/pull/3594#discussion_r312279176
Create a Ceph operator-level method to create an init container that
will chown the necessary directories for all Ceph daemons (any daemon
which runs as the ceph:ceph user-and-group). Also add this container to
expectations for Ceph pod templates in unit tests.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Just as with the mon, mgr, mds, rgw, and rbd-mirror daemons, do not
generate a ceph.conf in an init container for directory-based OSDs.
Instead use the mon config database and the commandline to supply all
the needed arguments for running these OSDs.
Also generate a keyring secret to mount to OSD pods. Use this
secret for directory-based OSDs for now with the intention to
use this for other OSDs in the future.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
As with the rest of the Ceph daemons, use the new config patters for
dir-based OSDs. Do not generate a config to use in an init container;
instead use CLI flags and the mon config database.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
This is just one small unit of work that still results in usable
dir-based OSDs. The goal is to build on this to run dir-based OSDs using
the new config patterns used by the other Ceph daemons. This also
removes an unnecessary mount of the dataDirHostPath in directory-based
OSD containers.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Update pkg/operator/ceph/cluster/osd/spec.go
Rook v1.1.2 uses a different command to start an OSD, and seems to
have problems when --osd-memory-target contains a number with a
decimal point.
Co-Authored-By: Sébastien Han <seb@redhat.com>
Signed-off-by: Erik Knudtson <eknudtson@discogsinc.com>
We don't need to force any Ceph config file for ceph-volume based OSDs
since the 'ceph-volume activate' command mount everything at start time
in the right place.
So now, OSD will keep running normally and they will also read back
normally the default location of the ceph configuration:
/etc/ceph/ceph.conf which will allow OSDs to read any configuration
overrides.
We cannot remove the generation of that file in /var/lib/rook/osd* since
we cannot tell at the stage that triggers the generation if we run
ceph-volume or not. So let's keep it around for some time.
If you are wondering how the OSD connects to the mons this is done via
the CEPH_ARGS env variable which was introduced in
https://github.com/rook/rook/pull/3894.
Closes: https://github.com/rook/rook/issues/3926
Signed-off-by: Sébastien Han <seb@redhat.com>
Previously the debug flag was turned on for the 'activate' call only,
now 'prepare' will also take advantage of it.
Signed-off-by: Sébastien Han <seb@redhat.com>
Encrypted OSDs are failing because ceph-volume is unable to determine
how to contact the monitors. Setting the CEPH_CONF env variable for OSD
pods fixes this issue. (#3846)
Signed-off-by: Michael Vollman <michael.b.vollman@gmail.com>
When running osds on pvc, the lvm is still holding the device when the cluster is deleted. As a result the PVs go into `failed` state
when the cluster is deleted. On deactivating the device, the 'failed' pvs get deleted as well. Solution involves:
- Running `lvchange -an <vg group name>` to deactivate the device.
- This command runs after 'osd prepare' completes.
- This command also runs after the 'osd daemon pod' is deleted or if the ceph-osd process terminates for some reasons.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
If a Ceph container image is specified which has a entrypoint then the
Init container for osd prepare job blkdevmapper will fail. So set the
Command property.
Signed-off-by: rohan47 <rohgupta@redhat.com>
OSD pods when running on PVC fail randomly due to some race condition:
- OSD daemon pod was activating the volume group using vgchange -an without any volume group name.
- This caused the pods to fail randomly when number of OSDs is more, say greater than 10.
- This fix adds Volume group name while activating/deactivating volume groups to fix this
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The init container for copying binaries was being overwritten by the
init container for initializing pvcs. This change appends the init
containers so all expected init containers are preserved.
Signed-off-by: travisn <tnielsen@redhat.com>
Add deviceClass as a per OSD config option under
storage/nodes/devices/config for setting a custom crush device class
per OSD.
Signed-off-by: Michael Vollman <michael.b.vollman@gmail.com>
Adding support for the db-devices flag for ceph versions 14.2.1 and
newer. This flag will allow for explictly setting the db device for
bluestore configurations to the device specified as metadataDevice.
Fixing the databaseSizeMB config parameter to ensure it is used to set
the size of the db-device partition when specified at either the global
or individual device level. (#3652)
Signed-off-by: Michael Vollman <michael.b.vollman@gmail.com>
Allow users to specify overrides in the CephCluster CRD. The override
ConfigMap still exists for emergency situations and is mounted into
daemon pods directly instead of being merged into a Rook-created config
file.
Rook Ceph no longer uses a config file for managing daemons with the
exception of the OSDs which still generate a config in an init
container.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
OSD prepare job pods don't require node selector when the OSDs are based
on PVC.
The bug was intruduced in https://github.com/rook/rook/pull/3707 which
added node selector to the prepare job pod when portable property of
storageClassDeviceSets is false.
Adding node selector set kubernetes.io/hostname=example-storagedeviceset-xxx, while there is no host example-storagedeviceset-xxx the prepare job failed.
Signed-off-by: rohan47 <rohgupta@redhat.com>
ceph: Use the new NetworkSpec api
ceph: Change all tests to use the NetworkSpec
ceph: Remove TypeMeta field from NetworkSpec
ceph: Change IsHost network func signature
Signed-off-by: giovanism <giovanism@outlook.co.id>
Fix variable scoping issue that is ignoring osdsPerDevice config
setting. Ensure that in all scenarios both the global and per OSD
osdsPerDevice setting are honored. When both are set the more specific
setting will be used. (#3599)
Signed-off-by: Michael Vollman <michael.b.vollman@gmail.com>
Previously, the value was set to commonArgs, resulting in dead code,
since common arg isn't used after the append.
Signed-off-by: Odin Ugedal <odin@ugedal.com>
This commit fixes resource limits and placements not getting applied to osd pods provisioned using storageClassDeviceSets
Signed-off-by: Ashish Ranjan <aranjan@redhat.com>
- Added code to support StorageClassDeviceSet spec provided in the cluster-on-pvc.yaml
- The code reads the StorageClassDeviceSet spec and creates pvc based on the ‘count’ field for each device set.
- OSD prepare job is started for each PVC which activates the ceph-volume on each PVC
- Finally OSD is started on each of the PVC device.
Co-authored-by: rohan47 <rohgupta@redhat.com>
Co-authored-by: Ashish Ranjan <aranjan@redhat.com>
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Replace usage of the custom osd copybins command with the new top-level
copy-binaries command introduced with cmd-reporter.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>