Some log messages indicate when the upgrade checks will be
performed. If the Ceph image hasn't changed, the upgrade checks
are skipped. The messages were confusing if running a Rook
upgrade.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
A new controller to bootstrap ceph-crash pod on Ceph nodes running Ceph
pods only.
This implementation is unfortunately a mix of 'hacks' to make the daemon
working correclty. The ceph-crash script faced different issues:
* it's not a daemon
* it does not have any key in cephx
* it runs ceph commands under the hood which need an admin key and a
ceph.conf
On upstream Ceph, ceph-crash needs to grow better, once that happens we
will improve our implementation.
This also enhances osd provisionConfig struct with DataPathMap
Pod volumes and volume mount needs DataPathMap to perform the right
actions on log and crash dir. Exposing DataPathMap makes that possible.
Obviously, this is exposing ceph crash reports on the host as
well as pushing them into the mgr.
Basically, if a daemon fails, it'll put its core dump into
/var/lib/ceph/crash, bindmounting this dir on the host, ensures that the
crashes don't get lost when the pod dies.
Example:
```
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !] kubectl -n rook-ceph exec -ti rook-ceph-crashcollector-minikube-574858b99c-zvg4z bash
bash: warning: setlocale: LC_CTYPE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_COLLATE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_MESSAGES: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_TIME: cannot change locale (en_US.UTF-8): No such file or directory
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ceph crash ls
[root@rook-ceph-osd-2-7644f99695-cljzh /]# pidof ceph-osd
13258 5415 5397
[root@rook-ceph-osd-2-7644f99695-cljzh /]# kill -SIGABRT 13258
[root@rook-ceph-osd-2-7644f99695-cljzh /]# ls /var/lib/ceph/crash/
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96 posted
... wait maximum 10 min (ceph-crash scraps every 10 minutes)
... the container will exit
[root@rook-ceph-osd-2-7644f99695-cljzh /]# exit
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !]
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !] kubectl -n rook-ceph exec -ti rook-ceph-crashcollector-minikube-574858b99c-zvg4z bash
bash: warning: setlocale: LC_CTYPE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_COLLATE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_MESSAGES: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_TIME: cannot change locale (en_US.UTF-8): No such file or directory
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]#
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]#
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ceph crash ls
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96 osd.1
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ls /var/lib/ceph/crash/
posted
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ls /var/lib/ceph/crash/posted/
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# tail /var/lib/ceph/crash/posted/2019-11-12_12\:56\:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96/log
1/ 5 mgr
1/ 5 mgrc
1/ 5 dpdk
1/ 5 eventtrace
-2/-2 (syslog threshold)
-1/-1 (stderr threshold)
max_recent 10000
max_new 1000
log_file /var/lib/ceph/crash/2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96/log
--- end dump of recent events ---
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Rohan CJ <rohantmp@gmail.com>
This change standardizes the ownerRefs of Ceph keyrings to
k8s Deployment resources across all daemons and refactors a
bit of duplicate code on keyring association for ease of
maintenance.
Fixes: #4089
Signed-off-by: egafford <egafford@redhat.com>
Following the Ceph OSD rework, my test environment regularly failed to
start OSDs, as they would start before the postStart lifecyle hook which
was chown'ing the log and data directories could finish. Pods failed to
start for an arbitrarily long time before starting successfully. This
was a manifestation of a race condition identified in Ceph monitors in
https://github.com/rook/rook/pull/3594#discussion_r312279176
Create a Ceph operator-level method to create an init container that
will chown the necessary directories for all Ceph daemons (any daemon
which runs as the ceph:ceph user-and-group). Also add this container to
expectations for Ceph pod templates in unit tests.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
On rare occasion, the ceph checks might not be 100% correct and the user
might decide to force an upgrade anyway.
Correctly, if we are in an upgrade, we perform `ok-to-stop` check for
each daemon, if one of them fails, we retry and eventually fail.
They are corner-cases where users would like to force the upgrade anyway.
Enhance the new CR property: "skipUpgradeChecks: true".
Closes: https://github.com/rook/rook/issues/3872
Signed-off-by: Sébastien Han <seb@redhat.com>
From now on, Rook will only perform check before upgrades when there is
an actual upgrade. So if the Ceph image changed and a new version is
desired Rook will go through all the daemons and update them one by one
and perform checks in between.
Closes: https://github.com/rook/rook/issues/3583
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph: Use the new NetworkSpec api
ceph: Change all tests to use the NetworkSpec
ceph: Remove TypeMeta field from NetworkSpec
ceph: Change IsHost network func signature
Signed-off-by: giovanism <giovanism@outlook.co.id>
Before each pod starts, the daemon changes the ownership of
/var/log/ceph which is bindmounted on a hostPath.
On OpenShift envionments, the container must be privileged in order to
successfully change the owernship.
Closes: https://github.com/rook/rook/issues/3485
Signed-off-by: Sébastien Han <seb@redhat.com>
At the beginning of every container startup we now change the ownership
of every known ceph directories to ceph:ceph.
This will allow daemons to start properly as well as allowing daemon to
writes their logs on files.
This is needed because ceph daemon now run as 'ceph' instead of 'root'
Signed-off-by: Sébastien Han <seb@redhat.com>
We do not determine the daemon type and name by string parsing anymore
but passing that info directly in the update call, it's more reliable.
Also removing a bunch of unused functions.
Signed-off-by: Sébastien Han <seb@redhat.com>
Do not consider clusterInfo Ceph version since it's the one picked by
the spec image.
The CephVersion provided here needs to be the current running version
of Ceph for when it is later passed to OkToStop and checked with
IsAtLeast. If you are upgrading from a pre 14.2.1 version to a
version 14.2.1 or newer, IsAtLeast will incorrectly return true and
then fail trying to run mon ok-to-stop on a mon pod running a pre 14.2.1 version.
Signed-off-by: Sébastien Han <seb@redhat.com>
When a cluster is updated with a different image version, this triggers
a serialized restart of all the pods. Prior to this commit, no safety
check were performed and rook was hoping for the best outcome.
Now before doing restarting a daemon we check it can be restarted. Once
it's restarted we also check we can pursue with the rest of the
platform. For instance, with monitors we check that they are in quorum,
for OSD we check that PGs are clean and for MDS we make sure they are
all active.
Fixes: https://github.com/rook/rook/issues/2889
Signed-off-by: Sébastien Han <seb@redhat.com>
The check for whether to set the OwnerReferences is no longer
necessary. When passing the correct value to the apiVersion,
the OwnerReferences can be successfully set for OpenShift.
Signed-off-by: travisn <tnielsen@redhat.com>
This commit does multiple things:
* remove support for AllNodes where we would deploy one rgw per node on
all the nodes.
* a transition path is implemented in the code so that if someone has an
existing deployment, daemonsets will be removed and replaced by an
deployments.
* when using "instances", each rgw deployed has its own key which makes
Ceph reporting the exact number of rgw running, see:
```
[root@rook-ceph-operator-775cf575c5-bh4sr /]# ceph -s
cluster:
id: 611fcf39-0669-4864-9a12-debb35c0397a
health: HEALTH_OK
services:
mon: 3 daemons, quorum a,b,c (age 12h)
mgr: a(active, since 12h)
osd: 3 osds: 3 up (since 12h), 3 in (since 12h)
rgw: 3 daemons active (my.store.a, my.store.b, my.store.c)
data:
pools: 6 pools, 600 pgs
objects: 235 objects, 3.8 KiB
usage: 3.0 GiB used, 84 GiB / 87 GiB avail
pgs: 600 active+clean
```
Closes: https://github.com/rook/rook/issues/2474, https://github.com/rook/rook/issues/2957 and https://github.com/rook/rook/issues/3245
Signed-off-by: Sébastien Han <seb@redhat.com>
The memory check was missing and will be trigger if resources limit are
configured for the rbdmirror pod.
Signed-off-by: Sébastien Han <seb@redhat.com>
Add a 'ceph-version' label to application controllers in the same manner
as the prior 'rook-version' label to help with upgrades.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Allow the user to set annotations in the CRDs of the following operators which will then be set on
the resulting Pods (Deployments, StatefulSets and so on).
Operators:
* Cassandra
* Ceph
* CockroachDB
* EdgeFS
* Minio
* NFS
The Annotations related structures have been added to the
rook.io/v1alpha2 pkg.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
It's quite convinient to expose /var/log/ceph so that we can decide to
activate logs locally on the machine and see what's going on.
This is only a placeholder when a daemon is stuck crashlooping and we
want to allow administrator to gather log files.
We still do not log on file but this can be activated via a config
option passed to the centralized config option store.
For some daemons, which typically do not store any data (rgw, rbd-mirror
and mds) we had to propagate dataDirHostPath from the cluster spec to
each creation call so that the bindmount can happen.
Fixes: https://github.com/rook/rook/issues/2881
Signed-off-by: Sébastien Han <seb@redhat.com>
Add a `rook-version` label to all controller resources used by Ceph:
deployments, daemonsets, and jobs. Labels are added to controller
resources only and not to the pod templates within because changing pod
templates causes updates due to the label change. The controller
resources themselves are not updated with the label addition and
therefore don't cause an unnecessary upgrade.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
All usages of k8s go client are now also using the versioned `AppsV1() `
call for the client.
Updated MySQL and Wordpress, and Kube Registy examples to use apps/v1
Deployments.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
If someone sets limits to pod, we want to ensure the possible
experience, so we want to make sure that people do not configure
inapropriate values for certain daemons.
We decide to fail if the memory.limit is too low.
Signed-off-by: Sébastien Han <seb@redhat.com>
In the form of mon, mgr, mds, and rgw, convert the rbd-mirror to be
configured completely from the operator. This is a straightforward
conversion with one functional addition: the rbd-mirror daemon stores
*no* data and has no default data dir, so the concept of a `Dataless`
daemon is here introduced.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
The mgr orchestrator modules need the container image to run
the ceph image for blinking the lights when a disk is down
Signed-off-by: travisn <tnielsen@redhat.com>
This commit introduces the necessary changes to support the new
messenger feature coming with Ceph Nautilus (currently in development).
What changes? Now the monitor listens on two port:
* old 6789 for messenger v1, which will help us support older client
(e,g: krbd)
* new 3300 for messengers v2, which brings new improvement in the
messaging layer. This new transport layer brings numerous advantages
such as encryption improvement, speed improvement, pluggable nature to
support different network stack than TCP and many more.
We still have one Service IP, however it has 2 ports, see:
```
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
rook-ceph-mon-a ClusterIP 10.106.217.160 <none> 3300/TCP,6789/TCP 4h
rook-ceph-mon-b ClusterIP 10.99.36.175 <none> 3300/TCP,6789/TCP 4h
rook-ceph-mon-c ClusterIP 10.108.220.74 <none> 3300/TCP,6789/TCP 4h
````
The `ceph.conf` has changed and we don't force the port when using an IP
address (public addr etc). Ceph, depending on its version will naturally
start the monitors on their right port, 6789.
A new --ceph-version-name CLI argument has been added to the Rook binary
so that when the pod starts it passes the ceph version name and the
configuration of the ceph.conf, as well as daemon startup flags, happen
properly.
Given that the Rook Operator remembers the port of all the monitors it
deployed (through Pod definition), this change is not an issue and will
maintain backward compatibility.
Note that to test this you must build rook with dev container image,
which contains the dev Nautilus version. So you should do something
like:
`make -j4 BASEIMAGE='ceph/daemon-base:latest-master' IMAGES='ceph' build`
Resolves: #2525
Signed-off-by: Sébastien Han <seb@redhat.com>
Travis Nielsen
d-luu
Sébastien HanandRohan CJ
egafford
Blaine Gardner
giovanism
Alexander Trost
Huamin Chen