A new controller to bootstrap ceph-crash pod on Ceph nodes running Ceph
pods only.
This implementation is unfortunately a mix of 'hacks' to make the daemon
working correclty. The ceph-crash script faced different issues:
* it's not a daemon
* it does not have any key in cephx
* it runs ceph commands under the hood which need an admin key and a
ceph.conf
On upstream Ceph, ceph-crash needs to grow better, once that happens we
will improve our implementation.
This also enhances osd provisionConfig struct with DataPathMap
Pod volumes and volume mount needs DataPathMap to perform the right
actions on log and crash dir. Exposing DataPathMap makes that possible.
Obviously, this is exposing ceph crash reports on the host as
well as pushing them into the mgr.
Basically, if a daemon fails, it'll put its core dump into
/var/lib/ceph/crash, bindmounting this dir on the host, ensures that the
crashes don't get lost when the pod dies.
Example:
```
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !] kubectl -n rook-ceph exec -ti rook-ceph-crashcollector-minikube-574858b99c-zvg4z bash
bash: warning: setlocale: LC_CTYPE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_COLLATE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_MESSAGES: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_TIME: cannot change locale (en_US.UTF-8): No such file or directory
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ceph crash ls
[root@rook-ceph-osd-2-7644f99695-cljzh /]# pidof ceph-osd
13258 5415 5397
[root@rook-ceph-osd-2-7644f99695-cljzh /]# kill -SIGABRT 13258
[root@rook-ceph-osd-2-7644f99695-cljzh /]# ls /var/lib/ceph/crash/
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96 posted
... wait maximum 10 min (ceph-crash scraps every 10 minutes)
... the container will exit
[root@rook-ceph-osd-2-7644f99695-cljzh /]# exit
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !]
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !] kubectl -n rook-ceph exec -ti rook-ceph-crashcollector-minikube-574858b99c-zvg4z bash
bash: warning: setlocale: LC_CTYPE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_COLLATE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_MESSAGES: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_TIME: cannot change locale (en_US.UTF-8): No such file or directory
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]#
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]#
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ceph crash ls
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96 osd.1
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ls /var/lib/ceph/crash/
posted
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ls /var/lib/ceph/crash/posted/
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# tail /var/lib/ceph/crash/posted/2019-11-12_12\:56\:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96/log
1/ 5 mgr
1/ 5 mgrc
1/ 5 dpdk
1/ 5 eventtrace
-2/-2 (syslog threshold)
-1/-1 (stderr threshold)
max_recent 10000
max_new 1000
log_file /var/lib/ceph/crash/2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96/log
--- end dump of recent events ---
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Rohan CJ <rohantmp@gmail.com>
Following the Ceph OSD rework, my test environment regularly failed to
start OSDs, as they would start before the postStart lifecyle hook which
was chown'ing the log and data directories could finish. Pods failed to
start for an arbitrarily long time before starting successfully. This
was a manifestation of a race condition identified in Ceph monitors in
https://github.com/rook/rook/pull/3594#discussion_r312279176
Create a Ceph operator-level method to create an init container that
will chown the necessary directories for all Ceph daemons (any daemon
which runs as the ceph:ceph user-and-group). Also add this container to
expectations for Ceph pod templates in unit tests.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Allow users to specify overrides in the CephCluster CRD. The override
ConfigMap still exists for emergency situations and is mounted into
daemon pods directly instead of being merged into a Rook-created config
file.
Rook Ceph no longer uses a config file for managing daemons with the
exception of the OSDs which still generate a config in an init
container.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
With this change the memory limit is only checked if it has been set
explicitely in the cluster CRD file.
This allow the pod to be created following the Burstable QoS strategy.
Before this change an error was raised (error trying to get the memory
limit) in the spec.CheckPodMemory function and the pod with only a 'memory request' set, was not able to start.
Resolves: #3564
Signed-off-by: Juan Miguel Olmo Martínez jolmomar@redhat.com
Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
At the beginning of every container startup we now change the ownership
of every known ceph directories to ceph:ceph.
This will allow daemons to start properly as well as allowing daemon to
writes their logs on files.
This is needed because ceph daemon now run as 'ceph' instead of 'root'
Signed-off-by: Sébastien Han <seb@redhat.com>
It's quite convinient to expose /var/log/ceph so that we can decide to
activate logs locally on the machine and see what's going on.
This is only a placeholder when a daemon is stuck crashlooping and we
want to allow administrator to gather log files.
We still do not log on file but this can be activated via a config
option passed to the centralized config option store.
For some daemons, which typically do not store any data (rgw, rbd-mirror
and mds) we had to propagate dataDirHostPath from the cluster spec to
each creation call so that the bindmount can happen.
Fixes: https://github.com/rook/rook/issues/2881
Signed-off-by: Sébastien Han <seb@redhat.com>
Progress toward issue #2003.
Includes design from design doc PR #1578
Use init containers to create configuration for Ceph mgrs. There is only
1 init container in this design:
1. Using the Rook image, call the Rook binary to create Ceph config
files shared with the mgr daemgr container.
Once this init is run, the main mgr daemgr is run. Leaving room to use
the Ceph-versioned image in the future, call `ceph-mgr --foreground ...`
to run the Ceph mgr.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Add a 'test' package to the Ceph operator and define a test to verify
that containers produced by Rook-Ceph match what is expected. Because
this is for 'containers' and not strictly for 'ceph containers', this
could be moved a level up to the operator test package; however, if
other backends wish to use the container tests, they will likely need to
make modifications, and there is concern that this might make the Ceph
tests brittle.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Add a package called 'spec' to the Ceph operator to store resource
definition specs that are shared by all Ceph daemons.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Sébastien HanandRohan CJ
Blaine Gardner
Juan Miguel Olmo Martínez